Related
Hi all,
I just my very first PDA a HTC 3300. The thing is it has a portuguese ROM and I would like to install a English ROM. It is CID/Network locked and i tried flashing it via the SD method but with out results.
When I do the bootloader sequence I get a white screen saying checking SD contents and then it goes straight to the 3 colored screen not showing me the screen that is in the wiki site. Can anyone help me with this beginners problem.
Thanks a lot,
FreakyFreak
if is cid locked dont try 2 flash,U'll only brick ur device.buy unlock code from imei-check its worth it
Thanks. I did just that. It was quick and easy. And I've already flashed my device with the original HTC ROM. But I don't like it that much. Do you have any suggestion on which one to flash. I don't want any useless programs and the gps programs to be intalled. I got my own gsp prog that I want to use.
Thanks,
FreakyFreak
i use dopod shipp
Didn't I read somewhere that Dopod will lock the pda again? Could you clear this for me.
Thanks,
FreakyFreak
any solution????
FreakyFreak said:
Hi all,
I just my very first PDA a HTC 3300. The thing is it has a portuguese ROM and I would like to install a English ROM. It is CID/Network locked and i tried flashing it via the SD method but with out results.
When I do the bootloader sequence I get a white screen saying checking SD contents and then it goes straight to the 3 colored screen not showing me the screen that is in the wiki site. Can anyone help me with this beginners problem.
Thanks a lot,
FreakyFreak
Click to expand...
Click to collapse
has any one got the solution to that...? a have O2 Orbit that boots only to the HTC logo with the ROM version...IPL.....and SPL I`v tried to flash from the memory card but it does exactly the same as above. Can someone give a solution coz I`v tried with a working "Artemis" (i don`t know if it is CID/locked) but it is a working device,and the result is exactly the same,it shows "checking SD contents" and goes to the colored boot screen.
savich said:
has any one got the solution to that...? a have O2 Orbit that boots only to the HTC logo with the ROM version...IPL.....and SPL I`v tried to flash from the memory card but it does exactly the same as above. Can someone give a solution coz I`v tried with a working "Artemis" (i don`t know if it is CID/locked) but it is a working device,and the result is exactly the same,it shows "checking SD contents" and goes to the colored boot screen.
Click to expand...
Click to collapse
You tried to Formatting in FAT32?Please did it before.
no luck...
joke_drummer said:
You tried to Formatting in FAT32?Please did it before.
Click to expand...
Click to collapse
Yes I did...same thing...maybe we are missing some kind a file,to tell the Arteimg.nbh to start loading.....
you will not be able to flash from sd card.
to flash from sd card you need a specific service card. when this card is inserted, you can flash from the card.
with uspl, flashing from sd card is not supported.
regards,
thanx
fdp24 said:
you will not be able to flash from sd card.
to flash from sd card you need a specific service card. when this card is inserted, you can flash from the card.
with uspl, flashing from sd card is not supported.
regards,
Click to expand...
Click to collapse
...I thought so, well......if someone comes up with the solution,please post it. Thanx !!!
fdp24 said:
you will not be able to flash from sd card.
to flash from sd card you need a specific service card. when this card is inserted, you can flash from the card.
with uspl, flashing from sd card is not supported.
regards,
Click to expand...
Click to collapse
Not true, i succesfully flashed several times o2 wm6ship. ROM thru SD(ordinary 2GB, not even cleaned-only ARTEIMG.nbh in root). But it must be original operators ROM. Cannot be cooked rom or from diff. operator.
you right, except original rom for device. meaning correct model id and cid.
regards,
phsnake said:
Not true, i succesfully flashed several times o2 wm6ship. ROM thru SD(ordinary 2GB, not even cleaned-only ARTEIMG.nbh in root). But it must be original operators ROM. Cannot be cooked rom or from diff. operator.
Click to expand...
