Hi.
First of all I want to apologize for the new topic about igo but i´m despered.So please culd anyone give here a functional link on latest version of IGO 8 for xperia x2? ... please help me
THX
edited...
just extract and copy to Storage Card and modifie sys.txt
[device]
type="alias_xperia"
sdcard_dsk_num=7
doesn´t work ... and it´s arabic or what ... but thank you anyway
Eng and Ar, and work fine with me
try this one with map of MEA
deleted...
the problem is that even when I rewrite the sys.txt just like you said it doesn´t work igo start but only on the half of the screen and it is impossible to do anything
if u have another folder with name iGO8 on Storage Card just rename it (navngo if u want)
program application database cannot be found.please insert original application sd card. ... that´s what it writes when I tried another link with IGO you gave me. ...don´t know what to do ... I had omnia before and it was way easier than with the xperia ...
I´ve been doing this for about whole day i´m trying to run igo on xperia but no luck yet ... i´m getting tired and angry .. ****y xperia
Plz, don`t give here links to warez software. If you are angry, I hope your head explose. Another way is to buy IGO.
hier is my igo sys text for me its working
[project]
name="igo8_pda"
[folders]
app="/Storage Card/iGO8"
sdcardpath="/Storage Card/iGO8"
[sound]
mute_os_key=1
use_os_volume=0
ding=0
[route]
correctness=90
[device]
sdcard_dsk_num=7
[interface]
maxzoom2d=6000000
show_exit=1
show_minimize=0
skin="ui_igo8"
;resolution_dir="800_480"
;screen_x=800
;screen_y=480
vga=1
wide=1
recalc_voice=0
mapfontscale=200
drive_carefully=0
popup_info=1
laneinfo_signpost_enabled=1
shutdown_time=0
show_orientation=1
defaultzoom3d=40
[rawdisplay]
highres=0
autoconfig=1
;screen_x=800
;screen_y=480
;class="auto"
driver=gdi
[sound.announcer]
gps_disconnected=0
gps_signal_lost=0
[3d_config]
disable_roadsign_navigation_mode=0
roadsign_lines_per_screen=18
rotated_roadsigns=0
[3d]
show_guidance_arrows=1
show_guidance_strip=1
[map]
2dheadup=1
show_oneway=1
3d_max_tiltlevel=8900
3d_default_tiltlevel=8900
map_mode="3D"
show_labels=1
textured_poly=1
3d_scale_carmodel=1
3dcarsizemin=3000
3dcarsizemax=4000
3dcarsizemul=10000
[feature]
signpost_coloring=1
[smartzoom]
restore_smartzoom_on=1
enabled=1
enabled2d=1
minangle=70
maxangle=81
[timezone]
;sync_os_timezone=0
;reset_os_timezone=0
[debug]
;show_device_type=1
;disable_outlookpoi=1
show_oneway=1
show_oneway_3d=1
show_speed_limit=1
show_lane_info=1
skip_eula=1
enable_roadshadow=1
show_arrows_on_route=1
speedcam_enabled=1
freeze_result_time=0
sound_q_length=200
queue_length=200
[gps]
set_messages=0
[warning]
speedcam_visualtype=1
speedcam_soundtype=2
speedcam_snap_distance=200
speedcam_max_lookahead=600
speedcam_maxdistance_from_road=10
[navigation]
skip_grab_viewchanging=1
sim_speed_factor=3
show_current_city=1
show_countrychange=1
[msnd]
;enabled=0
Click to expand...
Click to collapse
and which version of igo do you have? nightplayer32
Tomas_s1104 said:
and which version of igo do you have? nightplayer32
Click to expand...
