XDA Exec issue WiFi and DHCP - JASJAR, XDA Exec, MDA Pro General

I have a SuSE 9.3 machine which has a wireless card configured and installed, it acts as a wireless router and has DHCP configured and installed.
What I am trying to do is to get my Exec to connect and use the Linux machine as its DHCP, DNS and gateway server.
I also have a laptop with a wireless card installed running Win2000 Pro.
My problem is this, my laptop is configured fine, it is assigned an IP adress correctly and can connect to the internet via the Linux gateway.
My Exec does not. My Exec told me it had found a new network, which was the SSID of the network card I had configured. I edited the settings so that the Exec knew that Shared authenticatin is used and gave the passkey, the Exec is assigned an IP address, but it is not in the range of IP's that I have specified to be allocated to DHCP clients.
Does anyone have any tips or ideas?
EDIT
One after thought, what level of encryption does the WiFi on the Exec use for the passkey? is it possible to change this?

Try this, its needed to get JJ to connect to a win2k3 share, the same may apply for dhcp, not sure, worth a go
--Universal can't connect to Windows Server 2003--
Cant map to a Windows 2003 Server share? Is it also a Domain Controller? Check the server for
start / programs / administraton tools / Domain Controller Security Policy
Then check Local Policies / Security Options :
Microsoft Network Server: Digitally sign communications (always)
change to disabled
ohh and 128 bit works a treat

Try using Open authentication in place of shared. This is the Linux default.

Related

I-Mate PDA2k Wi-Fi -- SENAO wireless Access point

Hi guys,
I don’t know you guys can help me or not well My problem is
I’m trying to connect my I-Mate PDA2k to Senao Wireless Assess point my access point connected with my network switch .My access point showing WAN light and on my mobile also showing “W” its mean PDA getting signals but I can’t access internet from my PDA.
I don’t know how to configure access point I took access point without catalog and serial cord I don’t we use serial cord or not.
In simple words I want 2 access internet without GPRS.
Information:
SENAO
2-port switch wireless router printer server
SL-2511SR PLUS(F200)
MAC 005018578BO
I-Mate PDA2k Microsoft
OS windows 2003 CE
Local network
IP Class Local = 192.168.0.XX
Internet Sharing = ON
Look for help on configuring your the Senao web site for configuring your wireless router: www.senao.com.tw. I have an access point and it's working like a charm with my Blue Angel.
If you don't have a DHCP server or you have not configured your wireless router as a DHCP server, follow these procedures on your PDA:
Tap Start, Settings, Connections (tab), Network Cards (icon), Network Adapters (tab), tiacxwln Compatible Wireless Etherne....
Then check: Use specific IP address. You'll need to set values for IP Address, Subnet mask, and Default gateway. You IP address should be (quoting you) something like 192.168.0.xxx and subnet mask is probably 255.255.255.0
Also be sure to tap on Name Servers, and fill in the info there, you'll need a DNS address to access the Internet.
Finally, to configure your proxy server, go back to Connections, Advanced, Select Networks, and create a new connections and configure the proxy server accordingly, if it exists. If you're supposed to connect thru SecureNAT (ie Default gateway), you can simply ignore this step, or create a network profile that "connects you to the Internet" without specifying a proxy server.

Multiple IP addresses

Is there a way to set-up more than one IP address for the Wi-Fi network card on a BA device. I need to connect to the wireless network at school :twisted: and to my local access point at work. However, everytime I need to do that, I have to change my IP address accordingly. So I was thinking if I could configure 2 IP addresses on the same network card, this would be eliminated (It is possible on NT systems thru the TCP/IP properties and on 95 Kernels thru the registry).
I have HitchHiker installed, which manages wireless access points, but it's just useless!

Wi-fi authenticated but not working.

