Hi,
i have problems connecting htc touchII phone's to a wlan, the wlan has 60 Access Points wich are connected through a server wich manages the access points. Next a radius server (wlan protocol: peap) allow users to connect to the wlan (with laptops it is working) and a certificate server deploys the certificates. (another server is DC and DHCP)
With the laptops you get a good certificate by logging on to the network with a network cable, buth this isn't possible with a pda.
has anyone experience with this?
Related
Hi guys,
I don’t know you guys can help me or not well My problem is
I’m trying to connect my I-Mate PDA2k to Senao Wireless Assess point my access point connected with my network switch .My access point showing WAN light and on my mobile also showing “W” its mean PDA getting signals but I can’t access internet from my PDA.
I don’t know how to configure access point I took access point without catalog and serial cord I don’t we use serial cord or not.
In simple words I want 2 access internet without GPRS.
Information:
SENAO
2-port switch wireless router printer server
SL-2511SR PLUS(F200)
MAC 005018578BO
I-Mate PDA2k Microsoft
OS windows 2003 CE
Local network
IP Class Local = 192.168.0.XX
Internet Sharing = ON
Look for help on configuring your the Senao web site for configuring your wireless router: www.senao.com.tw. I have an access point and it's working like a charm with my Blue Angel.
If you don't have a DHCP server or you have not configured your wireless router as a DHCP server, follow these procedures on your PDA:
Tap Start, Settings, Connections (tab), Network Cards (icon), Network Adapters (tab), tiacxwln Compatible Wireless Etherne....
Then check: Use specific IP address. You'll need to set values for IP Address, Subnet mask, and Default gateway. You IP address should be (quoting you) something like 192.168.0.xxx and subnet mask is probably 255.255.255.0
Also be sure to tap on Name Servers, and fill in the info there, you'll need a DNS address to access the Internet.
Finally, to configure your proxy server, go back to Connections, Advanced, Select Networks, and create a new connections and configure the proxy server accordingly, if it exists. If you're supposed to connect thru SecureNAT (ie Default gateway), you can simply ignore this step, or create a network profile that "connects you to the Internet" without specifying a proxy server.
i got usb wlan adapter. it's ip is 192.168.1.130.
the lan adapter in my pc has 192.168.1.84 ip.
all computers on my local wired network has 192.168.1.* addresses and 255.255.255.0 subnet.
i fixed the IP of SD sandisk wifi adapter on my mda compact to 192.168.1.131.
Usb adapter is in peer-to-peer (ad-hoc) mode and i normaly connect with ppc to it. i got 80-100% signal all the time.
the problem/question #1: why i cant ping from ppc to PC ? firewall turned off.
#2 - if i could ping it, would i be able to ping all the other ip's on my wired network?
#3 - if i could be able to ping all of those computers, how should i set-up a workgroup on ppc and be able to map network drives through wlan link?
#4 - if i would be able to map the drive over wifi link, would i be able to add mine 20.000 mp3s to the pocketmusic's playlist and play them wirelessly?
thanks in advance!
And when i ping from PPC - i see on pc that "received" packets are raising -
ie. now it shows 12 packets received, when i run ping on ppc to pc, the
number increases to 16 (4 pings!) but all are time-outed....
And if the IP on both sides are set to "automaticly", they got assigned
169.254.*.* IP's. Then the ping goes through correctly but i can't still
access the network. The network bridge between LAN and WLAN connection only
made things worser, making my internet connection unusuable (DSL through the
same LAN connection) so i deleted the bridge. Now - ping is going but i
still cant map my pc's drive.... what could be the problem...
Same problem
Dakky,
I have the exact same problem. I bought a Netgear WG111 Wireless USB dongle. I created an ad-hoc network, connected to it but can't connect to the internet or browse my shared. On my desktop the sent packet go up but not the recieved.
Are we both being stupid, can't you connect your PPC to your PC using an ad-hoc network? I have now tried to connect with two different desktops to my XDA and a friends XDA IIs running WM5 to my desktop but had no success. I can connect to an access point and browse file/internet no problem.
I have an XDA EXEC and run XP Pro on desktop.
I've got similar problem. I have Linksys Wireless-G usb network adapter, i assign same class IP adresses (192.168.2.1, 192.168.2.2, mask 255.255.255.0) the wifi connects in ad-hoc modebut how can sync over wifi ?, if I am able to sync over wify i will be able to use my pc's internet connection wich is a lot faster than any gprs/edge
I don't think you can network in this way - basically you have a bunch of clients but no 'server' I think you need a wireless hub (with Internet connection in there somewhere) in there somewhere.
If you do a search on microsoft web site ther is some info about using a PC as an internet share for other PCs but you have to use a very specific IP address rnge for this and set the share PC up in a certain way
I have a SuSE 9.3 machine which has a wireless card configured and installed, it acts as a wireless router and has DHCP configured and installed.
What I am trying to do is to get my Exec to connect and use the Linux machine as its DHCP, DNS and gateway server.
I also have a laptop with a wireless card installed running Win2000 Pro.
My problem is this, my laptop is configured fine, it is assigned an IP adress correctly and can connect to the internet via the Linux gateway.
My Exec does not. My Exec told me it had found a new network, which was the SSID of the network card I had configured. I edited the settings so that the Exec knew that Shared authenticatin is used and gave the passkey, the Exec is assigned an IP address, but it is not in the range of IP's that I have specified to be allocated to DHCP clients.
Does anyone have any tips or ideas?
EDIT
One after thought, what level of encryption does the WiFi on the Exec use for the passkey? is it possible to change this?
