Hi All,
been reading and searching for info but still cant find the relevant stuff..... Okay, can I connect my PC to my XDA and use the internet via GPRS? I have done this years ago using another phone but for the life of me I can't work it out :shock:
Can someone tell me the procedure for this? At the moment I surf around on the XDA but would rather just link the PC to it.
Cheers,
Gary
here's some notes i wrote myself about how to use the phone as a modem over bluetooth.
How to for bluetooth modem.
(1. Delete both blutooth profiles on the devices
2. On the pda go Start -> settings -> System -> bluetooth settings, and tick both incoming and outgoing port options.
3. Create a bluetooth connection.)
4. Go to the wireless modem on the pda, choose bluetooth in the drop down box, and click start
5. click the ariel bit, and connect to gprs
6. on the laptop double click the xdaII dial up connection, and make sure the bluetooth modem #3 is chosen
7. click dial. done!
Click to expand...
Click to collapse
if you have both incoming and outgoing ports on the xda ticked, then in your bluetooth setting on the pc, you should be able to go to the bluetooth devices window, click the devices tab, select your pda, click the properties button at the bottom of the window, then in the resulting window click the services tab. make sure DUN (dial up netowrking.. i think this is one of hte options there) is ticked, and click ok. it should install a bluetooth modem driver thing in your network connections. this is the modem you use to dial out. you'll have to create your own dial up conenction using this bluetooth modem, i think it should be pretty standard, make the number to dial *99#. just incase you have problems with this modem, here's the settings of mine:
Bluetooth modem details (Standard Modem over Bluetooth link #4):
Driver tab, Driver details:
C:\WINDOWS\system32\DRIVERS\bthmodem.sys
C:\WINDOWS\system32\DRIVERS\modem.sys
Advanced tab: there are no extra initialisation commands. in the advanced port settings button it uses FIFO, the transmit and recieve are set to highest, and its set to COM12
Modem tab: speed is set to 115200
General Tab: Device Type: Modems, Manufacturer: Standard Cell Phones, Location: on Bluetooth Device (RFCOMM Prodtocol TDI)
Dial up connection details (XDAII):
Username: O2Web
password: blank (i think)
Properties button:
Advanced tab, settings button: firewall is off. ICS is unticked.
Networking tab: TCP/IP is on, QoS is on, Deterministic ntwork enhancer is on, novell client for windows is on. rest is off
Security tab: Typical (recommended settings) is chosen, in the dropdown box "allow unsecured password" is selected. everything else is not selected.
Options tab:
Display progress while connecting: on
Promopt for a name and password, certs, etc: on
Include windows logon domain: off
Prompt for phone number: on
Redail attemps: 3
Time between redial attemps: 1min
idle time before hangup: 20mins
redial line if dropped: on
General tab: Modemm - standard modem over bluetooth link #4 is the only one selected
configure button, max speed is 115200, all tick boxes are off
all devices call the same number: on
Phone number: *99#
use dialing rules: off
show icon on notification area when connected: on
Click to expand...
Click to collapse
princegary said:
Hi All,
been reading and searching for info but still cant find the relevant stuff..... Okay, can I connect my PC to my XDA and use the internet via GPRS? I have done this years ago using another phone but for the life of me I can't work it out :shock:
Can someone tell me the procedure for this? At the moment I surf around on the XDA but would rather just link the PC to it.
Cheers,
Gary
Click to expand...
Click to collapse
http://www.my-xda.com/downloads/SettingUp_XdaII_s_i_modem.pdf
On the UK Xda site.
Easy really
Thanks guys will have a go when I get home.
you guys ROCK!!!!!
guys i dont know if this was posted already but im having a problem with the file transfer service on my xda 2 upgraded to wm2003se (by xdajojo). ive tried to send files and pictures to my xda 2 from a computer and my nokia phone but the sending fails. a window says from my pc that file transfer service is not found on my xda 2. pls help. thanks in advance!!!
Have you checked the settings of the bluetooth as it is possible to change the status and turn the file transfer off.
try this but I thought 2003se wasn't on the XDA II just the XDA IIi?
usually you'll get this error if bluetooth it set up correctly, but "recieve all incoming beams" is unticked.
to tick it go
start -> settings -> connections tab -> Beam
and tick "receive all incoming beams"
then try again.
be aware that having this option ticked does use up more battery (even when your phone is idle and not receiving and files/data), so its a good idea to untick it once you've finished sending or receiving files.