Hi, I recently got my first WM device with Wi-fi (T-Mobile Vario III). I've been trying to get Wi-fi working with my network, but it doesn't seem to want to play!
I'm using WPA with AES, and using 802.1X authentication (my access point connects to my FreeRADIUS server). The same Linux box that runs the RADIUS server also runs the DHCP server for the network.
I'm using EAP-TLS authentication for the network (I based the setup for the network on this http://wiki.freeradius.org/WPA_HOWTO).
I've installed my root CA cert and intermediate CA cert (not covered in the howto, but I prefer to use and intermediate 'working' CA "just in case" ) on the Vario III. I also generated a client certificate/key for the Vario and installed it successfully on the device.
I then went on to Settings->Connections->Wi-fi and chose to add a new connection and did the following:
1) Entered the network name (SSID) and selected the "This is a hidden network" checkbox (also set it to be connecting to "The Internet" - I had to go to the network adapters tab as well and set the wi-fi adapter to be "The Internet" from "Work")
2) Selected authentication to be WPA and Data Encryption to be AES.
3) Selected the EAP type to be "Smart Card or Certificate" and went to properties. In the properties box I was shown the only personal certificate I have (i.e. the client certificate that I just installed for network authentication)
I then connect to the network, and get a User Name/Domain dialog (I don't really understand why). This is pre-populated with my name, but I've tried the following in this box (the only way to get it back after having entered something appears to be a hard reset - but there must be another way?):
1) The default provided (i.e. my name)
2) The CN for the personal certificate
3) Nothing
In each case I leave the 'Domain' field empty. With all three of the above the FreeRADIUS server reports successful authentication and the Vario III appears to be connected to the network. If I go to Settings->Connections->Wireless LAN, on the Advanced tab it says that it is 'Associated to network'
The problem is that even though I'm connected to the network and have been allocated an IP address (I have my DHCP server assign a specific IP address to specific MAC addresses), I cannot connect to any websites - I don't have anything over than Pocket IE installed on the device yet. I can't even connect to the management page for the AP that the Vario III is connected to.
This setup works perfectly from a WinXP box.
Has anyone got any ideas on what could be going wrong, or advise on how I can troubleshoot? Anyone know if there are logs stored on the device for wireless connectivity (either a log file or something like the event viewer in XP)?
Any help appreciated.
Thanks
Hi,
I have WiFi setup and running on my device, XDA Orbit, using WPA and AES.
First of all, whilst inside the Network Adapters tab, make sure that:
'My network card connects to': WORK
Secondly, in 'tap adapter to modify settings' you'll need to click on a particular network adapter card inorder to configure it.
In my case, I chose the SDIO WLAN Wireless Adapter. I then clicked the radio button 'Use specific IP address' and configured the IP address of my device, exactly as it is assigned in my Netgear wireless router.
If you haven't assigned a specific IP address to your device, just click the radio button next to 'Use server-assigned IP address'.
On the 'Advanced' tab of Wireless LAN, mine also reads 'Associated to network' as the status. It also has the MAC address of my device, followed by its IP address. The three fields were all filled up automatically, by the router. I never filled this up. However, I configured the router with the necessary details.
Troubleshooting:
1. Ping your device from your PC or notebook.
The idea is to be able to see if there is communication between your router and the device.
Example: at c:\>ping ......... (.....being the name or IP address of your device as entered in the router)
2. If you have a firewall, disable it now and ping again. This step is necessary because the firewall could be stopping your device from connecting to the router if it is not configured in the firewall's access list.
3. Go to your PC/notebook and type: ipconfig /all at the command prompt.
Hopefully, you should see the device's name come up as well as other parameters, including its MAC address.
4. Ensure that the device is allowed access to your internal network and configured as such, inside the router, using MAC address filtering. This means that you MUST ensure that the correct MAC address of the device has been entered.
Summary:
1. Configure your device inside the router - name/mac address or name/IP address
2. Configure your firewall to accept connections from the device
3. Ping the device as well as the router
4. If you have another computer, try and see if you can connect to the router from there.
5. Ensure that the router, PC or PPC are all on the same subnet. This is crucially important for communication amongst the devices.
By typing ipconfig /all, you will be able to determine as to whether all the computers as well as the PPC on your network are on the same subnet.
Many a network have failed through this problem.
Hope this helps.
kiwi992.

Cisco VPN + WM6 Internet Sharing?

