Related
Ok so i followed all the instructions and i have downloaded android on my device (once) but deleted it. Now im trying to reinstall it, i dragged the android folder to the root of my sd card and when i try to open clrcad,haret,or and other file in the "android" folder it will give my and error pop up. when i try to open up clrcad this is what i get.
" The file 'CLRCAD' cannot be opened.Either it is not signed with a trusted certificate,or on of its compenents cannon be found.If the problem persists,try reinstalling or restoring this file"
which i did by formatting and reinstalling it like 10 times...
Wir3d said:
Ok so i followed all the instructions and i have downloaded android on my device (once) but deleted it. Now im trying to reinstall it, i dragged the android folder to the root of my sd card and when i try to open clrcad,haret,or and other file in the "android" folder it will give my and error pop up. when i try to open up clrcad this is what i get.
" The file 'CLRCAD' cannot be opened.Either it is not signed with a trusted certificate,or on of its compenents cannon be found.If the problem persists,try reinstalling or restoring this file"
which i did by formatting and reinstalling it like 10 times...
Click to expand...
Click to collapse
Did you read all 5 sticky posts? if u pay attention you will have the answers
Wir3d said:
Ok so i followed all the instructions and i have downloaded android on my device (once) but deleted it. Now im trying to reinstall it, i dragged the android folder to the root of my sd card and when i try to open clrcad,haret,or and other file in the "android" folder it will give my and error pop up. when i try to open up clrcad this is what i get.
" The file 'CLRCAD' cannot be opened.Either it is not signed with a trusted certificate,or on of its compenents cannon be found.If the problem persists,try reinstalling or restoring this file"
which i did by formatting and reinstalling it like 10 times...
Click to expand...
Click to collapse
see the STEPS HERE.
when i read this topic, i only clicked on it to see what the responses would be! LOL
it must be easier to make a topic than using the search button!
you have to run those 2 apps on your phone not windows....
Yes, I think you got it, he if trying to run it from pc.
Sent from my HTC Desire using XDA App
Dude im not stupid im not opening em up on my pc im opening it on my btw im not using any custom roms the first time i downloaded android it worked perfectly,now its givong me the error i mentioned before
Everything stock
T-MOBILE VERSION
Wir3d said:
Dude im not stupid im not opening em up on my pc im opening it on my btw im not using any custom roms the first time i downloaded android it worked perfectly,now its givong me the error i mentioned before
Everything stock
T-MOBILE VERSION
Click to expand...
Click to collapse
Try downloading a fresh build. Rather than extract in pc and then copying it over, try extracting directly in the root of the sd card with the path intact (meaning for most recent builds it should extract into /sdcard/Android. There used to be some problems with dragging folders in the very early builds.
kdeguy said:
Try downloading a fresh build. Rather than extract in pc and then copying it over, try extracting directly in the root of the sd card with the path intact (meaning for most recent builds it should extract into /sdcard/Android. There used to be some problems with dragging folders in the very early builds.
Click to expand...
Click to collapse
Alrighty thanks i will try that
Start from scratch. Flash a new radio and a rom. Then format your SD card and then extract a build to the card. Be sure to follow each build's instrucions. Some you put the android folder in root, some all files are in root by themselves.
Also SEARCH and read as much as you can.
Thanks alot ... about the custom rom :
1) what custom rom looks the sames or very similar as stock but has the speed and responsiveness of a custom rom. I really like the look of stock i dont like nothing flashy or anything...
2)Lets say my phone gets damaged, while exchanging the phone will t-mo notice that its been flashed if i hard reset the phone?
3)Is it permanet or is there a way to go all the way back to factory shipped status...
Wir3d said:
Thanks alot ... about the custom rom :
1) what custom rom looks the sames or very similar as stock but has the speed and responsiveness of a custom rom. I really like the look of stock i dont like nothing flashy or anything...
2)Lets say my phone gets damaged, while exchanging the phone will t-mo notice that its been flashed if i hard reset the phone?
3)Is it permanet or is there a way to go all the way back to factory shipped status...
Click to expand...
Click to collapse
In each rom thread they will describe the goal of the rom. They will explicitly state if the goal is to look stock. I use energy roms and he offers several versions including a stock looking rom.
