Not that I wasn't confused enough....

Not that I wasn't confused enough.... - HD2 General

Ok, so I turned off the data connections (well, deleted the connections really). I have my HD2 hooked up to active sync at the moment, and I was wanting to check something online with my phone. Well, right as I clicked go, I thought about just deleting the connections (jackass, you can't connect anymore). It went through anyway.
Did I not delete all of my connections for data (I checked, cannot see them anymore), or do I get internet access through my cable?
Edit:
I have the left/right pointing arrows at the top.
The only connection I have left is for MMS server....could I be connecting through this?

it will use your pc connection when active synced.that's why WiFi gets grayed out.

Well that is freakin sweet. I don't think I have had a phone that would do that before.

pjkj13 said:
Well that is freakin sweet. I don't think I have had a phone that would do that before.
Click to expand...
Click to collapse
Yes, nearlly all previous versions of PPC can do it. Before PPCs became phones and have internet access of their own.
However it seems that if your PC is using a proxy, WM will get confused.

Related

Browsing LAN from PPC

Is it possible to browse my LAN from my XDAII using only my USB cradle? I'm using Resco Explorer. I tried this:
1. Select My Network root directory
2. Selected Map Drive... from the Advanced Toolbar
... to no avail.

Open up internet explorer. Put in the address bar the following \\"computer name or IP of computer" then click on the little go button and waa laa it will work. The go button doesn't say go, but in essence it is the same it is to the right of the address bar.
Mike

As far as I was aware it's not possible to browse network files from an XDA2 unless you use an SDIO wi-fi card, and sure enough I can't get Mikee's suggestion to work. If I type into IE's address bar '\\192.168.1.100' and click Go, that gets replaced with 'file//\\192.168.1.100\' (almost like it's trying to connect for me) but then immediately I get a 'Network path cannot be found' error.
Pity, cos it'd be great to be able to do this. Perhaps I'm doing something wrong, Mikee?

You can partially blame Microsoft for this with their "My network card connects to {work} or {the internet}..." paradigm.
It's one of the most irritating things about the Windows Mobile OS.
Let's suppose you have a Wireless Card or (in my XDAIIi's case) internal Wireless turned on. By default, WinMob2003(&SE) decides arbitarily that your network card connects to the Internet.
This is fine if you are using a Wireless AP hooked up to ADSL at home for your Home LAN as it will just connect via your AP and go straight through to the Internet. However, guess what you have to do to be able to connect to any local machines on your LAN? You guessed it, you have to go into the advanced connection setting and change the "My network card connects to..." to "Work"!! You will then be able to map a drive either using Resco Explorer or even the inbuilt explorer, of any machine that your PPC can "see". Don't forget that permissions etc will need to be setup first though so that you can login to said machine.
That's fine, however, guess what you WON'T be able to do while you have that setting at "Work"? You guessed it, you WON'T be able to connect to the Internet!
I'm afraid it's either one OR the other and NOT both together.
I went through all this wireless bit because it equally applies to when you are simply connected via the cradle using Activesync. In the "Pass-through" settings of AS, you'll find it set to "The Internet" by default and like this, you will not be able to access local machines on the LAN connected via your desktop or a switch/hub. If you change it to "Work", however, you will. Then of course, the same applies as to the wireless setup. With it at "Work" you won't have access to "The Internet" and vice-versa.
I can only guess that the PPC situation is like this because the WinMob2003(&SE) OS does NOT have a FULL network client built into it that behaves as a Windows Desktop PC would. So, basically, it's a cludge.

strange , im using the XDA2s and my wifi settings are set to see internet , but in file explore or rosco file explorer they both see my lan fine in file exlore all i doo is click on the netfolder ickon at the bottom and then enter \\ (then the computer name) eg \\bedroompc this works both for my work network and home
henny

