Related
Hello , I flashed dutty's 1.8 ROM on to my HD , then on that same night I applied a screen protector and left it overnight . On the next morning , I tried to scroll to the messaging tab in TF3D , but my screen didn't respond , I think it has something to do with me using a bit too much solution to apply the screen protector , which still got scratched in the end .
I have decided to try using the warranty to fix the phone but first I want to flash back the stock ROM and SPL , is there a way to do this without using the touchscreen at all ?
EDIT : Ok now i'm stuck ,I've flashed a stock ROM but I can't restore stock SPL , i'm stuck at the 'align screen' section and the HardSPL RUU gives me a connection error 202 , last time i solved this by unchecking 'enable faster activesync' or something like that , but i can't go there now
Any advice ?
Thanks
Splink said:
I want to flash back the stock ROM and stock SPL , is there a way to do both of these tasks without using the touchscreen at all ?
Click to expand...
Click to collapse
I can't see why not, using the RUU method might be easier but the SD card will let you do the ROM, not sure about SPL. Have a look at the tutorials.
Hello! I'm a french user and got the same problem since a few weeks.
Everything is left original on my phone (rom , programs ,...)and sometimes the screnn freezes after hanging up a call...impossible to get any reaction on the screen , only solution...soft reset and then the screen reacts perfectly again!!!????
Didn't find any solution on the web.
Kangburra said:
I can't see why not, using the RUU method might be easier but the SD card will let you do the ROM, not sure about SPL. Have a look at the tutorials.
Click to expand...
Click to collapse
Thank you for your help, i've flashed a stock ROM with success
EDIT : Ok now i'm stuck , I can't restore stock SPL , i'm stuck at the 'align screen' section and the HardSPL RUU gives me a connection error 202 , last time i solved this by unchecking 'enable faster activesync' or something like that , but i can't go there now
Any advice ?
Thanks
Splink said:
EDIT : Ok now i'm stuck ,I've flashed a stock ROM but I can't restore stock SPL , i'm stuck at the 'align screen' section and the HardSPL RUU gives me a connection error 202 , last time i solved this by unchecking 'enable faster activesync' or something like that , but i can't go there now
Any advice ?
Thanks
Click to expand...
Click to collapse
I've got exactly the same problem:
my touchscreen isn't working any more, and for warranty reasons i want to flash back to original rom and stock spl. Rom worked fine (O2_XDA_Diamond_1.93_RUU), but now I can't go back to the original stock spl.
I tried as to be seen here: http://forum.xda-developers.com/showpost.php?p=2324829&postcount=39
But I've got the same "connection 202 error" as splink...
By trying the installation from the Bootloader runing on my Diamond, the screen and my pc shows an completed 100% installation of the stock spl, but when I take a look now at the bootloader, it's say again that im using the "SPL-1.40.OliNex"
Does anyone has got any idea how to get back to the original stock spl?
Had a similar problem using HSPL with communication errors when trying to get back to stock radio and stock spl. I used USPL in the end by first flashing the stock rom, then the stock radio and finally the stock spl (1.14). Then I reflashed stock rom and it all worked.
Using USPL you just rename the SPL rom image "BLACIMG.nbh" but you should be aware that there are risks (see post 236) involved doing it this way. I had no choice and took the risk and everything was ok.
Do read about it all in the USPL thread and there is some useful info in the HSPL thread as well.
Hello XDA-ers.
I've flashed my phone with the new ROM from the htc website.
And today i wanted to put Dutty's ROM on it, but it wouldnt flash.. the update would get stuck on 0% and then nothing happens for 20 minutes..
I also tried the udK_Lea_R5_MW6.5_WWE rom but the same thing happened.
Is there something wrong with my phone?
Thanks in advance
You need to use Hard-SPL.
READ THIS and follow instructions!
http://forum.xda-developers.com/showthread.php?t=520312
Simple things first:
Have you run HardSPL? (Latest version is required, 1.83 at time of writing).
Have you tried loading into Bootloader manually before attempting to flash? (Hold VolDown when powering on).
If those fail, try and identify what has changed since you flashed the original ROM.
Aaah didnt knew i needed HardSPL..
First time i flashed my ROM it immidiatly worked =p
Thought that ROM screwed my phone in ever being flashed again .
Just needed the HardSPL ^^
Working smooth now, thanks !
Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
fish_ead said:
Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
Click to expand...
Click to collapse
did you try MTTY drivers?
fish_ead said:
Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
Click to expand...