To load a custom rom you will need to flash HSPL. This can be removed to be back to stock for warranty service but not via a hard reset. Removing HSPL involves installing the original SPL via an SD card.
There is always the option to go back to factory conditions.
Start reading through all the threads in this sticky thread.
http://forum.xda-developers.com/showthread.php?t=713977
i tried it and it still says the same thing for me...i am so stuck on this..
Everyone mod is working i geuss except for mines i don't know what am doing wrong.
i tried to mod mine with the dexter mod 1.41 and mines wont work,
1st- i download the file didn't unzip it then i sent it to the SD card and rename it "update.zip".
2nd- i did the factory wipe/reset then i select to wipe all data
3rd- i select update.zip but i notice an message saying( E. can't read from SD card, or something like that). i dont know if that is apart of the mod or what.
4th- when it is finish then i select reboot option and when it is done rebooting i get nothing new. can you help me out are do you know something that i might be doing wrong. i also did do the 1.42 patch aswell didn't work. are is there any other newer way to do it are what. Even if you can write step by step on how to do it properly.
PLEASE HELP ME OUT.
Did your a7 have a sdcard problem before the attempt ?
And even tho it sed it can't read sdcard, did it proceed to install anyway ?
yes it did go ahead with the installation, but it is during the installation process where i saw something about can't read error, i jus got it yesterday then i did the new update from elocity website. then i tried al,ost all of dexter's mod
these are the exat message i got was (E:can't open/usb/update.zip)
(E:Can't mount USB:update.zip)
then underneath that it say (Finding update package)
then it say (Wait for 5 second)
(Installation time out)
(installation aborted)
(Formatting MISC)
these are all the thing it say during installation
Does your a7 read, mount and unmount the sdcard stock?
What is the path to the update.zip?
Sorry for all the questions, I'm just trying to get on the same page
Sent from my Mynized EVo 4G
I'm having just about the same problem. Will be interested to hear any helpful suggestions. At this point, the only thing that is working is to do the factory reset and use the basic version again. I keep getting a message that "update.zip" (although I named it "Update.zip") is a bad file. I also did not get "apply sdcard:update.zip" as a menu option, only "apply:update.zip", which when clicked did read the sd card, then gave the bad file message.
update
Lemme clarify first then update. I bought the A7 in February and loaded the most current Dexter mod at that time. It's been running beautifully until this week. Over a period of days, the A7 started acting up until it was no longer usable at all. First, the BlueTooth cut out, then the WiFi, then it just got stuck and was repeatedly lighting up the Elocity logo, but never fully booting up.
Elocity support said to do the Factory reset, which I did and it was back to baseline again. Trying to install the latest version of Dexter is where my problem started. (end of history)
So, now the update for this evening: I tried every version of Dexter's mods and got the "bad" file message each time, even after downloading them again to be sure I wasn't using a corrupted copy. However, my A7 will wipe, then update with Elocity Firmware 2.0134 and read it just fine on the exact same SD card when renamed "Update.zip".
So, now I have a very frustrated boy with autism who can't do his Google Voice search anymore and the Android Marketplace doesn't let me download the apps I already bought for him. We're back to where we were when it arrived out of the box in February, but unable to restore what we had.
I have to think there's a conflict between Dexter's Mods and the new firmware, even after one wipes everything. I even tweeted Dexter (and I don't *do* Twitter!) to see if he could respond for help and am waiting for a response.
Can someone please help? Thanks!!
Sounds like your having issues with the files you download, I have gotten in the habit of not renaming the update file to just that until its on the usb card. Seen to many messages like yours if I saved one update over a prior with the same name. Try download 1.41 and 1.42 leave their names the way they are and save them to folder on your computer. Copy them bother to sd-card leaving names the same still. once both are there rename 1.41 to Update. Remove card from pc put in tablet. Use the recovery system method (press then hold power button method) do wipe, clear cache, the use update option. If this is successful which it should be delete the 1.41 file on card that you renamed to Update, this can be done on tablet or computer. Once that file is gone rename the 1.42 to Update and once again flash from recovery system.
