Database Users

End call doesn't end call...

I have the 8525 with WM6 installed. About 1 in 40 times, the End Call option doesn't display that the call ended (on my side). I attempt to still talk to the other person but I can't hear them, though. After about 2 minutes later, it finally ends the connection. I must do a soft reset to temporarily fix it; the only drawback is that the most previous call isn't shown as being made.
About 1 in 80 times, the call attempts to be made, but doesn't connect at all. I try to End Call, but it seems to "freeze" the screen. The "Close screen" seems to help, as in 30 seconds the device finally quits trying to connect.
Another thing I noticed, after the phone freezes, the antenna signal drops to zero and then returns to about 2 - 3 bars of signal, about 5 seconds later. I'm not sure if that is the cause of the phone hanging, or not. Is there any kind of software to resolve this issue? It's really annoying! Thanks for any help!

is that a cooked rom or official? what's your radio version and carrier?
I'm thinking u need a different radio verson...(u must have hardspl to flash another radio version)...

I got the 8525 as a reconditioned from AT&T about 3 weeks ago. It came with WM5, and I had the above calling issues back then too. I then was informed on the boards here to upgrade to WM6, which I downloaded from HTC, via the AT&T website link.
As for programs, I removed the AT&T "bloatware" via the hard reset trick. Later, I installed S2U2, HTC Streaming Media, HTweakC2.1b, and the PTTFix software. One other program on the 8525 is OCN8 -- for my iBlue 737 Bluetooth GPS device. There are no other files that I can recall, except maps, songs, internet .jpgs, and (camera) pictures/videos.
Settings:
ROM Version: 3.62.502.3
ROM Date: 10/11/07
Radio Version: 1.54.07.00
Protocol Version: 32.86u.7020.23H

I do appreciate and try to understand all of the replies that I receive, and I do try to respond within a timely manner. I understand that people are busy and may have other careers as well. However, the thing that makes me pull my hair out is when someone starts to assist my problem, then just ditches the thread after my reply, without so much as an "I'm sorry, but I'm not able to solve your problem" at the minimum! Normally, I give a 48 hour window for the helper or any more helpers to reply before I get frustrated, but it's been way past that timeframe now!
I've noticed that phenomenon on 3 of my prior posts, each are on different subjects. It seems that after the first reply, no one but the original helper responds! If that original helper is busy, or just forgets about the thread, then I'm screwed over.
Sorry to rant, but I tried looking all over the boards for the best Radio program. All I seem to find is best ROMs, but not really Radios. I've seen 2 other Radio programs in signatures, but I'm not sure what one would be best for my purposes. I've seen mention of 1.47.30 & 1.47.00.10 in some members' signatures, but I'm hesitant to just "trial and error" one, for fear it would damage my device. I currently have the WM6 default 1.54.07.00 version, but it freezes up on making some calls and more often on ending a current call.
Anyone else for ideas or opinions on what Radio program to use? Please back up your opinion with facts when possible. I am not an expert on the device, just a new user who is afraid to ruin my investment.
Much thanks to all who read this post and reply to it!

Hi, just saw your thread & did not know U were still hanging....
I would try radio 1.48.00.00 first, then 1.47.00.10 or 1.50.00.00 if necessary. Seem's a lot of at&t users liked 1.48 from what I noticed (don't forget hardspl - use mrvanx guide in the Mobile 6 forum section)...
Here's the 1.54 thread with pro's, con's, and 1.48 at&t comments...
http://forum.xda-developers.com/showthread.php?t=334697&highlight=radio+1.48

galaxys said:
I would try radio 1.48.00.00 first, then 1.47.00.10 or 1.50.00.00 if necessary. Seem's a lot of at&t users liked 1.48 from what I noticed (don't forget hardspl - use mrvanx guide in the Mobile 6 forum section)...
Here's the 1.54 thread with pro's, con's, and 1.48 at&t comments...
http://forum.xda-developers.com/showthread.php?t=334697&highlight=radio+1.48
Click to expand...
Click to collapse
Thanks for the reply! I will do the hardspl first, then try to install the 1.48.00.00 Radio. I'll report back with details in a day or two.