Click to collapse
Fellow Android fans. I am out of ideas and could use a benevolent lending hand of help. I have been searching this site for three days now and have attempted everything I can think of (and have found in searches) to get my phone back up again. I have found a couple of posts where people were stuck at the splash screen but just wiping/reflashing typically fixed their issue. I however cannot get past the G1 screen after each boot regardless of the ROM NOR can I even access my SD card which I suppose are two different problems all together.
HISTORY: I have had every modified ROM since JF released his first version last year. I have flashed, backed up, changed radios, put apps/cache/data to my SD (8gb Class 6) with rare issues. The couple times I did get stuck at the splash screen, I would just use Fastboot to go back to a backed up nandroid ROM. But then I decided to go to the latest JF Lucid 1.5 ROM. That’s when it all went downhill. (Certainly no one's fault but my own I know) Though I wiped initially, it seemed that some links were still stuck on the phone for I couldn’t get my apps to SD. The ROM was working fine and I could install market apps without issue, but I wanted to have 100+ apps for absolutely no good reason other than “because I could.” So I was talking with Marcus who suggested I repartition my SD card. This is where the noob came out of me. My trial period had ended with Partition Manager so I used Window’s Device Manager to delete the partition (I backed everything up thankfully) After I did so I powered down the phone to see if all was ok. It wasn’t. It just gets stuck on the G1 screen.
Attempts to Restore:
• I can access the Recovery tool and wipe/flash an older known working update.zip file and it says that it loads successfully, but when I reboot I get stuck at the G1 screen.
• I can access Fastboot and flash a backed up ROM (known working backups that have worked before mind you), it says loaded successfully, but when I reboot it gets stuck at the G1 screen.
• When I insert my SD card into a card reader I cannot access the card as it says “insert disc”.
• I went into Windows Device Manager and it shows that have a memory card but says “Unreadable”.
• I put an older 2gb SD card in the phone and loaded an older RC33 ROM and flashed it. It flashed just fine but gets stuck at the G1 screen.
• So I downloaded the Ubuntu Live CD and attempted to reformat my SD card via Gparted. No dice. It won’t even recognize it as an available disk. (I tried both with it in my phone connected via USB and in the micro SD card adapter and card reader)
I have Windows XP, a Ubuntu Live Cd, JF Lucid 1.5, and a headache after the numerous failed attempts at getting this straight.
I am completely out of ideas. I am not however, familiar with ADB so I am really hoping that there are some commands or something out there can bring my phone back from the dead. If I have to buy a new SD card, so be it, but I am trying to avoid having to buy a new phone. Long story short, I suppose my question is two fold:
1) By deleting my partition did that ruin the SD card and ultimately cause these boot loop issues? I just can't figure that out how that is possible since a partition isn't even a requirement of flashing a ROM
2) Is it possible to reclaim my phone and if so, how?
Thank you very much for your time and any suggestions...
Haters Need Not Post
Interesting problem you got there. Not that i have any answers for ya, but a few ideas. I've read the boards here for a lil while at least, and i know that if you had custom boot images, the second one can cause hangs when switching to certain roms. You didn't say, have you tried flashing the original dreamimg.nbh? When you formatted your sdcard, did you have apps to sd and that dalvic cache to sd card too? possibly pointers on the main partition pointing to a non existing mount point. Hope you get it up and running again
what spl were you on? have you tried the sapphire spl? or hardspl?
I've done this before too. Easiest way to fix it is to flash DREAIMG.NBH, and then re-install test keys and the SPL of your choice and reflash JF1.5
I forgot to mention that yes I had apps, data, and dalvik all moved to the SD card but NO custom boot images. I am assuming the data or dalvik move is what caused the initial problems when I flashed to ADP 1.5. I currently am running the HardSPL (HSPL10.95.3000)
I haven't tried flashing the DREAIMG.NBH yet but assumed it wouldn't work as I have flashed numerous other ROMs to no avail. I suppose I shouldn't assume. I will try that today. On the other hand, any ideas on how to reformat (or just make it recognizable for that matter) my SD card?
