where and how is root.zip saved on linux bootcd system - HTC Aria General

have a new system with kubuntu linux 10, bootcd only.
where and how is root.zip saved since nothing is installed and linux runs from cd ?
what program is used on a bootcd system to open it? since nothing is installed, how is the file saved?
as trying to follow steps in http://forum.xda-developers.com/showthread.php?t=714250

A live cd runs as if it were a fully installed operating system, the only difference is that it runs from the cd. As for the files you need they can be downloaded from the the two posts. "How to root the Aria" and the " Liberated Aria" thread.
Sent from my HTC Liberty using XDA App

I Know the files, I do NOT know how they are opened on a bootcd system with no drives
where is root,zip saved? how is root.zip opened?

Most modern LiveCDs allow you to read files from a USB drive. So, you could put the files on the key in windows and then have access to them after booting from a LiveCD.

Related

Android Commander.

I just want to give props to a program for windows called Android Commander. I am not sure if its been mentioned on the Vibrant forum yet, but it got me out of a major jam today.
Android Commander is basically ADB with an easy to use interface. It lets you pull and push files to and from your pc to your Android device.
Story:
I tried to MM the Androdena theme but it seems the framework was corrupted and caused me to keep me in a forceclose loop not letting mount or boot or really do anything. I did make a nandroid backup but some how deleted the CW update zip from my sd at an earlier date and could only boot up into the stock recovery. I was ok with having to reflash the stock rom using Odin, but needed some important pictures that I took for work. Needless to say I starting freaking out. I have ADB set up but only know a few basic commands and I'm sure what I needed to be done could have been done from there. I started searching for solutions on Google and found this awesome program.
I was first able to move the picture folder from my sd card to my pc, then move and rename the CW update.zip to root of the sd card in turn letting me boot into CW recovery and restoring my nandroid.
The only thing I needed to do was to make sure my device was online through ADB and Android Commander was able to find the device and show me all my files and such. Its a great program, and I highly recommend it if you are not familiar with ADB.
I will need to check this out when I get home. I want an easy way to remove the bloatware on my phone.
it seems like an interesting program, and would be good, but for me it doesn't show that i have root. it tells me "root no" and when i use the console in it and use the su command it tells me no. but still a good program over all, i did some looking around and i believe it will only show you have root access if you have an APP2SD installed. i might be wrong with that, but atleast if anyone else has the same trouble with it please let me know if you figure a work around.
ps, you can view root files and folders just not push or pull anything from them.
Yep, I am seeing the same thing.
I did some research on Google and this is what I came up with:
"adb remount and adb root are protected commands and need either a rooted kernel or a flashed recovery model to run" - Source: Rastaman-FB
ah I see. That's good to know. I guess ill be sticking with just the normal ADB. But I think the program will still be very useful for other stuff considering we don't have to mount the USB so no rescan media after the unmount. That alone is a keeper for me. Thanks again for the information pal.
Sent from my SGH-T959 using XDA App
I must say
I have been using android commander since his 1st beta on all my android rooted phone..
It is the best android tool Out there.
Im usually private about the tools I use but
Android Commander (By PanPiotr) is the best and easiest adb GUI tools out there.
Features
Explore files:
- copy multiple files/dirs between Phone and PC
- copy multiple files/dirs between Phone folders
- delete multiple files/dirs from Phone
- new dir and rename options
- drag&drop multiple files/dirs in to progrm
- drag&drop files/dirs between program tabs
- partitions size info
- bookmarks
Manage apps:
- windows integration
- backup multiple apps to any dir on Phone/PC
- batch/single apps install
- install as private
- update
- batch/single uinstall apps
- uninstall with option to keep data or not
Console:
- type any shell command
- run sh script from PC
and more…
- flashing zip and img files
- options to reboot, reboot to recovery, reboot to bootloader, power off phone
- screenshots (beta)
Stupid question. I accidently deleted my update.zip file and I attempted to reflash another rom. Of course now I'm stuck at the Vibrant Logo and tried to use this app. It says its trying to connect, but never does. I have SDK installed, but I think its the version from when I was tinkering with the G1.
I got into Download mode with the BIG yellow triangle, but my PC never seems to show anything connected via USB unless I try connecting via Recovery.
This app sounded like something would help me since I'm not very good at ADB, but I guess I'm having issues getting over the first hurtle is seems. LOL
Qverse said:
I have been using android commander since his 1st beta on all my android rooted phone..
It is the best android tool Out there.
Im usually private about the tools I use but
Android Commander (By PanPiotr) is the best and easiest adb GUI tools out there.
Features
Explore files:
- copy multiple files/dirs between Phone and PC
- copy multiple files/dirs between Phone folders
- delete multiple files/dirs from Phone
- new dir and rename options
- drag&drop multiple files/dirs in to progrm
- drag&drop files/dirs between program tabs
- partitions size info
- bookmarks
Manage apps:
- windows integration
- backup multiple apps to any dir on Phone/PC
- batch/single apps install
- install as private
- update
- batch/single uinstall apps
- uninstall with option to keep data or not
Console:
- type any shell command
- run sh script from PC
and more…
- flashing zip and img files
- options to reboot, reboot to recovery, reboot to bootloader, power off phone
- screenshots (beta)
Click to expand...
Click to collapse
I'd say it's ok at best. I don't know of any other ADB GUI tools but this one doesn't work well with my Vibrant.
StrayPanda said:
I'd say it's ok at best. I don't know of any other ADB GUI tools but this one doesn't work well with my Vibrant.
Click to expand...
Click to collapse
I'm going to have to agree with this. Is nice to have but doesn't play nice with the vibrant.
Sent from my SGH-T959 using XDA App
It sometimes is very slow in reading internal sd memory on samsung vibrant and it loads up as a blank screen. Disconnecting usb cable and refreshing does the trick for me.
Sent from my SGH-T959 using XDA App

[STICKY][ROM] nvflash FULL restore, using bekit's original image (Instructions)