My current Image Version is 3.62.502.3, and I am attempting to update it to 3.54.255.3.
I keep having errors while trying to install Radio Version 1.48.00.10 to my 8525, after opening RUU_Inside.exe on my laptop. I've even tried to install it from my microSD card, but I get the tri-color screen instead of the white background with text screen, shown in the online example. The 8525 ActiveSyncs to the computer fine, and the screen shows:
"Updating the ROM image on your PDA phone ...
Please do not remove the USB connection from the PDA Phone or launch any program during the update process.
Remember the operation will take about 10 minutes."
As soon as the above grey box pops up, ActiveSync drops after that box appears, then I get the following message:
"Error [260]: CONNECTION"
I've installed Hard-SPL v.7 onto the 8525 already. Not that it seems to make a difference, I believe, but other programs that are on it include: WMXL 8525 Keyboard Fix, S2U2 1.16, Resco Explorer 2008, PTTFix, MunduRadio, & HTweakC 2.1,

not sure, but did a "search" for error 260 & seems to be your pc usb port:
(use xda google search for any questions)
http://forum.xda-developers.com/showthread.php?t=368624
btw, u are using XP & not Vista on u'r pc.

My laptop has XP (Media Center Edition). I did a search as well, but it was dated back to 2007; I wondered if there was a newer fix than the one on that page, as it referenced the prior version of Hard-SPL. From the sounds of it, I have to install WM5 again, change the radio version (which was the only thing I need to adjust, as the voice calls have been a pain since day one), then reinstall all of my programs again.
I've heard people create ROMs. However, the radio settings can't be included in them . . . or am I off-base with that presumption? I am not that experienced to cook my own ROM, as I am still learning the nuances.

Well I broke down and went on AT&T's online chat. Sounds like there is no software to install to fix the issue. I hoped the radio version switch would help, but I couldn't get it to install! I guess it's back to the Replacement Depot on Sunday. I should return my device to WM5, which I hope to find the thread for on the board.
If interested, here's the key parts of the conversation:
Me: Hi, my 8525 is giving me trouble making and ending calls. It sometimes hangs, and doesn't quit trying to place the call. Once I reset it, it's fine until I try to end the call, it hangs up the call, but not showing so on my side
AT&T: Can you try hard shocking the phone for me please? A hard shock is taking the battery out while the phone is still powered on, and then power the phone back on once the battery is back in the phone.
Me: I received it as a reconditioned from the AT&T depot in Pittsburgh, PA. About 20 minutes later, it did the same thing, so I upgraded to WM6 and still the same issues
AT&T: If you continue to have these issues with this phone, you will need to take the phone back to the Device Support place where you got it from.
Me: Is that a common issue?
AT&T: Sometimes it is with at reconditioned phone.
. . .
AT&T does not have an update for the Windows Mobile 6 at this time. However you may check out HTC website at www.htcamerica.net/support/default.html and see if they have an update for this software for this phone.
Me: So it's the phone, not the software?
AT&T: Yes that is correct. There is a defect within the phone that is causing these issues. If you continue to have these issues with this phone, you will need to take the phone back to the Device Support place where you got it from.
Me: Are you able to explain what causes it that the Device Center doesn't catch it
AT&T: I am not sure what causes this issue.
Me: Like should there be anything done to prevent that from happening?
AT&T: It is hard to tell with reconditioned phones. It may be something that can be fixed and it may not. If the hard shock does not fix this issue and the Device Support cannot, then you will be given another phone.

ohpfan said:
My laptop has XP (Media Center Edition).
I've heard people create ROMs. However, the radio settings can't be included in them . . . or am I off-base with that presumption? I am not that experienced to cook my own ROM, as I am still learning the nuances.
Click to expand...
Click to collapse
Ok, your signature is looking good and that is some conversation with good old at&t...bla bla bla
To answer your question above, the chefs cooked roms do not include radio (because everyone around the world uses a different one). But, the Official WM6 rom's do (posted wiki & wm 6 section). So, why don't u flash the official wm6 since u have hardspl now? This in itself may resolve u'r issue (if u don't get the driver pc 260 error)! why would u want to flash wm5?

I was going to return my 8525 to the Service Depot where I got it, is why I mentioned returning it back to WM5 status. However, I wanted to see if it could be fixed by software first, but considering the above online AT&T chat, I am definitely going to get it replaced again. So, I want the 8525 to not show my "3rd party software" to ruin the warranty. I had the 8525 to individually remove the CABs under Remove Programs, and then I did a Clear Memory to default for good measure. Hopefully the Service Depot won't say anything about the device being altered that way.
Oh yea, I am going to get it replaced on Thursday. I will try to get them to give me a new one, not a reconditioned. That is, if there are even any new ones around anymore! It'd be a miracle if they gave me a new 8925 Tilt instead . . . lol I know -- keep dreaming! Wish me luck with a new 8525 though!