Hope that solves your issue
Make it a habit to not save an update over top of another, though it seems like it would keep you from having to rename but for me it always seemed to corrupt the file.
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
cwolfpack3 said:
thanks! I'll give that a try. I notice you said "PC", but I have a Mac ... could that be part of the issue ... downloading to Mac, then moving the file to SD or USB? (could be a stupid question, but if I don't ask, that makes me even more ignorant)
Click to expand...
Click to collapse
Do you end up with a folder or a zip file? Safari has a bad habit of extracting zips when it downloads them. Search my posts, there is a long ranting one that covers issues with both PC and Mac.
they're zipped ... I use Firefox 4.0, when the option comes up at download, I always click "save", not "open". Thanks, though.
well, problem solved. I ran Bestial's gapps patch over top of the new eLocity firmware and i have full functionality again. very happy mom here! now to reload all those apps for my boy! =D
Wow, I'm glad you found a solution...I have been following the thread and was getting worried.
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
bft305 said:
I had the same problem after downloading the newest elocity update and then trying dexter's mod. I found out my problem is that I renamed the file "update.zip". If you just rename the file to" update" then it loaded fine. Not totally sure why this worked and maybe it was just my case, but maybe it will help some of you out!
Click to expand...
Click to collapse
No. Your problem was that you were using a windows machine and your file extensions were hidden (I am psychic, but don't worry, I won't tell anyone your pin number). She is using a Mac, no hidden file extensions.
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
sbradby said:
How do you get to the gapps patch? I'm really having trouble getting any updates on my a7. seems like its not taking anything off the sdcard. i brought a new card and I'm still having the same issue.
Click to expand...
Click to collapse
bestialbub's patch for google apps (to use the market) can be found at http://forum.xda-developers.com/showthread.php?t=1019846 with the instructions
It's still working very well for us ... several weeks later.
Good luck!
Hello !
I am feeling really down today after been trying to get my phone working again.
There is a huge problem currently, I am really annoyed that it doesn't work at all.
First thing, my phone won't start after update it just boot loops and never seem to end it.
First thing I noticed /boot, /cache /system and most things are gone, I can load up recovery but nothing more. I have no idea what happened but the whole image folder was wiped and I had to myself put in the CWM recovery.
I can't do an upgrade "again" as it will be stuck @ the unpacking part without starting it at all.
I been trying with 2.3 V2 and with B133(My stock rom I got).
If anyone has a solution that can solve this problem please help out if you could. Also if you are about to tell me get this and that, please most cases I haven't seen any of the Firmware roms in @modaco wiki links work. Means I can't download them, so if you happen to have spare copy please upload it and link it to me. I have been googling and looking through this section twice, nothing really worked out.
Thanks in advance !
If you didn't erase the .cust_backup partition which contain the image folder with all system' s .img files, then maybe it' s damaged. I had some problems with this partition before and when I checked it with windows check disk it repairs it and I had no problems from then. So, try this, and if you still haven' t any file on image folder, you can find the original folder on X5' s forums. Is definately here, but I don't remember where is the link and I don't gonna search it for you. If you cannot find it, you can allways reflash the original rom. If you fix the partition(if this is the problem), I don't think that you'll have problems with update any more.
dancer_69 said:
If you didn't erase the .cust_backup partition which contain the image folder with all system' s .img files, then maybe it' s damaged. I had some problems with this partition before and when I checked it with windows check disk it repairs it and I had no problems from then. So, try this, and if you still haven' t any file on image folder, you can find the original folder on X5' s forums. Is definately here, but I don't remember where is the link and I don't gonna search it for you. If you cannot find it, you can allways reflash the original rom. If you fix the partition(if this is the problem), I don't think that you'll have problems with update any more.
Click to expand...
Click to collapse
Hello, thanks for the reply.
I have no idea about this .cust_backup partition and how I am supposedly to access it via windows. Also the thing you said about fixing partition within Windows, the check disk thing. I am not sure about that part either as I can load CWM and it can read the partitions but they are empty. Also there is nothing in this forums that contains original things, only way for me to fix this if someone have extra copy and can guide me on how and where to place the all needed files. I am pretty sure it's only things that are missing and I can't get a grip out of this.
