Related
so after getting my blue led light after i did a bad flash of a mod update zip when i didnt have a rom flashed first...i was told to replace my trackball instead i ...
opened my htc magic and removed my trackball and disconnected the ribon to it let it sit for 30 seconds then put it back together i guess it resets hardware but it worked like a charm
tried ur methode on my bricked magic ... no luck
did u have the blue led with no hboot or recovery ...make sure ur battery is charge some
thatruth132 said:
so after getting my blue led light after i did a bad flash of a mod update zip when i didnt have a rom flashed first...i was told to replace my trackball instead i ...
opened my htc magic and removed my trackball and disconnected the ribon to it let it sit for 30 seconds then put it back together i guess it resets hardware but it worked like a charm
Click to expand...
Click to collapse
I can't understant why doing that the device has unbricked, I probably must do the same.
anyone else tried?
is this really working???
can anyone other than the OP confirm this works? what showed up on the screen when it was bricked? Did it have the 'arrow coming out of the box' symbol, when the phone was switched on?
i did nt get big arrow or anything my phone wouldnt boot period all i kept getting was a blue light no fastboot or adb would work until i did this the only reason i tried it was because someone mentioned to me to replace the track ball i dont know why but it worked
Did you happen to remove the little battery when you did this?
no i only disconnected the cable leading to track ball the if u look where the track ball is you can pry and pop out the track ball i did it just to look around in there ...i am not a tech but i do have a basic understanding of somethings and i think for some reason in my situation it may have reset something i really dont know but my phone was a brick for half a day with me trying to use google as my friend typing away at fastboot and adb commands only to get nothing ..but when one person told me i may need a new track ball i just decided to look inside on how that a bad flash would effect the track ball but i did what i did and i am back using my phone but i did notice one thing today i had put my phone in fastboot and the normally when it loads those command or whatever about loading img. ...its now saying no image
Thanks, I will try this. Unfortunately I gave away my battery and cable... I still have doubts about this helping me, as I flashed the wrong radio. Where as you just flashed a bad update.
did u use a 32b radio
thatruth132 said:
did u use a 32b radio
Click to expand...
Click to collapse
hi,
quick question. my friend rooted the phone and then flashed hardSPL but i think it was the wrong one. the last thing we saw was a box with a arrow on it and the phone has been dead ever since.
was this the same for you ? we would love to be able to unbrick his phone.
brick
hi,
i have a 32b magic, and since yesterday it just doesn't startup anymore.
i just get a black screen, with backlight on. (also no adb/fb/recovery)
if i hold trackball while power on, i get the blue led
i've searched, but haven't found any similar problem, cause i don't get that box with an arrow.
to unbrick this, you just disconnected the trackball?
pls be more specific
HEEEELLPPP!
fakecaker said:
i just get a black screen, with backlight on. (also no adb/fb/recovery)
Click to expand...
Click to collapse
Sounds like you erased or flashed an invalid SPL (usually people brick into boot mode 3 where the radio + SPL works but is forcing the boot of a broken recovery image) Thus the user becomes stuck at the splash screen.
Regardless if blue light mode woks and nothing else will boot [and you are not stuck in blue light mode]:
the only option at this point in time is using JTAG to force an engineering SPL to load.. then use that to fix the rest of the phone.
http://forum.xda-developers.com/showthread.php?t=668246
http://forum.xda-developers.com/showthread.php?p=6100287&highlight=radata#post6100287
The OP likely had a stuck trackball.
Holding the trackball when you power on puts you in the blue-led mode and doesn't let you do anything else. Being in blue-led mode doesn't mean you are bricked, it's just a mode in which the phone can start up. If the op's trackball got "stuck", it would explain his problem. Replacing the faulty trackball likely is what solved his problem.
It would be nice if the OP could update the first entry to reflect as much.
If your phone isn't voluntarily going into blue-led mode on it's own, this "fix" likely won't do anything for you. You still have a brick... like me
ezterry said:
Sounds like you erased or flashed an invalid SPL (usually people brick into boot mode 3 where the radio + SPL works but is forcing the boot of a broken recovery image) Thus the user becomes stuck at the splash screen.