Well, I exchanged my current 8525 for another reconditioned one. The repair guy actually asked if I heard of the xda website (for help with my device!), lol!! He didn't go into detail about what this site does, just asked if I heard about it, and I affirmed that I did. Possibly he found traces of programs that changed settings, but he didn't rat me out. He sounded like he was confident that he fixed the phone dialing issues, but gave me a new one "just in case".
As soon as he gave it to me, it booted right up, without the calibration screen. He flat out told me to calibrate it, but it didn't appear. I was trying to see if it would act up with the dialing again, but noticed it didn't save the numbers on my SIM! I then decided to get rid of the bloatware via the Clear Programs and that lead to the calibration screen, finally.
So far it seems to work fine! I made about 6 calls this time and they seem to end properly. There is a slight 30 second or so delay when I press the button with the "red phone symbol" [end call] before the screen lights up again though. Is that normal?
Oh, I've only loaded up S2u2 so far. I will reinsert the others onto my memory card today sometime before work.
Again, so far so good! Only real issue I see is that the ringer volume is very low when the device is in the carrying case I have it in. I will search on here for a ringer volume changer, soon!

Glad U were able to get another phone!
"red phone symbol" [end call] before the screen lights up again though. Is that normal?
No, should end in a few seconds...doesn't seem it's even assigned to the phone (U can use Schaps Advanced Config tool to do this and many more good tweeks).

galaxys said:
No, should end in a few seconds...doesn't seem it's even assigned to the phone (U can use Schaps Advanced Config tool to do this and many more good tweeks).
Click to expand...
Click to collapse
The "end call" does it's job, just that the screen is dim then it takes like 30 seconds to brighten again to show that the call is ended. Possibly it's something I have set up wrong. I notice the blue backlight for the keypad doesn't light up until a minute of my typing on it for a text; it's like a delayed reaction.
(I have the unlimited text/pix/vid plan, as of this past Thursday.) A bit off-topic, but are the Yahoo, AOL, & MSN IM programs considered a text or do they use kilobytes of data? I could use the programs over the Wi-Fi if I had to, but I don't want to pay extra for data kilobytes.
Lastly, I have never downloaded the Schaps Configuration. What all settings should I change? I know it's mostly based on personal preference, but what are some common alterations using it? For instance, I set the alarm to wake up to, but it's only a short beep sound. If I really was sleepy, I would probably sleep right through it! Does this program (or any others) configure any song on my device to be the alarm? I've already done that to the ringtone (where the first 30 seconds of any song is my ringtone).

ohpfan said:
The "end call" does it's job, just that the screen is dim then it takes like 30 seconds to brighten again to show that the call is ended. Possibly it's something I have set up wrong. I notice the blue backlight for the keypad doesn't light up until a minute of my typing on it for a text; it's like a delayed reaction. check in Settings>System>Backlight & Keyboard Backlight.
(I have the unlimited text/pix/vid plan, as of this past Thursday.) A bit off-topic, but are the Yahoo, AOL, & MSN IM programs considered a text or do they use kilobytes of data? I could use the programs over the Wi-Fi if I had to, but I don't want to pay extra for data kilobytes. I don't use them, but it should be treated as MMS text.
Lastly, I have never downloaded the Schaps Configuration. What all settings should I change? I know it's mostly based on personal preference, but what are some common alterations using it? For instance, I set the alarm to wake up to, but it's only a short beep sound. If I really was sleepy, I would probably sleep right through it! Does this program (or any others) configure any song on my device to be the alarm? I've already done that to the ringtone (where the first 30 seconds of any song is my ringtone).
Schaps has a number of Performance, Power, UI settings, etc., but no alarm ringtones. U may not need Since u'r using HTweekC.
Click to expand...
Click to collapse
see info above...

