Hello everyone,
After installing HTC Cube and HTC Album, after the set timeout the backlight dims all the way down to zero, so I have to go into the settings, system, backlight and then set it to the desired brightness again and after the timeout, it will go to fully dimmed. If I use the power button to put the phone into sleep mode, this issue does not occur. I've since uninstalled the above named programs but the issue persists.
Any ideas?
anyone?
Related
For some reason my device has suddenly started switching to the minimum backlight setting whenever it's switched on. If I go to the backlight settings and then adjust the slider it will stay at the selected brightness until it switches off. When it switches back on again it's at minimum brightness and I can hardly see the screen!
This started happening after I installed and then removed PocketZenPhone.
I don't really want to hard-reset the device unless I absolutely have to - does anyone know what registry key sets the default switch-on brightness?
Thanks,
I dont have the solution but I have had the same problem intermittently. Can be really aggravating in the dark because it can be hard to get to the proper screen to increase the backlight. Hasnt happened in a while. Have not been able to figure out what triggers it. Have not installed PocketZenPHone. Curious if anyone has an explanation.
yah, i've noticed this to, sometimes i'll hit the power button to take it off standby and the backlight would be off. first couple of times it scared the hell out of me cuz i thought the screen had broke or burnt out.
also i noticed the version of spb pocket plus i'm using (3.04 build 4195) doesnt adjust the backlight brightness.
Now that you mention it. the SPB Pocket plus backlight does not work for me either. Strange...
Well I think I've managed to "fix" this by setting the following;
Backlight Settings:
On battery power, turn off backlight if device is not used for [5 min]
Turn on backlight when a button is pressed or the screen is tapped
Power Settings
On battery power: Turn off device if not used for [3 minutes]
I think the key thing here is to have the device auto-switch-off BEFORE the backlight timer kicks in. Since setting the above three settings I have not had the same problem again.
Ill give it a try as well.
Hmm...maybe someone can help me. One day, my backlight timer settings when the PDA's not plugged in reset to 10 seconds (in the registry it has it as 7 seconds). I'll go in and change it to 2 minutes (the original setting I had it at), but the minute I turn it off, it resets back again to the 10 seconds setting. I even tried going into the registry and changing it, and it resets it back to 10 seconds. I suspect it may have something to do with an entry in the "scheduled tasks" but it looks like a complete mess. Is there some kind of scheduled tasks cleanup utility?
Thanks,
Q
hello i have the same problem using phothet with WM6
Thanks
Nicolas
I had the same problem often about 15 months ago - it happened often each day.
I posted herw but had no joy with a solution - but then found one on Modoco (i was looking about March/April 2006).
Even with that - it has still done if perhaps five or six times since - and basically makes the phone unusuable if it happens somewhere or time with poor light.
My KJam backlight keeps changing by itself to dark
Suddenly my KJam backlight always turns to low without me doing so, then I have to change it to high, barely can see what I’m doing as it is almost black. This is kept happening especially after I installed Pocketweather. I reinstalled the Rom, it worked fine then suddenly it is back again when I switch the screen off, or automatically it is switched off, the backlight slider I find it at the lowest end.
Why thus is happening, it’s driving me crazy, please help me
Anyone know how to get the backlight back to the original setting? I tried to go into Settings to Battery Icon and clicked on Backlight and adjusted it there but everytime the phone goes into sleep mode, the backlight always reverts to power saver mode and I cant see a damn thing on my screen. It is very frustrating...anyone know how to correct this problem? Am I doing something wrong???? TIA....M3
I have the same problem, but in my Wisard the problem happens when a soft reset is executed ... I was searching about it on the internet and I found that maybe the problem is an incopatibility between the fone and the SPB Pocket Plus backlight functionality ... I will try to uninstall the SPB to see what happens ...
Here's my backlight bug theory...
On the Wizard there are problems with any programs that try to change the backlight settings and often the result is they end up turning it off.
PocketZenPhone, PhoneAlarm and SPB Pocket Plus all have features to control the backlight (do you have the backlight plugin installed on your today screen?) that load at boot, or on the Today screen, and these seem to cause problems.
I use PhoneAlarm and have problems on occasion. Believe it or not I found the solution was to tell PA to set the backlight at 40% which it can't be set to on the Wizard (25% increments only) and it stops shutting it off. If I have it set for 50% (which *is* valid on the Wizard) it shuts it off.
Anyway this is my theory on the mysterious backlight bug, if anybody else has any other ideas, I'd love to hear them.
-JMS
If you go to the backlight applet and check the Turn on backlight when a button is pressed or the screen is tapped on both the Battery Power and External Power tabs you should be all set. Had the same issue after the last iMate ROM update and this is what fixed it.
Hope it works for you. Good luck.
db
Perhaps someone has an explanation why my backlight doesnt light up again when a button is pressed?
From time to time, the backlight goes dark and even though I am pressing buttons, screen, power button, etc, the backlight doesnt come back on. I have to search for the backlight adjuster (in the dark) in order to switch the light back on.
