Database Users

got hardspl now i'm stuck

a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!

lilguy227 said:
a similar question has probably already been posted
i have a tmobile hd2
i successfully hardspl to it
i flashed the energy reference rom
then i realized that i needed to use the task29 tool before
i flash any rom... did that, hard resetted, and then tried flashing again (energy referecne) using the sd card method
and i just get stuck on the "NRG" screen
tried the other custom ruu method getting the same results
using the radio 2.07.50.27
i put back the regular spl to flash a stock rom but still no luck
i know the phone isn't bricked i can get to boot loader, hard reset
any help would be much appreciated
Thanks in advance!
Thanks!
Click to expand...
Click to collapse
ok as from my knowledge you dont necessarily need to do task29 if its ur first time flashing (cuz i didnt and i got very good results) so i think u messed up in tht part.. but its ok, now you prolly want to first --> do a task29 again... second ---> get the nrg rom and flash it.... third -->get a radio of 2.10 or higher and flash tht....and just to play safe flash everything using custom ruu (i got better results using them...just saying)... also when u do each flash and its suspenseful dont boot up the phone, just take out the battery and back into bootloader.
hope this helps... report back lol

^thanks man
Okay so heres how it goes, my phone is def not bricked
custom ruu has only worked once for me
now whenever i try to use it it always gets stuck at 8%
i found that if i flash it at night and hard reset. wait til morning and turn on the phone
then it loads past the nrg screen and into the OS.
i'm currently trying to get it back to stock and i downloaded the tmobile update
but it doesnt seem to work, it also keeps stopping at 8%
i disable the anti virus stuff and i plug it in to the back of my computer

sounds like a defect
sorry to bust your bubble bro but it sounds like you got a classic case of a defective leo, i too did the same steps you did and it turns out my main board wasn't any good and the phone kept overheating, turns out when flashing custom roms they tend to put more pressure on the snapdragon then a regular stock t mobile rom. i know this sounds crazy but i believe it to be true, so with that said you got two options, one get back to t mobile customer care and get a replacement. or do what i did and find a repair shop and let them know that your leo either needs a new mainbaord or a new heatskin like mines did, it cost me 80 dollars which wasnt bad since my leo was a gift and i couldnt give it back to t mobile... hope that helps in some way
p.s. sorry for the edit but if you cant do either of those of what i suggested, try this get yourself a nice icepack nthe size of your phone and mount the leo on top of it whenever your using it, so that sucker wont overheat. once again i hope i helped

Bricked HD2 Leo

Hi every one. I had a problems with HD2, my original ROM was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another ROM, so I tride to flash a new ROM, did a Hardspl2 and now my HD is bricked, with triangle and no ROM also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of ROMs and no luck at least .... Triad also flash with original ROM via Micro SD no luck... Please help me!!!! URGENT!

prieditis said:
Hi every one. I had a problems with HD2, my original room was with a lot of problems, it restarted without no reason and so on. My colleage suugested to flash with another room, so I tride to flash a new room, did a Hardspl2 and now my HD is bricked, with triangle and no room also shiped (donwloaded from HTC web page by serial) is not working. Anybody help me? I tried lot of rooms and no luck at least .... Triad also flash with original room via Micro SD no luck... Please help me!!!! URGENT!
Click to expand...
Click to collapse
Firstly its "ROM" not "room".
What do you mean "with triangle" ??
Which HD2 do you have and which ROM did you try flashing?
Can you get into tri-color bootloader mode?

Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device

prieditis said:
Sorry i post my thread quickly. Yes i tried to flash a ROM, i have HD2 512MB. I tried to flash a 3.14.405 rom. triangle - i can get in tri-color bootloader mode, but when i try also flash original rom there is no result, it crashes on 9 or 17%. Triangle is a sign when i switch on a device, i believe it means ther eis no windows/rom on device
Click to expand...
Click to collapse
your device is not bricked... get into bootloader and do a task 29 (LOOK IT UP)...
Then start from scratch... Magldr, then whatever ROM you want.

Can you explain me? Please step by step... Thanks in advance

prieditis said:
Can you explain me? Please step by step... Thanks in advance
Click to expand...
Click to collapse
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...

prieditis said:
, my original room was with a lot of problems, it restarted without no reason and so on. ..with triangle and no room aURGENT!
Click to expand...
Click to collapse
... OK, no room = homeless!