MANY THANKS TO REV FOR RE-WRITING THIS FOR ME!
(Post was updated on 3/23/2011)
=======================================
This post is to provide a template for using NVFlash to restore/recover your G-Tablet after suffering some kind of malfunction. Specifically, this document tries to provide ALL the information you need to use the NVFlash tool to recover the bekit 1105 software version, which has been found to be safe as a starting point for rebuilding your tablet after having a problem. This post does not include other methods of setting up NVFlash (such as installing the SDK, etc.) because this method is proven and can be easily supported.
I use Ubuntu Linux and know that the Linux instructions below are correct. Others have written Windows instructions and those too have been checked carefully and have been used before successfully.
A WARNING IN ADVANCE: NVFlash makes changes to the partition structure of your device. You should tread carefully and understand the risks. (MOD EDIT Note: It also has been noted a bunch of times that even NVFlashing your G-Tablet will not completely overwrite everything on it.)
The NVFlash setup process begins with a visit to:
http://db.tt/Wm25t7U
(Note: Sometime this DropBox is cranky. If you have trouble with it, check back later.)
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Note: The above "nvflash_gtablet_2010110500" is commonly referred to as bekit version 1105 in many posts relating to nvflashing (especially my posts).
-------------------------------------------
Installation
First, create a folder named "NVFlash" on your PC to put the needed files into and to work from. (Note: You can call it something else if you want to; we're just using "NVFlash" to keep all of us on the same page.)
Next, extract the files you downloaded from the DropBox above into the "NVFlash" directory. The files with linux and windows in the middle of then are the files for setting up NVFlash. (The are taken from the SDK and do not install the whole SDK -- just a simple, operable NVFlash for us to use here.) The files with gTablet in the middle contains the .img files with the software to go on your G-Tablet.
Third, for Windows users, you'll need to have an APX-specific USB driver for the next steps. (The Windows package bekit supplied has an .inf file in it, but the actual drivers are not there). For Linux users, you don't need an extra driver.
One source for the Windows drivers is at
http://www.myadventvega.co.uk/
Find the "Downloads" tab in the middle of the page and click on "USB System Driver" to get the files. Extract them and go down two levels to the "USB" folder -- and move that into your "NVFlash" directory. The USB folder has the .inf file for installation in it along with two other directories with drivers for the various operating systems. (Note: These drivers, which are the same as the drivers in the SDK, are proven to work with Win 7 64-bit and have the setup include to load into other versions of Windows.) Follow this narrative for actual installation of the drivers.
CHECKPOINT: At this point, you should have the nvflash files, .img files, and USB directory (and files) in you "NVFlash" directory and are ready to begin the recovery process.
Now, you will need to boot into G-Tablet APX mode: hold down the power and volume - button simultaneousl until your G-Tab comes up and the goes back to a black screen. The black screen means it is in APX mode and it is waiting to display the flashing process. In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Connect your G-Tablet to your PC using your miniUSB to USB cable that came with your tablet.
Linux users: At this point, open up a command window to the folder you created, and run this script:
./nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically. If the script does not work, make sure that the shell script and nvflash binary are set as executables.
Windows users: When you connect to the PC, the PC immediately tries to load a driver -- but since it doesn't know where the USB driver files are it will fail. Click through Start/Control Panel/Device Manager and find "APX" listed in the devices with a yellow "!" (exclamation point) on the icon. Select the APX item and find the "Update Driver" button and click it. When it asks where to search, choose the local computer manual selection choice and tell it to Browse.
Point the Browse (and the USB install) at the "USB" directory under the "NVFlash" folder. When pointed at the "USB" directory, the driver installed and I was ready to nvflash. If you go back to Device Manager after the Windows install has completed, it will show the nVidia USB drivers near the top of the USB device list.
Again, for Windows: Run this script which is in the "NVFlash" folder:
nvflash_gtablet.bat
This will wipe the device back to bekit's original TnT stock image except for user data, which is retained. Should take about a minute to run and the device will reboot itself automatically all the way to the main screen.
POST NVFlash:
When your G-Tablet has booted back to the main screen, you will have to check and make sure everything is set up. Particularly, get the wifi on and connected to the Internet. Almost immediately, you should get a notice about an OTA (over the air) update. This is the OTA Update to software version 3588. If it does, go ahead and have it do the update. From there, you can begin using your "stock 3588" G-Tablet.
If you don't get an automatic OTA notification, you can go the to manual "Update" icon on your tablet and have it check for updates -- and hopefully it will find OTA 3588.
Or, if neither of the above happen, you can download 3588 at the following link and install it manually:
http://tapntap.http.internapcdn.net/tapntap/viewsonic/update-smb_a1002-3588-user.zip
Note: Following is a STICKY from General Forum on the stock recovery process:
http://forum.xda-developers.com/showthread.php?t=892090
NOTICE: There are many threads out there with tell how to do this process. Others tell individuals' problem solving experiences. A few of them may not be right! The above process is not the only way to do this -- but it is fairly straightforward and it is proven. It is recommended for anyone who does not have experience with nvflashing.
***************************************************
Further references (since I'm not a Windows user): http://forum.xda-developers.com/show...0&postcount=28
and http://forum.tegratab.com/viewtopic....bbde76184e550a and http://wiki.tegratab.com/index.php/Nvflash_FAQ
An additional suggestion if you also want to tack on bekit's clockworkmod recovery versus standard recovery: http://forum.xda-developers.com/show...3&postcount=17
Hope this helps!
03/2011 update -- I've been told that this tool has been useful to erase ALL partitions, including user data. I believe you need to re-flash with the bekit 1105 above, AFTER you use this: http://forum.xda-developers.com/showthread.php?t=974422
04/22/2011 update -- I've built out both 1.1-3588-based and 1.2-4349-based versions that have effectively replaced bekit's 1105 image ("nvflash_gtablet_2010110500.zip"), at least on my own device - I'm also addding a clockworkmod recovery option. It is being hosted in the same location as my 1.2-based mods - I will be making updates there, from this point on (as I might update them from time to time).
(you'd still need bekit's Windows or Linux tools, keep in mind) I've been able to bring back my device back from a soft-brick several times, so I feel they are usable.
05/09/2011 update -- A reminder that these images are not being updated, here. I have a newer nvflash post over in the same site where I have my 1.2-based mods. The 1105 bekit image mentioned here is still relevant for 1.1-based ROM users, or you can use my 3588 ot 4349 solution at the other site.
05/10/2011 update -- I have PM'd the moderator to either unsticky this post and / or assign it to someone else, as I do not plan on updating it, here. I believe that there is a 3588 image in the TegraTab IRC that someone created, for example.
Looks good Roebeet. I wrote a little how to a while back on tegratab. I know you are aware but for the benefit of others I wanted to add the following.
One little thing is sometimes when you are done you will get a boot loop. I think it only may happen once as I never saw it again. The fix is to go into Clockwork and partition the internal sd card again. The old settings said 512 for memory, and 256 swap. Bekit updated Clockwork and now you can format all the way to 4gb if you like, and swap should be 0 as it is not used.
Edit: New wisdom says not to partition the internal sdcard to anything but 2048. Folks have had issues with memory errors in the market with anything bigger. 0 for a swap is also the recommendation as Android apparently does not make use of the swap.
roebeet said:
Wanted to expand on what was already here, since there seems to be a lot of questions that pop up. I use Ubuntu so I know that the Linux instructions are correct.
A warning in advance: nvflash makes changes to the partition structure of your device. You should tread carefully and understand the risks.
Pre-req: http://db.tt/Wm25t7U
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Other references (since I'm not a Windows user): http://forum.xda-developers.com/showpost.php?p=9564270&postcount=28
and http://forum.tegratab.com/viewtopic.php?f=6&t=8&sid=4e6bd75cda9e24e04fbbde76184e550a
http://wiki.tegratab.com/index.php/Nvflash_FAQ
-------------------------------------------
Installation
Create a folder on your PC which you use as your restore base, and then extract the platform-specific ZIP into that location.
Then, download the "nvflash_gtablet_2010110500.zip" package and unzip the /nvflash_gtablet/ folder inside into the same folder as where you dropped nvflash.
For Windows users, you'll need to have an APX-specific USB driver for the next steps (I believe that the Windows package bekit supplied has that .inf file, but again I don't know for sure). For Linux users, you don't need an extra driver.
Once ready, boot the device into APX mode (power up and volume down, at the same time - you'll see the boot screen pop up, and then go blank.). In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Linux users: At this point, open up a command window to the folder you created, and run this script:
nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically.
Windows users: (again, I did not test this myself). Run this script, in the folder you created:
nvflash_gtablet.bat
Hope this helps!
Click to expand...
Click to collapse
I need help. I finally got Windows 7 to recognize the device in APX mode but how do I flash from this point. It only shows up in my Device list with all the subfolders in it.