Thanks gang!
bahnburner said:
I've done this before too. Easiest way to fix it is to flash DREAIMG.NBH, and then re-install test keys and the SPL of your choice and reflash JF1.5
Click to expand...
Click to collapse
How do I go about reinstalling the test keys? And do I need to flash to an SPL other than the HardSPL (which I have now) for the DREAIMG.NBH to flash appropriately?
Thanks man
gPhunk said:
I forgot to mention that yes I had apps, data, and dalvik all moved to the SD card but NO custom boot images. I am assuming the data or dalvik move is what caused the initial problems when I flashed to ADP 1.5. I currently am running the HardSPL (HSPL10.95.3000)
I haven't tried flashing the DREAIMG.NBH yet but assumed it wouldn't work as I have flashed numerous other ROMs to no avail. I suppose I shouldn't assume. I will try that today. On the other hand, any ideas on how to reformat (or just make it recognizable for that matter) my SD card?
Thanks gang!
Click to expand...
Click to collapse
flashing the nbh should be the way to go .. it basically images the whole phone .. whereas flashing the ROM files does not .. each update.zip only deletes the /system portion of the phone .. performing ALT+W deletes the /system AND /data portions of the phone
flash the nbh like you were starting from scratch with the root process .. go back thru all the steps .. put the new recovery.img etc blah blah blah
odd
I'm not real sure as far as the test keys go. But as long as your phone is rooted with a hard spl (which is just a edited engineering spl) you should be able to reflash any rom including rc29 (dreamimg.img) just rebember to go thourgh the bootloader to do so not recovery. The very way you originally rooted you dream.
Have you tried simply doing a wipe yet? Sounds like you need to clear out the /data partition, and be patient when it boots up the first time after a wipe - it can take a while.
LucidREM said:
flashing the nbh should be the way to go .. it basically images the whole phone .. whereas flashing the ROM files does not .. each update.zip only deletes the /system portion of the phone .. performing ALT+W deletes the /system AND /data portions of the phone
flash the nbh like you were starting from scratch with the root process .. go back thru all the steps .. put the new recovery.img etc blah blah blah
Click to expand...
Click to collapse
Thanks guys - The DREAMIMG flash worked. You truly are life savers. (My wife has been on my ARSE the last 4 days for this.. lol) I do have a quick question for Lucid.
First, thank you for ALL the fine work you have done. Basically all of my ROMs have been yours (and JF's of course). So my question is with the linking of the data and dalvik cache. Even though I wiped when flashing to 1.5 it seemed I still had file folders stuck in my partition which were preventing me from updating the links again. What should I have done to re-link them appropriately? I tried your "undodata / dalvik" scripts but still couldn't get them linked.
Again guys - Thank you
daveid said:
Have you tried simply doing a wipe yet? Sounds like you need to clear out the /data partition, and be patient when it boots up the first time after a wipe - it can take a while.
Click to expand...
Click to collapse
Ya I wipe with every flash. I even let it boot up overnight (as I read that it can take a while) but when I woke up it was still at the G1 screen. Have no idea what caused this but the DREAMIMG.nbh flash worked.
great news
Good to hear you got your dream up and running again. I'm happy to see the community so willing to help. Keep posting issues, keep responding to those who you think you can help. This is the reason why xda-devlopers site is the go to site for xda issues.
SDcard probs....
Did you ever get your SD Card working again?
If not, download the free version of killdisk from http://software.lsoft.net/KillDiskSuiteFree-Setup.exe and use it to wipe the entire sd card with zeros. After that, remove the card from your windows box then reinsert it. Windows should ask you to format it and you should be golden. I've seen this problem happen with flash drives as well and this always gets them back.
I suspect that the disk is dead. In any case, windonkey isn't the right thing to use to try to recover it. Boot on the livecd, insert the disk, type 'dmesg', which should output the device file, i.e. 'sdb', then as root do a "dd if=/dev/zero of=/dev/sd?" where ?=whatever that was from 'dmesg', wait until it finishes, pull the card, push the card, run gparted. More than likely, the output of 'dmesg' will show a problem with the card, in which case, melt it, burn it, break it in half, throw it out, warranty it, whatever makes you happy that results in you not accidentally trying to use the thing.
ipaqkiller said:
Did you ever get your SD Card working again?