If you can't pay rent, I'm afraid I'll have to ask you vacate the area.

Possible fix stuck bricked hd2 radio no rsa information
Please read the whole post first sorry about the mess it is my first post thanks to everyone here on xda who came up with everything i used to do this There is guides for this xda has a lovely list of tmous roms if you are on t mobile in the us http://www.xdafil.es/index.php?path=HD2/TMOUS/
i would start with the RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip
extract the .exe file if it has one than extract the RUU_signed.nbh from the .exe file using win war or 7 zip than rename it to LEOIMG.nbh and place it on a newly formatted microsd not a microsdhc and i had problems with anything over class 4
place it in your phone and hold the volume down button and power button as loading comes up let off volume down power button will start the flash(i was only able to do complete flashes in the freezer if not it would hang or get radio errors)
i also had a tmous which did not want to flash the radio i would get an an error and rsa fail it sounds crazy but i wrapped it in plastic and stuck it in the freezer for a while before and during the flash this was the only way i could install the radio and actually see rgd information on boot screen after this first one you will have an old test rom with an old spl you cannot change to hspl from here i also was not able to go straight to 2.10, i had to step up from RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip, to RUU_Leo_1_5_TMOUS_2.03.531.6_Radio_Signed_15.30.50.07U_2.06.50.23_3_Test.zip the same way i did the first one,hard resetting after each one and let it open windows completely to know it is working. than i believe there is an hspl3 file somewhere out there with all thanks to DarkForces Team HardSPL3 by bepe and Cotulla i will try to attach it that will work with spl 2.02 wich you should now be on now you can download your radio in the master radio thread http://forum.xda-developers.com/showthread.php?t=611787
i also just renamed the ruu_signed.nbh to LEOIMG.nbh and ran through sd i seem to have problems through usb and i was trying to be careful with the radio
once you got the radio you want you could flash the rom preferably running task 29 before or get yourself magldr to install through nand i also stuck my laptop an the freezer with the phone to get wp7 completely installed i did all this mess with a phone that had a broken screen i think there is like thermal compound over the processor to the case that is not on right and overheats when not in the operating system like a crappy old laptop with its fans full of stuff trying to install xp. and while a stock rom was being installed the usb was pulled during the radio installation i hope this helps i belive i saw one post to stick it in the freezer out of everything that i think helped the most.i also notice i have to put it in the freezer at boot too sometimes or i will get a fatal hit error i think its just over heating..... i also have an hd2 which has never been opened before that i have never had to stick in the freezer it gets flashed quite abit right now running gingerbread on normal hd2 and wp7 dual boot android 2.2 on the one i had to freeze i hope this helps i was here for weeks reading reading i was stumped cus my first hd2 and g1 were so eazy i will update this post once i stop being lazy and open the phone again to replace the goop to see if that is the problem
Thank you for reading my jumble and thanks again to all you phone heads here on xda which without you none of this would be possible and i would not have wp7 and gingerbread on my hd2 : D

I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)

prieditis said:
I did a task29, flash a ROM succesfully, but now it' s stucked in HTC loading mode (Shows a HTC and nothing happens)
Click to expand...
Click to collapse
succesfull only one time, now i tried reflash an original rom once again and no results, still stucked in triangle. It's a first time when something like this happens
P.S. Sorry for my english..

spyderman33 said:
you need to take a leap and search for it... Here is something on youtube i found.
http://www.youtube.com/watch?v=DtTDuc4V4cU
EVERYTHING you need is on XDA if you look for it...
Click to expand...
Click to collapse
no luck at all I tried it once and have succesfull rom update, but it stucks when started with HTC logo, i tried second time and still no luck. Please help me.. all the time now also for original rom it says that this room is not for that device

original rom
you have to find the original rom shipped with your phone like here i am tmobile usa roms you have to find your carrier and country and start with one of the first ones i started with my second one RUU_Leo_1_5_TMOUS_2.02.531.MASD_S__Radio_Signed_15.29.50.07U_2.06.50.04_TeleNav-5.5.42.zip and i kept getting stuck screens when it was hot turn it off maby find some silica gel (lil rocks that come with everything to absorb water) wrap it in plastic and throw it in the freezer does the back of the phone get real hot during flash

i have shipped original rom, still no luck

not the newest one
you need one of the first test roms this was the only way i got mine to work i had to go from 2.02 to 2.03 to 2.05 hard resetting after each install making sure they completely went in what carrier are you and where are you