Firstly, my apologies for the double post above. I only pushed the submit button once, honest!
I was actually describing the "standard" way that all of O2's XDA's get setup when they are first turned on from new and that means that usually, under "Connections", "Select Networks" then "Network Management", you will normally see "My ISP" in the top box for progs that automatically connect to the Internet and "My Work Network" in the lower box for progs that automatically connect to a private network and this is where the problem lays.
In hindsight, I wasn't particularly helpful to Tetragrammaton since I didn't provide the actual solution he was looking for simply because I got too wrapped up in bashing the PPC's network client (or lack of a full one anyway...)
The solution is of course to simply make the bottom box equal to the top box (i.e. "My ISP") and immediately this will change the behaviour to that as you so correctly described (being able to connect to the Internet and to a Local LAN machine simultaneously) and will obviate the need to swap the destination of the Network Card settings themselves (which only gives one way connectivity with Wireless anyway).
I'm guessing that your machine is set this way Henny? Which of course will work as you describe.
The only caveat to doing this is that you disable the O2 WAP settings (which are normally configured under the "My Work Network" part) but whether this is a great loss is a moot point. In any case, the lower box in "Network Management" can always be switched back temporarily should you need the WAP settings back.
I hope this has now helped Tetragrammaton to get up and running...

I should hastely add that my offered solution in the last post still won't allow you to browse LAN machines while connected in the cradle (I've just tried it) so if anyone knows a way to do this, I would be interested...

CPNowell said:
I should hastely add that my offered solution in the last post still won't allow you to browse LAN machines while connected in the cradle (I've just tried it) so if anyone knows a way to do this, I would be interested...
Click to expand...
Click to collapse
I would be too.. anyways, thanks a lot y'all for the info.

CPNowell said:
I should hastely add that my offered solution in the last post still won't allow you to browse LAN machines while connected in the cradle (I've just tried it) so if anyone knows a way to do this, I would be interested...
Click to expand...
Click to collapse
I haven't been able to try your suggestion yet, but just so we're clear, you're talking about browsing the files on LAN machines while the XDA2 (not 2i or 2s) is connected via ActiveSync? I think that's what tetragrammaton was asking in the original post. I have a suspicion that this post has been taken over with discussions about browsing the LAN using a wi-fi connection, not ActiveSync... :roll: Of course the XDA2 (which tetragrammaton mentions) doesn't have wi-fi

SiliconS said:
I haven't been able to try your suggestion yet, but just so we're clear, you're talking about browsing the files on LAN machines while the XDA2 (not 2i or 2s) is connected via ActiveSync? I think that's what tetragrammaton was asking in the original post. I have a suspicion that this post has been taken over with discussions about browsing the LAN using a wi-fi connection, not ActiveSync... :roll: Of course the XDA2 (which tetragrammaton mentions) doesn't have wi-fi
Click to expand...
Click to collapse
True and you are absolutely right on all counts. Browsing LAN machines via activesync using an XDAII in a USB cradle.

CPNowell said:
SiliconS said:
CPNowell said:
I should hastely add that my offered solution in the last post still won't allow you to browse LAN machines while connected in the cradle (I've just tried it) so if anyone knows a way to do this, I would be interested...
Click to expand...
Click to collapse
I haven't been able to try your suggestion yet, but just so we're clear, you're talking about browsing the files on LAN machines while the XDA2 (not 2i or 2s) is connected via ActiveSync? I think that's what tetragrammaton was asking in the original post. I have a suspicion that this post has been taken over with discussions about browsing the LAN using a wi-fi connection, not ActiveSync... :roll: Of course the XDA2 (which tetragrammaton mentions) doesn't have wi-fi
Click to expand...
Click to collapse
True and you are absolutely right on all counts. Browsing LAN machines via activesync using an XDAII in a USB cradle.
Click to expand...
Click to collapse
In that case I'm confused . Sorry. If it doesn't work in the cradle, but you're not talking about doing it through a wi-fi connection, what does your solution actually do? Apologies if I'm being a bit thick here - I'm ill with the 'flu.
I'm nervous about starting to mess about with the connections settings on my XDA2 just so that I can browse files on the network - every time I do this I end up screwing them up. I don't understand them at all and usually a hard reset with the auto-config is the only way to get it all working again. :roll:

I'll do a synopsis of this thread so far this evening. Bit tied up at work at the moment. Hope that's ok...