Im tired of this F-ing phone freezing

it would just freeze randomly when left alone...and i wouldn't even know unless i push the standby key and it doesn't turn on or the time on the LCD is way wrong
worst is i cant get any calls while it's frozen and i can never recieve a txtmsg sent while it's frozen..even if i reboot the txtmsg will never be recieved
even worst is when it freezes while the lcd is on...it just sits there like that draining the battery
i cant figure out why..i report,as well as others, about this problem before but no one has any idea what's causing it
and no, there is no 3rd party programs running and yes this will happen on a clean cooked rom with no options checks off..i've tried everything...my only guess is that tmail.exe or the messaging system is causing it..but i cant be sure
does anyone have any ideas, i have to poke my phone 5-6 times a day when it freezes. is there any memory resident apps that can detect a frozen OS and force a soft reboot? and coders want to have ago at it?

What ROM/Radio/apps are you running? My Titan has never done that except when There were some reg entries I botched when I first got it.
No offense, but it is usually user error when things go awry, from adding bad oem's to the kitchen or messing with the registry entries.
A little more info is needed please.

Mine will freeze up if I leave the wifi switch on and then hit the power button to put it in standby. Or if I just let it time out and it goes into standby with the wifi switch on.
I upgraded to the VZW MR1 update and all is fixed!!

im running D.C.D 3.2.6 and radio 3.42.50
but this has been happening since before 3.2.X
no oems added, and like i said i would happen with a clean rom with no apps installed
i tried that to make sure it was a program i installed that was caussing it to freeze
i take it Windows Mobile doesnt have an event log or crash dump

Fr3nZy said:
im running D.C.D 3.2.6 and radio 3.42.50
but this has been happening since before 3.2.X
no oems added, and like i said i would happen with a clean rom with no apps installed
i tried that to make sure it was a program i installed that was caussing it to freeze
i take it Windows Mobile doesnt have an event log or crash dump
Click to expand...
Click to collapse
Try radio 3.42.40 Some ppl were having problems with 3.42.50, but I used it for a couple of months ok.

Well, honestly, this is far out of my range of advice. I have been running DCD ROM's since I got my phone, and re-flashing has cured my no wifi/no bluetooth/no whatever problems since I started. Delete the kitchen package, restart your computer, re-download, build ROM and flash again.
Its not the most convenient option, but it will tell you whether you have a hardware problem or not.
I have had many problems with the no2chem rom I am running now, but in comparison DCD's ROMs should be solid. I suggest you re-download the kitchen and build again. Start fresh, then report back.

1999TL said:
Try radio 3.42.40 Some ppl were having problems with 3.42.50, but I used it for a couple of months ok.
Click to expand...
Click to collapse
this happen with all radio's released since 3.40.02...i dont think it's the radio.
and i've tried recooking and reflashing with no success
wat it did try was this....i left the taskmanager running in process view and sorted by cpu usage..if i is a program i might catch it in action if the phone freezes with display on
and it did eventually...the program at the top wen it froze was tmail.exe @ 36% cpu useage...im not complete certain its the cause
and tmail.exe is a base OS file right? it's pocket outlook and i need it for TXTMSG

Do you have a lot of text messages saved? I have about 1500 saved... and if I keep more, freaky stuff happens... like bad restores with PIM and slow texting.

actually, i do about 4000
i'll archive them with PIMbackup and erase them
i'll report back

Fr3nZy said:
actually, i do about 4000
i'll archive them with PIMbackup and erase them
i'll report back
Click to expand...
Click to collapse
nope it didnt help...froze 4 times today

had exact same problem u did. did everything possible... nothing worked. turns out its a product defect that it crashes so brought it into telus store and they switched it for me.. since it was still under warranty if u have warranty i suggest u do the same... if not... im sorry mate this is not a software issue.
i had that defected phone for atleast a month.. and trust me when i say this.. i tried EVERYTHING. lol

actually its still under warrenty
i'll bear it and try and see if it is a software issue
i dont want to take it in for servicing if it's really not a hardware issue
the phone is pretty much new still
i might try flashing the official sprint rom and see if it fixes it

did you do a hardreset after each flash that you do. Cause if not you will have alot of footprint left over.

Only one app consistently locked my phone...
CorePlayer. I finally removed it after installing Kinoma Play (full edtion).

I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.

mine actually frooze when i have it in my pocket only. i found out that if the power on button is held down a long time, it might freeze light that. thats what i learned since i have it. it might strange weird but this is how it freeze with me.
DCD 3.2.6 and radio 3.42.50.