Regardless if blue light mode woks and nothing else will boot [and you are not stuck in blue light mode]:
the only option at this point in time is using JTAG to force an engineering SPL to load.. then use that to fix the rest of the phone.
http://forum.xda-developers.com/showthread.php?t=668246
http://forum.xda-developers.com/showthread.php?p=6100287&highlight=radata#post6100287
Click to expand...
Click to collapse
hi terry ...
quick question.
the jtag de-bricking that everyone is mentioning is said to work with g1/dream/g2 ... is this also possible with the magic(sapphire) 32A ?
like i said my friend bricked his loading hardSPL and the phone is charging and i can get into the blue led mode no problem.
if it is possible would the pinouts be the same or similar for the magic? i am quite keen to give it a bash if i can be pointed in the right direction.
thanx in advance.
Thank for you response
but i didn't flash any new spl or something else.
i had my phone working fine with spl/radio/rom.
but then i shut down, and after that i couldn't power up
i reboot my working magic with froyo and then is dead.
its keeps rebooting and no fastboot or recovery mode only if i press trackball and on the phone i got blue led, any solutions ???
Regards Sn00py
But what exactly was the problem, when you turned it on it automatically turned the blue led or did that happen when you pressed the trackball+power? im going to try to debrick my magic now but must it be on with the blue led or off?
ale922 said:
But what exactly was the problem, when you turned it on it automatically turned the blue led or did that happen when you pressed the trackball+power? im going to try to debrick my magic now but must it be on with the blue led or off?
Click to expand...
Click to collapse
Who are you asking, the OP? They just had a stuck trackball, so they couldn't boot normally.
It doesn't matter, just continue.
help i9000 after flash, doing loop of at&t logo, can not enter download mode,
when plugged in screen goes black.
!! if anyone can help please do not hesitate, mostly appreciated.
Try to hold the Down+Menu+Power combination while INSERTING the battery into the device.
i try that seem to have no response and when unplugged from usb it loop at&t logo
or plugged in usb screen goes black and no response seem from pressing buttons
I had a similar problem as most phones in Canada seem to have Download/Recovery mode disabled, and here is what worked for me.
Grab something like One Click Un Root (all models), and click one click un root (obviously phone has to be on and plugged into the computer).
This should automatically reboot you into Recovery Mode!
All you have to do is "wipe data/factory default" or something like that (should be the third option).
As it states, you will loose all your data, but at least you will have a functionning phone!
did it work?
Hi. I have similar problem. Can anybody give instruction what can I do?
I have this problem too. Please help somebody
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. ****[email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
This is not working. Probably because the phone is not in USB debugging mode as I can't change it... Is there any other way to get the phone into recovery mode?
**** me
i had the same thing happen to me the other day with my bell galaxy s and my phone wont do the 3 button combo trick. i left my phone plugged in to a wall charger for a while until the back of the phone became a little warm. i pulled the battery and then left the power cord plugged in and put the battery back in. i held the volume down and enter button until the battery charging indicator showed up, then i also pressed and held the power button until the boot animation started (this is the blue moving swirl and music, not the galaxy s splash scree) and then i let go of the power button. it took a few attempts at this before it actually worked, but eventually it will go into download mode at which time you can open the odin app, then plug in the usb cable and flash your phone that way. it did seem to make a difference if the back of the phone (around the camera area) was warm. if i let go of the power button while the music was playing and the phone did not enter download mode i would keep all 3 buttons pressed until it shut down again, then i would only let go of the power button while the phone initiated the charging screen, then once the battery logo was displayed i would hold the 3 buttons again and would just keep doing this until it went into download mode. i have flashed it at least 5 times today and i have been able to do this each time.
i also had an issue where odin would not recognize my phone was plugged in and windows would show a message saying the usb device was not recognized. i left the phone plugged in and while in download mode i pressed the volume up, enter button and power button until the phone went blank and when the galaxy s logo showed up i let go of the power button and the phone would go into recovery mode and then the usb drivers would be installed. i would then do the 3 button combo for download mode and odin would work fine. it took several attempts but it does work. i hope this helps you guys
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
xZeDgEx said:
If I hold all three buttons the splash screen does not come on, it just keeps looping the Galaxy S logo until I let go of the power button....