Try this, its needed to get JJ to connect to a win2k3 share, the same may apply for dhcp, not sure, worth a go
--Universal can't connect to Windows Server 2003--
Cant map to a Windows 2003 Server share? Is it also a Domain Controller? Check the server for
start / programs / administraton tools / Domain Controller Security Policy
Then check Local Policies / Security Options :
Microsoft Network Server: Digitally sign communications (always)
change to disabled
ohh and 128 bit works a treat
Try using Open authentication in place of shared. This is the Linux default.
I am trying to establish a VPN connection but cannot get the connection to work.
I am using the built in MS VPN client of Win Mobile v5.0 (5.1.1700 build 14352.0.1.0)
I am having real problems getting a VPN connection set up with our network.
I have tried both PPTP and L2PT
When L2TP, I was authenticating with a preshared key
Firewall logs show PPTP negotiation successful, and issues a VPN IP address to the device
It can ping the firewall external interface, but times-out trying to reach an internal address
The VPN session is established, but the firewall logs don't register either deny or allow traffic for each internal ping request, rather the firewall packet error count increments for each failed attempt.
Any help is greatly appreciated.
I had problems with PPTP - gave up
I hate the way Windows mobile labels connections.
I connect to many customers with PC Anywhere, VNC, SSH etc and I have access via serveral different windows PPTP VPN.
Like you I setup the details in connections and try to dial.
Nothing seems to happen. The connect option does not change to disconnect. So I assume it is not connected.
I have a feeling these connection do not work over WIFI. and perhaps work over T-mobile 3g only, to maximise data revenues.
Seems very buggy to me. I would really like someone to post a working example/Instructions. Can I get a refund on my MDA PRo?
MS please note it is not a connection to my work or an internet connection it is to a customer for remote support, likewise I often connect remotely to my home via PPTP from my office.
confirmed VPN works over t-mobile 3g not Wifi
SEems the VPN links only work over 3g not Wi FI.
I'm using a PPTP connection over either 3G of WIFI depending on te active connection.
- When WIFI is active the PPTP connection connects using WIFI (I can switch off the phone, so it must be using that one)
- When no WIFI connection is active it automatically connects to 3G first, and than starts the PPTP session
In network management I'v set:
Internet:
Internet (the one containing the 3G connection)
select 'this network connects to the Internet' on the proxy tab.
private network:
My Work (the one that contains the vpn connection)
do NOT select 'this network connects to the Internet' on the proxy tab.
So as you can see, nothing special (I'm using a Qtek 9000 with standard Wm5 ROM)
Anyone get these two to play nice together?
Details:
Cisco PIX 501e at the office
WM6 3g phone (HTC TyTn II)
vista/xp laptop (working properly on either would be great right now )
VPN setup on the pix is, i believe, fine. I could be wrong tho, i set it up by trial and error + reading the manual having never even touched a cisco device before
It works tho and has worked flawlessly for months now with Cisco VPN Client on XP or Vista machines.
Old phone was WM5 and used the clunky and annoying modem emulator to enable a laptop to use it to connect to intarwebs in the middle of nowhere, this was great and after faffing about getting it setup worked fine (required you to be logged in as administrator on vista tho :\ and not just a user account with admin privileges, actually administrator. Annoying.)
New phone is WM6 and uses internet sharing to connect with a laptop, this is a much better solution with no faffing about in vista and XP
Problem: Cisco VPN client connects to the pix through Internet Sharing on the phone just fine, however no traffic gets through.
Cannot ping, web browse, dns, rdc or anything to the network at work. Tried with Cisco VPN client v4.6.00.0049 and v5.0.01.0600 on XP and v5.0.00.0340 on Vista, none work.
This sucks
Now, i know its not a problem with the laptop or the vpn software on the laptop as these work fine when connected over ethernet or wifi.
Its not a problem with the phone's 3g connection, i installed a trial of bluefire vpn client onto it and that connects to the vpn and works just fine when the phone is in standalone mode.
However for the life of me i cannot get the two bloody things to work together.
Plz halp
Hi,
Often times, the inability to ping a local host (computers or other connected devices e.g router, hardware firewall, printer, PPC, etc) or hosts, is due to the firewall not allowing traffic through the router. It can also be that the hosts are incorrectly configured to be on different subnets, even though they are local, as in your own case.
Proceed as follows to troubleshoot:
a). Ping the router
Note that the idea is to see if we can establish communication with the router or hardware firewall such as the Pix.
At command prompt (c:\>) type:
ping 192.168.0.1
(each router manufacturer uses a different default internal IP address for its router) - the one above is for a Netgear or D-Link router - for a Cisco router, you would need to know the Cisco IOS command - see your router manual for this.
b). ipconfig /all
Note: there is a space before the forwardslash.
When it returns the parameters, check to see that the IP addresses are all on the same subnet.
This is crucially important for you to take good note. If you are not able to ping a local host or gateway, it's most likely due to this.
c). Ping the Pix Firewall (using its IP address)
d). Ping a remote IP address, e.g. your ISP's gateway or DNS server
e). Is there traffic? If it returns successfully, then ping the other hosts, including the VPN client.
Pix Firewall
Check to see that the Access Control List is configured correctly by ensuring that the IP addresses of the connected hosts have been entered, with the relevant access rights.
Router
Log on to the router. Whilst there:
Ensure that the hosts (computers, etc) are all on the SAME subnet. If they are on different subnets, you must correct the IP addresses to reflect that they are on the same subnet.
Note: If you do really want them to be on different subnets, then you need to use a default gateway.
Hope this helps.
kiwi992.