Cabanon said:
mine actually frooze when i have it in my pocket only. i found out that if the power on button is held down a long time, it might freeze light that. thats what i learned since i have it. it might strange weird but this is how it freeze with me.
DCD 3.2.6 and radio 3.42.50.
Click to expand...
Click to collapse
It may be because you are going into a weak 3G area whilst its in your pocket (which causes the problem when the phone auto-switches bands) the solution is to try what I suggest and if not entirely satisfied then perhaps try to update the radio.

nlel said:
It may be because you are going into a weak 3G area whilst its in your pocket (which causes the problem when the phone auto-switches bands) the solution is to try what I suggest and if not entirely satisfied then perhaps try to update the radio.
Click to expand...
Click to collapse
well, maybe., but i dont use the 3g band at all, im not even using a data plan because i dont surf the web at all other than at home via wifi. if it freeze, i just reboot. im not that too worried about that as it happen really few times.

Cabanon said:
well, maybe., but i dont use the 3g band at all, im not even using a data plan because i dont surf the web at all other than at home via wifi. if it freeze, i just reboot. im not that too worried about that as it happen really few times.
Click to expand...
Click to collapse
Do you not gt a 3G signal in your area or have you disabled it on the phone, you always have some type of signal going to the phone whether or not you actually run data connections.
If you are not using 3G then your must be getting an Edge or GPRS connection that you can make phone calls with. Its still worth setting the band type to GSM + AUTO even if you don't get a 3G signal in your area.

hang up etc
I installed everything in main memory and nothing but storage on card and doped to 49% on cpu, until phone is used and the around 55% , I dont know if that might help you but it did for me.

Ok i'm having an ANNOYING issue here...

Up until yesterday ive always drawn 3-4 bars at the least inside of my house. All of a sudden out of nowhere I cant get any bars. Its like theyll pop on and then just disappear really quick. Its made my data painfully slow and I cant figure out what the issue is. I've reflashed the radio and that didnt help. Made sure the network was set to CDMA... that didnt help. Im a little clueless here. And periodically itll pull up two or three bars and then almost instantly the service will die out altogether and an X will pop up where the bars normally are....then the process starts all over. WTF? Is this a network issue or is it my phone? I hadnt made any changes before I started experiencing the problems.
Odd thing is im at work right now and im getting stable bars just fine.

So 66 views and no comments... i guess im the only one to ever have this issue then.

Sprint has been having network issues for a few weeks now in different markets and I'm sure you're being affected by it. Just give it a little bit and if it is still there in a week or two contact customer service. Hell, maybe even try now to see if they're actually having issues in your area so at least you'll know.

I love how people come here and post that they are having signal issues and data issues and they haven't called Sprint to see if there is an outage or issues in their area. The first thing I would do it restart my phone and call Sprint. Not flash a radio, try a different ROM...blah blah blah.

Or... maybe it didnt occur to you that calling to see if there were network issues was the first thing I did. You think id actually go through the trouble of doing all that over again without calling first? I guess I should've said that but c'mon lol...

tgruendler has a valid point. we can't assume anything. we get enough "noobs" here that unless you tell us what you've done, we assume you jumped straight to XDA without doing your due diligence. Perhaps those 66 views all thought the same, "this guy hasn't even contacted sprint. pass!" now that we've ruled sprints network out, now we can do something constructive.
what radio version are you running?

I mean I hear you and all but look at my join date lol... im far from a noob I just dont post much. The really odd thing is I switched back to an older radio and the problem went away. I flashed the newer radio and it came back so im seriously wondering just wtf...
Im using the 1.34 radio and the problem is gone. Im just curious as to why the newer radio frizzed out on me all of a sudden since i've been using that one for like a month. I dunno but it seems like the issue is fixed for now.

i noticed this same exact issue when I installed fresh ROM. I know I installed the new radio back then as well. see my post:
http://forum.xda-developers.com/showpost.php?p=8886052&postcount=5919

Issues with my HD2 (Optus Australia - Italian Fone)