Click to collapse
I use 8.3.4.117940
program application database cannot be found.please insert original application sd card... again ... I downloaded the version 8.3.4.117940 than rewrote the sys.txt exactly just like you posted me ...I deleted the text that was in original sys.txt than I copied the text you gave here in to sys.txt saved it than copied on my storage card ... and it´s not working it says ..program application database cannot be found.please insert original application sd card ... i´m despered
This is what is written on my sys.txt:
[folders]
app="%SDCARD%/iGO8"
[device]
type="alias_xperia"
[gps]
source="virtserial"
[interface]
maxzoom2d=6000000
show_exit=1
i had the database error once and it's because i wrote the wrong path in [folders] so iGO8 cannot find its files. check where your igo folder is and change accordingly at app="...".
Tomas_s1104 said:
program application database cannot be found.please insert original application sd card... again ... I downloaded the version 8.3.4.117940 than rewrote the sys.txt exactly just like you posted me ...I deleted the text that was in original sys.txt than I copied the text you gave here in to sys.txt saved it than copied on my storage card ... and it´s not working it says ..program application database cannot be found.please insert original application sd card ... i´m despered
Click to expand...
Click to collapse
Stop your asking about warez software. I must banned you. Your software is not original. Your data.zip is wrong.
I tought that you guys are here to give advice and help other people but instead of it you bann me ... ok whatever...
Tomas_s1104 said:
program application database cannot be found.please insert original application sd card... again ... I downloaded the version 8.3.4.117940 than rewrote the sys.txt exactly just like you posted me ...I deleted the text that was in original sys.txt than I copied the text you gave here in to sys.txt saved it than copied on my storage card ... and it´s not working it says ..program application database cannot be found.please insert original application sd card ... i´m despered
Click to expand...
Click to collapse
you have to change the programm path at the beginning of the sys
[folders]
app="/Storage Card/iGO8"
sdcardpath="/Storage Card/iGO8"
Click to expand...
Click to collapse
on my sd card i use a folder called IGO8 and in this folder there is the Igo8.exe
if your folder is called IGO you hafe to change the foldername or the sys
oh I got it .. igo gets started but another problem ... it fells down because .. INITIALIZATION error: no language files were found ... what is that suppose to mean? oooh...
Tomas_s1104 said:
oh I got it .. igo gets started but another problem ... it fells down because .. INITIALIZATION error: no language files were found ... what is that suppose to mean? oooh...
Click to expand...
Click to collapse
Zum letzten Mal, du Arsch, hier ist nicht der Support von geklauter Software.
Ich schreibs dir besser in Deutsch, weil in Englisch verstehst du es scheinbar nicht. Du bringst die Forenbetreiber hier total in rechtliche Schwierigkeiten. Wende die mit deiner geklauten Software an sonst wen, oder kauf IGO8. Damit wird auch der Lohn der Arbeit umgesetzt.
Tomas_s1104 said:
oh I got it .. igo gets started but another problem ... it fells down because .. INITIALIZATION error: no language files were found ... what is that suppose to mean? oooh...
Click to expand...
Click to collapse
Zum letzten Mal, du Arsch, hier ist nicht der Support von geklauter Software.
Ich schreibs dir besser in Deutsch, weil in Englisch verstehst du es scheinbar nicht. Du bringst die Forenbetreiber hier total in rechtliche Schwierigkeiten. Wende die mit deiner geklauten Software an sonst wen, oder kauf IGO8. Damit wird auch der Lohn der Arbeit umgesetzt.
6. Do not post warez.
If a piece of software requires you to pay to use it, either pay or find your cracks and serials somewhere else. We do not accept warez nor do we permit any member to promote or describe ways in which Warez, cracks, serial codes or other means of avoiding payment, can be obtained.
Related
Hello,
I messed up one section of the registry:
HKLM/software/microsoft/inbox/svc
and "Messaging" isn't starting any more. Could someone export this branch of the registry any upload it?
Thank you very much,
Klaus
Grüße
Danke,
jetzt geht es wieder.
Gruß,
Klausi
For those who have no problem with english but prefer german input:
This Cab changes the following to german:
- Softkeyboard (including help)
- Word-Completion
- Spell check
- Auto correction
- Transcriber (optional)
The rest of the Rom stays english!!!