Anyone get these two to play nice together?
Details:
Cisco PIX 501e at the office
WM6 3g phone (HTC TyTn II)
vista/xp laptop (working properly on either would be great right now )
VPN setup on the pix is, i believe, fine. I could be wrong tho, i set it up by trial and error + reading the manual having never even touched a cisco device before
It works tho and has worked flawlessly for months now with Cisco VPN Client on XP or Vista machines.
Old phone was WM5 and used the clunky and annoying modem emulator to enable a laptop to use it to connect to intarwebs in the middle of nowhere, this was great and after faffing about getting it setup worked fine (required you to be logged in as administrator on vista tho :\ and not just a user account with admin privileges, actually administrator. Annoying.)
New phone is WM6 and uses internet sharing to connect with a laptop, this is a much better solution with no faffing about in vista and XP
Problem: Cisco VPN client connects to the pix through Internet Sharing on the phone just fine, however no traffic gets through.
Cannot ping, web browse, dns, rdc or anything to the network at work. Tried with Cisco VPN client v4.6.00.0049 and v5.0.01.0600 on XP and v5.0.00.0340 on Vista, none work.
This sucks
Now, i know its not a problem with the laptop or the vpn software on the laptop as these work fine when connected over ethernet or wifi.
Its not a problem with the phone's 3g connection, i installed a trial of bluefire vpn client onto it and that connects to the vpn and works just fine when the phone is in standalone mode.
However for the life of me i cannot get the two bloody things to work together.
Plz halp
Hi,
Often times, the inability to ping a local host (computers or other connected devices e.g router, hardware firewall, printer, PPC, etc) or hosts, is due to the firewall not allowing traffic through the router. It can also be that the hosts are incorrectly configured to be on different subnets, even though they are local, as in your own case.
Proceed as follows to troubleshoot:
a). Ping the router
Note that the idea is to see if we can establish communication with the router or hardware firewall such as the Pix.
At command prompt (c:\>) type:
ping 192.168.0.1
(each router manufacturer uses a different default internal IP address for its router) - the one above is for a Netgear or D-Link router - for a Cisco router, you would need to know the Cisco IOS command - see your router manual for this.
b). ipconfig /all
Note: there is a space before the forwardslash.
When it returns the parameters, check to see that the IP addresses are all on the same subnet.
This is crucially important for you to take good note. If you are not able to ping a local host or gateway, it's most likely due to this.
c). Ping the Pix Firewall (using its IP address)
d). Ping a remote IP address, e.g. your ISP's gateway or DNS server
e). Is there traffic? If it returns successfully, then ping the other hosts, including the VPN client.
Pix Firewall
Check to see that the Access Control List is configured correctly by ensuring that the IP addresses of the connected hosts have been entered, with the relevant access rights.
Router
Log on to the router. Whilst there:
Ensure that the hosts (computers, etc) are all on the SAME subnet. If they are on different subnets, you must correct the IP addresses to reflect that they are on the same subnet.
Note: If you do really want them to be on different subnets, then you need to use a default gateway.
Hope this helps.
kiwi992.