Click to expand...
Click to collapse
That's what mine did too, several times in a row and then it worked. For some reason it only works after the battery is charging for a bit and the back becomes warm. then it works at will
No luck. I am probably screwed getting it exchanged now too as I am passed the 14 days from Best Buy.
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
xZeDgEx said:
Add me to the list. Bell Galaxy S, went to unlock my phone the screen went black. Now it will not boot into the OS, the galaxy S splash screen displays then nothing. The menu and back button light up, thats all. [email protected]@
I have not rooted or anything.
Of course my download mode does not work.. Going to try this one click root thing if I can find it.
NOT HAPPY
Click to expand...
Click to collapse
AllGamer said:
the on click thing doesn't work, if your phone is already bricked.
also it is not the phone's fault for not working, the phone was working properly before you tried the hacks.
whenever you do these kind of things you know you are entering into the "not supported" "not covered by warranty" zone.
in the worse case scenario, if you can no enter download mode to recover your phone, it'll be to take the phone back to bell and claim warranty on it, and prentent you don't know what happened to it.
Click to expand...
Click to collapse
Its my fault??
I did not hack my phone. Its not rooted, I did nothing to it.
By "unlock" I meant exactly that, unlock as in swiping the screen to unlock it.
The more I search the net the more posts I find of Galaxy S phones randomly bricking...
on the original message sounded more like you went to Unlock the phone, as in SIM unlock the phone using any of the tools available out there, and there has been already several people which had the same problem.
if you go back to Bell for an exchange, you better not use the word "unlock" rather use Swipe
as the message on the phone "swipe the screen to unlock"
there are no known issue about this causing the phone to brick.
if that is what happened to you, you should have started a new topic for people to help you, instead of hijacking the topic from the OP, as your issue is different from OP, the OP actually screwed up because he/she flashed the wrong ROM to the i9000
... anyways, Does it work if you reboot the phone?
I have rebooted the phone about 100 times. The phone crashed when I unlocked it to check a text I received. (not hacked). Has not booted up properly since. I have found many others with the same issue who have also not hacked/rooted/unlocked/ their phones.
Waiting on Best Buy to call me back. I am so pissed right now, I have been bragging to my friends and co-workers how awesome this phone is, one has already picked one up, I hope his doesn't brick too. Not recommending it to anyone anymore..
did you load a lot of MP3 to the phone?
can you boot into Recovery Mode?
in the recovery mode you can wipe the Cache and wipe the data
that should make your phone work normal again
it'll be best to open a topic to help you trouble shoot your interesting issue, as it's the first i've hear that you get a black screen after Swiping out of the lock screen
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
xZeDgEx said:
I can't get into recovery mode. I have tried every button combination I have found. I had about 2 GB of music on the phone. I also installed the Android SDK to try ADB, but since the phone is not in USB debugging mode it does not see it.
Click to expand...
Click to collapse
on the other topics relating to the 3 button not working.
have you tried the heating up method?
or the plugging the battery in, when all 3 buttons are pressed? (of course for this one you will need help from a friend, unless you are very skilled at keeping the 3 button on hold meanwhile able to slide in the battery in with out a 3rd hand)
Hi My boss has a droid x and it stopped booting. He already got his replacement but he did not back his info up to google so he lost everything. The phone is completely stock. He said that first it gave him the black screen with the yellow triangle and the android then it would not boot. I know the software is partially working because when I plugged it in to the charger the battery animation comes up. When I plugged it into the pc I tried different button combos because I do not know how to get into recovery mode. So I think when I hit vol up and power I got a screen that said bootloader and power low and cannot configure software or something like that. Oh the screen was black and the letters were white. I am not familiar with this phone or motorolla in general I have and lg and a Samsung and both have unlocked bootloaders. So is there a way to get his info off this phone? The only thing I can think of is to some how install CWM and then mount the internal sdcard but I don't know how to do that with a locked bootloader. So if anyone knows anything please let me know.