So to sum up what my problem is.
I did an upgrade from 2.2 to 2.3 with official firmware, it worked out normally but after a reboot my phone became stuck in an endless loop, I can't do anything and it will not I repeat it will not allow me to "re flash" any firmware I tried so far, the 2.3 V2 and B133.
I am begging someone in this forum section, please if you have the knowledge about this problem care to help?
I can't get a refund out the phone warrenty is off and I do not have that much spare money.
Thanks in advance !
If you can get to recovery, wipe cache and data. It should be possible in stock recovery.
The cust partition has all the images for bootloader, recovery etc. You can get to it with the pink screen. Reformatting and then reinserting the images and files could help, but try that when nothing else works.
I can't give you good help via phone, but try wiping data first. Also, try if you can use some other sd card.
Sent from my U8800 using Tapatalk
Blefish said:
If you can get to recovery, wipe cache and data. It should be possible in stock recovery.
The cust partition has all the images for bootloader, recovery etc. You can get to it with the pink screen. Reformatting and then reinserting the images and files could help, but try that when nothing else works.
I can't give you good help via phone, but try wiping data first. Also, try if you can use some other sd card.
Sent from my U8800 using Tapatalk
Click to expand...
Click to collapse
The most common things I have already done, but do enlighten me what this "custom" parition is. Because in windows I do not see such partition I see a removable partition which I have now added a folder called image with these containing files.
http://forum.xda-developers.com/showthread.php?t=1370960
EDIT ** Also regarding to first person who said about Windows partition manager. The thing is I see a lot of partitions and there is no labeling for them, might be because they are ext2/3 or even something else? In anycase I can't do so much I just find it really odd I have many duplicates and I am guessing that must be errors... Because I am seeing the main recovery partition which has no label too... its at 240 MB where 135MB is used. Lastly there is my internal SD card empty and healthy still I can't reach it within Windows if I do not mount it...And can't now without going into the android OS. I Have loads of free space "partitions I don't understand why they are there".
**
Thanks for helping out, it feels not good to have a half dead phone, it's still not solved :'-(
The .cust_backup is the mount point on android for this removable partition with image folder. In windows haven' t this name. I didn't mean to use the windows partition manager, just to use windows explorer, right click on the partition and choose properties, then tools and then check disk. Of course you can use partition manager too, but because as you found there are all no labeled other partitions there and is a bit confused.
As you mentioned, you found the original image folder and you replaced the files. Did you tried to do the update again after that?
Also you can see and the internal sd partiton, but you need linux system. This partition is not fat32, so windows cannot see it.
dancer_69 said:
The .cust_backup is the mount point on android for this removable partition with image folder. In windows haven' t this name. I didn't mean to use the windows partition manager, just to use windows explorer, right click on the partition and choose properties, then tools and then check disk. Of course you can use partition manager too, but because as you found there are all no labeled other partitions there and is a bit confused.
As you mentioned, you found the original image folder and you replaced the files. Did you tried to do the update again after that?
Also you can see and the internal sd partiton, but you need linux system. This partition is not fat32, so windows cannot see it.
Click to expand...
Click to collapse
I have placed all things that I got from here.
http://forum.xda-developers.com/showthread.php?t=1370960
And I can't run the upgrade firmware, it gets stuck at first stage which is to unpack the the update.app thing.
It just stays like that not blinking and frozen.
Did you tried now that you have the original files, to go to recovery mode and wipe data etc?
Also when you try to do the upgrade do you have the device connected with the cable?
I had this problem once and I think that when I disconnected the cable(or maybe wasn' t connected and I connected it, I don't remember well), the proccess bar starts to moving after a while and the upgrade completed successfully.
dancer_69 said:
Did you tried now that you have the original files, to go to recovery mode and wipe data etc?
Also when you try to do the upgrade do you have the device connected with the cable?
I had this problem once and I think that when I disconnected the cable(or maybe wasn' t connected and I connected it, I don't remember well), the proccess bar starts to moving after a while and the upgrade completed successfully.
Click to expand...