Been having some problems with my HD2 as of late. If this is the wrong forum to post, please point me elsewhere.
Purchased original one via Mobicity - turned out it was a HK version. I dropped it and smashed the screen, so got a replacement one (purchased thru Mobicity again) under my insurance.
Not sure the origins of the second fone though. When it arrived, it was in Italian. Had to send it back to M/City to reflash it with (what I believe to be ) a WWE version.
Details on startup screen:
R 2.00.51.07
G 15.30.50.07U
D 1.66.76641
Have left the phone as-is after it was reflashed with an English ROM and returned to me. Has worked perfectly for about 8 months. Recent issues only occurring last 2 months or so.
Issues having lately:
* Randomly reboots itself - completely randomly. Sometimes, while not even touching the phone, sometimes while typing a text or browsing the net.
* Battery usage lately has been horrendous. Hard to pin an exact figure on it, but it's MUCH MUCH worse than usual, over the last 2 months.
* CONSTANTLY dropping signal & Data connection. I can watch the data/signal symbols switch from nothing, to G, to 3G, to H, and back again within the space of seconds. On occasions, when the data-conn drops out (but fone signal remains), I go into connection settings and find the Data Settings slider is switched off! I must manually go and turn it on again... which sometimes works, and sometimes fails to stay on.
I HAVE manually gone into the settings and told it to update to the latest data settings from my provider (Optus) and it always responds that I already have the latest settings.
Often, the only way to get data connection back is to manually reboot the whole fone.
Sometimes, while browsing a simple website on the fone, it will drop connection. I live in Brisbane. Optus advises Brisbane has absolute FULL coverage, until you start going outskirts. I can be in the city centre gardens (no big buildings to block signals) and still not achieve full "H" or even "3G" speeds... most times only achieving simple "G" speeds.
This is obviously not right I HAVE contacted Optus about this, and they suggest it is an issue with the phone, as they insist they have full coverage brisbane-wide.
I have also noticed, in the last 2-weeks or so, that Cookies Home Tab is not working correctly all the time.
On occasions - but not ALL the time - on my home-page CHT displays appointments that are already passed days or even weeks ago.
Sometimes, when adding a new appointment (either manually in the fone, or via the MyPhone website and synching), it will not display at all in CHT.
I know there is a new version of CHT, but some of the technical info on the website sounds like there can be issues with not correctly un- or re- installing it.
I've still got a couple of months left for my manufacturer warranty.... I'm not keen on reflashing with un-official ROMS until after that period has elapsed... then i'm keen to go for it. If that is my only option, then I will consider, but would prefer a "genuine" fix first.
Can anyone please offer some suggestions, hints, experiences ? I haven't been on the forums for months, and now the HD2 thread is some 10-episodes of 30+ pages, so I have no hope in hell of reading thru all that hoping to find an answer.
Suggestions please for possible reasons, or fixes, or a different WWE English ROM to flash to ?
Note also: My serial number does not appear to be Asian in origin. I have tried to d/l the Asia Pacific, the Worldwide, and the HK latest ROMS... but it fails upon serial number. I have not tried, but I assume my fone is Italian model, hence any ROM that I flash must be d/loadable from another source, not the HTC website.
Please also note: I'm not - at this point - interested in running Android, so (without wanting to sound ungrateful) if any help could avoid suggestions of that nature please.
Thanx in advance for any assistance.