Hello 4 all, my firs post
Its for BT version 1.2
In PC trey BT icon push right butom > BT setup wiz. > "I want to find ..." > "Next" (beefore on HTC Wizard: turn ON BT , in BT settings make discoverable to other devices & erase old conections with devices "PC") > take "BT device " > "Next" > Pin code "..." > Initiate Paring > ... > enable ActiveS (Com20) > Finish > on HTC active AS & Dialup "Finish" > open ActiveS > Connection set. > Allow con. to "com20" (not allow USB) "OK" > On HTC disabled BT > On HTC "Comm Menag." push ActiveS > menu > con. via BT > Yes > COM ports > New Outgoing port > "PC" > > com7 > finish > device > take PC > "ok" > go go go
if not conected, try again after 10 sec. ">menu > con. via BT"
It`s working 99%<[/b]
i do it and nothing ...
Why incoming 7... it´s on local services or client aplication ?¿?
and i don´t show on the ppc the activesync services of the pc ?¿?
miguelromerom said:
i do it and nothing ...
Why incoming 7... it´s on local services or client aplication ?¿?
New Outgoing port !!!!
and i don´t show on the ppc the activesync services of the pc ?¿?
Click to expand...
Click to collapse
In PC trey BT icon push right butom > > BT setup wiz. > "I want to find ..." > "Next" (beefore on HTC Wizard: turn ON BT , in BT settings make discoverable to other devices & erase old conections with devices "PC") > take "BT device " > "Next" > Pin code "..." > Initiate Paring > what u see in "BT service selection"?
I have: ActiveS; Dial-up; OBEX ...; Voice Get.
I install AciveS and then BT soft.
[/b]
YES I´VE the same on the pc, but the ppc don´t dectect the AS service over PC
miguelromerom said:
YES I´VE the same on the pc, but the ppc don´t dectect the AS service over PC
Click to expand...
Click to collapse
Which moment U don't see:
On HTC disabled BT > On HTC push ActiveS > con. via BT > Yes > COM ports > New Outgoing port > "PC" > NEXT > com7 > finish > device > take PC >
take pc ?¿? why port 7
regards
miguelromerom said:
take pc ?¿? why port 7
regards
Click to expand...
Click to collapse
One moment, I need to try one idea!!!
ok thanks
miguelromerom said:
ok thanks
Click to expand...
Click to collapse
1)On HTC BT setings delete device "PC"
2)on PC in Windows Explorer unpair your device "HTC"
3)read my 1 post and try it! I liltle bit change it & try 3time, all works
Good luck
THANKS OF NEW BUT NOTHING
I HR the pda and reinstall AS and BT SW
Thanks
I'm not sure what i did but it works - that's all what counts
By the way - what is BT soft ?
mine is widcomm
regards
did you use comport 20 for you activesync connection?
no i haven´t got 20 port available ...
thanks of new
I think I've got it
But it's a little tricky
1. Delete all connections on Pc and PPC
2. Start the Setup-Assistent and choose I want to find
3. Initiate Paaring
4. Choose ActiveSync without secure connection.
5. Set com20 if possible.
6. Please go to your ppc properties on your pc and allow active sync
If you coose com20 you can quit here, if not try this:
7. Start->Run->Regedit
8. HKEY_CURRENT_USER\Software\WIDCOMM\BtConfig\Services\
9. Search the folder with Name=ActiveSync (I have 0010)
10. Change the ComPortNumber to 20.
11. Search with your PPC the services on your pc and take activesync
12. Go to the preferences of your bluetooth-enviroment of your pc and take the tab local services. Now change the com-port number of your activesync service to an existing one (I have 4).
Now it should work
km
What if my computer does not show Activesync as a bluetooth option. I can get PIM synchronization but no Activesync. How do I go about adding Activesync as a service my computer can use?