Click to collapse
Remove the battery and replace it
fish_ead said:
Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
Click to expand...
Click to collapse
Sounds like a bad flash - I have used Dutty´s HG 0.8 without any troubles.
Did you try to go into the bootloader (turn off device, vol. down + power on at the same time) on the phone, to connect it only then to the PC through USB/active sync?
How to Fix
I had same problem with this ROM. I put my phone in boot loader (volume down + soft reset) and flashed a different rom. All now ok.
Hope this helps
Guys, I think the title of this thread is misleading, flashing incorrectly any ROM would give you that result, any error from downloading to flashing can get your device in a temporary and reversible trouble, just put your device in bootloader mode and flash it again, with another ROM, you can try v 0.8 again but i would recommend you to download it again.... anyways... you do have HSPL right?
You have bad radio ROM version, use recommended Radio for Dutty´s ROM
fish_ead said:
Hi All, I'm a newbie and I'm looking for some guidance as I've broken my 3 week old HD2.
I've just flashed it with the new Duttys Leo HG V.08 5.2.23529.5.5.0] rom and done a hard reset but when the phone comes to the end of the 'preparing your phone' process it reboots and hangs on the white HTC screen!!
I've tried several time to re-flash from the pc and the SD card but the flash won't load.
I just wanted to pose the question before I send it back to HTC.
Any idea would be appreciated, Thanks.
Click to expand...
Click to collapse
Hi,
I think personaly that when peoples are taking time to help you, the minimum respect is to answer to the questions and give us the result of our comments!
WE (the forum) are helping you! Handling like you do will not encourage others to help you!
Have a good day!
I think this is Radio related. I have had numerous people have the same problem upgrading from older 1.48, 1.66 etc with stock radio and the get this same problem. Almost 95 % of these have been corrected by flashing the TMOUS Radio 2.08.50.08.02 Radio. Then flashing the ROM again. I started a new Thread asking for input from others and when this is confirmed 100% then I will change the title of the Thread to Warning.
Resolved
Thanks to all the reply's with advice to my post. My HD2 is now back up and running.
Basically after leaving the device on charge for 2 hours I then tried another re-flash from my pc which worked first time.
At the time of the initial flash the battery was show 86% so it's odd how charging the battery could resolve the problem - I'd previously tried 5 other ROM's over a 3 week period with no problems but this is my first v.08!!
I choose a Dutty ROM as I'd read a number of good posts about his work and I must say this ROM seems fast and stable so it difficult to put a finger on a cause - Either way I'm happy - cheers.
and don't forget to change the topic title!
htc12345 said:
and don't forget to change the topic title!
Click to expand...
Click to collapse
I'll second that notion. We certainly don't want to mislead anyone about the excellent quality of Dutty's ROMs.
I know apparently this isnt the best way to flash your HD2, but im stuck without any access to windows. (mac user)
i cant seem to find step by step instructions on how to do this properly....
is there a link somewhere i can get to so i can figure this out? isnt it as simple as copying the custom.nbh file to the root of my memory card, and entering the bootloader screen?
Sorry for all the noob questions.
take ruu_signed.nbh, copy it to sdcard formatted fat32 (2gb cards seen to work best) rename it leoimg.nbh, boot to bootloader and it should detect the image and ask if you want to flash.
it still requires hspl, unless you have a goldcard(easier to borrow a pc for two minutes to apply hspl than make a goldcard)
the phones already been flashed with hspl.
i just want to change the rom!
Thanks for the tips im going to go for it right now
newnoise1024 said:
the phones already been flashed with hspl.
i just want to change the rom!
Thanks for the tips im going to go for it right now
Click to expand...
Click to collapse
Hi
One advice you have to remember is DO NOT flash any official rom with this method. If you do it will replace the hspl and you will be stuck.
Good luck
sabes143 said:
Hi
One advice you have to remember is DO NOT flash any official rom with this method. If you do it will replace the hspl and you will be stuck.
Good luck
Click to expand...
Click to collapse
True, flashing a stock rom via sd card will overwrite hspl with the new stock spl, but you will not necessarily be stuck. That used to be the case before hspl2, as the original hspl only worked with spl 1.42.0000. HSPL2 now works with 1.42.0000, 1.66.0000 or 2.08.0000 spl's.
or just throw your mac away and buy a PC
What many forget is that you actually need an SD card and not SDHC, as those will not work.
understand u already flash hspl,
microSD / microSDHC will work as long it is formatted with FAT32 fs.
just copy the *.nbh to SD root & rename it to LEOIMG.nbh.
enter bootloader, follow on-screen.
if bootloader cant find any rom image, run scandisk & try again.
gd luck.