Click to collapse
You are not understanding me :-(, I have wiped already millions of times in millions of different ways just to get it work. And no, I don't have the device connrected when I upgrade, it won't work properly then, I have tried to wait for the progress bar to "start" move it won't happen the battery will die, and nothing happened.
I can't go in with normal Recovery mode, can only go in with CWM, the normal recovery mode is really small, I mean only 3mb, while the froyo version is 5mb. Now I am asking if you have the time to upload the image files from 2.3 V2, the ones in forums are for V1. Which I don't know might conflict.
Thanks again for trying to help me out, this is really frustrating to get it to work.
**EDIT**
I worked it out !
I think I understood what you meant, I did as you told I started first with pluggin in the charger forced it to upgrade and now it's upgrading, thank you so much dancer_69. I was going to go tomorrow to buy a new 2nd hand smartphone. But now I can save my money for other things !
**EDIT of EDIT **
I seem to have downgraded to B133, I will try now with B158 2.3 V2 again and hopefully it will work now.
Yes, wasn't clear because I don' t remember what I've done and solve it. But I think that I did it like you discribed too.
Anyway I'm glad that was helpful(kind of)..
And don' t give up so soon with smartphone' s bricks, I've faced brick kind of problems many times and if the device it' s not completely dead, there is something you can do. Maybe need more search or many tries(sometimes the same things) but at the end(and of course If there isn't a hardware problem) device can unbrick.
Bought an Axon 7 from China 1.5 years ago. Very satisfied with it, but only got 2 OTA. Last one a couple of months ago. I tried in vain to identify the type. It is marked A2017 on backside. Buildnumber is ZTE_A2017CTJMV1.0.0B04. Is it possible to upgrade manually to Nougat?
Nisse1234 said:
Bought an Axon 7 from China 1.5 years ago. Very satisfied with it, but only got 2 OTA. Last one a couple of months ago. I tried in vain to identify the type. It is marked A2017 on backside. Buildnumber is ZTE_A2017CTJMV1.0.0B04. Is it possible to upgrade manually to Nougat?
Click to expand...
Click to collapse
That is really weird. But of course it is possible
Look, there are three ways to do this. You have the official method, which involves downloading the OTA yourself from the support page, unzipping it, putting it on the internal storage or SD and going to Updates to apply it. This one might fail. Then there's the TWRP way, but you need to unlock the bootloader. And then there's the MiFlash way, where you don't need unlocked bootloader and it will not fail, but it's a little bit of an extreme...
For now, do this:
http://devicedownload.zte.com.cn/support/product/201606031040/sd/20171009174830988.zip
Download that file and unzip it. There will be a file called "update.zip" and maybe a pdf inside. Take the update.zip and put it in the root of the internal storage. Then go to settings -> Updates, and it should detect it. Install it
Thank You
Thanks,
Downloaded and extracted the update.zip file. Put in the root of SD. Tried the system update. Got answer "Software is up to date" But nothing happens.
Nisse1234 said:
Thanks,
Downloaded and extracted the update.zip file. Put in the root of SD. Tried the system update. Got answer "Software is up to date" But nothing happens.
Click to expand...
Click to collapse
Try putting on the internal storage (not the SD card). If it still does not appear, then try updating through the stock recovery. That should work.
EDIT: just to be clear, you did not extract the contents of the update.zip, did you? You need to put the actual update.zip on the internal storage (you can try on the external sd card). As mentioned by choose an username, check the update.zip you downloaded. It it contains another update.zip, that is the file you need. You may have already done this, but I have seen others still get it wrong...
EDIT 2: that being said, your current version number seems strange. I wonder if that is the problem. Maybe the version you are trying to install is not compatible and therefore not seen by the system.
joaste said:
EDIT 2: that being said, your current version number seems strange. I wonder if that is the problem. Maybe the version you are trying to install is not compatible and therefore not seen by the system.
Click to expand...
Click to collapse
That's the point. I wanted to see if the normal update could go normally or not. Next step is MiFlash
At least we know it's an A2017...
Choose an username... said:
That's the point. I wanted to see if the normal update could go normally or not. Next step is MiFlash
At least we know it's an A2017...
Click to expand...
Click to collapse
You can still try first through stock recovery.
