Hey,
My fiancee has a HTC Hero and she's having some issues with it today.
She was on a call when all of a sudden the voice when all scrambled and screachy. Then the call dropped out.
After that, she hasn't been able to make or recieve calls.
When she tried to make a call the phone is silent on the dialing screen, then beeps once and returns to the phonebook.
She just recently received the OTA 2.1 update.
Thanks in advance!
If it wasn't a network outage (other handsets work at same location), tty rebooting (with battery removal), and if that doesn't help, return the phone for replacement. Some component inside might have burned out.
Thanks, she tried a reboot again and it seems ok. I did notice that she had WiFi turned on, so I have now turned it off to see if the issue occurs again.
Thanks,
Sent from my HTC Magic using XDA App
Jesterarts said:
Hey,
My fiancee has a HTC Hero and she's having some issues with it today.
She was on a call when all of a sudden the voice when all scrambled and screachy. Then the call dropped out.
After that, she hasn't been able to make or recieve calls.
When she tried to make a call the phone is silent on the dialing screen, then beeps once and returns to the phonebook.
She just recently received the OTA 2.1 update.
Thanks in advance!
Click to expand...
Click to collapse
I get this occasionally as well, calls drop and then not able to connect, despite having full signal. A reboot does tend to help, I too have noticed that if WiFi is on it seems to happen more often. Its a shame, I hoped this may be resolved by the 2.1 update
Bump!
I have had many calls missed as "calls are barred to this number" It is a joke! please help!
Related
I thought this was only a ROM issue as I was using a ROM that seemed to have many problems with it other than this, but when I changed to another ROM, the problem still persists.
The problem is that sometimes when I get incoming calls, the phone will just vibrate and crash with no backlight on the screen and only showing the Incoming Call bubble with the caller ID in it. I'm not exactly sure what the people calling receive, I think they just get silence, no ringing tone at all.
I'm wondering if anyone else has had this issue or if it's just me.
I also have this once in a while. Mostly, when I didn't reboot my Qtek for several days. The device freezes displaying the Incoming call bubble and it keeps vibrating until I reset it. I guess the caller gets the busy signal or gets re-routed to voicemail.
Cheers,
-mARKUS
the same here...sometimes freezes and show "incoming call" if i dont reset for few days.. i got used to that
same here. any idea for a solution?
poedgirl said:
I thought this was only a ROM issue as I was using a ROM that seemed to have many problems with it other than this, but when I changed to another ROM, the problem still persists.
The problem is that sometimes when I get incoming calls, the phone will just vibrate and crash with no backlight on the screen and only showing the Incoming Call bubble with the caller ID in it. I'm not exactly sure what the people calling receive, I think they just get silence, no ringing tone at all.
I'm wondering if anyone else has had this issue or if it's just me.
Click to expand...
Click to collapse
Hi
First of all wich ROM are you using that causes crash?
I had this issue in almost all ROM´s for UNI when I had installed HTC Home
Finally I tried Tomal´s v7.6 and all problems gone
Hope this helps
Cheers
orb3000 said:
Hi
First of all wich ROM are you using that causes crash?
I had this issue in almost all ROM´s for UNI when I had installed HTC Home
Finally I tried Tomal´s v7.6 and all problems gone
Hope this helps
Cheers
Click to expand...
Click to collapse
yea ur rite had this issue in tomals v7.6 also but when i uninstalled htc home it was ok after that.
Hey people, you know when you call someone and it shows your recent dials? Mine doesn't show anymore..I've tried soft resetting it and it doesn't work either. How can i fix this problem?
Thanks.
The similar problem occurrs to me also, I just finished upgrade my G1 1.6 to 2.2. Everthing work perfectly normal except nobody can call to my mobile. The incoming will be sent directly to my voicemail and there is no incoming call screen shown at that time at all. However, that call will be shown on the call log screen as a received call. What should I do to fix this problem?
erythia said:
The similar problem occurrs to me also, I just finished upgrade my G1 1.6 to 2.2. Everthing work perfectly normal except nobody can call to my mobile. The incoming will be sent directly to my voicemail and there is no incoming call screen shown at that time at all. However, that call will be shown on the call log screen as a received call. What should I do to fix this problem?
Click to expand...
Click to collapse
I think you are lost little noobie...
nrfitchett4 said:
I think you are lost little noobie...
Click to expand...
Click to collapse
ha ha ha... well said.
to the op:
check if your date on the mobile is wrong. this usually happens if you have changed your date .