spinifex74 said:
Been having some problems with my HD2 as of late. If this is the wrong forum to post, please point me elsewhere.
Purchased original one via Mobicity - turned out it was a HK version. I dropped it and smashed the screen, so got a replacement one (purchased thru Mobicity again) under my insurance.
Not sure the origins of the second fone though. When it arrived, it was in Italian. Had to send it back to M/City to reflash it with (what I believe to be ) a WWE version.
Details on startup screen:
R 2.00.51.07
G 15.30.50.07U
D 1.66.76641
Have left the phone as-is after it was reflashed with an English ROM and returned to me. Has worked perfectly for about 8 months. Recent issues only occurring last 2 months or so.
Issues having lately:
* Randomly reboots itself - completely randomly. Sometimes, while not even touching the phone, sometimes while typing a text or browsing the net.
* Battery usage lately has been horrendous. Hard to pin an exact figure on it, but it's MUCH MUCH worse than usual, over the last 2 months.
* CONSTANTLY dropping signal & Data connection. I can watch the data/signal symbols switch from nothing, to G, to 3G, to H, and back again within the space of seconds. On occasions, when the data-conn drops out (but fone signal remains), I go into connection settings and find the Data Settings slider is switched off! I must manually go and turn it on again... which sometimes works, and sometimes fails to stay on.
I HAVE manually gone into the settings and told it to update to the latest data settings from my provider (Optus) and it always responds that I already have the latest settings.
Often, the only way to get data connection back is to manually reboot the whole fone.
Sometimes, while browsing a simple website on the fone, it will drop connection. I live in Brisbane. Optus advises Brisbane has absolute FULL coverage, until you start going outskirts. I can be in the city centre gardens (no big buildings to block signals) and still not achieve full "H" or even "3G" speeds... most times only achieving simple "G" speeds.
This is obviously not right I HAVE contacted Optus about this, and they suggest it is an issue with the phone, as they insist they have full coverage brisbane-wide.
I have also noticed, in the last 2-weeks or so, that Cookies Home Tab is not working correctly all the time.
On occasions - but not ALL the time - on my home-page CHT displays appointments that are already passed days or even weeks ago.
Sometimes, when adding a new appointment (either manually in the fone, or via the MyPhone website and synching), it will not display at all in CHT.
I know there is a new version of CHT, but some of the technical info on the website sounds like there can be issues with not correctly un- or re- installing it.
I've still got a couple of months left for my manufacturer warranty.... I'm not keen on reflashing with un-official ROMS until after that period has elapsed... then i'm keen to go for it. If that is my only option, then I will consider, but would prefer a "genuine" fix first.
Can anyone please offer some suggestions, hints, experiences ? I haven't been on the forums for months, and now the HD2 thread is some 10-episodes of 30+ pages, so I have no hope in hell of reading thru all that hoping to find an answer.
Suggestions please for possible reasons, or fixes, or a different WWE English ROM to flash to ?
Note also: My serial number does not appear to be Asian in origin. I have tried to d/l the Asia Pacific, the Worldwide, and the HK latest ROMS... but it fails upon serial number. I have not tried, but I assume my fone is Italian model, hence any ROM that I flash must be d/loadable from another source, not the HTC website.
Please also note: I'm not - at this point - interested in running Android, so (without wanting to sound ungrateful) if any help could avoid suggestions of that nature please.
Thanx in advance for any assistance.
Click to expand...
Click to collapse
Hi, I to have an HD2 in Oz from Mobicity - though never got an Italian version. To be honest, the only time I had an issues like those you are talking about was when I flashed new roms WITHOUT 'Task 29' first. Look it up. It kind of "cleans up" your phone inbetween cooked roms. But as you have only had Official roms on your phone, this might not be the issue.
To be honest, I don't think you Task 29 anyway until you put HSPL on your phone (this allows you to put cooked Roms on), but as soon as you do this, you void your warranty. Now you can take HSPL off before you send it back, but if your phone was to die BEFORE you took it off and then you sent it back, you'd be ****ed if they managed to power it up.
As you're under warranty, I'd send it back to be fixed and explain the fact that they had another rom on when you first got it.
Ra-ey
ps. You may want to quickly check online to make sure you are running the most uptodate Rom for your phone on the HTC website.

Hi,
Did u try hard-reseting your phone by pressing the volume up and down and the power button at the same time. Usually fixes many issues relating to yours. It might have been caused by a programs problem which corrupted main system files.
Luckych

Thanx guys for responses.
luckych said:
Hi, Did u try hard-reseting your phone......
Click to expand...
Click to collapse
Not yet, no..... will go through that process tonight. Was just worried that hard-setting it MAY end up back with the Italian settings (on the off-chance it still has an Italian ROM, but has just been set to display in English) ???
Can anyone identify the ROM details in my original post, as being WWE (I assume this means World Wide English?)
I cannot find anywhere that lists if those numbers mean WWE or English ?

Further to this... i just found this thread here: http://forum.xda-developers.com/showthread.php?t=791436
This is almost exactly what my phone is doing too, so I suspect it may be the same cause.
One thing I forgot to mention in my original post here, is that sometimes, after the fone reboots itself, it fails to boot up again and all the handset buttons fail to respond. The little red reset button does not work either.
Doesn't happen EVERY time, but occasionally, the only way to resurrect the phone is to remove the battery for 30 mins or so, then reinstall and try again.
Obviously a very real issue - and it seems a known one - perhaps time to return for warranty fix or replacement.
Thanx all for responses in this thread - I will monitor the other thread now for further news.

