Help in my JasJam - 8525, TyTN, MDA Vario II, JasJam General

hi , i'm new for "jasjam" , I tried updated it ,But now the device dont turn on or power and i can't enter to boot loader
what i can do now ?
please help me
thanks

do you have HARD SPL installed ? (bootloader) Which OS you tried to update ? Are you sure that is you ROM for your device ? Maybe you tryed wrong rom ? give more informations

thanks for your replay
This device was Windows 6 or 6.5
I did not update the rom but I installing the SIM Unlocker

Related

How to reflash rom by micro SD

Hi
I try to reflash my touch dual from NL to CHT, but.....
It looks I forgot to unlock the CID and the reflash programe has stopped on 14%, after that I only can get in the "3 color screen" ...
I try to down a lot of different version Niki's ROM ( also tried 'wizard_romupgradeutility_noid' ) but all of them has hand on 1% or even just report the Erroe [294] : invelue Ventor ID ...
As I learn from xda, it looks only reflash the ROM by miro SD can solve my problem, but I can't found any information regarding how to make the reflash function micro SD for NIKI ....
Anybody can help ..... :'(
Please ...... anybody can help....
As far as i know, you can't reflash your rom by microsd. The only option you have is to wait until valvarin has finished his unbricker. Still, I don't know when the unbricker is finished. Sorry for the bad news. Maybe the gurus have an idea. Keep your hopes high and succes!
What I can do now ???
At this moment, my touch dual only can start to "3 color screen" mode, and also can strat a ROM reflash programme but never can be 100% finish... ( Erroe [294] : invelue Ventor ID / system hang ) ...
Or is possible if I flash back the original ROM ???
Does anybody have the original HTC Dutch ROM from T-mobile ???
Reflash from rom
Hi , I have the same problem also would like to reflash from the sd card as my hermes 200 freezes on the win start screen , still running windows 5 . Hard reset does not work , just back to win start screen . Please let me know if you have some success . Thanks
http://forum.xda-developers.com/showthread.php?t=495262

noob question.. have i bricked it ?

I downloaded the tyler wing kit and copied the cabs over to the phone.. i installed the cabs and reset the phone and now it is loocked on the boot menu as follows :
(htc background)
IPL 5.04.0002
SPL 5.04.0000
GSM 02.79.90
OS 5.4.0.0
AND DOES NOTHING...
perform hard rest and fat format comes up and returns to same screen
removed battery and still the same .
I tried applyinf wm6 ruu since this happens, but will not apply as unable to sync to apply....
is it a brick now ? or is there anything else i can do to recover ?
hold fire on that for now... i managed to figure out the bootloader mode and am currently uploding a rom ...
looking to upgrade to wm6 with the touchflo interface... any hints would help ! .. ps the wm6 rom wouldnt load becasue of a vendor id mismatch ??
ok,,, managed it get it bac up and running with :
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
tried the tyler wing kit again and locks on boot after first 3 apps installed any ideas or links to getting wm6 with touch flo installed ? ( htc p4350)
montythegod said:
ok,,, managed it get it bac up and running with :
RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
tried the tyler wing kit again and locks on boot after first 3 apps installed any ideas or links to getting wm6 with touch flo installed ? ( htc p4350)
Click to expand...
Click to collapse
What is the Tyler wing kit? Never heard of it...
found it here http://forum.xda-developers.com/showthread.php?t=327046
(sticky on main page
I managed to get wm6.1 rom on the phone now tho

Pharos oiginal Rom WM6 Eng HELP

I everyone,
I was trying to intall a new rom in my Pharos but the computer crashed and the instalation was interrupted. Now Pharos doesn't conect, and when i try to install the rom again it says invalid vendor id or update error. I think is dead
Does anyone have the original Pharos Rom WM6 Eng ? or know where i can find? so i can try to save it.
Thanks
rom: 1.11.405.1
rom date: 01/29/08
radio version : 03.15.90
protocol : 4.1.13.59
maybe you can use this one : http://forum.xda-developers.com/showthread.php?t=394721
Thanks Teckynou, i have already tryed that on. Doesnt work, its the wm6.1 (update), i think i have to install again the original Rom in Eng. (and i dont find anywhere)...
have you tryed a hardreset?
http://www.hardreset.eu/htc_pharos_p3470_hard_reset_soft_reset_en.html
Yeap! didnt work....i really need help.
at_mix said:
Yeap! didnt work....i really need help.
Click to expand...
Click to collapse
If all else failes send it to HTC... and theyll repair it .. will probably charge you since you tried to flash (an unofficial) rom but its better than having a brick.
Maybe someone else has a better idea?
lots of luck to you!
Another Original ROM
http://forum.xda-developers.com/showthread.php?t=403957
What U mean by "DEAD"...?
Have U managed to have the tri-colors boot screen?
Tri-color Boot screeen is looked similar to this.....
http://www.ismodel.net/forum/richedit/upload/2kcf486c647d.jpg
If not,...
Try the method below to get the Tri-color boot screen. Though it is for ELF, it usually works to all HTC devices. Surely..work on Pharos..
I recommend Hold down camera key => Press/Release Reset Button at the back => Release camera key after you have the tri-colour boot screen showed up.
http://wiki.xda-developers.com/index.php?pagename=Elf_Resets
Then you can flash an original ROM... Note it is OK that 'Active Sync' symbol show "NOT CONNECT".. U can still proceed with Flashing!!!!!
Let me know if it works this time.......
bita said:
Another Original ROM
http://forum.xda-developers.com/showthread.php?t=403957
What U mean by "DEAD"...?
Have U managed to have the tri-colors boot screen?
Click to expand...
Click to collapse
Hi Bita,
Yes, im able to enter the reboot (the tri-colors boot screen), the only problem is the rom i try to flash i get the ERROR vendor id or update error.
I'll try that original rom.
Thanks