This may be associated with the CM6 that I'm running, not sure. But today it just started happening. When someone tries to call me it rings about 2-3 times then BEEP BEEP, dropped call for them. I can make calls outbound, but when someone tries calling me they cannot. Any ideas?!
Edit:
Looks like I can receive calls from land lines, but not AT&T phones. This is driving me nuts..
Edit2:
Still doing it today as well. I don't get it!
If you have an older Liberated, can you flash it and see if problem persists?
Tried CM6 and returned back to Liberated
I've read a few similar threads and it seems that many people have noticed the same but haven't seen any real solution.
I noticed that when I try to call my phone, the 1st attempt will be missed (it will either redirect to voicebox due to unavailability or it will ring as disconnected and never get notified). The 2nd attempt will ring ok.
I haven't seen anything helpful except from turning 3g off but I have it on auto and use the mobile widget which I assume does the same.
Anyone noticed the same? it's worth to try it though because you may have the same and be unaware of it. (Try to ring your phone when its in standby and hasn't been used for several minutes)
I bought the DHD yesterday, in the few hours i used it i didn't notice the issue you describe. Just to be sure i called my phone a minute ago and i had no problem.
I have 3G turned off and i'm not using voicebox (using missed call alert instead).
i have a feeling its because if you turn the phone over it rejects the call. i keep doing this because my phone is in a slip case all the time. anyone know how to turn it off?
rossysaurus said:
i have a feeling its because if you turn the phone over it rejects the call. i keep doing this because my phone is in a slip case all the time. anyone know how to turn it off?
Click to expand...
Click to collapse
No, it doesn't . It just mutes the sound but if it's already turned over when it receives a call, it will ring. You can change this behaviour in settings-call as well as volume control for flip case.
I tried several more times and it doesn't happen now. It just happened a few times when I tried to test. The only setting I changed now was for GSM-3G not to force 3G connection on for all the time. Maybe that helped but now I'll have to see how my data connection is affected.
andreasy said:
No, it doesn't . It just mutes the sound but if it's already turned over when it receives a call, it will ring. You can change this behaviour in settings-call as well as volume control for flip case.
I tried several more times and it doesn't happen now. It just happened a few times when I tried to test. The only setting I changed now was for GSM-3G not to force 3G connection on for all the time. Maybe that helped but now I'll have to see how my data connection is affected.
Click to expand...
Click to collapse
Yesterday whilst in town, a friend said he had tried to get me several times, only to get a network message that the phone was unavailable. seems fine each time i test it though, and there is a strong 3g signal around here. I put it down to everyone in town christmas shopping and net network cell being clogged up with people calling each other to find out where there other half is lol.
What network are you on? I'm on Orange, and get this all the time. It seems to be when I'm in an area where there's only gprs which cannot work with voice calls simultaneously. For some reason the data signal is given priority and the voice call is rejected. Surely it should be the other way round? Not sure if this is a network problem or a software problem... if the latter, is it HTC or Android?
Sent from my Desire HD using XDA App
Does anyone have this issue? When ever I am dialing out, there are times it seems like the call is going through, but I have to "end" the call so the call initiates... Its odd, but generally after that my calls are fine. Doesn't matter if its through Bluetooth, wifi calling, or regular calls through the phone itself.
How can I fix this if there is a fix? Running latest OTA, NMJ51B via Sprint.
~~Tito~~ said:
Does anyone have this issue? When ever I am dialing out, there are times it seems like the call is going through, but I have to "end" the call so the call initiates... Its odd, but generally after that my calls are fine. Doesn't matter if its through Bluetooth, wifi calling, or regular calls through the phone itself.
How can I fix this if there is a fix? Running latest OTA, NMJ51B via Sprint.
Click to expand...
Click to collapse
I've had this happen across a couple of phones with the Google Dialer... And actually with a Samsung just before I got my PH-1...
Happens every day to me
~~Tito~~ said:
Does anyone have this issue? When ever I am dialing out, there are times it seems like the call is going through, but I have to "end" the call so the call initiates... Its odd, but generally after that my calls are fine. Doesn't matter if its through Bluetooth, wifi calling, or regular calls through the phone itself.
How can I fix this if there is a fix? Running latest OTA, NMJ51B via Sprint.
Click to expand...
Click to collapse
Nope
I've had happen several times where after dialing (regular phone app) and it shows the call "connected", it takes about 5 to 10 seconds or so before there is any audio. Once the other end had already answered before the audio comes on, but usually I hear the ringing after the delay. Doesn't happen all the time. I don't make many phone calls out.
I usually see the app hang at the end of the call. Not all the time about once every day or two.