when you hard-reset it reverts it back to the last rom you had, if it was WWE then it would reload that.
Remember when someone load's another rom on your phone it complete (kinda) erases the old rom and replaces it so there would be nothing that would revert it to the italy ROM.
R 2.00.51.07 (Radio Version)
G 15.30.50.07U (Protocol version)
D 1.66.76641 (ROM Version) could be anything
Usually the Italy ROM only has one language in the rom so my guess would be it has the WWE, by looking at the numbers above no-one would be able to tell you what you what rom it is.
Hope this helps

luckych said:
when you hard-reset it reverts it back to the last rom you had, if it was WWE then it would reload that.
Remember when someone load's another rom on your phone it complete (kinda) erases the old rom and replaces it so there would be nothing that would revert it to the italy ROM.
R 2.00.51.07 (Radio Version)
G 15.30.50.07U (Protocol version)
D 1.66.76641 (ROM Version) could be anything
Usually the Italy ROM only has one language in the rom so my guess would be it has the WWE, by looking at the numbers above no-one would be able to tell you what you what rom it is.
Hope this helps
Click to expand...
Click to collapse
Thankyou mate.... that makes it a lot clearer
Will try the hard-reset method tonite and-reinstall only the apps (if it ok to use that term, for WM programs !!!) that I need.
Have also been given a link to the latest WWE ROM to flash, from Mobicity, so will hard-reset, to clear any crap, then re-flash with the new ROM.
Just curious... I know I should remove the memory card when resetting/reflashing (i'm not doing dual-boot with Android), but should I also remove the SIM card too? Eg: Get the background system installed and running, then power-off, insert SIM, power-on to get the network specifics up and running ???

My Guess
I have a Telstra HD2, running the latest Telstra ROM and CHT 1.8.5. The phone reboots regularly of its own accord. Seems to be related to overheating as the base of the phone is quite hot when it reboots. If the phone get really hot, it will not re-start (stays at white screen). Have had to put the phone in the fridge to get it to work.
I don't know if this is related but I have a cradle that I use to connect my HD2 to my work PC. If the HD2 is running SenseUI, after the HD2 was been in the cradle for a while, the HD2 re-starts. This does not happen if I disable SenseUI. It seems that the restart only occurs after the battery reaches 100%.
The restarting occurs with CHT 2.0 beta as well.
When I get a chance, I'll do a hard reset and see if that fixes the problem.
Cheers

Hmmmm....... seems to be a recurring issue with some of the "newer" phones. My original phone - before I dropped it and smashed the screen - never had any of the issues I'm currently experiencing
I've read somewhere on here that the rebooting issue is suspected to be from early-production snapdragon processors..... which SHOULD be an immediate warranty claim, in my opinion.
I will try the hard-reset, and then a fresh Official ROM install, to see if it solves it.

Help needed identifying a problem with my network

Hello,
Im having a most frustrating problem. Im not sure if its a modem issue or a hardware issue. What I am experiencing is this:
The phone shows no bars, but sees a carrier. This happened after flashing back to a stock GB rom after using a CM9 rom. I can receive texts and calls sometimes, but its not consistant. If it shows no bars I can get a call, if it shows one or two bars i cant, but get the missed call notification. I have done factory resets, cache clears. Its really making my phone unusable. I went back to using my 3 yr old Ericsson till I can get this figured out. Im hoping that someone has some advice for me as Im out of ideas. Ive tried to flash just the modem but no luck. Went from CyanTablet to xxjvt 2.3.5, rooted it so I could get the modded recovery. The pins for the where the sim card make contact are damaged but it has worked for the last 2 months that way. I really love this phone and dont want to replace it yet.

rivman05 said:
I really love this phone and dont want to replace it yet.
Click to expand...
Click to collapse
test with a network booster to increase signal strength, free from google but if you bring phone to another location, do you get a better signal? meaning location matters, if you far from your network cell site, its more difficult

Ill try the network booster. All of my old phones pick up 5 bars, I live about 1/4 mile from the cell tower. I have tried another flash with 2.3.3, repartitioned this time. Once its back up and running Ill get back to you. Is there anything else Im missing? Well I think its dead. Ive tried all my coworkers sims in it, nothing came up. It says no service permanently now, guess its a 4" tablet.

Try another radio, i had the same problem wit JW4 radio,flashed JVT and problem solved.
Some radios are better than others in different locations, it also depends on rom used.

I tried a completely new build, flashed a new modem, then flashed xxjvu. Still nothing, going to call Samsung and see if I can get the warranty to fix it. 2.3.6 tho has 364 megs of ram and has almost 200 free, thats cool. zsjw4 has a new look to it.