This has been covered many many times. It is impossible as currently set up. The best way to achieve this is to buy Pocket LAN, it works perfectly

I've had a quick look at that but that would be for just Wireless LAN connectivity, right? ...and as has already been pointed out to me (correctly), the original question was not about wireless.

NO!!!! This works through active sync with the xda in the cradle, worked on xda2 and 2i for me. Actually it is a bit of a waste of money as i never use it, though it seemed agreat idea at the time.

barney12345 said:
NO!!!! This works through active sync with the xda in the cradle, worked on xda2 and 2i for me. Actually it is a bit of a waste of money as i never use it, though it seemed agreat idea at the time.
Click to expand...
Click to collapse
I've googled "Pocket LAN" and came up with a bunch of hits though none of them seem to be the right hit. If Pocket LAN seems to do the trick of accessing a network via the USB cradle only, could you post the link to Pocket LAN? Thanks!

http://www.pocketlance.com/register/index.shtml it says for ce or 2002 but works on 2003 and 2003se.
Hope this helps

You can find it (PocketLAN) here...
http://www.pocketgear.com/software_detail.asp?id=2825
Contrary to what Barney found, it didn't work at all for my XDAIIi in the cradle. The usual "network path not found" was all it could muster...
Even wirelessly I found it cumbersome and a bit iffy at connecting to machines at times. It does no more than Resco Explorers built-in network stuff. It also seeks to start messing with the device name etc and generally "muscle-in" and take over... Resco Exp does it without fuss, quietly and efficiently. More importantly, it works everytime but I'm afraid even it can't manage to connect to LAN machines through the cradle and AS.
Sorry about no (promised) post last night. Just didn't get the time. I'll try again for later today.

http://www.pocketlance.com/ try this link as well you can get a trial download

It's going out the window!

OK people, I know this site is supposed to be really great, but I have some simple problems, and I can't find the answers by browsing and searching this site. Hell, I can't even identify which phone I'm using....
I bought an XDA Mini S, so what's that called? A kangaroo or something I guess. anyway - I'm about to see if it'll survive being launched high into the air, that's for sure.
I have a home network, a windows small business server running exchange 2003, an ADSL router/firewall and some PC's.
ALL (!?) I want this damn thing to do is surf the network, and the internet whilst at home using a wireless connection. Then whilst it's out and about - to VPN back to home so I can do the same.
However, the set up of this thing is a right nightmare to understand, "My ISP", "My network", "Work", I can't seem to make logical sense of how this thing operates in a networking environment, and I do understand networks pretty well, so this is VERY vexing, hence why this is flying out the window soon.
Anybody feel they can spare some explanations as to how this thing is structured? If I click on anymore settings I might just go mad gibber dribble.

Paulsco - welcome to the board!
Not to sound like a father, but seriously, go and have a game of Call of Duty or something. That's what I do when I'm stressed. It's not worth throwing the thing out of the window. And if you are in a mood to get rid of it, throw it in my direction. I need a Mini S for development!
Ok, what have you done so far?
Have you got it browsing the net through ActiveSync yet?
Ensure that you can sync, then go to ActiveSync, File Menu, Options, and choose "This computer is connected to " The internet.
Then, ensure that your PDA is set to reflect this as well, the internet.
Then hopefully the two should permit you to browse the net through your ActiveSync connection. Try Internet Explorer on the PDA.
If and when you're doing that, then you can progress to wifi and VPN etc.
For wifi, I've always found this useful:
http://wifi.aximsite.com/wifi_net.html
V

Paulsco said:
I bought an XDA Mini S, so what's that called?
Click to expand...
Click to collapse
That's easy - it's the HTC Wizard.
HTC is the comapny that actually makes it and Wizard is HTC's name for it.