What is this for? Restoring to factory Rom?
Thanks,
Scott
cscotty said:
What is this for? Restoring to factory Rom?
Thanks,
Scott
Click to expand...
Click to collapse
Yes, you can use it for exactly that. I believe bekit added Launcher Pro and superuser, but other than that it's a way to completely wipe the device. Moreso than a standard recovery would do.
The pre-req link doesnt work. Can you update the link?
Thanks
roebeet said:
Wanted to expand on what was already here, since there seems to be a lot of questions that pop up. I use Ubuntu so I know that the Linux instructions are correct.
A warning in advance: nvflash makes changes to the partition structure of your device. You should tread carefully and understand the risks.
Pre-req: http://db.tt/Wm25t7U
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Other references (since I'm not a Windows user): http://forum.xda-developers.com/showpost.php?p=9564270&postcount=28
and http://forum.tegratab.com/viewtopic.php?f=6&t=8&sid=4e6bd75cda9e24e04fbbde76184e550a
http://wiki.tegratab.com/index.php/Nvflash_FAQ
-------------------------------------------
Installation
Create a folder on your PC which you use as your restore base, and then extract the platform-specific ZIP into that location.
Then, download the "nvflash_gtablet_2010110500.zip" package and unzip the /nvflash_gtablet/ folder inside into the same folder as where you dropped nvflash.
For Windows users, you'll need to have an APX-specific USB driver for the next steps (I believe that the Windows package bekit supplied has that .inf file, but again I don't know for sure). For Linux users, you don't need an extra driver.
Once ready, boot the device into APX mode (power up and volume down, at the same time - you'll see the boot screen pop up, and then go blank.). In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Linux users: At this point, open up a command window to the folder you created, and run this script:
nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically.
Windows users: (again, I did not test this myself). Run this script, in the folder you created:
nvflash_gtablet.bat
Hope this helps!
Click to expand...
Click to collapse
stanglx said:
The pre-req link doesnt work. Can you update the link?
Thanks
Click to expand...
Click to collapse
It seems to go up and down (it's bekit's dropbox). Try this:
https://www.dropbox.com/s/wrcd87u1iy31u4e
roebeet said:
Wanted to expand on what was already here, since there seems to be a lot of questions that pop up. I use Ubuntu so I know that the Linux instructions are correct.
A warning in advance: nvflash makes changes to the partition structure of your device. You should tread carefully and understand the risks.
Pre-req: http://db.tt/Wm25t7U
Linux users: You want to get "nvflash_linux_2010110500.tar.gz" and "nvflash_gtablet_2010110500.zip "
Windows users: You want to get "nvflash_windows_20100500.zip" and ""nvflash_gtablet_2010110500.zip"
Other references (since I'm not a Windows user): http://forum.xda-developers.com/showpost.php?p=9564270&postcount=28
and http://forum.tegratab.com/viewtopic.php?f=6&t=8&sid=4e6bd75cda9e24e04fbbde76184e550a
http://wiki.tegratab.com/index.php/Nvflash_FAQ
-------------------------------------------
Installation
Create a folder on your PC which you use as your restore base, and then extract the platform-specific ZIP into that location.
Then, download the "nvflash_gtablet_2010110500.zip" package and unzip the /nvflash_gtablet/ folder inside into the same folder as where you dropped nvflash.
For Windows users, you'll need to have an APX-specific USB driver for the next steps (I believe that the Windows package bekit supplied has that .inf file, but again I don't know for sure). For Linux users, you don't need an extra driver.
Once ready, boot the device into APX mode (power up and volume down, at the same time - you'll see the boot screen pop up, and then go blank.). In Linux, type "lsusb" in a terminal and you should see this "0955:7820 NVidia Corp.". 7820 means the device is in APX mode.
Linux users: At this point, open up a command window to the folder you created, and run this script:
nvflash_gtablet.sh
This will wipe the device back to bekit's original TnT stock image, except for user data which is retained. Should take about a minute to run and the device will reboot itself automatically.
Windows users: (again, I did not test this myself). Run this script, in the folder you created:
nvflash_gtablet.bat
Hope this helps!
Click to expand...
Click to collapse
Roebeet sorry but I just noticed for noobs that the linux command needs to be
. nvflash_gtablet.sh
Also if you unzip those files into a premade directory such as "gtablet" when you unzip them each have their own directories and if you ls you can see that the bash script isn't executable from there. So you need to copy either the gtablet files into the platform folders or copy all the files inside both into your "gtablet" folder. Then you can run the ". nvflash_gtablet.sh" command and voila. Sorry I am on Ubuntu and don't know if it is different, but that is the way I run them.
No worries - all replies are welcome! the more info we have, the better.
This should be stickied. Nvflash has saved my gtab many times and I think its the reason why my gtab doesn't really encounter too many Force closes. Its the perfect method to ensure your gtab is clean.
I tried this tonight to try to get my gTablet back to stock so that I could show people how to install CWM on a video but I could get neither of my Windows 7 64-bit computers to recognize the APX .inf that was included in the pack.
I have a linux machine around here somewhere I may have to use...
ehunyadi said:
I tried this tonight to try to get my gTablet back to stock so that I could show people how to install CWM on a video but I could get neither of my Windows 7 64-bit computers to recognize the APX .inf that was included in the pack.
I have a linux machine around here somewhere I may have to use...
Click to expand...
Click to collapse
My limited experience with 64-bit Win7 -- the drivers have to be signed, or else they won't work. There's a way to disable that on boot, but you can't permanently disable it. I'm wondering if the APX USB driver is signed?
Open a command prompt as an admin and type
bcdedit -set loadoptions DISABLE_INTEGRITY_CHECKS
bcdedit -set TESTSIGNING ON
This is the only way.. dont worry if the test watermark shows up.. it wont affect anything.
Also... They have a x64 driver - read this
http://tegradeveloper.nvidia.com/tegra/forum/adb-usb-driver
Hi there,
I exchanged for a new Gtab yesterday from sears (as it had some power issues).
Today, I tried TnT 2.2 on my rooted tab (Z4 for rooting). Also have ClockworkMod .8.
I partitioned my internal SDCard. But after vanilla restore, I could find my tab space reduced to 4 gigs. What should I do to restore to full 16 gigs(14+ gigs actually).
============================================================================================================================
2. I followed your instrction and partitioned again in clockworkMod and did 4 gigs and 0 in the second one. Now it shows 11 gigs for data and 4 gigs for system.
Now I inserted an external micro SD card (16 gigs) but my storage is not seeing it. What should i do? Ignore my first part please.
Your gonna have problems later if you don't repartition to 2048 and 0
satishraman said:
Hi there,
I exchanged for a new Gtab yesterday from sears (as it had some power issues).
Today, I tried TnT 2.2 on my rooted tab (Z4 for rooting). Also have ClockworkMod .8.
I partitioned my internal SDCard. But after vanilla restore, I could find my tab space reduced to 4 gigs. What should I do to restore to full 16 gigs(14+ gigs actually).
============================================================================================================================
2. I followed your instrction and partitioned again in clockworkMod and did 4 gigs and 0 in the second one. Now it shows 11 gigs for data and 4 gigs for system.
Now I inserted an external micro SD card (16 gigs) but my storage is not seeing it. What should i do? Ignore my first part please.
Click to expand...
Click to collapse
You only have 16gb to start. Partitioning you internal to 4gb uses part of that. I would go back and only use 2gb, and 0 for swap. There are things, like the new market that break with anything but 2gb.
If you mean the settings menu is not showing your external sd card that's normal. Look in a file explorer program in the / directory. Look for SDcard2. That is your external. Same deal, look for usbdisk if you plug in a usb drive.
Roebeet
also this could be helpful to Ubuntu/linux users.
in the same directory where your flash script is there is a file that is called "gtablet.cfg" if you download the clockwork.img recovery and put it in this directory you can open up the "gtablet.cfg" with a text editor
scroll down to where you see "filename=part9.img" and replace "part9" with "clockwork" and it should now read "filename=clockwork.img" this will flash clockwork and save you a step. To change it back so you flash complete stock just edit the file again and reverse it.
romanrish said:
Roebeet
also this could be helpful to Ubuntu/linux users.
in the same directory where your flash script is there is a file that is called "gtablet.cfg" if you download the clockwork.img recovery and put it in this directory you can open up the "gtablet.cfg" with a text editor
scroll down to where you see "filename=part9.img" and replace "part9" with "clockwork" and it should now read "filename=clockwork.img" this will flash clockwork and save you a step. To change it back so you flash complete stock just edit the file again and reverse it.
Click to expand...
Click to collapse
You don't even have to do that - you can just rename part9.img to something else, and clockworkmod.img to "part9.img". That's actually what I do.
roebeet said:
You don't even have to do that - you can just rename part9.img to something else, and clockworkmod.img to "part9.img". That's actually what I do.
Click to expand...
Click to collapse
Yeah I thought about that, but figured some people might get confused and forget which one was which. Either way works as well just as long as you keep both files. You should edit your original post and add that in as an option to do at the end. It will keep some from having to look through and creating a new post cause they can't find it, and keep our forums clean.
This should definitely be stickied. Mods please?
P.S. I cannot believe how awesome this forum is(Viewsonic G Tablet). I have gone to other forums and the other devs and users are not as friendly and awesome as the ones we have here. Almost brings a tear to my eye. Great job Roebeet, this should help us noobs out a lot. LOL!