If not, download the free version of killdisk from http://software.lsoft.net/KillDiskSuiteFree-Setup.exe and use it to wipe the entire sd card with zeros. After that, remove the card from your windows box then reinsert it. Windows should ask you to format it and you should be golden. I've seen this problem happen with flash drives as well and this always gets them back.
Click to expand...
Click to collapse
Thanks for the suggestion. Tried it but it couldn't write to it. I suppose it's hosed. Just ordered another. Thanks for your help though!
Can flash DREAMIMG.nbh - but not a modded ROM
I was able to regain my phone by flashing DREAMIMG.nbh. (thank you all) I followed all of the directions (to the "T") from this post (http://www.kyubinc.org/files/AndroidMod.zip) that I saw Lucid recommended in an April post. I was able to get through the steps and rooted the phone successfully (made sure I could get "#" when typing "su" into Term Em) BUT when I go to flash RC33, I get hung up at the freaking G1 screen AGAIN !!! <<I'd pull my hair out if I had any>>
I let it boot for 90min before I decided to request suggestions so I don't think it's a patience thing. The only error I noticed while rooting was when I entered the recovery console, at the top it said "Can’t open /cache/recovery/command". Can't remember if that was normal or not as it's been so long but it let me successfully flash the update.zip from the SD card so didn't think much of it. But when I rebooted it is stuck at the G1 screen.
Now I know that my 8gb SD card is hosed so am using the 1gb that came with the phone until I get my new one. So I am using a completely different SD card but am getting the same "stuck at the splash screen" issue. Anyone have an idea what in my phone is surviving all of these wipes/flashes that is perpetuating this issue? It just doesn't make since that I can flash an OEM ROM (DREAMIMG.nbh) just fine but not a modded one (RC33). I certainly am not ruling out user error, but it just seems like a directory or file or WHATEVER inside the phone has been corrupted or something because it's the only constant in this whole process.
Thanks again
dunno
When you went through the root process again did you reinstall the hard spl again. And then protect it
gPhunk said:
I was able to regain my phone by flashing DREAMIMG.nbh. (thank you all) I followed all of the directions (to the "T") from this post (http://www.kyubinc.org/files/AndroidMod.zip) that I saw Lucid recommended in an April post. I was able to get through the steps and rooted the phone successfully (made sure I could get "#" when typing "su" into Term Em) BUT when I go to flash RC33, I get hung up at the freaking G1 screen AGAIN !!! <<I'd pull my hair out if I had any>>
I let it boot for 90min before I decided to request suggestions so I don't think it's a patience thing. The only error I noticed while rooting was when I entered the recovery console, at the top it said "Can’t open /cache/recovery/command". Can't remember if that was normal or not as it's been so long but it let me successfully flash the update.zip from the SD card so didn't think much of it. But when I rebooted it is stuck at the G1 screen.
Now I know that my 8gb SD card is hosed so am using the 1gb that came with the phone until I get my new one. So I am using a completely different SD card but am getting the same "stuck at the splash screen" issue. Anyone have an idea what in my phone is surviving all of these wipes/flashes that is perpetuating this issue? It just doesn't make since that I can flash an OEM ROM (DREAMIMG.nbh) just fine but not a modded one (RC33). I certainly am not ruling out user error, but it just seems like a directory or file or WHATEVER inside the phone has been corrupted or something because it's the only constant in this whole process.
Thanks again
Click to expand...
Click to collapse
and you followed these steps precisely?
http://files.lucidrem.us/jf/ROOT/g1_root.txt
just making sure
O dear, I am experiencing the same issue - I pulled my SD out this morning was not able to get it recognized, and upon reboot got stuck on the splash screen. I have wiped several times and am still stuck at splash 2. I am at work so cannot try to access my card thru my PC to see if I am having the same problem as gPhunk, but can only assume that i fried my SD card. I am a n00b, so really nervous of my ability to get myself back up and running.
