For some reason my device has suddenly started switching to the minimum backlight setting whenever it's switched on. If I go to the backlight settings and then adjust the slider it will stay at the selected brightness until it switches off. When it switches back on again it's at minimum brightness and I can hardly see the screen!
This started happening after I installed and then removed PocketZenPhone.
I don't really want to hard-reset the device unless I absolutely have to - does anyone know what registry key sets the default switch-on brightness?
Thanks,
I dont have the solution but I have had the same problem intermittently. Can be really aggravating in the dark because it can be hard to get to the proper screen to increase the backlight. Hasnt happened in a while. Have not been able to figure out what triggers it. Have not installed PocketZenPHone. Curious if anyone has an explanation.
yah, i've noticed this to, sometimes i'll hit the power button to take it off standby and the backlight would be off. first couple of times it scared the hell out of me cuz i thought the screen had broke or burnt out.
also i noticed the version of spb pocket plus i'm using (3.04 build 4195) doesnt adjust the backlight brightness.
Now that you mention it. the SPB Pocket plus backlight does not work for me either. Strange...
Well I think I've managed to "fix" this by setting the following;
Backlight Settings:
On battery power, turn off backlight if device is not used for [5 min]
Turn on backlight when a button is pressed or the screen is tapped
Power Settings
On battery power: Turn off device if not used for [3 minutes]
I think the key thing here is to have the device auto-switch-off BEFORE the backlight timer kicks in. Since setting the above three settings I have not had the same problem again.
Ill give it a try as well.
Hmm...maybe someone can help me. One day, my backlight timer settings when the PDA's not plugged in reset to 10 seconds (in the registry it has it as 7 seconds). I'll go in and change it to 2 minutes (the original setting I had it at), but the minute I turn it off, it resets back again to the 10 seconds setting. I even tried going into the registry and changing it, and it resets it back to 10 seconds. I suspect it may have something to do with an entry in the "scheduled tasks" but it looks like a complete mess. Is there some kind of scheduled tasks cleanup utility?
Thanks,
Q
hello i have the same problem using phothet with WM6
Thanks
Nicolas
I had the same problem often about 15 months ago - it happened often each day.
I posted herw but had no joy with a solution - but then found one on Modoco (i was looking about March/April 2006).
Even with that - it has still done if perhaps five or six times since - and basically makes the phone unusuable if it happens somewhere or time with poor light.
My KJam backlight keeps changing by itself to dark
Suddenly my KJam backlight always turns to low without me doing so, then I have to change it to high, barely can see what I’m doing as it is almost black. This is kept happening especially after I installed Pocketweather. I reinstalled the Rom, it worked fine then suddenly it is back again when I switch the screen off, or automatically it is switched off, the backlight slider I find it at the lowest end.
Why thus is happening, it’s driving me crazy, please help me
Anyone know how to get the backlight back to the original setting? I tried to go into Settings to Battery Icon and clicked on Backlight and adjusted it there but everytime the phone goes into sleep mode, the backlight always reverts to power saver mode and I cant see a damn thing on my screen. It is very frustrating...anyone know how to correct this problem? Am I doing something wrong???? TIA....M3
I have the same problem, but in my Wisard the problem happens when a soft reset is executed ... I was searching about it on the internet and I found that maybe the problem is an incopatibility between the fone and the SPB Pocket Plus backlight functionality ... I will try to uninstall the SPB to see what happens ...
Here's my backlight bug theory...
On the Wizard there are problems with any programs that try to change the backlight settings and often the result is they end up turning it off.
PocketZenPhone, PhoneAlarm and SPB Pocket Plus all have features to control the backlight (do you have the backlight plugin installed on your today screen?) that load at boot, or on the Today screen, and these seem to cause problems.
I use PhoneAlarm and have problems on occasion. Believe it or not I found the solution was to tell PA to set the backlight at 40% which it can't be set to on the Wizard (25% increments only) and it stops shutting it off. If I have it set for 50% (which *is* valid on the Wizard) it shuts it off.
Anyway this is my theory on the mysterious backlight bug, if anybody else has any other ideas, I'd love to hear them.
-JMS
If you go to the backlight applet and check the Turn on backlight when a button is pressed or the screen is tapped on both the Battery Power and External Power tabs you should be all set. Had the same issue after the last iMate ROM update and this is what fixed it.
Hope it works for you. Good luck.
db
Hi,
I have upgraded my 9100 with QTEK latest ROM update (2.17.7.6FRE).
Since then, I have difficulties setting the power and backlight settings. They seem to be overriden sometimes.
I want my phone tu turn to stand by after one minute when battery powered, but it doesn't. Backlight switches off after 30s OK, but the phone stays on.
It seemes to be related, but sometimes the backlight settings is reset to 0 (no backlight) and I have to open the control panel to reset it to middle.
Anyone has an idea?
Tahnks in advance,
Guillaume
Hello everyone,
After installing HTC Cube and HTC Album, after the set timeout the backlight dims all the way down to zero, so I have to go into the settings, system, backlight and then set it to the desired brightness again and after the timeout, it will go to fully dimmed. If I use the power button to put the phone into sleep mode, this issue does not occur. I've since uninstalled the above named programs but the issue persists.
Any ideas?
anyone?
Searched and searched but couldn't find an answer.
As the title says.... I can still see the display is on and its responding to my inputs but no backlight at all.
Have tried adjusting all backlight options disabling and enabling them to no avail.
always start to happen at 50% power then every 5 or so secs it turns off so i need to press the power button twice to turn it on again but have it turn itself off if i left it to idle for more than 5 secs.
Settings currently for on battery at dim backlight 30secs, power off 1min. on AC dim at 1min, power off at 10mins
Comforting thing is when playing videos with coreplayer, backlight remains on.
Anybody any ideas?
started when i flashed back to official 1.66 after mtty and now am on merlion 2.4 also after mtty. could it be that i always flash at the 50% to 60% power mark??
Currently draining my batt to see if it is the batt sensor's problem....