Data2system without deleting data

Hi!
I read how to make Data2System rom. (http://forum.xda-developers.com/showpost.php?p=14047481&postcount=14)
I try it and it works so good. I wrote a script which do that steps automatically. There is one more difference. Now the script don't flash your rom, just transform the selected nandroid backup. So you don't lose any of your data.
1. Download this zip, and unpack it to your linux running computer.
2. Backup your rom in recovery, and copy the folder (clockworkmod/backup/<yourbackup>) from your phone to the directory where you unpacked the zip.
3. Rename in data2system <yourbackup> folder to <yournewbackup>. Take care <yournewbackup> don't contain spaces.
4. Open a terminal, and type cd <the unpacked folder> (e.g. /home/user/data2system).
5. Type ./data2system <yournewbackup>, check the output in terminal. It should be something like this:
Extract boot.img
806 blocks
Command line: mem=214M console=ttyMSM2,115200n8 androidboot.hardware=swift
End extract boot.img
Change boot configuration
Pack boot-new.img
Resize boot-new.img
Boot image prepared
System and data images replaced​If you get any errors, try this tutorial again!
6. Done, copy back, and you can make a restore ​It works if:
you have a nandroid backup
your system.img is not bigger than your data partition on your phone
Download zip here: http://dl.dropbox.com/u/18578045/Data2system.zip
If you do it again with the changed backup in practice you'll get your original backup.
Awesome. Gonna try this out.
This doesn't work!!
did you even try it yourself??
i followed everything carefully
data2system is not a recongised command
Because you have to type ./data2system <the name of the folder> and not .\data...
AND check that on your computer is running LINUX
vkrissz said:
Because you have to type ./data2system <the name of the folder> and not .\data...
AND check that on your computer is running LINUX
Click to expand...
Click to collapse
i did that and how do i check if i have linux?
how do i install it?
i am windows 7
Linux is a kind if OS.
Did you heard about Google? You can find for example how to install Ubuntu. Ubuntu is just one of linux OSs. You can run it in virtual machine, or just boot from live cd, or install instead of windows, or install to another partition beside the windows.
androidboss7 said:
i did that and how do i check if i have linux?
how do i install it?
i am windows 7
Click to expand...
Click to collapse
I dont wanna be rude, but I have to ask is this serious?
delsus said:
I dont wanna be rude, but I have to ask is this serious?
Click to expand...
Click to collapse
yes i am being serious!!
I know a little about android and computers!!
androidboss7 said:
yes i am being serious!!
I know a little about android and computers!!
Click to expand...
Click to collapse
Well Linux is an open source operating system, there are alot of differant distributions of it, (infact Android is based on Linux) you can download most distributions of it free, a few are Ubuntu (which I have in a VM) Fedora, Back Track and Red Hat (paid).
It is recommended to either dual boot your PC or run Linux in a virtual machine because program compatibility isnt great with it although you can use emulators to run programs like wine.
The switch from Windows to Linux isnt easy though especially if your not great with computers because there is so much differant.
Here is a download link for ubuntu and VMWare player (both free) for you to try out, and the data2system method in this post will work.
http://www.ubuntu.com/download
http://www.filehippo.com/download_vmware_player/
PM me if you need instructions to install and run them
delsus said:
Well Linux is an open source operating system, there are alot of differant distributions of it, (infact Android is based on Linux) you can download most distributions of it free, a few are Ubuntu (which I have in a VM) Fedora, Back Track and Red Hat (paid).
It is recommended to either dual boot your PC or run Linux in a virtual machine because program compatibility isnt great with it although you can use emulators to run programs like wine.
The switch from Windows to Linux isnt easy though especially if your not great with computers because there is so much differant.
Here is a download link for ubuntu and VMWare player (both free) for you to try out, and the data2system method in this post will work.
http://www.ubuntu.com/download
http://www.filehippo.com/download_vmware_player/
PM me if you need instructions to install and run them
Click to expand...
Click to collapse
thanks bro!!
but i think this is a bit too complicated for me!
but i have 1 question!
if i use mur4iks bootloader to resize my partitions like this (or whatever)
150 system partition and 234 data partition
is that still like data2system??
androidboss7 said:
thanks bro!!
but i think this is a bit too complicated for me!
but i have 1 question!
if i use mur4iks bootloader to resize my partitions like this (or whatever)
150 system partition and 234 data partition
is that still like data2system??
Click to expand...
Click to collapse
Its 2 different things. When you change bootloader it really resize your partitions. It take effect until you change it again.
This script (Data2system) only change one of your nandroid backups. So when you flash a new rom, or restore one of your elder backups the system partition will be the original partition. Its safer then change the bootloader, but it take effect only for one backup.
For you: if your data partition size is 234 and your system is 150 (because you change your bootloader) and then you do Data2system. On that rom you will have only 150 data.
Data2system is for someone, who need more space, but don't want to resize partitions or change bootloader.