Thanks for the response!
That's for the advice - I think I have worn out all the games...
OK - so here is the sit. Make some tea and take a deep breath!
I've got my "wizard" to to most things, it'll sync with Exchange over wifi OR it will sync with a PC via bluetooth, but it won't do both. that's not a real issue though.
Also I can surf the internet via wifi, and I can do this via GPRS, but here is what I need to sort out:
I have two connections listed under settings>connections>connections
The first is the O2 GRPS My ISP connection, and the second is the "My work network" connection. I have defined a VPN to connect back to my firewall in this last connection, but I had to delete the O2 Active default connection in this connection because it kept dialing grps instead of using wifi.
In connections>advanced>network management I have both boxes set to "My work network". this prevents any GPRS calls, until I change the setting. Great, I'd rather not have to have done this, but it does seem to work...
Only thing is, when I am out I tried to connect back to the exchange box and I got from activesync "Your exchange account does not allow syncing, blah blah" which it obviously does because it works from the local network. I have opened all the activesync ports on the firewall.
I hoped to be able to connect the VPN, but this seemed to be impossible with my current config.
I need to be able to configure this so that I can browse my wifi network both locally and remotely. I have managed to get the VPN to connect, but I have no idea why this works sometimes and not others - when you click on connect, you get a beep...and nothing else, no error messages or anything.
So I want to get exchange mail whilst wifi'd: OK that worked this AM because I told everything to use "My work network" that has no GPRS connection defined, but when I wnet out I hthen changed the setting so that it dialed the O2 GPRS connection for Internet, then I got internet, but no VPN connection. then when I returned to the office, I had to soft boot because no matter what I dod, activesync gave me "cannot connect with current settings" - A soft boot cured that, but it's not a real great solution every time you return to the office.
Any help you can give me would be gratefully received! I'll happily bung cash to people for a solution!!!
thanks and regards,
Paul

(8525) Wifi and GPRS/UMTS Connection...

I don't know what is going on but when I'm at home, I woud usually be connected to UMTS/GPRS. Of course, having wifi at home, I would rather use that (speedwise) but when I turn on wifi, I notice that I would be connected to both WIFI and UMTS/GPRS.
FIRST QUESTION:
Which am I utilizing? UMTS/GPRS or WIFI?
Now, considering that I "THINK" I'm using wifi, I would launch PIE and to go to a website, it takes forever...... The task bar keeps saying locating. I have to literally wait and wait before I get to the website.
SECOND QUESTION:
What is going on here?
At any rate, if I turn WIFI off and I'm just connected to GPRS/UMTS, I can browse using PIE without any problems. No "locating..." etc. or waiting.
Please help!

nutnbolt said:
I don't know what is going on but when I'm at home, I woud usually be connected to UMTS/GPRS. Of course, having wifi at home, I would rather use that (speedwise) but when I turn on wifi, I notice that I would be connected to both WIFI and UMTS/GPRS.
FIRST QUESTION:
Which am I utilizing? UMTS/GPRS or WIFI?
Now, considering that I "THINK" I'm using wifi, I would launch PIE and to go to a website, it takes forever...... The task bar keeps saying locating. I have to literally wait and wait before I get to the website.
SECOND QUESTION:
What is going on here?
At any rate, if I turn WIFI off and I'm just connected to GPRS/UMTS, I can browse using PIE without any problems. No "locating..." etc. or waiting.
Please help!
Click to expand...
Click to collapse
While on wifi you can temporarily turn off GPRS using connections hard key below on/off hard key. Just tap on the icon that looks like a pda with two arrows. When off wifi reconnect GPRS using connections in settings menu.
Mike.