Thank you,
Charlie
The black screen with the yellow triangle just means your in recovery mode. If it still goes to that when you turn it on just press both volume buttons and it will give you options. There's an option to reboot and you can factory reset. But I don't know if you can get the data.
Also to get into recovery just press home and power and when you see the m for Motorola release power and keep home held.
Sent from my DROIDX using Tapatalk 2
Hello i have recently tried to return my phone from cyanogenmod into the stock rom using this thread: "https://forum.xda-developers.com/moto-x-style/general/guide-return-to-stock-relock-bootloader-t3489110" and my phone got stuck in the process while making the command "fastboot flash bootloader bootloader.img". And now my device is stuck on boot loop showing the cyanogenmod loading screen.
Anyway now i found a way to get to stock but for that i need to get my device into fastboot. THE PROBLEM IS that my device can't get now into fastboot! i have tried using adb commands but the adb doesn't recognize the device. I have tried fastboot commands but again it doesn't recognize the device. I also tried button combinations, but it didn't work.
Until the incidence i have used to press the power button+ vol down keys to get into fastboot mode, but now it doesn't work. I suspect that it doesn't work since in order to get into fastboot with the button combination i need to first get the device turned off. But when i connect my device to the charger it shows the battery charging screen and the device is stuck on that screen even if it has disconnected from the charger, and it will keep on that screen until the battery has depleted. I have tried shutting it down using the power button but then my phone gets into a loop with the cyanogenmod loading screen, and even if i turn it off it restarts instead.
p.s I have used to think that my fastboot was deleted but on an other thread i have been told that as long as i see the cyanogenmod loading screen of the OS that means i have a boot-loader.
Please help!
I want to get into Fastboot on my Moto Pure.
Thanks a lot
Eden.
Power down 1st
Try volume down & power key together. That will get you into fastboot directly.
Oops just seen that, my bad, I wont respond anymore.
Sent from my Portable
PassatSport15 said:
Power down 1st
Try volume down & power key together. That will get you into fastboot directly.
Oops just seen that, my bad, I wont respond anymore.
Sent from my Portable
Click to expand...
Click to collapse
Haha, as said. can't power off.
Np thanks for responding!
Anyone got an idea?
u cant poweroff does that means your phone is continuously bootlooping or its just booting but takes a hell lotta time to boot up?
Sagar_1401 said:
u cant poweroff does that means your phone is continuously bootlooping or its just booting but takes a hell lotta time to boot up?
Click to expand...
Click to collapse
I think @edenah is saying it just gets stuck at the loading screen. If the battery discharges all the way and the device is plugged in, the battery symbol shows and after the charger is unplugged, the battery charging doesn't go away until the battery dies again or the power button is pressed (which leaves us right back to where we started)
edenah said:
Hello i have recently tried to return my phone from cyanogenmod into the stock rom using this thread: "https://forum.xda-developers.com/moto-x-style/general/guide-return-to-stock-relock-bootloader-t3489110" and my phone got stuck in the process while making the command "fastboot flash bootloader bootloader.img". And now my device is stuck on boot loop showing the cyanogenmod loading screen.
Anyway now i found a way to get to stock but for that i need to get my device into fastboot. THE PROBLEM IS that my device can't get now into fastboot! i have tried using adb commands but the adb doesn't recognize the device. I have tried fastboot commands but again it doesn't recognize the device. I also tried button combinations, but it didn't work.
Until the incidence i have used to press the power button+ vol down keys to get into fastboot mode, but now it doesn't work. I suspect that it doesn't work since in order to get into fastboot with the button combination i need to first get the device turned off. But when i connect my device to the charger it shows the battery charging screen and the device is stuck on that screen even if it has disconnected from the charger, and it will keep on that screen until the battery has depleted. I have tried shutting it down using the power button but then my phone gets into a loop with the cyanogenmod loading screen, and even if i turn it off it restarts instead.
Click to expand...
Click to collapse
Try this:
Hold power button for 10-20 sek, when screen will turn off hold only vol-(at bootloop screen).
You should flash stock without "oem" commands.
Find how to update bootloader.
aybarrap1 said:
I think @edenah is saying it just gets stuck at the loading screen. If the battery discharges all the way and the device is plugged in, the battery symbol shows and after the charger is unplugged, the battery charging doesn't go away until the battery dies again or the power button is pressed (which leaves us right back to where we started)
Click to expand...