Duel booting thread Finished :)

One of my favorite things about android is being able to duel-boot os's and playing around with Linux distros ,but ive seen a drop off of them being brought to Android sadly . so im starting this thread in order to get all the duel-boot,chroot boots and all other ones into one place if i forget one please let me now and ill do my best to add it
Note these are not all native boots and i take no responsibility for anything that happens to your device, these are not mine either and the owners should be thanked im just bringing them together :victory:
Native Boots
My favorite and best (in my opinion) are the native boots Starting off is Ubuntu as a native boot
UBUNTU
The original creators in bringing Ubuntu to the Acer a500 first are right here on XDA netham45 and sp3dev The original thread can be found here Here
To start off on booting Ubuntu Natively you're going to need Root obviously and acer recovery installer which can be downloaded from the Android market
for the sake of this tutorial ill go over booting it off the internal storage :laugh:
1.Start by making sure you have 8gigs free of internal storage as this is how big the .rar is unpacked
2. after you download acer recovery installer youll need to flash this recovery Here
3. After that download all 3 of these .rar's onto your pc put them in a folder of there own and extract the first one they should all merge giving you one rootfs File1 File2 File3
4.once you get the rootfs move it to the home directory of your internal storage
5. power off your tab and boot into your recovery using power and volume- and your good to go
6.some tweaks you could do would be
For sound
Code:
usermod -a -G audio <your username here>
For cpu frequency scale
Code:
sudo add-apt-repository ppa:artfwo/ppa
sudo apt-get update
sudo apt-get install indicator-cpufreq
it will appear in you task bar on reboot best set to performance
:laugh:
Backtrack
Ive been told it works the same way but replacing the ubuntu.img with the backtrack.img which you can download from
http://www.backtrack-linux.org/
Cannot confirm this if someone tests it please reply back
BODHI LINUX
Bodhi Linux is another Linux brought to android with the dev being here on XDA apapousek Make sure to look at the original thread and thank it Here
There are to differant builds Alpha1 and Alpha2 ill be going over Alpha2
1.Start off by using gparted or any partitioning tool should work, and partion your micro sdcard make the first one as ext4 and make it at least 1.5gb name it bodhi make your second partition 128mb at least of fat32 format
2.mount the partitions
3.download bodhi Linux from Here
4.Extract the bodhi tarball to the root of your micro sdcard by using the commands
Code:
sudo su
cd /media/bodhi/
tar -jxvf /home/name/bodhi_alpha2.tar.bz2
5.Copy recovery.img to the second partition and flash it using Acer recovery installer from Here
6.Boot into recovery and you should be good to go
7.once booted into bodhi open terminal and type in setupwifi
CHROOT
Not as good in my opinion alot less functionality but there still fun for testing out a Linux distro and require less space without having to sacrifice your recoveryThere basically running a virtual machine on top of android to run a Linux distro all the ones I've tried have been slower so i just tend to stay away from them but feel free too XD
First of all there's a couple of different apps that will help you get it installed hassle free (for the most part)
starting off there's Linux installer standard Here
There's also Complete Linux installer with two donate versions available Here
Manual Method
There's also a more manual way of setting up chroot.
1.Make sure you have a terminal emulator Here 7zip Here and a .img file for a linux distro ill put up backtrack since it seems to work well make sure you get the ARM version of Backtrack And finally Android VNC Here
2.Download the .Img file of your choice in this case Backtrack 5 and extract it once this is done you will get another folder with bt5.img.gz and a whole other bunch files right click on the bt5.img.gz and go to extract here now copy them all into a folder called BT5
3.copy the folder called BT5 to the internal storage of your device it will be around 5gigs
4.Make sure you have Root access and busybox installed
5.Now open up your terminal emulator app and type in
Code:
su
cd/sdcard/BT5
Then hit enter and type in
Code:
sh bootbt
You should see [email protected] if it worked if it did then you can go ahead and use BT5 commands or you can get a gui by typing in.
Code:
tightvncserver -geometry 1280x800
Hit enter then type in
export USER=root
hit enter then
vncpasswd
Now its going to ask you for a password just create any random one and then verify it . After that it will ask you if you want to create a view only password hit n
6.Finally open VNC android you'll have nickname which doesn't matter port which is usually 5901 if that doesn't work try 5902 or 5903 address leave bank and make sure your connected to [email protected] just hit connect and your done one final thing to remember though is when you want to exit you have to go back to terminal and type in exit to shutdown
WINDOWS
WINDOWS95
windows is actually run through an app which emulates it i believe it has little to none drivers instaled and you cant really do much that ive found but its fun to mess around with and show off :laugh: to get this up and running is pretty simple all you have to do is.
1.Download this .rar HERE
2.Extract the folder to get a sdl.apk and a folder called sdcard move both of them to the root of your sdcard
3install the .apk and open it when shutting down though you have shutdown the right way by hiiting shutdown if you dont on reboot youll get a scandisk error
WINDOWS XP
Windows xp is even slower more useless and way more complicated to run BUT its still kinda cool to have
1.First you'll want to download everything you'll need bochs for android from HERE Sdl.zip from HERE Bochs for pc from HERE and Qumu manager for pc HERE. Last thing you will need is a windows xp.iso file not .img but .iso (ide post one but i read somewhere its ilegal to post .iso for windows :/ )
2.Download and install boch's for android on your tablet then move the SDL.zip to the root of your SDcard
3.Install Boch's and Qemu manager onto your pc
4. what you going to need to do is run a virtual machine with the .iso you have so first thing you'll want to do is once you install Boch's for your pc hit the start button then go to all programs and find the Boch's folder inside of that folder there should be a program called Disk image creation tool.
5. Next type in hd then hit enter, after that type in flat then hit enter ten after that its telling you what size you want it to be usually windows xp doesnt need more than 1.5gb so type in 1500 and hit enter then finally type in c.img and hit enter.
6. Now you want to open Qemu, once inside Qemu you want to start a new virtual machine do this by going to the vm tab and click on new virtual machine.
7.you can give it any nickname it doesnt matter just give it one and hit next.
8.Now it wants to know how much ram you want to allocate to this virtual machine 512mb to 1gb is usually fine pick and hit next.
9. Then hit finish now what you want to do is install the .iso to the blank image file but you need to specify what it is so go to the drives tab, click on Harddisk zero.
10.now you have to find the file c.img its usually located in program files/bochs you might have to make sure all files is selected in your file type bar.
11.Select thec.img file and hit ok
12. Now you want to click on your cd-rom that is your windows xp.iso file so browse and find your windows xp.iso and click ok.
13.Now your ready to run your virtual machine just hit the run button (green one) and if everything went alright you should see it start to boot up.
14. Now you'll have some on screen prompts make sure you follow them and choose ntfs file system when it prompts you to. (process will take 30min+ depending on computer speed)
15. Once your installation has been completed and your at the desktop you want to stop virtual machine. click yes end session. (i know right all that time just to spend two seconds in it)
16.Now you want to find the c.img file which is no longer blank and has windows xp installed to it. Usually in program files/bochs copy it then paste it inside the folder called sdl on your sdcard. If there is already a c.img inside of it just overwrite it.
17.okay almost done (i promise ) your going to want to copy all this code
Code:
megs: 256
cpu: count=1, ips=6000000, reset_on_triple_fault=1, ignore_bad_msrs=1
# filename of ROM images
romimage: file=BIOS-bochs-latest
vgaromimage: file=VGABIOS-lgpl-latest
vga: extension=cirrus, update_freq=25
pci: enabled=1, chipset=i440fx, slot1=cirrus
ata0: enabled=1, ioaddr1=0x1f0, ioaddr2=0x3f0, irq=14
ata1: enabled=1, ioaddr1=0x170, ioaddr2=0x370, irq=15
ata0-master: type=disk, path="c.img"
#ata0-slave: type=disk, path="d.img"
#ata1-master: type=disk, mode=vvfat, path=/sdcard/HDD, journal=vvfat.redolog
#type=cdrom, path="CD.ISO", status=inserted
boot: c
config_interface: textconfig
#display_library: x
# other choices: win32 sdl wx carbon amigaos beos macintosh nogui rfb term svga
log: bochsout.txt
sb16: enabled=1
mouse: enabled=1
sb16: wavemode=1, dmatimer=500000
clock: sync=none, time0=1
Now go to your sdcard/and go the sdl folder and find the bochssrc.txt file overwrite everything in that file with the lines of code you just copied
The megs value at the top is how much ram you want to allocate to windows xp
18 Save te text document and your ready to run windows xp just open up bochs on your phone
Miscellaneous
These are all the os's that ive found that have been duel booted but are not worth it or a tutuoriol was never released will update it as i find them.
so far the only one i know of is Armedslack thsnks to hellvy from what i know of its the same way as bodhi linux but using armedslack packages
MAC OS
Im trying to figure out old mac os and newer ones right now ill be righting a tut once i get it figured out
Just adding another distro. I'm running ARMEDslack. You can use BODHI LINUX approach for installation, but use armedslack's Mini root filesystems instead. For me, there's so many stuff i have to do after installation (mainly recompiling apps & libs) and i'm not sure if anyone interesting in Slackware distro this day. So i'm not recommend this distro unless you have too much free time and know how Slackware work
Another thing, is there anyone get nvidia display driver works? i can't see any practical step to get it working, just ac100 display driver unbuntu package. If anyone get it working, pls share xorg.conf to me
Does ext4 partition has to be the first partition or second to boot bodhi because vfat as second partition cannot be recognized by cwm recovery and I cannot copy any files from internal to external sdcard
el.quechon said:
Does ext4 partition has to be the first partition or second to boot bodhi because vfat as second partition cannot be recognized by cwm recovery and I cannot copy any files from internal to external sdcard
Click to expand...
Click to collapse
first and its not meant to be copied you haven to dd it to it sorry you can't just copy it directly i don't think and fat32 is what the second partition needs to be
gears177 said:
first and its not meant to be copied you haven to dd it to it sorry you can't just copy it directly i don't think and fat32 is what the second partition needs to be
Click to expand...
Click to collapse
it booted in to terminal but usb port didnt work so couldnt use keyboard
No need to flash the kernel to recovery partition, use my dualboot bootloader.
It booted ok for me but it wont let me login at all
Sent from my LG-MS695 using Tapatalk 2
I have a couple questions...
How well does Linux(mainly Ubuntu) run on the A500? Like is it smooth and all the various controls work well.
Does the HDMI out work? If so can you extend the desktop through the HDMI out to another screen. Like have two different windows on each screen.
Drewmungus said:
I have a couple questions...
How well does Linux(mainly Ubuntu) run on the A500? Like is it smooth and all the various controls work well.
Does the HDMI out work? If so can you extend the desktop through the HDMI out to another screen. Like have two different windows on each screen.
Click to expand...
Click to collapse
I'm not sure bout hdmi if you do all the tweaks it runs reasonably well but won't run games and still lags when opening huge programs i had it for a couple of months for the most part you can install whatever you want some programs have missing repositories and you would need to create you own but there not that common i used it for compiling c+ as i need the multiwindow to do it but it will most likely crash if you try to update it i updated it to 12.04 successfully but was then having wifi problems you wil need an external usb keynoard to set it up at first when you boot up click on the top right corner and connect to wifi before doing the setup saves you a couple of steps
gears177 said:
I'm not sure bout hdmi if you do all the tweaks it runs reasonably well but won't run games and still lags when opening huge programs i had it for a couple of months for the most part you can install whatever you want some programs have missing repositories and you would need to create you own but there not that common i used it for compiling c+ as i need the multiwindow to do it but it will most likely crash if you try to update it i updated it to 12.04 successfully but was then having wifi problems you wil need an external usb keynoard to set it up at first when you boot up click on the top right corner and connect to wifi before doing the setup saves you a couple of steps
Click to expand...
Click to collapse
gears177 can you tell me how did you fix wifi after upgrading to 12.04, are you using the ubuntu image from netham and while upgrading did you have any trouble with the packages related to plymouth
el.quechon said:
gears177 can you tell me how did you fix wifi after upgrading to 12.04, are you using the ubuntu image from netham and while upgrading did you have any trouble with the packages related to plymouth
Click to expand...
Click to collapse
i never did fix it i tried everything i could think of nthing worked i dont know it seems that its not even turning on your wifi card i dont know maybe mess around in terminal and try to turn it on with wlan0 up or whatnot im not sure maybe if i get some free time ill try again as for updating i did it in small amounts and i didnt update everything im not sure but i did have a couple of errors they might of been related to plymouth
gears177 said:
i never did fix it i tried everything i could think of nthing worked i dont know it seems that its not even turning on your wifi card i dont know maybe mess around in terminal and try to turn it on with wlan0 up or whatnot im not sure maybe if i get some free time ill try again as for updating i did it in small amounts and i didnt update everything im not sure but i did have a couple of errors they might of been related to plymouth
Click to expand...
Click to collapse
Thats it plymouth i dont know why it keeps failing to instAll and i tryed that thousand times upgrading it always break wifi
Sent from my LG-MS695 using Tapatalk 2
el.quechon said:
Thats it plymouth i dont know why it keeps failing to instAll and i tryed that thousand times upgrading it always break wifi
Sent from my LG-MS695 using Tapatalk 2
Click to expand...
Click to collapse
try installing it manually might work
sorry it took so long guys but its finally done for the most part
does netham have a source code for his kernel
el.quechon said:
does netham have a source code for his kernel
Click to expand...
Click to collapse
maybe in the original thread i didnt find one but then again i didnt really look
http://forum.xda-developers.com/showthread.php?t=1158260
Great work man! I am so happy as a huge ubuntu fan to have this tutorial here for my beloved device.
Sent from my A500 using xda app-developers app
Hey guys is there a script like v6supercharger for ubuntu
Sent from my LG-MS695 using Tapatalk 2
lifeofcoding said:
Great work man! I am so happy as a huge ubuntu fan to have this tutorial here for my beloved device.
Sent from my A500 using xda app-developers app
Click to expand...
Click to collapse
Thanks
el.quechon said:
Hey guys is there a script like v6supercharger for ubuntu
Sent from my LG-MS695 using Tapatalk 2
Click to expand...
Click to collapse
I dont believe so someone could always make one....
Backtrack works natively.
If you go on kernel-xp website there is a RTL8187 kernel for chroot which works well. Its based on acer ICS source code
Sent from my Galaxy Nexus using xda premium