Still stuck?
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.

stepthehen said:
Download HSPL 3.zip from page 1,
Run the program;
a) select 2.08.000 (not HSPL) and you can flash stock (HTC) ROM with no damage or aftermarket changes on your phone.
b) select 2.08.HSPL and you can flash whatever you want
Install MAGLDR 1.13
Flash ROM
Make sure you follow the instructions EXACTLY. You can find these all over XDA, look at all of my posts if you need to.
Click to expand...
Click to collapse
Hi, thanks a lot. Only, SPL for original rom was 1.42000 is it ok to flash with 2.08.000 ? And why i should install MAGLDR 1.3 ? Thanks in advance,

Ok, now i dont understand anything. My original SPL was 1.42, i did Hardspl 3, after that tried flash original rom, process stuck on 96%, after that i tried once again stuck on 9% and says rom not compatible with device. And its like a hidden circle, my phone is acting like that all the time. I tried task29, tried all HSPL, also 1.4200, 1.66 and so on. Can anybody help me? my skype nick is martins.prieditis , maybe someone can assist me?

Ok now its fixed. I did a HSPL4, due to which original rom freeze on 0%, but 3.14 didnt start up on loading OS (white screen with HTC logo))or freeze on 99%. Than went back to shipped 1.42, stock room succesfylly flashed and did a SSPL_RUU. Now the only problem is that my LEO restarts when it gets hot. Any ideas how to fix it?
Thanks all for youre help (regarding my previous issue) !

Overheating??
As mrpoe stated in post 9, One of his phone had to be put in the freezer to be able to flash anything otherwise it will get hot and freeze.
Also the motherboard is most likely broken and you cannot get it to work without freezing or it will keep rebooting...
The best thing to do if you still have warranty is to Keep stock SPL and stock WM6.5 and return for warranty.
It will not function the same again.

[Q] half broken, I think

Hi every one.
I've got a problem.
my hd2 T9193 works once a week for 1-5 houres maxmimum. (otherwise, it reboot it self for ever)
i can go to the bootloder
i can change the hspl
i can install just one rom called JNF_AndroidStarter_US_30-12-10 which work once a week as i siad.(when i connect to the pc it says HD2 T8585)
I cannot update the rom or the radio. always stop at some point
I've tried hard reset
I've tried task 29, task 28, task 2a
I've tried hspl 1.44,1.66,2.08,3.03 (both the offical and the jilbreken)
I've tried sd recovery with offiacl rom(00018003 error {LEOIMG.nbh -- FAIL}{RADIO_V2--RSA Fail}{/*ON BOTTOM*/ Update Terminate UPDATE FAIL}
I've tried most of the roms offical or cooked one
I've bought a new battrey
What I was doing before it crashs ?
I've tried all andriod roms (sd,nand,recovery mode)
I've tried wp7
I've tried all wm6.5
All of them where frezez when i run too many porgrams so i take the battrey out and insert it agin
so the last rom I've instaled correctley before the crash was the offical -HTC HD2-RUU_Leo_Telstra_WWE_1.72.841.0_Radio_CRC_Signed_15.32.50.07U_2.07.51.22_2_Ship , i think the radio is the same as the offical one in red
so What do you recommend ?

you have what is known as a 'stuck radio', and its a 51 radio so wont work with android/magldr/most cooked roms.
the current advice appears to be chill your phone in a sealed bag in teh fridge/freezer for a while, no sim, no sd, then when its nice and cool try flash telstra rom from sd card.
Ive never seen it done, but it seems to be the only advice anyone can give.
have a google on stuck radio radio rsa fail things like that.

Awesome, i will try it ^_^
do i but the battry with it ?

COOL
every thing is working know, i've changed the Radio to the lastest one 15.xxxxxx
there is one problem it frezes when i use more than half of the RAM.
thanks for helping mate

Can you elaborate on what you did exactly? Did you flash via USB or SD card? Did you end up putting your phone in the freezer? If so, for how long?
Thanks in advance and congrats on fixing your HD2!