Click to collapse
Yes thats exactly what i mean.
dzidexx said:
Try this:
Hold power button for 10-20 sek, when screen will turn off hold only vol-(at bootloop screen).
You should flash stock without "oem" commands.
Find how to update bootloader.
Click to expand...
Click to collapse
tried this, but the device still goes into the cyanogenmod loading screen.
its soft brick but can't be fixed (just thinking any method but no idea man)
get your phone to moto service centre and they can only fix it (or maybe not) caus this is worst case happening to you
if any pro dev read this thread he might be able to answer but badluck (nobody gives a ....)
btw when you connect your phone to pc does it shows unknown device or it just charge the phone?
Sagar_1401 said:
its soft brick but can't be fixed (just thinking any method but no idea man)
get your phone to moto service centre and they can only fix it (or maybe not) caus this is worst case happening to you
if any pro dev read this thread he might be able to answer but badluck (nobody gives a ....)
btw when you connect your phone to pc does it shows unknown device or it just charge the phone?
Click to expand...
Click to collapse
:/
It recognizes it as portable usb device.
And well. I have bought the device in the us but i live outside of the US. so its bit problematic to return it now. Some help could do the trick!
I found SP flash tool and i believe it would do the trick. But i need to get the scatter loading file of the moto pure, but i can't find it anywhere, maybe anyone got the idea how to get that?
edenah said:
:/
It recognizes it as portable usb device.
And well. I have bought the device in the us but i live outside of the US. so its bit problematic to return it now. Some help could do the trick!
I found SP flash tool and i believe it would do the trick. But i need to get the scatter loading file of the moto pure, but i can't find it anywhere, maybe anyone got the idea how to get that?
Click to expand...
Click to collapse
We haven't been able to get the QLoad files for most Moto devices, at least not for the last 2-3 years... Sorry.
Well i have found a way to get the device charged while the screen is off!
If i connect it to my computer while pressing the power button and the vol down button and keep pressing it, the device stays turned off!
Now i'm trying to play with it, to turn the bootloader. so far the classical power and vol combo doesn't work.
edenah said:
Well i have found a way to get the device charged while the screen is off!
If i connect it to my computer while pressing the power button and the vol down button and keep pressing it, the device stays turned off!
Now i'm trying to play with it, to turn the bootloader. so far the classical power and vol combo doesn't work.
Click to expand...
Click to collapse
I am stuck. No button combination works. I suspect that the device isn't really off but the display is just closed. As even to open up the device takes a reallly long press on the power button.
if it got interrupted while flashing bootloader, you're pretty much not going to be able to do anything.
motorola service center is likely the only place that can fix it.
sorry for your luck.
edenah said:
Haha, as said. can't power off.
Np thanks for responding!
Anyone got an idea?
Click to expand...
Click to collapse
ericpeacock79 said:
if it got interrupted while flashing bootloader, you're pretty much not going to be able to do anything.
motorola service center is likely the only place that can fix it.
sorry for your luck.
Click to expand...
Click to collapse
exactly that's what I'm saying but he needs to get his phone to USA as he specified..
only a specialist can help ya
Sagar_1401 said:
exactly that's what I'm saying but he needs to get his phone to USA as he specified..
only a specialist can help ya
Click to expand...
Click to collapse
i see :'(
Ok Thank your guys
I guess its a lost cause.
edenah said:
i see :'(
Ok Thank your guys
I guess its a lost cause.
Click to expand...
Click to collapse
Lost cause? No, probably not... Do you know anyone in the US you trust well enough to receive the phone from repair and ship it to you where ever you are? I believe that is all you need. The US service center cannot ship outside of North America (maybe US), but they can receive packages from anywhere. If you had a US contact that could receive the device and forward it on to you it might be worth it to get it fixed if it is still under warranty, if it isn't, then it might not be worth fixing. Lots of things to consider here.