To install the dreaming.nbh, is it the same as any other flash - rename it update.zip and ctrl-s from the recovery screen? Does that bring back to an RC build so i have to re-root?
Help! And thank you so much!
LucidREM said:
and you followed these steps precisely?
http://files.lucidrem.us/jf/ROOT/g1_root.txt
just making sure
Click to expand...
Click to collapse
Similar - but the ones I followed were these
http://www.kyubinc.org/files/AndroidMod.zip
I will try this set this time..
Hello, i have noticed something rather strange? and want to know if this is a normal / typical Bootloader Behavior. I will post a Video link:
http://www.youtube.com/watch?v=GCSaQi9cLrw
the thing is, the last time i entered the bootloader i noticed that now i must wait much longer for it to become fully loaded ? Normally after starting the phone, the bootloader needs several seconds and it's up and running. Now i see a strange Loading message and must wait. The actual Loader is working normal, but this is not the thing i was used to ? Do anyone know if this is some sort of a problem, do i need to reflash the HSPL again. I have used the device with many roms, recently i have done Task 29 to clear it, but i don't thing it's related. Everything was fine until today ?
What do you think ?
Definitely not normal bootloader behavior.
I would try flashing HSPL again.
You're right, Task 29 does not affect this partition.
If i want to reflash it ? what must i actually do. Do the normal flash, described in the HSPL post ? or there is something different. I don't want to brick the phone
I would first try to download the .nbh and custom ruu.exe file and try flashing that way;
Sync with ActiveSync, place the RUU.exe and .nbh file in the same folder and run the ruu.exe
If you try the autoinstaller, you will likely get the commercial use error, so try the other method first. If you get the error, just open a ticket and explain your situation.
So you say, to replace the 2.51 HSPL with the 2.5.nbh file using customruu for Topaz. Just like flashing any normal rom ? Is there a problem that i have an active rom on the Device ? Can that reflash procedure brick the phone, i mean, if the bootloader goes wrong, this will be a serious problem
EDIT: i did the reflash. No change after flashing 2.51 again. I actually have no idea what this is ? but it does not affect the phone directly. If somehow the partition is corrupt , partially, as long as it works i will be fine
If you have other ideas ?
No other ideas.
It could be your partition is becoming corrupt or perhaps screen calibration is delayed for some reason.
Actually i have tested XDAndroid few times. But it's all SD related there. I don't think that it's trying to change something in that Boot partition ?
The thing is, i have done task 29 after that and there was nothing new or strange with the bootloader. Actually as much as i know, the SD builds dont even touch the NAND flash on the device, at least there are non for Topaz yet...
The new behavior of the bootloader came from nowhere and not after making some radical changes to the device. Just like that...
Correct, XDAnroid wouldn't affect the bootloader partition.
You may need a new memory chip eventually.
porkovich said:
Hello, i have noticed something rather strange? and want to know if this is a normal / typical Bootloader Behavior. I will post a Video link:
http://www.youtube.com/watch?v=GCSaQi9cLrw
the thing is, the last time i entered the bootloader i noticed that now i must wait much longer for it to become fully loaded ? Normally after starting the phone, the bootloader needs several seconds and it's up and running. Now i see a strange Loading message and must wait. The actual Loader is working normal, but this is not the thing i was used to ? Do anyone know if this is some sort of a problem, do i need to reflash the HSPL again. I have used the device with many roms, recently i have done Task 29 to clear it, but i don't thing it's related. Everything was fine until today ?
What do you think ?
Click to expand...
Click to collapse
do you have a NBH file on your SD card, that could cause this screen to appear.
cmonex said:
do you have a NBH file on your SD card, that could cause this screen to appear.
Click to expand...