[USER Tips] HD/HD+ Stock Root User Tips from LeapinLar

When I originally bought the Nook HD+, I made several futile attempts to get ADB working so I could sideload apps to it. I was so frustrated that I was ready to give up and return it. But I finally got it going and with the help of a few smart users here was able to get it rooted and installing apps directly on the device. So, to save some other users the same frustration I had, I thought I would outline what I did to make this device hum.
Update 12/27/2012: A lot has changed since I first created this tips thread. I am updating it to the latest information. Most of the steps below are not necessary anymore since I now have a new thread here which lets you do these things easily with a special version of ClockworkMod (CWM) recovery for the HD and HDplus. And the text here has been modified to reflect that and include the HD.
Update 11/02/2013: Since B&N has included the gapps and Play Store in version 2.1.0 and above and since verygreen developed the new boot.img that removes B&N /system file protection scheme and I updated my HD/HD+ CWM thread to account for those changes, I decided to give this thread an update. I have added comments to the sections in italics below where necessary
If you have questions or comments on this post, reply to this thread. Please do not send me private messages or emails. By posting in the forums others get a chance to help you and if I answer your question in the forum, others can see my response and it may help them too.
1. Setting up ADB
ADB is very useful for many things but you do NOT need ADB to root anymore. Look at my thread referenced above to use CWM to root.
Also, rather than use ADB via USB, it is much easier to use a Wireless ADB app available in the Play Store.
If you want to know how to set up ADB with USB, click on the "show content" button below.
The first thing you need to do is get ADB working on your PC so that it can connect with the HD+. The instructions to do that is on B&N's own site here. (But you really don't have to do all that, see below). To make it easier for XDA users, I have attached to this post the drivers downloaded from B&N site. Download and unzip that file to your PC.
To install the drivers, do the following (I tested this on Windows XP and Windows 7):
1. On your HD+ go to settings, device information, developer options, and make sure check "Enable ADB" is not checked.
2. Plug in the device to the PC with the USB cable. MTP should install.
3. Unplug the device, go to settings again and check 'Enable ADB'. Plug back in.
4. New devices will try to install. When they do, work your way through the options until you get to the choice "include this location in search" (the terminology is a little different in Win7) and browse to the location you unzipped the driver files above. Continue and the driver should install. In Windows 7 just one device will pop up. On Windows XP, two may. (Edit: If you are having trouble with this step, go to the B&N link I have above and read and follow section 4.6 of that guide. You can skip section 4.6.2 since you unzipped those drivers earlier. But do all of the remaining steps in section 4.6).
5. An "Android Composite ADB Interface" will install. If the computer says it needs to reboot to finish. Do it.
6. If, when it starts back up, and after installing ADB below, it does not work, you may need to go the Device Manager and look to see if "Android Composite ADB Interface" device has a yellow exclamation point by it. If it does, update the driver with the B&N driver again.
7. Create a file named adb_usb.ini and put 0x2080 in it with no line feed or carriage return. Go to \documents and settings\ and open your users folder and create a folder named .android and put that file in it.
8. I have attached a file named adb.rar below. Just unrar the adb.rar file. There will be three files there that you can put in a directory (any name you want).
9. Open a command prompt and cd to wherever you copied those adb files. If you set your path to that directory, you can have the prompt set for any directory, like where your apks are stored. Type 'adb devices'. It should go through some commands ending with a list of devices connected. The serial number of your HD+ should be listed. You can now run ADB commands.
2. Sideloading Apps
Once Unknown Sources is activated by my CWM zip above, you do not really need to install apps this way anymore.
Once you have ADB connected to your HD/HD+, it is very easy to sideload install apps. Just have your command prompt set to the location that you have your apk's stored and type "adb install xxx.apk", where xxx.apk is the name of your app. It is best to name the apk to something simple with no underlines or special characters in the name. It does not matter what you name it, the real name is inside the apk. The app should install. I would start with a launcher app since sideloaded apps cannot be seen in the stock launcher. Then I would install AnyCut which I have attached to this post. This app allows you to put the Home command on your launcher's home screen so that after you make your launcher default, you can get back to the B&N home page. There is a trick mentioned in the B&N guide referenced above that lets the stock app drawer see your sideloaded apps. On the Apps screen, hold the volume up button while you press the "Apps" word at the top of the screen for 2-3 seconds. An "Extras" screen will pop up showing all of the sideloaded apps. You have to do this every time you want to see it.
3. Rooting the HD/HD+
Rooting is now very easy using CWM in the referenced thread above. If you want to use the older manual method, click on the "show content" button below. But be warned these older methods no longer work on version 2.0.5 or newer.
Verygreen came up with the original scheme to root the HD+. But it had a problem. The HD+ checks on boot to see if /system has changed, and if it has, it will not boot. It tries this 8 times and on the last time the "8 failed boot" procedure kicks in and your device is wiped clean (including your storage space) and the factory ROM is re-installed. He later modified it to survive a reboot. Someone0 developed another scheme where he can root without modifying /system directly. So the next time it boots, it boots normally. See his thread here.
ONCE YOU HAVE ROOT, DO NOTHING THAT MODIFIES /SYSTEM OR IT WILL NOT BOOT AND END UP RESETING ITSELF. Also do not install anything that installs to /system, like busybox, AdFree and a few other apps. Ignore this warning with Universal Root rev3 or higher.
4. Setting OTA (Over the Air) Updates from B&N to Manual
When you first register the HD/HD+ it will automatically update itself to the latest version. To protect yourself against further updates that might jeopardize your ability to root or add other mods, you should try to block further automatic updates. But it seems that making this mod is no longer effective, B&N updates anyway.
Again, I have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below.
EDIT: (2/22/13) I have a new way to block OTA that seems to work so far. Another user (thanks greenya!) discovered this and I have come up with a way to implement it. I use the app AdAway to put my own black list of sites to not allow access to. If you want to try this, you must be rooted. Get AdAway either on the 1mobile.com market or at its developer's site (http://code.google.com/p/ad-away/). Before you do anything go to its preferences and change the target hosts file to /data/data/hosts. That way it will not reset the device. Then go to "Your Lists". Add this site to the black list: su.barnesandnoble.com. Then go to the main menu and select "Download files and apply ad blocking". It will ask you if you want to add a symlink, say yes. (If you installed the new boot.img from verygreen or flashed my latest version of Universal Root (rev3 or higher), you do not need to worry about adaway resetting your device. Just install it normally.)
It does not seem to block any B&N shopping or downloading apps or books. I installed this on my 2.0.5 and purposely tried to update and it says it needs the update but pushing download does nothing. Then I unblocked it and pushed download and it started to download immediately. So it does work.
Basically the same method used on the Nook Color and Nook Tablet should work on the HD+. It requires that you edit a database file and that requires root access. I use the paid Speed Software's SQLite Editor. You need to use the latest version (2.0.1). I could not get my older version to get root access.
So here is a description on how to do it with SQLite Editor. Open the app and it should get granted superuser access. Then browse with it to /data/data/com.bn.devicemanager/databases. There should be a file there named "devicemanager.db". Open that with SQLite Editor. There should be a list down the left side, one being "registry". Click on that. A table opens up that looks like a spread sheet. On line 6 is com.bn.device.fota.mode. Scroll across till you see the value column. It should say auto. Edit that to manual. Save the database and you are done.
This worked on the other Nooks, so should work here. See the post below for another automatic method.
5. Setting Up Installing from Unknown Sources
I also have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below.
You can toggle the unknown sources using the same method as I used for blocking OTA. Just look for the database in /data/data/com.android.providers.settings/databases. The database is settings.db. Open secure and line 4 - install_non_market_apps and change the value to 1.
6. Setting up Google Play Store and Google Apps
I also have a CWM zip that will do this for you in the referenced thread above. If you want to see how to do it manually, click on the "show content" button below. If you have stock version 2.1.0 or higher you do not need to flash my zip. Play store is included in the ROM.
Someone0 has a post on how to add Google Play Store is here. And he now has it so you can install the entire Gapps package, including Play Store. Again, you must be rooted first.
7. Setting LCD Density
If you are like me, you hate the tiny fonts on these high resolution devices. You can change the default lcd density to help with that. The default lcd density for the HD/HD+ is 240. I changed it to 300 and everything works fine on the HD+ and fonts are a little larger. But you cannot modify build.prop on /system to do that. It will cause the device to reset itself since you are modifying /system. To get around that, create a file in /data named local.prop. Add the following line to that text file:
qemu.sf.lcd_density=300
Then reboot and your new density is set. You need to be rooted to do this on the device.
I found that changing the density on the HD made the SystemUI app crash. If you want larger fonts for the HD, I recommend you use the tip in the next section.
8. Larger System Fonts
If you don't want to set your LCD density higher but you still want larger fonts, a user (Windsor1959) just passed on this tip. Go to the B&N app store and install the free app Go Read. Once that is installed, open it and use the menu to go to accessibility settings. There is an option for larger system fonts. It works great. Thanks Windsor1959.
I also just discovered that there is another hidden setting that lets you set the system fonts from small, normal, large and huge. To get to these settings you need a third party launcher like zeam or adw and the AnyCut app I attached below. On the launcher screen long press and select shortcut. Select AnyCut from the list. Within AnyCut select activity and scroll down to fonts. Select that and a fonts shortcut will appear on the launcher screen. Open that and you can select the font size.
9. Data structures on the HD/HD+
For those of you used to having two separate partitions for data and media files, B&N has used a different scheme for the HD/HD+. They make one very large /data partition ranging from 5GB to 28GB depending on which device you have. Then they create a folder in /data (/data/media) and, using the sdcard fuse feature, link it permanently to /sdcard. So that means it is one big dynamic space for both /data and /sdcard, sharing the free space. /data is considered root and /sdcard is not.
They named it /sdcard because a lot of third party apps expect there to be an sdcard on the system and won't run unless there is one. That creates a little bit of a terminology problem for us Nook Color users. We are used to having /sdcard be an external SD. And on top of that, if we do add an external SD, it is mounted as /ext_sdcard under /mnt and that is hard for some apps to see. And when you connect your device to your PC with MTP, internal media (sdcard) is called 'internal memory' and the SD (ext_sdcard) is called 'SD card'. I think B&N did this with the expectation that users would not be rooted and be able to see that stuff under the hood.
Since sdcard is really just a part of /data, it is formatted as ext4 instead of FAT32 like the Nook Color media partition was. That means you can store a single file larger than 4GB, which is the limit for FAT32. Most external SD cards are formatted FAT32 so they are also limited to a single file size of 4GB. But it makes them directly readable by your Windows based PC. When you first put a new external SD in the HD/HD+, it asks you if you want to reformat it so you can more easily store your media files. If you say yes, it will format it to ExFAT, a new flash drive format that supports larger file sizes. That's good for your media files since you can have very large files on it. But it could be bad if you want to take the card out and put it in your Windows XP PC because XP cannot read it without an update patch from Microsoft. If you have Vista or higher, ExFAT can be read natively.