I have wisbar advanced and SpbPocketPlus installed - might that effect this somehow??
Thanks for any advice!
i have exactly the same problem and don´t know a solution. ;-(
Wisbar Advance 2.6.0.1 is installed, SpbPocketPlus not.
I think it comes more often if i use the camera, but it is not reproduceable...
I've never had this problem before, I dont have wisbar installed.
You may be doing a press and hold function on your device. Quick press of the power turns it off, a long press turns off the backlight. the only way to turn it back on is to long press the power button.
also you have settings that turns the back light screen off, which may be affecting this.
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Squuiid said:
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Click to expand...
Click to collapse
It hasnt happened lately (actually ever I posted this thread strangely enough) but its quite embarrassing when you have to find your way through a dark screen.
I put a large symbol of the brightness adjuster in one corner (using SpbPocketPlus), so I only have to find that symbol rather then start --> settings --> etc..... its not a cure but it makes it easier switching it back on.
If anyone has a remedy for this problem, please share...
Not sure why this happens, but I fixed it using...
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
This app - run on your prophet, and all is back to normal. Keep a copy on your SD card...
--Tosh
didn't help
I tried and still use the neo backlight fix. But this fix is only for forcing via startup a longer measured time for the light to stay on.
I too have suffered with the problem of the backlight not coming on every now and again after starting up the prophet. I've had this problem on numerous roms too which is interesting. What more interesting is that even in the days of my owning a Blue Angel (Orange M2000, MDA) I STILL remember having this intermittent problem with the light not always coming on. Only way I fixed it was to simply soft reset the device. Whenever I did that and when I do it now, it stops it happening for week or so at least.
I still use the neo back light fix too as my phone has the quick light turn off problem without it. Neo certainly created a good fix no mistaking.
All the best
Nicholas
i had the same problem...just put the same value to the standby and backlight ...( both 3 mins on mine)...and never happened again....i think it helps...
I have a strange backlight & power-off problem on my Qtek S200:
When the backlight is switched on and I press the Power button shortly to switch it to sleep mode, the screen gets blank but the backlight does not go off.
So now I wait first when the backlight timer goes off before switching the device to sleep mode manually.
Another problem:
When the power settings is set to switch the device off automatically, it reboots when the timer goes off. So my solution is to disable the auto power-off feature.
How to fix this to the original behaviour ?
I tried the neo_backlight_fix and set the backlight timeout to the same value as the standby timeout, but with no avail.
My Qtek S200 has still the original old ROM (G4 model) and Windows Mobile 5.0:
ROM version info:
IPL: 2.10.001
SPL: 2.10.001
GSM: 02.07.20
OS: 2.10.7.25
Please help me to solve the problem.
Maybe I messed up a lot and the only solution is to install a newer ROM which is available since some time at qtek.nl.
Thanks in advance.
Hi,
weird thing here: Always when I awake the device after suspend, the backlight is off. I have PZP installed, but it's configured to do nothing to backlight or power, settings in backlight/power are to never switch off backlight, but suspend after 2 minutes.
Any ideas where else I could check?
after mr.clean update, my backlight auto set itself to turn off after 10sec no matter what i do
I tried to set the back light to never turn off, but it still will not work
all i have running on background is spb pocket plus
CAN ANY HELP?????
hm, also mr. clean here.. coincidence?
My out of the box MDA Vario did this too. I finally figured out that it only did it if I changed the brightness level from the default to max. If I left it at the default, it worked fine on resume...
before the mr. clean rom I had a standard vodafone one, and didn't have the problem. What is default level (steps from topmost) for testing?
TauTau said:
hm, also mr. clean here.. coincidence?
Click to expand...
Click to collapse
ok, i THINK i solved it now
it is caused by a software called vito audio note
http://www.pocketgear.com/software_detail.asp?id=21235&associateid=17
which will uses its power saving mode to turn off Wizard
I had the same problem. Rebooting the device didn't fix it. But when I actually SOFT-resetted the device, it came all back to normal.
Backlight off on resume, not hardware
Hello everyone,
I've got a very frustrating problem. Here's the summary:
My backlight doesn't come on when I resume from standby. However, when I soft-boot the backlight behaves as normal. After boot, if I continue pressing keys to prevent the backlight from turning off, then it operates as normal. However, if the backlight times-out, or if I put it in standby, the backlight refuses to come back on.
Any suggestions?
I bit the bullet
Well, i finally decided I couldn't live with the dark screen anymore and Hard Reset my 8125. It fixed the problem, but now I have to reload everything.
Oh well, now will be a good time to upgrade my ROM I guess...
Currently running May 1st Energy ROM, having an issue where regardless what settings I put for battery light settings (2 minute timeout) it always goes back to 10 seconds...any ideas?
Another issue is the problem with the stock lock screen...I want to completely disable it (both slider and soft key screen locks). I was using S2U2 But it causes double slide screen locks...