Details in the readme:
Code:
ZakMcRofl's German Input for WM6 (May 2007)
===========================================
Über dieses Cab / About this Cab
================================
Dieses Cab wurde von mir erstellt, da es momentan kein deutschsprachiges WM6-Rom für den HTC Trinity gibt.
Grundsätzlich sollte es auch für andere Roms und Geräte funktionieren, entwickelt wurde es aber für
LVSW_Trinity_WM6_v2.x.x.x (WM6 für Trinity, erstellt von LVSW)
Dieses Cab stellt im WM6-Rom folgende Aspekte auf deutsch um:
- Softkeyboard (inklusive Hilfe)
- Wörter-Vervollständigung
- Rechtschreibprüfung
- Autokorrektur
- Transcriber (optional)
This Cab was created by me because there is no german WM6-Rom for HTC Trinity devices.
It should work for other WM6 Roms and devices but it was developed for
LVSW_Trinity_WM6_v2.x.x.x (WM6 for Trinity, created by LVSW)
This Cab changes the following to german:
- Softkeyboard (including help)
- Word-Completion
- Spell check
- Auto correction
- Transcriber (optional)
Installation
============
- Für Roms, bei denen es noch nicht vorhanden ist, muss zuerst sipchange installiert werden:
http://www.pdagold.com/software/detail.asp?s=1312
Bei LVSW ist es dabei.
- "German Input for WM6 by ZakMcRofl.cab" aufs Gerät kopieren und ausführen
- Gerät wird automatisch neugestartet
- Unter "Settings -> System -> Regional Settings" auf Germany stellen
- (optional) "German Transcriber by ZakMcRofl.cab" aufs Gerät kopieren und ausführen (braucht etwa 1 MB)
- For Roms that don't include it, sipchange has to be installed
http://www.pdagold.com/software/detail.asp?s=1312
Its included in the LVSW Rom
- Copy "German Input for WM6 by ZakMcRofl.cab" to the device and run it
- Device is reset automatically
- Under "Settings -> System -> Regional Settings" switch to Germany
- (optional) Copy "German Transcriber by ZakMcRofl.cab" to the device and run it (requires about 1 MB)
Unterstützung / Support
=======================
Ich habe einen Thread im XDA-Developers Forum eröffnet,
in dem ihr eure Fragen und Anregungen posten könnt. Bitte in englisch!
http://forum.xda-developers.com/showthread.php?p=1249910
Diskussionen auf deutsch bitte hier:
http://www.ppc-welt-community.info/community/showthread.php?p=877539
I opened a thread on the XDA-Developers Forum where you can post your questions
and suggestions. English only please!
http://forum.xda-developers.com/showthread.php?p=1249910
Discussion in german here:
http://www.ppc-welt-community.info/community/showthread.php?p=877539
Danksagung /Credits
=====================
Ein herzliches Dankeschön an
- ovosleep fürs dumpen seines WM6 Roms womit er dies alles erst ermöglicht
- LVSW und mun_rus für die ersten WM6 Roms für Trinity
- Bepe für die deutschen Sprachdateien
- querschlaeger für die Idee und die Inspiration
- alle die ich hier vergessen habe - sorry
Credits fly out to
- ovosleep for dumping his WM6 rom and making all of this possible
- LVSW and mun_rus for putting so much work into the first WM6 Roms for Trinity
- Bepe for the german language files
- querschlaeger for the idea and inspiration
- everyone else I forgot here - sorry
uploaded...
Apparently there isn't that much interest in localized input.
I realize this has been done before by others but as far as I know nobody did it for the (german) softkeyboard.
If anyone is interested in how to do this for a different language, let me know.
I´m interesteing in traslation in spanish the rom wm6, do you help me?, sorry for my english
This release only changes the keyboard and dictionary, not the entire Rom.
In both cases you'll need certain files from a different spanish WM6 Rom (WM5 might also work). Translating a complete Rom is a ****load of work and unless you have Rom cooking experience I would adwise against it.
@ZakMcRofl
can you make a italian version too
could you make cab the spanish language?