I just flashed this rom.
It seemed to be fine. It installed and looked a-ok.
I had a look around and every thing looked as it should.
I added "26.4 column Start menu.cab" and now the phone won't reboot at all.
It gets to the HTC white screen, and then hangs.
Any ideas?
Is it a conflict between the 4 columns app and the ROM?
url_paul said:
I just flashed this rom.
It seemed to be fine. It installed and looked a-ok.
I had a look around and every thing looked as it should.
I added "26.4 column Start menu.cab" and now the phone won't reboot at all.
It gets to the HTC white screen, and then hangs.
Any ideas?
Is it a conflict between the 4 columns app and the ROM?
Click to expand...
Click to collapse
when you say "just flashed this rom", what rom?
also, did you read ALL the first few posts in the chefs thread? chances are it requires a specific radio version
either that or you didn't do a hard reset after you flashed.
apologies, I replied in here when I thought I was in the HTC Energy thread.
The device rebooted after the flash.
Does that not count as a hard reset?
samsamuel said:
Is it T Mobile usa? if so, then you have flashed an incompatible rom.
tmous (T Mo US) phones will opnly take roms based on 2.10, the rom you have installed is 1.66 (D 1. 66. Kumar)
Kumar has a rom in the Tmo US section based on 2.10, you should use that, not the one in teh normal hd2 section.
With power off, press and hold "volume down", tap the power key and continue to hold vol down until you get the three coloured screen, connect to usb, wait for word 'serial' to become 'usb' and flash a compatible rom.
Click to expand...
Click to collapse
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Try installing the recommended Radio
url_paul said:
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Click to expand...
Click to collapse
I ran into the same problem and all I had to do was to get the phone into Bootloader and then flash the radio recommended by ROM Cook.
also the same problem
I have also this problem, but I think it's in the rom, when I installed the rom, everything seems ok, but after a reset, the screenthat I get is the white HTC screen.
After a hard reset it is ok, but after a reset it is the same problem.
Then I thought, i take an older rom, but when I've installed the rom he is automatic installing the cab file's at the end of the installation, and he's going to automatic reset the HD2. After the reset I have the same problem as with the new rom.
So the biggest problem is that I can't install another rom or radio because the rom don't start for 100%, and when I do a hard reset, after the reset at the end of the installation I get the white HTC screen.
What can I do, can I fix this problem?
groot321 said:
I have also this problem, but I think it's in the rom, when I installed the rom, everything seems ok, but after a reset, the screenthat I get is the white HTC screen.
After a hard reset it is ok, but after a reset it is the same problem.
Then I thought, i take an older rom, but when I've installed the rom he is automatic installing the cab file's at the end of the installation, and he's going to automatic reset the HD2. After the reset I have the same problem as with the new rom.
So the biggest problem is that I can't install another rom or radio because the rom don't start for 100%, and when I do a hard reset, after the reset at the end of the installation I get the white HTC screen.
What can I do, can I fix this problem?
Click to expand...
Click to collapse
RTFM. These constant posts about white screen hangs are really getting frustrating. Does nobody follow the forum rules of searching any longer? There's nothing wrong with the rom, the user on the other hand I'm not so sure of.
YOUR RADIO VERSION IS WRONG
url_paul said:
I've just been digging through and saw this, I have the 3 colours and USB.
Gonna try and reflash and see what happens.
These forums own!
edit: re-flashing it went the same way, would hang on boot.
I've gona back to using:
_HTC HD2_RUU_Leo_HTC_WWE_1.66.405.2_Radio_Signed_15.30.50.07U_2.06.51.07_Ship
for the moment.
I'll look and see what it is I missed that stopped the energy rom from working as advertised.
Click to expand...
Click to collapse
If you bothered to read even just the last 5 pages of the Energy thread you would have seen probably 20 mentions of the problem. Energy rom won't work with a x.xx.51.xx radio.
I'm sorry i know it's against the rules to be starting a new thread but it's been a week i've been asking for help and no one noticed. This is just a try to come noticed.
I installed task 29 on my blackstone. I had olinex 1.56 installed and later did the task29 with radio 1.13, 1.14 and 1.17 After successfully doing it i went on step 2 that is installing a clean rom. I tried these roms
blackSTONEhengeHyPerSlim_4_1
RUU_TOUCH_HD_MARYONE_23148_WWE_191110
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship(3)
They get installed but after i store the contacts and everything it gets stuck if kept for like half an hr. The screen doesn't respond but power button and the volume button works.