Right...
joaste said:
Try putting on the internal storage (not the SD card). If it still does not appear, then try updating through the stock recovery. That should work.
EDIT: just to be clear, you did not extract the contents of the update.zip, did you? You need to put the actual update.zip on the internal storage (you can try on the external sd card). As mentioned by choose an username, check the update.zip you downloaded. It it contains another update.zip, that is the file you need. You may have already done this, but I have seen others still get it wrong...
EDIT 2: that being said, your current version number seems strange. I wonder if that is the problem. Maybe the version you are trying to install is not compatible and therefore not seen by the system.
Click to expand...
Click to collapse
The file "update.zip" contains 29 sub files, none of them was named update.zip.
No I did not unzip it.
This time I put the "update.zip" in the root of the phone folder. But nothing happened when I run the Settings»update.
How do I post screen shots in this forum?
Nisse1234 said:
The file "update.zip" contains 29 sub files, none of them was named update.zip.
No I did not unzip it.
This time I put the "update.zip" in the root of the phone folder. But nothing happened when I run the Settings»update.
How do I post screen shots in this forum?
Click to expand...
Click to collapse
Okay. Put it in the SD card. Then turn the phone off.
After it is completely off, hold Volume Up + power until the zte screen appears. You should get into the stock recovery.
Now, the stock recovery will most probably be in chinese, but you have to use an option that says 'sd' between a bunch of chinese stuff. It's easy to spot. Scroll to that option with the volume keys and select it with Power. The contents of the SD card will appear. Select the update.zip and see if it works or not.
Well...
Choose an username... said:
Okay. Put it in the SD card. Then turn the phone off.
After it is completely off, hold Volume Up + power until the zte screen appears. You should get into the stock recovery.
Now, the stock recovery will most probably be in chinese, but you have to use an option that says 'sd' between a bunch of chinese stuff. It's easy to spot. Scroll to that option with the volume keys and select it with Power. The contents of the SD card will appear. Select the update.zip and see if it works or not.
Click to expand...
Click to collapse
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Nisse1234 said:
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Click to expand...
Click to collapse
Nothing. If you use MiFlash they will get erased, but not this way.
Think about it this way; doing this from the Updates section actually issues a command that gets you into the recovery to flash the file. So basically you skip the Updates part.
Please tell me if the recovery is in chinese later
Nisse1234 said:
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Click to expand...
Click to collapse
Also a small FYI:
-Contacts are backed up on your Google account, and even if you don't have one you can export all of your contacts to a .vcf file, then back it up, and then import it once you finish
-Apps... Just download them again. You can backup the 'Android' folder that's on your internal storage, most games save their data there.
-Bank ID? Isn't that just a log in?
I format my zte axon 7 A2017G and now am stock on WiFi(when ever I tap next it will load then return to WiFi) and it seems the phone is locked by zte please how do I unlock it
Nisse1234 said:
....I have just one mobile. What will happen with data like contacts, apps, bank-id etc?
Click to expand...
Click to collapse
no,but you'd better make a backup .in order to prevent accidents
Hi,
got a friends SM-G950F. Its on G950FXXU5DSFB_DBT.
Tried to flash COMBINATION_FA70_G950FXXU5ASF1 via Odin. On the phone i get: only officaily released binaries are allowed
Saw here and here that it seems there is a COMBINATION_FA70_G950FXXU5ASF1_FIX file available, just dont be able to download it cause i only find dl on liveon and seems impossible to activate the free account to download the file.
so my 2 question:
1. will this file (G950FXXU5ASF1/_fix) generally work on G950FXXU5DSFB_DBT? as im a OnePlus guy i dont exactly know all parameters in the samsung naming convention. seems first comes model, then BL version. Thought rest would be language stuff wich wouldnt be important (for me) for combination use.
2. someone got this file or one combination file which should work on the version i got here?
thx for any help!
noe one can help or at least point me in the right direction?!
daSn00p said:
noe one can help or at least point me in the right direction?!
Click to expand...
Click to collapse
Just curious if you have unzip the file and then put it into AP section of Odin.
sure
then i got the message as written in intital post.
anything new?!
come on, nobody?!?