I think the Activesync service is nothing else then a serielle connection called "ActiveSync" with com-port 20. Just create this on manually.
i think tomorrow we have a new rom version, a uninstall AS, and HR to the ppc, then i do this test...
thanks
I have the same problem, when I try to connect from the PPC it says there's no partnership with an AS enabled PC. And when pairing / updating services, the PPC sees serial and handsfree services on the PC, but no AS. Partnership is established, it works fine over USB.
Like miguelromerom I also use the Widcomm stack. Mine is urrently version 5.0.1.1400. I tried several older versions as well.
On the PC I have an incoming bluetooth serial port at COM 4, which is named "My ActiveSync". Secure connection not checked. AS 4.1 is set to allow connections on COM 4. The service on the PC is active.
On the PPC I had optionally configured serial ports: incoming (7), and outgoing (6) to the PC. Set the non secure. Though I'm not sure if either of them is required. I suppose we're all agreeing the port numbers on the PPC bear no relation to the port numbers on the PC?
km said:
7. Start->Run->Regedit
8. HKEY_CURRENT_USER\Software\WIDCOMM\BtConfig\Services\
9. Search the folder with Name=ActiveSync (I have 0010)
10. Change the ComPortNumber to 20.
......
12. Go to the preferences of your bluetooth-enviroment of your pc and take the tab local services. Now change the com-port number of your activesync service to an existing one (I have 4).
Click to expand...
Click to collapse
I also tried this. I still see no AS service from the PPC when doing this. It is not possible to select COM20 in the AS 4.1 connection settings.
Eric
ActiveSync via Bluetooth
I am not sure how it will go with Wizard, but with Magician it help me.
I found this step, but I forgot the origin. So actually no permission from the author. I share this with hope can help others. Hopefully the author understand.
-----
1)On your PC go to the Control Panel and select "Bluetooth". In the "Options" tab, make sure all the ticks are on. You'll now see a little bluetooth icon on your system tray. Makes it easier to access in the future. Your PC should also be ready to be found as long as you ticked the fist box in the step above.
2)On your Jam, Go to Start, Settings, System (Tab), Bluetooth Settings. On the screen that comes up you ONLY want to hit start. Leave the incoming and outgoing checkboxes OFF!!!
3)You will now be taken to the partnership screen, where you just follow the instructions to add your PC. Follow through until you hit finish. Close everything down until you're back at the today screen.
4)Back to your PC, double click on the Bluetooth icon in your system tray. Go to "Com Ports" (Tab) and click "Add". Choose incoming. A You'll see an incoming port added to the list (probably be the only item there). It should look like "COM X Incoming"
Remember what number is after COM. Close all windows, making sure you hit OK or Apply where you have to.
5)Open Active Sync on your PC. Hit File, Connection Settings. Enable the first tick, and select the COM port you had to remember in the previous step. Hit OK
6)Open Active Sync on your Jam. Choose Tools, Connect Via Bluetooth.
-----
Regards,
Arto.
Hi
I've been looking through the forums and can find plenty to solve bluetooth transfer problems, but I am after the opposite. I am trying to lock out access to the following, but can't find anything on the web (unless I have missed it).
Comm Manager (icon on PPC Desktop)
Bluetooth (from Settings -> Connections menu too)
Wi-Fi (from Settings -> Connections menu too)
MMS - if this is possible
PocketMSN
Beam (from Settings -> Connections menu)
Wireless LAN (from Settings -> Connections menu)
Also, if possible, does anyone know how to hide the shortcut for the 'Clear Storage' option, or hiding the passcode it asks for so you still have to enter it, but it doesn't tell you what to enter?
Any help would be gratefully received.
Thanks in advance
Hi,
Got N5800, N95 and HTC HD2, although I set everything right, I cant send files from and to my HTC. No problems wit 2 Nokias. My HTC can see both Nokias and they see HTC but can't connect, it says connection failed.
Am with UK o2 rom 1.72, any ideas?
Cheers
up.................
In
Settings -> Menu -> All Settings -> Bluetooth
There is the 'gears' icon section (left tab)
Go to Advanced -> File Transfer and tick
"Allow Incoming File Transfer connections"
Press 'Done'
Then:
Press 'Object Exchange'
and tick "Allow this device to receive objects"
Press Next, then Done.
Thx a lot, working fine now