My screen broke 6 months ago, so it wasn't used/charged for 6 months. Now I've replaced the screen, but it won't start up anymore. First thing I saw was the warning "low battery", so I charged it for a while. Still, nothing. Charged it for several days, nothing. Checked the battery voltage, 3.80 volts, exactly what it should be I think?
The phone does do something though. When I hold the "on" button, after 5 seconds it buzzes and the screen shows the oneplus logo and android. Just for two seconds, then nothing. Same thing with "on" and volume down, the start-up screen for 2 seconds...
When I use "on" and volume up, I get the screen saying "fastboot mode". And that doesn't go away untill I press "on" for a while.
I can connect it to my laptop, but cant see it. But when I take the battery out while connected to the laptop, the phone will show the "low battery" warning. Connect the battery again, and the logo and android message come on for two seconds...nothing more.
So the screen works, the battery is charged, but no way to turn it on. Tried holding the "on" button for 15 seconds, same result. Just a 2 seconds oneplus logo visible...
I have no clue what this could be, I hope its not completely fubar...
Thanks in advance, Fred Doe
Hey Fred Doe,
I wouldn't like to hijack your post, but I seem to have run into the exact same issue here.
A friend of mine got his screen replaced, and the phone acts exactly the same as yours.
I have disassembled the phone and checked all connections, but everything seems to be correct on the inside.
The phone does seem to boot, and it does boot into recovery mode (it responds to the button presses by vibrating) but the screen just doesn't show anything.
Only when doing fastboot the screen stays on.
Hopefully someone here can point us in the right direction.
there's not much to hijack here...sure sounds like the same problem. At this moment I gave up, guess its a lost cause..
Guys, the exactly same thing here. I've tried to unbrick it but failed.... So far what I know is that bootloader is locked.
I would like to know what steps should us do in order unlock bootloader, get screen functioning while getting access back to bootloder (TWRP) so after that we can install a new ROM!
Any clue from the community of OnePlus 2? This phone is still a good phone! Thnx
Have you guys tried running the msm tool. It'll restore everything to stock if you can it to work. If either of you have magisk installed it can cause issues with charging while the phone is off I believe.
I mean honestly sounds more like hardware issue that a msm wouldn't fix, but it's weird that your screen works in fastboot.
If you do the msm tool though be aware it will wipe everything on your device, and relock the bootloader if it is unlocked.
Like I said doubt it will help, but just a thought.
Edit: Also make sure you use the correct one for your device.
Edit sorry guys wrong forum ignore everything I said. Apparently xda labs thought my OP6T was a OP2.
Sent from my ONEPLUS A6013 using XDA Labs
@TheLogicalGamer
no problem. Thnx anyway. I'm still locked with my OP2.
dajosova said:
@TheLogicalGamer
no problem. Thnx anyway. I'm still locked with my OP2.
Click to expand...
Click to collapse
But the screen does show up & stays on in fastboot?
I'm no expert but any stretch. I just jumped ship from lg my 6t is the 1st OP phone I've owned. But if the screen does work normally in fastboot then it wouldn't be illogical to entertain the idea that it was a software issue. So I mean this is a bit of a chin scratcher.
Sent from my ONEPLUS A6013 using XDA Labs
Thanks for replying.
IWhen I press Power + Vol. Up it shoes Fast Boot screen. Then I connect cable and sometimes I can use command line but can't unlock bootloader with command line. All methods found indicate to use Recovery but since my screen doesn't work on Recovery I'm stuck.
When I press Power + Vol. Down (for entering Recovery) screen it goes all black but the capacitive buttons and Volume button give back a vibration response, as if it have entered Recovery Mode but since I can't see nothing on screen I can do anything either.
My bootloader is locked because I see that info via command line.
Thanks anyway
PS: I think something is corrupted. My OP2 was unlocked much time ago. I frquently change ROM's and have also updated TWRP. The only thing I did was disassembling the phone in order to change a shattered screen glass.
I've also tried different methods and installed in my pc different Qualcomm drivers, ADB, etc.
I'm getting close to the point of testing with broken touch, buying a new touch screen but with frame or giving up completely and buy a new phone :|
The last option get me in doubt because I would like a phone wich is good and fast and decent battery but not with a premium price... and popular so I can unlock it without hassle in order to install root apk's.