Ok. goodie. I was able to shut off the GPRS.
Now I launched internet explorer. The only connection that I'm connected to is my wifi. Still the taskbar is saying "Locating.." taking forever to go anywhere.

nutnbolt said:
Ok. goodie. I was able to shut off the GPRS.
Now I launched internet explorer. The only connection that I'm connected to is my wifi. Still the taskbar is saying "Locating.." taking forever to go anywhere.
Click to expand...
Click to collapse
At least one step in right direction. I'm not so hot on the slow connection. Assume ports and proxies are setup ok.
Perhaps others have some ideas.
Mike

elaborate on the proxy settings so i can check if these are right...

nutnbolt said:
elaborate on the proxy settings so i can check if these are right...
Click to expand...
Click to collapse
In Start>Settings>connections there is an option "edit my proxy server" and within this lots of options.
I will have a different provider from you so don't know what settings should be there. I am also not an expert on this so hopefully someone who is will jump in with some info on this.
One person I was posting with queried why their wifi connection needed any proxy settings as they were not connecting through to their mobile operator but to their home broadband connection. However when they tweaked a setting here their Wifi suddenly started working. See Mariete's last post here:
http://forum.xda-developers.com/showthread.php?t=284867
We need someone with more knowledge!! Anyone?
Mike

Well for one thing, there is no setting for proxy server. Even then when i did find anything to do with proxy server, it is not even activated.
Next..

Phew...Someone else with the same EXACT issue. I was on with Cingular/HTC support today and they really didn't help. I will keep trying new things and checking back to this thread to see if anyone else thinks of an idea.
I have a Apple Airport (802.11g) with no security settings. I have a few laptops on the network and friends who can connect their laptops without any issues.

I actually got tired of this issue. I downloaded and bought netfront. It was something I was going to buy anyway. So after installing it, I tried it again and this time, it goes to the website flawlessly. It must be something to do with IE.
On the other hand, I'm having some issues with shutting down the GPRS again. It keeps turning on automatically.

brmcguire said:
Phew...Someone else with the same EXACT issue. I was on with Cingular/HTC support today and they really didn't help. I will keep trying new things and checking back to this thread to see if anyone else thinks of an idea.
I have a Apple Airport (802.11g) with no security settings. I have a few laptops on the network and friends who can connect their laptops without any issues.
Click to expand...
Click to collapse
everyone make sure they arent on their providers connection that utilizes the proxy.. i dont know about any provider except cingular.. when using wifi stay off MEDIA NET.. everyone's best bet is to make sure they are on the connection for MY ISP, go to settings, connections, connections, advanced, select networks, change the drop down to MY ISP. also make sure wifi is off before doing this, after changing to my isp then turn wifi back on and you should be ok...

shogunmark said:
everyone make sure they arent on their providers connection that utilizes the proxy.. i dont know about any provider except cingular.. when using wifi stay off MEDIA NET.. everyone's best bet is to make sure they are on the connection for MY ISP, go to settings, connections, connections, advanced, select networks, change the drop down to MY ISP. also make sure wifi is off before doing this, after changing to my isp then turn wifi back on and you should be ok...
Click to expand...
Click to collapse
I will give this a try. Thanks. I will keep everyone posted to my hopeful success.

Absolutely fantastic!!!
Hi All,
First of all, let me tell you that I was also suffering from the same problem of MediaNet proxy settings. I've done the same changes asked by "shogunmark" which really sounds good logicaly. And my wifi connection started working miraculously! Yes, it is miracle for me as I am trying to connect to WiFi for last 3 days! Thanks a lot again...

I got it to work as well. However, I couldn't use "My ISP" connection as it was pointing to a Cingular domain. I ended up creating a new one called Home and it works fine. I do have a question. Under Settings/Connections/Connections/Advanced/Select Networks...
What does everyone have selected in both drop downs? I had to select my new Home connection for both to get WIFI to work.

that cingular domain/AP is only used for edge/3G data with no proxy.. this is why this is used for wifi.. theoretically MEdia net would work if it didnt have the proxy... but the phone doesnt look at the AP name when on wifi, only the proxy, you shouldnt have needed to create a new connection!

shogunmark said:
that cingular domain/AP is only used for edge/3G data with no proxy.. this is why this is used for wifi.. theoretically MEdia net would work if it didnt have the proxy... but the phone doesnt look at the AP name when on wifi, only the proxy, you shouldnt have needed to create a new connection!
Click to expand...
Click to collapse
ok, so I should be able to keep Media Net on the top drop down and My ISP on the second drop down? I assume I should just be able to use the Comm Manager to switch between WIFI and the Cingular Data Connections?