Click to collapse
Yes, that was the problem. I removed the SD card and the problems was gone. One of the files on the Memory Card was the cause of the problem. Thanks mate !!
cmonex said:
do you have a NBH file on your SD card, that could cause this screen to appear.
Click to expand...
Click to collapse
Good to know this cmonex .
We know boot loader does load NBH file from SD, and we just ignored that .
Hey guys,
I have a problem with my bootloader.
Tried to downgrade my DHD (it's on 1.75.111.2 - Telekom-Branding) to get root.
So I created a goldcard etc. No problems.
Then tried to open the bootloader. It opens, but nothing happens. I can't even move the selection. I have to take out the battery.
Tried it again from the start, but still the same...
Tried it with other SD-cards (empty ones and goldcards), but it's everytime the same: SD-card -> freeze, no SD -> no freeze
Can anyone help me?
Regards
Eneco
When I opened the bootloader, it'll freeze , maybe a minute, then it'll show that it scans your SD card for specific files, if it finds a file with the specific name it'll ask you to install it. How long did you wait before pulling your battery?
I tried waiting up to 30 minutes, but nothing happens...
Unleash your BeasT !!!
Eneco said:
I tried waiting up to 30 minutes, but nothing happens...
Click to expand...
Click to collapse
I'll save you some time & effort...
How to downgrade:
http://forum.xda-developers.com/showthread.php?t=905003
How to root:
http://forum.xda-developers.com/showthread.php?t=857537
How to get S-OFF:
http://forum.xda-developers.com/showthread.php?t=855403
Android Flasher 1.6.1
http://forum.xda-developers.com/showthread.php?t=794638
follow these guides to the letter and you will be fine... there is also another tool called "Android Flasher 1.6.1" you that saves you from all adb commands if you dont knw them..with it u can change ur splash screen, recovery, radio,bootanimation... also when everything is done.. do a full wipe(full wipe deletes everything on the phone except recovery and boot and radio ofcourse.. and EASY FULL WIPE dnt delete ur data but delete everything else so only full wipe is needed in this case) before installing a custom rom. DO EVERYTHING AS IN THE SEQUENCE OF THE LINKS I HAVE GIVEN YOU.. links are all above.. oh btw the zip attachment u need to unzip it and u will find another 2 .zip files.. u just place those in ur sdcard goto bootloader then recover.. install zip from card.. and then click on the one you want... got luck
Leather|Face said:
I'll save you some time & effort...
Click to expand...
Click to collapse
Thanks for your efford, but I think you didn't get my problem right...
I can't downgrade because everytime I go into the bootloader with a SD-card in my device, the bootloader will freeze... I can't even use the bootloader with a formatted card inserted
Eneco said:
Thanks for your efford, but I think you didn't get my problem right...
I can't downgrade because everytime I go into the bootloader with a SD-card in my device, the bootloader will freeze... I can't even use the bootloader with a formatted card inserted
Click to expand...
Click to collapse
nothing happens when you move ur volume keys up and down and press power button for selection ?
Format your SD to FAT32 using full format, no quick format. Then try again. You should do that to a few cards.
Sent from my Desire HD using Tapatalk
Leather|Face said:
nothing happens when you move ur volume keys up and down and press power button for selection ?
Click to expand...
Click to collapse
Nothing happens, only works without SD-card in my DHD
Already tried it with full format and different cards, always the same problem...
Eneco said:
Nothing happens, only works without SD-card in my DHD
Already tried it with full format and different cards, always the same problem...
Click to expand...
Click to collapse
Hmmm thats a strange issue cuz i atleast never heard abt it... Btw do u put rom in the same card which u used for the making of goldcard?
Sent from my Desire HD using XDA Premium App
Leather|Face said:
Hmmm thats a strange issue cuz i atleast never heard abt it... Btw do u put rom in the same card which u used for the making of goldcard?
Click to expand...
Click to collapse
Yes, same card. But it even freezes when there's no rom on it...
Searched for it on google and other boards, but found noone with the same problem.