WM6 won't connect to PPTP VPN over gprs or wifi

Hi,
I am trying unsuccessfully to connect to a PPTP VPN using the VPN client built into my new HTC TyTN II.
Wifi - I can connect using a WinXP SP2 laptop using wifi through my home linksys wireless router (which has PPTP passthrough enabled) using the standard Win XP vpn client. When I try with my TyTN II, I can browse ok but if I set up a VPN connection I get "VPN server problems. Verify your username and password, etc"
GPRS - If I try to connect over GPRS, I connect to Orange GPRS but when it tries to connect to the IP address of my VPN server, I get the same VPN server problem error message. (As a side issue, I asked Orange to enable my account for vpn which they did, sent a SIM update and told me to change my apn to 'internetvpn' instead of 'orangeinternet')
As I can connect through my wifi connected laptop, it seems to point to my WM6 vpn client but my forum searches suggest that the WM6 client works ok. Oh, and yes, I have checked that I am using the correct vpn username and password!
Any thoughts greatly appreciated - the ability to maintain some linux servers was my main reason for getting this phone!
_______________________________________________________
Phone - HTC TyTN from Orange
Windows Mobile 6 Professional
CE OS 5.2.1620 (Build 18125.0.4.2)
Processor QUALCOMM MSM7200-400MHz
Memory 101.63MB
Setings Device Information Version
Operator version 24.181.1.612
ROM Version 1.81.61.2.WWE
ROM Date 09/20/07
Radio version 1.27.14.32
Protocol version 22.45.88.07H
Bump!!! Same problem here. I have all the proper ports open on my router and still no luck.
I've been trying to resolve this with the people that manage my vpn server which is my case is a Watchguard firewall - apparantly Watchguard isn't compatable with PPTP on WM6 and they have suggested using IPSec and have provided me with a client (not that I've got that working yet either!)
I suggest you contact the vendor of your vpn server and ask them whether they are compatable and how a WM6 client should be configured. Post anything you find out here for the benefit of others.
WM6 don't connect to VPN over GPRS/ WiFi
Friends...
I have the same problem... the VPN server is Windows Server 2003... My PDA has WM6 (with in-build VPN client)... then VPN PPTP would work OK... but What is the wrong??
Regards...
I also could not connect on vpn over GPRS and got error message, but after I tested all installed programs I have found out that my SPB GPRS Monitor was the reason for the errors. So I killed it.
Now VPN over GPRS connects and looking into register I see that I am really connected i.e. I got DNS server IP, I got name of the local network and dynamic IP for my HTC, but nothing works. As I have found out from server guys they see me but my dynamic IP is not logged in server DNS, so no program sees me and I can not work.
Can somebody help?
Same
I have a similar problem but the difference is that i don't even receive an error message. When i click connect NOTHING happens!! The wifi i am using is an open network but I must connect to vpn to connect to the internet.
Please help as i really need to get this working...
I have been trying to iron this out with IT at my office as well. I have been trying to get WM6.1 VPN working for nearly a year.
I have a TyTnII and my IT office just bought some kind of WM6.1 Motorola/Sprint Smartphone as well which they actually asked me about setting up for them.
The problem what I am experiencing is that I CAN connect to the VPN server (I use one of the TaskMan progs that has ipconfig built it, and I am getting an appropriate IP from the VPN server). BUT I can't browse ANY intranet sites via PIE or Opera Mobile 9.5. Whenever I try to browse to an intranet site I just get nothing, browser does nothing for ~10min then gives timeout error.
I have heard that this has to do with an inbuilt error in the PPTP module of the VPN client that incorrectly makes VPN server requests using the IP address assigned by the GPRS/EDGE/3G/etc. connection rather than the IP address assigned by the VPN connection, obviously will cause problems!
Anyway, we are investigating 3rd part VPN clients...
Only IPSEC works
I also made many tries to get vpn working over BT PAN profile.
The only configuration which worked for my was IPSEC with the Safenet SoftRemote-LT Client on PC.
With the windows native pptp based vpn does not work .
I got the error code 721 what means that the GRE protocol (frame type 47 on port 1721) does not pass through. This seems to be the the real problem of the packet filtering components of the WM device. The problem is not related to bluetooth or PAN Driver, because it behaves in the same way if you try to do it over USB port. No way.
You guys might want to check out my post about getting my PPTP VPN working and actually syncing ActiveSync on a fixed schedule regularly over VPN.
http://forum.xda-developers.com/showthread.php?t=428878
Getting what you want to work over VPN requires work URL Exceptions so that the traffice is properly routed.
nkitson said:
I've been trying to resolve this with the people that manage my vpn server which is my case is a Watchguard firewall - apparantly Watchguard isn't compatable with PPTP on WM6 and they have suggested using IPSec and have provided me with a client (not that I've got that working yet either!)
I suggest you contact the vendor of your vpn server and ask them whether they are compatable and how a WM6 client should be configured. Post anything you find out here for the benefit of others.
Click to expand...
Click to collapse
Watchguard does support PPTP, your IT guys just need to configure it. As for IPSec which would be awesome because there is an app call Greenbow that will connect you over 3G doesn't work with Watchguard. You can only connect using their own client for it which needs a license and isn't support on Windows Mobile. They got a hate email from me for that crap.

Categories

Resources