Touch Hd 3G vodaphone uk lose of connection

Hi guys,
Been looking around all day for a fix for this. I thought it was just a setting issue so have been try all kinds of setups from what vodaphone have on their website to what i have googled and still have the issue.
I can get on to the internet after a reboot but after a while it will lose connection and i will get two arrows one left and one right on top of each other instead of the normal "G" icon. As so as this happens i lose all connection to the internet and cannot get back on unless i reboot the phone a few times then the "G" icon comes back and the internet is back up and running.
Its my only grip so far with this phone everything else is great.
Any ideas
Damo

wierd. that sounds like the activesync icon...You're not connected to your PC via cable/bluetooth are you?
Stupid question I know, but best to get it out of the way.

rhedgehog said:
wierd. that sounds like the activesync icon...You're not connected to your PC via cable/bluetooth are you?
Stupid question I know, but best to get it out of the way.
Click to expand...
Click to collapse
oh my god i am such a noob, i did not know that when the usb connection is connected the interenetconnection stopped......hang is that right, should it still not connect to the internet?
Thanks
Damian

When you plug it into the PC, it will try and use the PC's internet connection.
On the PC, open activesync and go to file, connection settings.
Make sure that the option called This computer connects to is set to the internet.
Also, tick the box marked Allow wireless connections... then it should be able to connect while plugged in.
If you have vista and WMDC, these options should still be around, but as i have avoided vista like the plague, i can't tell you where they are cos i simply don't know.

Why my WiFi is grayed out?

Noticed that, obviously my phone is not in airplane mode, please advise.

mine does this when im plugged in to the pc via usb

Ryan Cordero said:
mine does this when im plugged in to the pc via usb
Click to expand...
Click to collapse
Yes...when plugged in via usb it utilizes the internet that is available in the pc and overrides the wi-fi. Unplug the usb cable and the wi-fi should come back on without any interaction on your part.

n11 said:
Yes...when plugged in via usb it utilizes the internet that is available in the pc and overrides the wi-fi. Unplug the usb cable and the wi-fi should come back on without any interaction on your part.
Click to expand...
Click to collapse
Does it do it no matter if I choose active-sync/file sharing/internet sharing? I guess the third option does not make much sense...

alexsemi said:
Does it do it no matter if I choose active-sync/file sharing/internet sharing? I guess the third option does not make much sense...
Click to expand...
Click to collapse
I'm a little outside of my comfort range here...but...I believe the third option, internet sharing allows the PC to use the HD2 as the internet source. This is referred to as tethering. I'll look forward to someone correcting me if I'm wrong.

n11 said:
I'm a little outside of my comfort range here...but...I believe the third option, internet sharing allows the PC to use the HD2 as the internet source. This is referred to as tethering. I'll look forward to someone correcting me if I'm wrong.
Click to expand...
Click to collapse
Bingo, you are correct
It passes your data connection over to your PC via USB, just like the phone was a modem.

but what if you want to use the phone as the internet source from your laptop? I have wifi in my house and use hotspots when available but what if I have neither available. can I use the phone to connect my laptop to the internet?
if so HOW?
thanks

pblocal said:
but what if you want to use the phone as the internet source from your laptop? I have wifi in my house and use hotspots when available but what if I have neither available. can I use the phone to connect my laptop to the internet?
if so HOW?
thanks
Click to expand...
Click to collapse
If your LT does not have a wifi card get one, a using a $30 wifi card is preferable to using a $500 phone as a wifi dongle ...[/QUOTE]
But, yes you can use your phone to access the internet on your laptop , as stated before it is called tethering , it uses the phones data connection not the phones wifi connection ...
The exception to that is , if you run the wifi router app on your phone, not plugged into usb, then you can connect your LT to your phone via wifi ...
So one more time ...
Internet Sharing over USB allows your LT to connect to your phones Data connection not its wifi , wifi will be disabled.
Internet Sharing using the Wifi Router on the phone turns the wifi into a Ad-hoc access point, so your LT can connect to your phone over wifi and use your phones data connection ..