Maybe I have to try to call the support, but then I have to explain how i found out that it doesn't work...
just remake the goldcard
Sent from my HTC Desire HD using XDA App
Memono11 said:
just remake the goldcard
Click to expand...
Click to collapse
Already did that like 20 times
Maybe you could flash a RUU, maybe it'll update your bootloader or something. I don't know if it'll work, but it couldn't hurt by trying.
johan12330 said:
Maybe you could flash a RUU, maybe it'll update your bootloader or something. I don't know if it'll work, but it couldn't hurt by trying.
Click to expand...
Click to collapse
Tried that today, but can't flash with RUU. Also tried with goldcard inserted and those adb-commands from downgrade-thread before executing a RUU, but it only goes until "actualising signature" (or something like that, i have a german version) and than it won't proceed
Eneco said:
Tried that today, but can't flash with RUU. Also tried with goldcard inserted and those adb-commands from downgrade-thread before executing a RUU, but it only goes until "actualising signature" (or something like that, i have a german version) and than it won't proceed
Click to expand...
Click to collapse
make a short video of where u are stuck... cuz i aint giving up on u doode.. i will rest when im done with ur problem.. i wanna solve it now. the video will give me an insight.. if u can please.
Leather|Face said:
make a short video of where u are stuck... cuz i aint giving up on u doode.. i will rest when im done with ur problem.. i wanna solve it now. the video will give me an insight.. if u can please.
Click to expand...
Click to collapse
ok, took me some time to upload it because of my crappy internet bandwith...
First of all i remade the goldcard (full format, hex-editor-steps...), than i used the adb-commands from downgrade-thread, that's the reason there's no actual version displayed, but i get the same result without those, than i executed the RUU (1.39.111.1, tried 1.32.405.3 too, but couldn't find my recent version, think that's the main problem while updating with RUU).
On my DHD there's a black screen with HTC on it the whole time...
Here's the video of the RUU-update. Tried to translate those steps...
Will upload videos of goldcard-creation, downgrade-steps and bootloader-freeze too, if you want to see those
//Edit: It seems that I can't add the video directly, so here's the link
what program are you using there for adb commands?
also do you make the gold card with MMC2?
have you tried another card?
I'm using standard Windows command prompt (cmd),
took the mmc2
and tried several other cards, even some that worked for my friends
We got at least one other DHD with that symptoms: http://www.android-hilfe.de/root-ha...me-down-im-bootloader-funktioniert-nicht.html
Both DHDs have a T-Mobile branding (1.75) - maybe T-Mobile or HTC changed something on the bootloader
Maybe manually flashing the bootloader is an option, don't know right now if that's possible with S-On
which tool are u using ? cuz i never used that tooll ur using in the video
HI BOYS...
I have had a problem with reflash to the HD2, installing WP7, the new version with NODO, has made to depart the whole procedure without inserting the SD...
When I have realized of I mistake it, I have reformatted the DEVICE and referred everything... but at the end of the trial when it had to load the WP7 you/he/she has given me: 1234FATAL hits 4
Don't I now succeed in making to correctly depart WP7, WE can help me in this problem to resolve ?
HELP ME!
have you try to flash to stock ROM winmo 6.5?go to tricolor screen and flash back to original ROM,then task29 your SD card and follow the steps to re-flash WP7 ROM. Hope this help.
in practice reloading WP7 I have noticed that he/she doesn't write me nothing on the SD, I will now try to flash the original ROM...
If some good boy has other ideas they are here to try...
<<<RESOLVED>>>!!!!!!!!
Return back to the origins is always the best solution--- now the OS Funziona!!!!!!!!!!!
Tomorrow I retry to install WP7,
THANKS,
I hope both profit to you this post,
Regards and good flash
fatal hit possible cure if happens
first sorry i didn't see this earlier but had same problem if you have an extra sd card like 2gb and reflash rom then use the other card so nand can clean up the mess in part4.nbh don't ask me why but work for me also if it still happens you might what to check sd card and make sure it class 2 or if first partition is degraded