That would be nice - same problem here

[Q] Task 29 problem

I'm sorry i know it's against the rules to be starting a new thread but it's been a week i've been asking for help and no one noticed. This is just a try to come noticed.
I installed task 29 on my blackstone. I had olinex 1.56 installed and later did the task29 with radio 1.13, 1.14 and 1.17 After successfully doing it i went on step 2 that is installing a clean rom. I tried these roms
blackSTONEhengeHyPerSlim_4_1
RUU_TOUCH_HD_MARYONE_23148_WWE_191110
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship(3)
They get installed but after i store the contacts and everything it gets stuck if kept for like half an hr. The screen doesn't respond but power button and the volume button works.
I took my phone to a repair center and they couldn't fix it. So please help me i've just got only one phone.
I don't mean to offend any moderators by this but i'm just asking for your help. Thank You

Try reinstalling stock ROM after Task 29.
Restore ONLY contacts, and then try using device for several days.
DO NOT install any other software!!!
If it works, then problem is in some data or software you're restoring.
If not, restore original SPL and original ROM and try again.
If it does not work... and service can not help you... then sorry...

Hello i did reinstall the stock rom after task 29 and i was using pimbackup for restoring but that freezed my phone so i installed the stock rom again and thought of not using it. Did that but nothing much helped.
I hope believe these are the correct shipped roms
WWE_1.56.405.1_Radio_52.62.25.Shipped ROm
RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.3 4_1.13.25.24_Ship(3)
Everything on xda has worked like wonders for me. Be it android on any other rom but right after task29 nothing seems to be working on my phone.
One thing i've noticed after installing any rom after task29 is if i get to the bootloader it gets me to a 1 sec white screen saying no image found. I hope what's causing a problem.

Do you understand WHAT Task 29 is?
It formats the partition drive of your device where the ROM resides. Meaning, it wipes any data regarding ROM.
So of course it would say "No image found".
I don't know which ROM is stock for your device. Try to update ROM via HTC site.
If lucky, it will suggest / let you find adequate ROM.
For my device it's 1.56.407.2 (German)!
If unlucky, it will say "Not supported" or something like that - then go for Orange 1.59.61.2 ROM.
And you might try one 1.5x ROM flash WITHOUT Task 29...

Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.

Thanks will do it and keep yu updated with it..

simplistian said:
Just try installing stock ROM by stock RUU with USB cable. It will format data for you so you do not need any task 29 before flashing. If it doesn't work, try NOT restoring your contacts.
Click to expand...
Click to collapse
Thanks i tried installing the stock rom like you told me but then got stuck on the screen alignment screen. I later installed blackSTONEhengeHyPerSlim_4_1 and now it's responding to every touch. Thanks alot. I hope this stays like this and yes instead of restoring i forwarded all the contacts through bluetooth. Owe you a BiiiiiiiiiiiiG thanks..

Too soon to be happy as same again..I don't think there should be a problem with touch as it works fine for first 1hr but right after something gets stored by something i mean contacts it stops reponding after sometime. The volume and power button work all fine. I can't make out the problem. Any ideas or suggestions. Shall i make a video and post ??

FIRST you have to make it work with factory settings - stock SPL and stock ROM.
After that flash what you like...

I think you have to follow Bodisson's suggestion, do everything as stock and retest without restoring anything. If it still failed...... you should have it repaired
Good luck!!

I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...

Bodisson said:
I had a very bad flash when I first tried Cloudy 0.7.
Unstable and freezing clock in TouchFLO (but NOT system clock!), crashing programs, very slow satelite lock with radio 1.17 on, sudden autolocking/unlocking...
So I did Task29, put on stock ROM (latest German 6.1), after that latest Orange to get newer radio, and after that Cloudy's 0.7.
Now I'm happy so far...
And I'll stick with radio 1.14 for now since it uses a bit less battery than 1.17...
Click to expand...
Click to collapse
Glad to see somebody researching things out and settling on a radio he prefers due to performance rather than those just going for latest

I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.

kulwant said:
I totally agree with spartan on this one. It's better to stick with old one's for performance rather than having problems with the latest one's. My device is working better than before but it does get stuck. I'm using stock rom with 6.1 and want to switch to 6.5 so looking for some compatible 6.5 rom with radio 1.14 maybe
Bodisson can you tell me all what you're using bro so that i can tr it on with my device.
Click to expand...
Click to collapse
All rom's should work with each radio to be honest. Glad your device is working better, though still a little baffled why you're still having difficulties
EDIT - You are on a wm6.1 rom. Is the rom based on 1.56+, if not you may need to revert to HSPL 1.14