When you do a factory reset (clear /data) your media directory (/sdcard) is wiped out too.
Also, the B&N media, books, magazines, etc., are stored in /data/nookmedia, which is root.
10. White on White Text for Some Apps
One of the annoying issues with using some third party apps is the HD/HD+ displays some dialogue boxes with white text on a white background so that the text is unreadable. Someone0 and I developed a patch that can repair this. I have a zip in my CWM thread referenced above to repair the HD+ and HD. (Also since stock version 2.1.0, B&N has dramatically changed the color scheme so that the white-on-white issue is no longer the problem it used to be, I have discontinued providing white-on-white mods for version 2.1.0 and above.) If you want to see how to do it manually, click on the "show content" button below.
Someone0 and I have been working on this and have found a solution. It requires a modification to the framework-res.apk on /system. And the mod works very well. The problem is that the apk is on /system and must be symlinked using our symlink trick we use on /system files when we need to modify them. That is easy to do, but this particular apk is very critical to your system. If you do not get it installed properly, it will lock up the device and you either need to reset it completely or repair with ADB.
If you are tech savvy enough you could modify your own apk and install it. In the colors.xml file in the values section of the de-compiled apk, are two settings that need to be changed, "background_light" and "background_holo_light" need to be changed to "ffcfcfcf". The color choice was a compromise between making the text dark enough to be seen against a white background and bright enough to make things like menus show in the grey backgrounds. Re-compile and put the apk in /data, delete the apk in /system and symlink to the one in /data. The problem with doing it manually while running is as soon as you delete the apk, things go bonkers. And you cannot add the new symlink until the original apk is deleted. If you start messing with this mod, be sure to have ADB enabled so if it locks up and gets stuck on booting, you can access things with ADB and hopefully repair it. When I did my system manually, I copied the modded apk to /data with root explorer, used root explorer to set /system to read/write, then used ADB to delete the apk in /system and create the symlink. If you mess up, it will boot, but get stuck at the 99% level. Hopefully if you left ADB enabled, you can use ADB to repair whatever is wrong.
11. Implementing Userinit.d
Userinit.d can be used to run specialized scripts as part of the boot process. The HD/HD+ does not implement userinit.d, but it can be modified to allow it. And these scripts can be used to customize the performance of the device, like modify fonts, change colors, add symbolic links, modify drives, set CPU speeds and tweaks, etc.
I have implemented userinit.d in the new Universal Root zip in my referenced CWM thread above. (The latest version no longer uses it).
The scripts are usually named with numbers at the beginning and no extension. Examples would be the scripts from CM7 init.d which are: 00banner, 01sysctl, 03firstboot, 05mountsd and others. They are executed in the order of the numbers. They are plain text files that have as the first line:
#!/system/bin/sh
Then they have script commands in text format.
The beauty of these scripts on the HD/HD+ is you put them in /data instead of /system which would reset your device. Put the script files in a new folder named /data/local/userinit.d. Set the script file permissions to execute.
There are examples of userinit.d scripts out there if you search for init.d scripts on XDA or the web. Some will work on the HD/HD+ and some won't. I have a great example in the next section.
12. Swapping "sdcard" and "ext_sdcard"
I now also have this modification as a flashable zip in my CWM thread linked above. No need for root with that one.
As explained in section 9 above, the internal media is named "sdcard" so that apps can store their files there. Some users would like them stored on their external SD. I have a userinit script that will swap "sdcard" and "ext_sdcard" so that apps will store their files on the external SD. The external SD will show as "sdcard" and the internal media will show as "ext_sdcard". And it shows swapped using MTP also. It can be a little confusing since we cannot control the names, but they are swapped. If you don't have an external SD plugged in, both sdcard and ext_sdcard will show the internal media.
To swap the drives, make sure userint.d is implemented, then download the attached file, 11SDswap.rar, and extract it and put the file in /data/local/userinit.d. Set the permissions of the file to execute in all three boxes. On the next reboot, they will be swapped. To return to normal, just remove the file and reboot.
13. Skipping OOBE (Out of Box Experience)
Skipping OOBE is when you want to skip the registration step when you first start your device or after a reset. Not registering means that you will not be able to buy books or apps from B&N or, if you already have an account, have access to already purchased items. Your name will show as TEST (which can't be changed). And, if you set up wifi, the device will still check for updates and if found, update.
So if you don't want to register, or that device is already registered to someone else and you can't, just skip OOBE. There are instructions for the Nook Color here. They still work for the HD/HD+.
14. Back Up Your Stock ROM Installation with CWM v6.0.2.8 for Nook HDplus and v6.0.2.7 for the HD
Now you can backup your stock installation with my bootable CWM (ClockworkMod) recovery SDs. That way you can restore if you make a mistake and change /system so the device starts to reset itself. Just catch it before the reset completes, insert the card and restore and you will be back to OK.
You can do anything with these CWM SDs you normally would do with CWM, (nandroid backup, wipe system, data, cache, dalvik-cache, fix permissions, etc).
One of the nice features is you can wipe /data without it wiping your internal media at /data/media. So, if you want to reset, just wipe /data and your media files are still left intact. And when you do a nandroid backup, it can be placed either on internal media or your external card. The nandroid backup feature backs up /boot, /system, /cache and /data (without the media folder). So if you want the media folder backed up you must do it manually from within stock. And when you restore, you can selectively restore any partition. So if you mess up /system by putting something there that causes a reset, just selectively restore /system.
EDIT (5/22/13) - There is a new procedure brought to my attention by another user (thanks fanoush) which lets you make the CWM SD without burning the image. It seems the OMAP4 devices are a little more liberal on the booting requirements than previous OMAP devices. This makes it easier to install on any size SD. Go to my HD/HD+ CWM thread linked in my signature and look at item 1a. There are instructions and files there.
The versions attached below are under 120 MB so they can be put on any size SD. It burns very quickly. But there is no room there for any backups. After burning the SD you can use partitioning software (like Mini-Tool Partition Wizard or EaseUS Partition Manager, both free) to expand it to the full size of your SD card if you want so there would be plenty of room for backups. But be sure to only expand the back end of the partition, being careful not to touch the beginning.
I also now have a 4GB versions for both the HD and HDplus attached to the CWM thread referenced above.
To make the SD, download the version for your device and extract the file. It should be a 120MB .img file. Burn (write) that image file to your SD card using Win32diskimager in Windows. In Linux or OSX (Mac) use the "dd" command.
To use Win32DiskImager, find it on the web (here, it's free) and install it on your Windows PC. Open it (be sure to run it as administrator) and select the drive (device) that has your card reader with your SD inserted. Then in the image file box put the location where you have the extracted img file. Then when everything is set right, click on the write button. A warning will pop up asking if you want to proceed. When you have verified that you are going to write to the correct device, click on Yes. (One user overwrote their external USB hard drive by not verifying first). With the small version it should burn fairly rapidly. If you get an error message about access denied, it means you are looking at the drive with Windows Explorer. Close Windows Explorer and try again. In fact, it is a good idea to close all unnecessary windows when burning, even your browser.
Insert the SD into your powered off Nook HD/HD+ and power on. It should boot to CWM with the label v6.0.2.8 for HD+ stock. The HD version just says v6.0.2.7 for Stock. You can tell it is booting properly if the cyanoboot logo shows up after the Nook logo shows for a few seconds. If the Nook logo stays there and starts changing, it means it is booting to stock. Hard power off by holding the power button for several seconds. Try again.
Manipulate the controls with volume up/down for cursor, n key to activate and power key for back.
15. Modifying System Files on the HD/HD+
Ordinarily you cannot modify system files on these devices because they will detect the change and reset themselves back to factory stock, wiping out all your data at the same time. But there is a safe way to do it if you are rooted.
If you have installed my new Universal Root rev3 or higher or installed verygreen's boot.img, the below procedure is no longer necessary, just modify the files directly.
The HD/HD+ has a manifest file included in the boot files that has a listing of each file that is supposed to be in /system and a checksum of each file. On boot, it reads the files in /system and makes sure each file that is there is on the list and matches the checksum. It ignores directories, symlinks and missing files. If one is added or has the wrong checksum, it stops and tries to boot again. If it reboots 8 times in a row without completing the boot, the automatic reset feature kicks in and your device is formatted and the factory ROM is reinstalled.
So you can see that missing files are OK and symlinks are OK. So if you want to modify a system file, first copy it to /data somewhere, delete the original, and make a symlink in /system to replace the deleted file. The symlink points to the file copied to /data. But be careful, some files, like framework-res.apk, are being used all the time and if you delete it, even temporarily, the system goes crazy.
The scheme that someone0 and I use is to mimic /system under /data/su so that the structures are the same to avoid confusion. For example, if you wanted to modify build.prop, it would be copied to /data/su/system/build.prop and the symlink would point there. Since build.prop is not used very often, it is safe to now modify it however you want. But be careful, some settings there are vital, like hardware rotation. Mess with that and things will go all wonky on the next reboot.
Here are the specific commands to make this happen using build.prop as an example:
1. Use your root file manager to copy /system/build.prop to /data/su/system/build.prop. Set the file's permissions to match the original.
2. Delete /system/build.prop also using your root file manager
3. Set up Terminal Emulator. Start the program and type su enter. After you allow superuser access, the prompt turns to #
4. Type the following command at the # prompt (without the quotes):
"mount -o remount,rw /system"
5. Then this command:
"ln -s /data/su/system/build.prop /system/build.prop"
(That first letter is a lower case L)
6. Then this command:
"mount -o remount,ro /system"
You are done. You can now modify build.prop in /data any way you want and the system will not reset.
But before you do this mod or any other system file mod, I recommend you have backed up your system using CWM as described in the previous section. That way if you did not get it right somehow and it starts to reset, you can insert your CWM card to stop the rebooting and selectively restore /system and try again.
One side benefit of doing this build.prop mod is if B&N tries to update you in the future, it will fail because it cannot verify your build.prop because it is missing. And, in my experience, it does not try again.
16. Nook HD/HD+ internal partition structure and backups
The partition structure for the HD/HD+ is the same and is as follows:
Code:
P# Name Size Type
1 xloader 128K Fastboot Image
2 bootloader 256K Fastboot Image
3 recovery 15MB Fastboot Image
4 boot 16MB Fastboot Image
5 rom 48MB vfat
6 bootdata 48MB vfat
7 factory 448MB ext4
8 system 672MB ext4
9 cache 464MB ext4
10 data varies ext4
There is a simple process to make image backups of your internal partitions. Most people will never have to use the backups, but there is one critical partition that holds vital device specific information that was created at manufacture that is probably wise for you to back up. The process requires that you have either Terminal Emulator installed or ADB set up. And it can be done either in rooted stock or CM10/CM10.1. In Terminal Emulator or ADB Shell in superuser mode, type the following command:
dd if=/dev/block/mmcblk0p7 of=/mnt/sdcard/factory.img
This will make an image of your partition 7 that has that vital information. It also has a copy of the factory.zip file used to reset your device should you need to. If you want to back up the rest of your partitions, just change the p# and file name in the above commands to match the listing above. Partition 10 is quite large so should not be backed up using this method.