how to downgrade athena100 spl-v1.20oilpro to factory defalt plz help me????

i have ATHENA 100 in T-MOBILE Ameo........ i update lot of rom's on my ameo with success . my phone status is: IPL-v1.00 SPL-v1.20. Olipro.
my bad luck i try to update with that rom (Athena_SPL3.5_WM6.1_WWE_R6.1-Michy) after 92% rom got error & phone restart. after that my Ameo hang on startup. i put my phone into usb mode by pressing CAMERA key + POWER & try to upgrade with lot of diffrent roms but i got ERROR[244] INVALID MODEL ID (pic attached below) plz help me how can i update my phone in working condition??>......................
This may help!
Hi Kanwalgee.
The problem is that you tried to flash a ROM for SPL3.5 and you have SPL 1.20.
I read some of that in this thread. Read and it maybe help you to correct the problem.
Then go to the mobile 6 section and read this other thread.
I hope this will useful for you.
Regards.

I have a big problem, could you help me?? pleasee!!

Helle everyone! First of all, sorry for my bad english! However some days ago i read that htc have done a wm upgrade for my phone (6.1) i didn't know that it wasn't for gsm version.. when i did thet upgrade i had on the phone the onyx rom and the cid unlocked, with this upgrade the spl came back to the original but the original rom doesn't start the installation. so i have the spl 2.26.0000 and the onyx rom that doesn't start and when i turn on my phone it remain in the display of 3 colors of upgrade.. what i can do now?? i have the warranty cause i bought the on july.. plese help me, how can explain them this fact? i'm in yours hand..
thank you
Jasper
Hi
I think you should try to cid unlock again, if it works you could flash the onyx again, if not there's a lot to read in here http://forum.xda-developers.com/showthread.php?t=406721
Good luck
i've tried a lot of times to unlock the cid but it give me the error: ERROR [200] Invalid update tool
Please get newer update utility
I used the latest version of spl and it's the same.. I tried to dump the original rom and it give me the same error 200.. Further there is no RUU in the display of htc..
Sorry for the english
Nobody can help me??
Hi JesperHTC-Touch !
Do you use windows xp or Vista to sunc yourè phone?
xp, but i have the phone locket to the bootloader and activesync it isn't green..
Hi JasperHTC-Touch!
I have also got that ERROR [200] Invalid update.
I recomend you to install IPL & SPL 310 you can find it her http://forum.xda-developers.com/attachment.php?attachmentid=130771&d=1226977938
http://forum.xda-developers.com/attachment.php?attachmentid=130567&d=1226919217But use this tool to do the upgradehttp://forum.xda-developers.com/attachment.php?attachmentid=101826&stc=1&d=1217022319
Dont be worry i diddent got the color bar either. But be shure to have at least 50% of battery capacity before yoy do the upgrade. Put the file from (310 inside the catalog in 226 /RUU and replace the file RUU_Signed.nbh that you downloded at press theelf-uspl.exe and read carfully what you seen on the screen and dont dissconnect youre phone before you have started up the phone completely. Thats what i did and it works for me. God luck
Kindly MacRoy
I did what you told, but it doesn't work, i'm triyng to upgrade with all the original rom of this phone.. it's impossible i can't unbrick my phone
Another fact it doesn't enetr in ruu-bootloader.. only bootloader
Try to hard-resetting the phone!
just tried and doesn't work.. i spent 350 euro in july for this phone!!
Hi
try the unbricker rom method mentioned in this thread
http://forum.xda-developers.com/showthread.php?t=446242
it is a trial original rom that can be flashed from SD card then after that you can CID unlock again (good Luck)
dowsn't work :'(
i also tried to unlock the spl from microsd but it give me the error: invalid certificate..
Nobody can help me?? i don't want bring it to the guarantee.. sorry for the bad english..

Categories

Resources