---double post ---

my laptop does have 802.1bgn built into it. so at home, it automatically connects to my wireless router. this all works fine. I cannot afford to pay an additional $30 or whatever extra per month for a few minutes of internet access that I need from time to time from a wireless card/dongle or whatever.
if I take the LT to a hotspot (starbucks for example) once again it if fine.
if I go to a location that has neither then I would like to use the phone, either tethered or through bluetooth or wireless to get the laptop to connect to the internet throught the htc phone but I just cannot figure out how to do this.
I can connect the htc and the laptop through bluetooth or by the usb tethering but it will not connect to the internet and I cannot figure out what I need to do to get it to connect.
can you help me on this? thanks

pblocal said:
my laptop does have 802.1bgn built into it. so at home, it automatically connects to my wireless router. this all works fine. I cannot afford to pay an additional $30 or whatever extra per month for a few minutes of internet access that I need from time to time from a wireless card/dongle or whatever.
if I take the LT to a hotspot (starbucks for example) once again it if fine.
if I go to a location that has neither then I would like to use the phone, either tethered or through bluetooth or wireless to get the laptop to connect to the internet throught the htc phone but I just cannot figure out how to do this.
I can connect the htc and the laptop through bluetooth or by the usb tethering but it will not connect to the internet and I cannot figure out what I need to do to get it to connect.
can you help me on this? thanks
Click to expand...
Click to collapse
Ok now we are getting somewhere, do you have a screen that pops up on your phone that asks you how to connect?
If not goto Settings>Connections>USB to PC , then check the bottom box "Ask me ..."
When you plug your phone into usb it should ask you if you want to use , ActiveSync, Diskdrive, or Internet Sharing, if you choose Internet sharing it should goto the data screen right after that and install the driver on the PC.
It then should connect .
So really your question should have been , "How do I share my phones data connection over USB?", or something like that .
..
It is a good idea to have the other connections on your laptop shut off, wifi , lan ...

that button has been checked but it only it says the first two active sync and disc drive but not internet connections. how do I get it to ask me that?

pblocal said:
that button has been checked but it only it says the first two active sync and disc drive but not internet connections. how do I get it to ask me that?
Click to expand...
Click to collapse
umm .. now that I do not know , it must not be in your ROM ...
What ROM are you using on your phone is it stock?

yes stock, have only loaded a few apps, nothing else different only 3 weeks old.

pblocal said:
yes stock, have only loaded a few apps, nothing else different only 3 weeks old.
Click to expand...
Click to collapse
Well, to be honest, I only played with mine Stock for about 3 hours, so maybe someone with a stock one that has played with it more, will wade in here .....

pblocal, somewhere in your start menu, you will find an icon for "internet sharing", just run that, and make sure the two options are set to "USB" and "T-Mobile Data" (or whatever your data connection is named, it should be in the drop-down list), and then hit "connect" in the bottom left.. If you're connected via the ActiveSync option, it should then feed your 3G connection to your pc over the usb cable.

looked all over for that but could not find it.
could it be this phone does not have it? that would be LAME!
thanks for the help guys but I need more....

you can find the "Internet Sharing" app in the tools folder in the start menu.

it is in misc. settings on the phone last setting at the bottom

sirphunkee said:
pblocal, somewhere in your start menu, you will find an icon for "internet sharing", just run that, and make sure the two options are set to "USB" and "T-Mobile Data" (or whatever your data connection is named, it should be in the drop-down list), and then hit "connect" in the bottom left.. If you're connected via the ActiveSync option, it should then feed your 3G connection to your pc over the usb cable.
Click to expand...
Click to collapse
wow! found it, sometimes the most obvious buttons are the most difficult to see. I hooked it up and for some reason it connected automatically for me this time.
thanks everyone for all your help. I can now use my phone to get my laptop on the internet if need be, once in a blue moon!
thanks again.....
ps - this post was done while using the 3g connection from my HTC, not so slow either!

Database Users

welcome