I took my phone to a repair center and they couldn't fix it. So please help me i've just got only one phone.
I don't mean to offend any moderators by this but i'm just asking for your help. Thank You
Try reinstalling stock ROM after Task 29.
Restore ONLY contacts, and then try using device for several days.
DO NOT install any other software!!!
If it works, then problem is in some data or software you're restoring.
If not, restore original SPL and original ROM and try again.
If it does not work... and service can not help you... then sorry...
Hello i did reinstall the stock rom after task 29 and i was using pimbackup for restoring but that freezed my phone so i installed the stock rom again and thought of not using it. Did that but nothing much helped.
I hope believe these are the correct shipped roms
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship(3)
Everything on xda has worked like wonders for me. Be it android on any other rom but right after task29 nothing seems to be working on my phone.
One thing i've noticed after installing any rom after task29 is if i get to the bootloader it gets me to a 1 sec white screen saying no image found. I hope what's causing a problem.
Do you understand WHAT Task 29 is?
It formats the partition drive of your device where the ROM resides. Meaning, it wipes any data regarding ROM.
So of course it would say "No image found".
I don't know which ROM is stock for your device. Try to update ROM via HTC site.
If lucky, it will suggest / let you find adequate ROM.
For my device it's 1.56.407.2 (German)!
If unlucky, it will say "Not supported" or something like that - then go for Orange 1.59.61.2 ROM.
And you might try one 1.5x ROM flash WITHOUT Task 29...
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Thanks will do it and keep yu updated with it..
simplistian said:
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Click to expand...
Click to collapse
Thanks i tried installing the stock rom like you told me but then got stuck on the screen alignment screen. I later installed blackSTONEhengeHyPerSlim_4_1 and now it's responding to every touch. Thanks alot. I hope this stays like this and yes instead of restoring i forwarded all the contacts through bluetooth. Owe you a BiiiiiiiiiiiiG thanks..
Too soon to be happy as same again..I don't think there should be a problem with touch as it works fine for first 1hr but right after something gets stored by something i mean contacts it stops reponding after sometime. The volume and power button work all fine. I can't make out the problem. Any ideas or suggestions. Shall i make a video and post ??
FIRST you have to make it work with factory settings - stock SPL and stock ROM.
After that flash what you like...
I think you have to follow Bodisson's suggestion, do everything as stock and retest without restoring anything. If it still failed...... you should have it repaired
Good luck!!
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Bodisson said:
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Click to expand...
Click to collapse
Glad to see somebody researching things out and settling on a radio he prefers due to performance rather than those just going for latest
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
kulwant said:
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
Click to expand...
Click to collapse
All rom's should work with each radio to be honest. Glad your device is working better, though still a little baffled why you're still having difficulties
EDIT - You are on a wm6.1 rom. Is the rom based on 1.56+, if not you may need to revert to HSPL 1.14
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
kulwant said:
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
Click to expand...
Click to collapse
I'm baffled but still want to get to the bottom of your issue and would appreciate any help from other members who may have idea's on how to solve your issue. From what I've read everything you have done is correct, but I don't like being stumped!!
If we start from the start, we may get to the bottom of this........
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
kulwant said:
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
Click to expand...
Click to collapse
Well as you know a T29 formats device so you need to flash a rom or you'll be stuck at boot screen. Before you do a T29 it states you must have HSPL on your device first. Now from what I've read you did have HSPL on first and your T29 worked as you where stuck at boot screen afterwards.
I'm assuming you turned device off, booted into bootloader then flashed youir rom (blackSTONEhengeHyPerSlim_4_1) which is based on 1.56+ as was your HSPL.
This all seems correct so I'm not sure what went wrong.
Is above all correct?
Did you try a T29 again and flash different rom or did you just flash different rom over existing?
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
kulwant said:
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
Click to expand...
Click to collapse
Right, I never put any files in same folder as it only confuses flashing process and can cause issues. I.e. put T29 in its own folder, radio 1.14 in its own folder and then rom in another folder.
Do a T29 and when its complete, I.e. stuck in smart mobility screen. Then you take out battery to turn phone off. After this put phone into bootloader and flash rom. Then flash radio after it as a lot of roms have a radio file included
...........................
Sent from the improved version of Tapatalk, better known as Forum Runner