To restore a partition, just reverse the information following the if= and of= statements in the command. The information stored in partitions 1, 2, 3, 4, and 8 is specific to the ROM version you were running when you made the backup, so restoring them to another version is probably not a good idea (and if you do, restore all 5 of them together). Only do it if it is a last resort. And of course you should not restore HD partitions to the HD+ and vice versa.
Enable Unknown Sources and Blocking Auto OTA made easy (updated 12/3)
Instead of making a new thread, I have decide to make the tips that already available, but hard to use and make it simple.
So, what is it? This little thing will set Enable install from Unknown Sources and change the auto update to manual update for Nook HD ROM. I keep hearing how people are saying they have hard time making these changes so, I make it pretty dead simple. It's as simple as I can make. If you are looking at the timeline, root first, then this, and then gapps after. I now make them all so simple that it take me like 15mins to do all those 3 things from scratch. Originally I grab the sqlite3 from one of the app, which I guess I shouldn't have. Now I replace it w/ the one from CM9, which I guess is okay. And smaller size too.
If you were using verygreen version of root, try running this first.
Code:
adb shell su -c "/data/su/busybox chown shell.shell /data/su"
Pre-Requisite:
ADB and root.
NEW Instruction:
download the settings_new.zip in the attachment and save it somewhere.
unzip it.
run install.bat (for windows)
OLD Instructions:
download the settings_old.zip in the attachment and save it somewhere.
unzip it.
run install.bat (it basically just upload settings.sh and sqlite3 and change their permission, if you are on linux just do that instead)
adb shell
su
/data/su/settings.sh
*** OLD TEXT ***
While it's true that we should put heavy emphasis on not touching /system and that is not just manual works, but also any app with root access. You could be installing something like busybox via goole play store and screw everything up. That said, we are not touching /system at the moment because we lack the knowledge of that the nook is doing during boot process. I have been able to get asomething like AdAway to work which actually creating a sym link from /system/etc/hosts to /data/data/hosts file. I been doing this under the assumption that mounting and sym link are ok in the /system. But I would be worried too if there is a lot of those.
Click to expand...
Click to collapse
Lost and Confused
I tried following the instructions on the B&N’s website, but I do not see ‘Android Composite ADB Interface’ or even ‘Android Phone’ within the Device Manager of Windows. I now have ‘BNTV600’ and ‘NOOK’ under Device Manager/Portable Devices. I think this is for the big leagues and I may mess something up. Probably going to wait until there is a YouTube video guide showing step by step on how to successfully root the Nook HD+.
Many thanks to ‘leapinlar’ for the help.
cybersonic_ca said:
I tried following the instructions on the B&N’s website, but I do not see ‘Android Composite ADB Interface’ or even ‘Android Phone’ within the Device Manager of Windows. I now have ‘BNTV600’ and ‘NOOK’ under Device Manager/Portable Devices. I think this is for the big leagues and I may mess something up. Probably going to wait until there is a YouTube video guide showing step by step on how to successfully root the Nook HD+.
Many thanks to ‘leapinlar’ for the help.
Click to expand...
Click to collapse
If you read my description above, it says to update the driver for BNTV600.
No longer able to access internal & external memory on the Nook
leapinlar said:
If you read my description above, it says to update the driver for BNTV600.
Click to expand...
Click to collapse
This is what I did:
1. Plugged my Nook HD+ to my computer (ADB enabled)
2. Device Manager / BNTV600 / Update Driver Software / Browse my computer for driver software / Usb_driver_r04-windows folder / OK
3. Clicked on ‘Let me pick from a list of device drivers on my computer’
4. MTP USB Device appeared so I clicked on ‘Have Disk’
5. Browsed ‘android_winsub’ and clicked Open and OK
6. Android Composite ADB Interface appeared so I clicked ‘Next’
7. Message, ‘Windows can’t verify the publisher of this driver software’
8. Install this driver software anyway
9. Rebooted my computer
10. When the Nook is connected to the computer (ADB not enabled)
a. The Nook shows up as a G: drive and ‘MyNOOK Setup’ is the only file in it
b. Clicking on the ‘MyNOOK Setup’ brings me to a message:
• Welcome to MyNOOK Setup.
• MyNOOK Setup is a one-time installation that will allow you to tranfer your personal files to your NOOK.
• Transferable files include, but are not limited to: photos, music, videos, EPUB, PDF and Microsoft Office files.
• Note: Copyright protected files are not transferable
• To install, go to .... can't post link since im a noob
• For more information, visit ..... can't post link since im a noob
c. MyNOOKSetup.dmg appears when I click on the first link
11. When the Nook is connected to the computer (ADB enabled)
a. AutoPlay ‘BNTV600’ constantly appears.
12. I cannot access the internal or external memory on the Nook for both #10 & #11,
13. Running ‘makeroot.bat’ in the cmd for both #10 & #11 does not work either.
14. Device Manager / NOOK (BNTV600 no longer exist)
Follow my instructions to install the drivers and use my driver file from my first post. Go to device manager and delete any those three drivers you installed earlier, composite, mtp, etc. Then just do the bntv600.
Sent from my Nook HD+ using Tapatalk
Cool but....
...I am having a slight problem. I can not download your attached file usb_driver_r04-windows-Modded-for-HD.zip :/ everytime I do my computer which is running windows xp is telling me there is nothing there. Can you please help me thank you
Possible driver conflict with Samsung Galaxy Tab 7 Plus
leapinlar said:
Follow my instructions to install the drivers and use my driver file from my first post. Go to device manager and delete any those three drivers you installed earlier, composite, mtp, etc. Then just do the bntv600.
Sent from my Nook HD+ using Tapatalk
Click to expand...
Click to collapse
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
• NOOK (G Drive appears in My Computer
When ADB is enabled
• NO NOOK (G Drive in My Computer
• BNTV600 AutoPlay windows constantly pops up
I forgot to say that I have a Samsung Galaxy Tab 7 Plus installed in this computer. The following items are what I see in Device Manager:
• Portable Devices / NOOK
• SAMSUNG Android Phone / Android Composite ADB Interface
I tried deleting all the drivers and repeat your instructions but the SAMSUNG Android Phone / Android Composite ADB Interface keeps appearing.
Dopey32 said:
...I am having a slight problem. I can not download your attached file usb_driver_r04-windows-Modded-for-HD.zip :/ everytime I do my computer which is running windows xp is telling me there is nothing there. Can you please help me thank you
Click to expand...
Click to collapse
I don't know what to tell you. I just tried again with windows XP and it downloaded fine. Just keep trying. And watch where windows puts it.
cybersonic_ca said:
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
•NOOK (G Drive appears in My Computer
When ADB is enabled
•NO NOOK (G Drive in My Computer
•BNTV600 AutoPlay windows constantly pops up
Click to expand...
Click to collapse
I experienced a lot of the same symptoms.
The Nook G: is for Mac users that do not have MTP. It is so they can get the drivers they need. Notice the .dmsg (sp ?) is for them. That will only go away when you get MTP working or switch to enabled adb.
I was most concerned with getting the adb interface working, so I just ignored the MTP issues until later. In fact I temporarily disabled it so it would not keep popping up during adb.
After I got everything sideloaded and rooted, I tackled the MTP issue. With adb unchecked, I went to USB devices and uninstalled the USB mass storage device (which was the Nook G). Then it recognized MTP.
Sent from my Nook HD+ using Tapatalk
I think it's safe to say that what we(me and other who got all the stuff out seperately) did so far aren't anything very dangerous. We havn't touch any other partition or boot loader. Unless you mess them up yourself since now you have root, then the worst it could happen is a full factory reset or you can force yourself to factory reset it.
okay got a little farther
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
All these tips also help with the HD. Thanks so much!
Sent from my Nook HD using xda premium
Dopey32 said:
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
Click to expand...
Click to collapse
Then you have either not installed the Android SDK (Software Development Kit) on your PC (which includes adb) per the B&N instructions or your path variable is not set to include where you installed it.
Sent from my Nook HD+ using Tapatalk
Dopey32 said:
I have installed the drivers and my nook is having the same symptoms as cybersonic_ca. Now I am trying to figure out how to utilize the command prompt, i type in adb devices and it responds with 'adb' is not recognized as an internal or external command, operable program or batch file.
please help, i am trying to root my nook and HD+ but i feel i must be forgetting something. I am sorry if i am very bothersome but i can not figure out what is going on
Click to expand...
Click to collapse
if you can't follow or understand the instructions about adding the path to adb in the environment path you can always just cd "/to the directory adb is installed/" and run adb directly from there. easy way is to just drag the folder into the command prompt window. it'll save a bit of typing - only works if you're not running cmd as admin.
You said you modded the drivers from B&N? What did you change? Just curious...
So, instead of making another thread, since this is a tips thread, I'll just post it here.
Just in case you are not familiar with a factory reset on the Nook HD+, there are two kind of factory resets. The one that you perform yourself, which is actually not a full factory reset and the one that Nook get pissed and do the full one.
A factory reset that you perform yourself, whether from the GUI or button combination will basically clean the partition /data while a full blown one will basically restore other partition such as /system.
Why do I bring this up, because as we know, we are not perfect. I make mistake and so do other. Sometime instead of trying to re-trace the step and fix our mistake, it's easier to just reset everything. Well, since we can't just do a full blown factory reset our self, at least not very easy, we can at least force the Nook to do it for us.
So, if you felt like I did something wrong, and I don't know which step to take next, I make a little tool for you to start over. You can see the attachment, reset.zip in there, there are 3 files. You only have to run reset.bat if you need a linux version, maybe you can beg the OP to do it for you. If you exam the package, you can see that this is very similar to the original root method which force itself to factory reset, so this is basically a modified version of that. Obviously you still required ADB. Well, on the other hand, if you never get ADB working in the first place, you probably can't mess up that bad that you need this tool in the first place.
Let me make it clear, this tool WILL RESET EVERYTHING. It also REBOOT MANY TIMES. And expect the whole process to take about 10 minutes.
dbh369 said:
You said you modded the drivers from B&N? What did you change? Just curious...
Click to expand...
Click to collapse
I actually modified a generic driver by putting the Nook HD+ device id in it. I was not able to download the B&N driver so I don't know if it needed modifying or not.
Sent from my Nook HD+ using Tapatalk
cybersonic_ca said:
I followed your instructions and I successfully installed the driver you provided in your zip but the following actions occur after computer reboots.
When ADB is disabled
• NOOK (G Drive appears in My Computer
When ADB is enabled
• NO NOOK (G Drive in My Computer
• BNTV600 AutoPlay windows constantly pops up
I forgot to say that I have a Samsung Galaxy Tab 7 Plus installed in this computer. The following items are what I see in Device Manager:
• Portable Devices / NOOK
• SAMSUNG Android Phone / Android Composite ADB Interface
I tried deleting all the drivers and repeat your instructions but the SAMSUNG Android Phone / Android Composite ADB Interface keeps appearing.
Click to expand...
Click to collapse
I am having the same problem as Cybersonc_ca. I did everything according to the nook developer website and when I enable ADB on my nook hd+, it does not show my BNTV600 under portable devices but I DO have Android Phone >> Android Composite ADB Interface.
If I go to command prompt, how can I make it so that it checks that folder as well?
I apologize for such noob questions. Thank you.
sayw0rd said:
I am having the same problem as Cybersonc_ca. I did everything according to the nook developer website and when I enable ADB on my nook hd+, it does not show my BNTV600 under portable devices but I DO have Android Phone >> Android Composite ADB Interface.
If I go to command prompt, how can I make it so that it checks that folder as well?
I apologize for such noob questions. Thank you.
Click to expand...
Click to collapse
Go to command prompt and type 'adb devices' and see if you have any. And the looking for bntv600 was for getting the composite to show. You have that.
Sent from my Nook HD+ using Tapatalk

Categories

Resources