I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers

kulwant said:
I know it got me bedazzled as well as i've flashed couple of times before but never faced any such difficulties. I even tried android on my phone and everything worked like charm. RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship is what i'm using at the moment. I did try to flash it again with a 6.5 version rom but still gets stuck. The phone does get stuck once in a while if it is kept unused for a while so don't exactly know how to go on about it.
P.S: I know how hard it is to control things as an admin as i myself run a group. Photography in my case. Cheers
Click to expand...
Click to collapse
I'm baffled but still want to get to the bottom of your issue and would appreciate any help from other members who may have idea's on how to solve your issue. From what I've read everything you have done is correct, but I don't like being stumped!!
If we start from the start, we may get to the bottom of this........

Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.

kulwant said:
Ok it all started when i tried installing task 29. I flashed my blackSTONEhengeHyPerSlim_4_1 rom thinking task 29 will work awesomely fast with some newer version as it'll get installed as the default rom.
My phone started freezing like anything right after i flashed it with task 29. Right now my device is running on 1.56.405.1(43972) WWE and 1.13.25.24 rom and freezes again once in a while.
Just waiting for some miracle to make it work fine again.
Click to expand...
Click to collapse
Well as you know a T29 formats device so you need to flash a rom or you'll be stuck at boot screen. Before you do a T29 it states you must have HSPL on your device first. Now from what I've read you did have HSPL on first and your T29 worked as you where stuck at boot screen afterwards.
I'm assuming you turned device off, booted into bootloader then flashed youir rom (blackSTONEhengeHyPerSlim_4_1) which is based on 1.56+ as was your HSPL.
This all seems correct so I'm not sure what went wrong.
Is above all correct?
Did you try a T29 again and flash different rom or did you just flash different rom over existing?

I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.

kulwant said:
I did task 29 on blackSTONEhengeHyPerSlim_4_1 and tried installing RUU_TOUCH_HD_MARYONE_23148_WWE_191110 in this process i started task 29 first and flashed it with radio 1.14 by placing the radio and task29 in same folder. Once done it got stuck with windows mobility. After that i restarted on bootloader once again and flashed it with RUU_TOUCH_HD_MARYONE_23148_WWE_191110 . It does get installed but then freezes on configuring device for first time use and then freezes big time on the screen for alignment. I had 1.56 installed before flashing with task 29. If the whole thing bypasses the align screen the rom will keep freezing big time.
That's been the whole issue.
Click to expand...
Click to collapse
Right, I never put any files in same folder as it only confuses flashing process and can cause issues. I.e. put T29 in its own folder, radio 1.14 in its own folder and then rom in another folder.
Do a T29 and when its complete, I.e. stuck in smart mobility screen. Then you take out battery to turn phone off. After this put phone into bootloader and flash rom. Then flash radio after it as a lot of roms have a radio file included
...........................
Sent from the improved version of Tapatalk, better known as Forum Runner

[Q] White Screen of Death [HELP]

I've been searching for over 20hours around the internet for any solution to the so dreadful White Screen of Death in HD2.
This is due to a Radio Rom incopatible with the device. May be called Radio Brick! Lol
Well, it's truly desperating, as no method tried works!
The phone as soon as it's turned on just shows a white screen, no letters, no nothing.
Happened when I - dumbly - flashed a incompatible radio rom...
It has happened to a lot of other good people, but no solutions yet arrived to the internet!!!
In my case, I have hspl 2.08, and can perfectly access to bootloader, but flashing anything through SD does NOT work.
WHAT I'VE TRIED:
-flashing stock rom from HTC site, but when it comes to the radio part... UPDATE FAILED!
-tried a method here in XDA that solved a case like this but nothing... when it comes to flashing the radio, it always fails
-tried downgrading HSPL to SPL or to another version of HSPL.. curiously, the process says it was sucessfull but it changes nothing.. when i go to bootloader again the version is the same, no matter what kind of version I select...weird!
-nothing flashed through RUU works because comunication fails after 5min at 0%
-task 29 - does nothing
-changing rom/radios - always gives an error in radio update
I'm really, really, REALLY desperate, and I believe i'm not the only one in this situation!
Does someone have a brilliant idea on this?
I got it working again a couple of times but then it starts freezing after 10 hours and then i get again the whitescreen..
Now its stuck at bootloader i can't get in magldrboatloader does some1 known how i get into magldr because than i can flash another rom because in boatloader i can't flash

Hello,
I also have same problem I also cannot find a solution, Hope somebody can help us.

try j-tagging your devices !!
also it may be a hardware issue !!
good luck !!

Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.

Brain in a Nutshell said:
Are you sure flashing through SD isn't working? Format the SD card new as FAT not as FAT32. And try to rename the the nbh file with into LEOIMG.NBH . Flash through a SD not a SDHC. Try this things, if they aren't working maybe j-tagging fix it.
Click to expand...
Click to collapse
Can you send some tutorials. Because i dont know were to start and how..

I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]

Slagers said:
I saw many people have this problem but there is no clear solution how they fixed it because they didnt gave feedback that it worked. Does some1 know how to fix this. [Desperate]
Click to expand...
Click to collapse
you'll have to try flashing your device again and again !?
but i think j tagging is the best option for this problem !! !!
you can go to the original htc store if you have not flashed hspl !!
(flashing hspl voids warranty !) !! also try to stock spl to 1.42.0000 by using hspl2 !!! http://forum.xda-developers.com/showthread.php?t=611433
if the bootloader screen (the three color screen) show 1.42.0000 spl then u can show it to the official htc stores !!
else
contact a local repair shop and try to jtag !!
may help !!
good luck !! !

So there is no fix i can do at home like flashing a specific rom or something else?

if the bootloader screen (the three color screen) show 1.42.0000 spl
Click to expand...
Click to collapse
Or 1.66.0000 or 3.03.0000

The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.

SPL-2.08. HSPL
I can flash it back to the normal rom from windows mobile. But i want a android version maybe some1 know a good rom and radio thats stays good?

nemuro said:
The best thing you can do is update the kernel version. I haven't had a WSOD for more than half of year.
The only kernel I've had this problem with was a rafpigna kernel on a sense rom. It was a build made in the first trimester of this year.
Click to expand...
Click to collapse
What kernel version you use now? and what rom and radio? So i can do the same things you did.
Can you put the link were you downloaded the kernel and rom and radio please. Thanks in advance nemuro!

You have all information in his signature.
Radio 2.12.50.02.2
ROM Redux2
Kernel Tytung (Redux2 have Tytung 12.4 by default)

how about hardware reset with pressing 3 keys at the same time?

Let me explain whats happing me all the time:
First my phone freezed up all the time and after a couple of weeks I got the [wsod] I can boot into bootloader (3 color screen) there I can flash it back to the original stock (WiMo6.5)
But I want android for my whatsapp and I like android. So I put maglder 1.13 on my phone. Then I tried android NAND flashing this worked but afther 10 hours my phone is off and I got the [wsod] again. I flashed my radio first to 2.15 but didnt help I tried this 2 times.
Yesterday I flashed my hd2 I followed a guide for android sd flashing I put the radio 2.12 on my phone and a old rom. I flashed it with haregt.exe it worked for 10 hours again then boom [wsod]
Im realy desperate, have some1 fixed this problem by himself already?

Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14

Petricanu said:
Did you try to run winmo for a few days? If you have problems even with stock OS most probably is hardware issue. If everything is OK running winmo then try fresh install (task29, radio, magldr, predefined recovery,ROM) of this ROM:
http://forum.xda-developers.com/showthread.php?t=1395049
For me works perfect.HD2 EU Radio 2.15.50.14
Click to expand...
Click to collapse
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.

Slagers said:
Oke im trying stock rom for a few days, I keep this thread updated if it worked or failed.
Click to expand...
Click to collapse
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?

Taco123 said:
So, it means WINMOB is working all days ok?
If no, what is the issues with WINMOB?
Click to expand...
Click to collapse
No I cant install WinMo anymore still white screen of death if im back from work Im gona try to install WinMo again on my HD2 hopefully this time with more luck

I go into bootloader than install a stock rom from htc site than installed till 100% than I get an error that the image file is incorrupt?
Any ideas?