I can look into it but understand that this will only be a translation of the input. Also I don't even know what kind of keyboard spain and italy has but I guess I can find out.
Maybe I'll do one other language as example and release a quick guide for others.
unfortunately it doesn't really work on my universal - the onscreen keyboard is there but it is invisible.
nice
works it too with hermes wm 6?
It should work on Hermes as well, depending on which Rom you use.
ZakMcRofl said:
Maybe I'll do one other language as example and release a quick guide for others.
Click to expand...
Click to collapse
Really looking for a tutorial to do a French one maybe we could discuss about it ?
1) Extract CAB
2) Get the required file from a French WM6 (or emulator image)
3) Adjust registry settings I make in the CAB to your image
4) Make your own CAB
You realize this is ONLY for the input methods (transcriber, softkeyboard, dictionary), not the entire Rom.
nice, thx!
Installed ROM on ETEN X500 with english WM6 ROM. Works fine - great effort, Zak!
Best wishes.
Hello,
this is a good beginning. Thank you, but for me I am searching for a german rom, because I want to write my WM5 backup back and therefor I need the same registry-sittings and indexes. Otherwise I must register all my programs twice.
Is it possible in the next future or is there no interest.
Thx
pjuppes
Not working for Dell Axim x51v with WM6 RTM rom
Hi there,
the appl. unfortunately is not working for my Dell X51v. I downloaded and installed sipchange and then the German Input file. I can select the German keyboard, but tapping on the Keyboard button does not activate a "visible" keyboard. But something seems to be there, for if i tap on the "invisible" keyboard space, for instance in "contacts", all contacts with a certain letter are chosen- I guess it must have been the letter I tapped on the certain space of this keyboard, even though I couldn't see a thing. I am not sure how to sort this, but maybe you have an idea. I read something somewhere that I have to replace a certain file in my Windows folder. Do you guys know how to solve this? Help would be very much appreciated. Thank you.
Does ist also work with the Black-Touch?
Regards
gersh
Great work, thanks
I've managed it to modify it to my phone skin (black) and thought, maybe someone is happy if I share my work
Notice: Works fine on my MDA Compact 2. I have uninstalled this keyboard first. Then reinstalled it using the cab above without restarting after that. Now copy the zipped .dll into \Windows, overwrite the existing one. Soft-Reset and it works. Don't know if this way must be exactly followed.
ps: sry for my english
To ZakMcRofl, thanks a lot for this.
Hi!
I've found a German WM6.1 Rom assembled by animelover from ppcfreaks.de forum. I'm not sure but i think animelover get the files from bepe's polaris 6.1 rom update...
I dumped the animelover Rom and extract the german language files.
http://rapidshare.com/files/102469739/0409.ZIP.html
(All credits goes to animelover & bepe)
I'm not a rom-cooker, so i don't have any idea how to make a german Blue Angel Rom. My first test was to copy the outres.dll.0409.mui to my 6.1 pdaviet BA and my message center gets german
My idea is:
- Change the language settings in the registry to 0407 (German)?
- Rename german files from 0409 to 0407 and copy it to BA?
- ...?
After copy german coredll.dll my startmenu gets empty, this ist not very sucessfull...
Greetings from germany, i hope somebody can help making the BA german
wurde mich auch interessieren
german rom??????
well i think you may rename coredll.dll to coredll.dll.0407.mui and try it remember to change [HKLM\MUI] dword SysLang from HEX 1033 to HEX 1031 ("SysLang"=dword:00000407)
Thanks for replay!
I've copy the coredll.dll.0409.mui with german content to my device. It changes the language of the todayscreen but also the path to \windows\startmenu. Now the default path is \windows\startmenü and this folder ist empty and i cannot start any programm or go to system settings.
I copy the content from startmenu to startmenü and my programs are back but system settings are not accessible.
I will do some more tests...
One more question:
Is it possible to dump the german rom from here http://forum.xda-developers.com/showthread.php?t=378080 to get the german language files? I've tried Molski.Biz DEVPACK but extracted files are not usable.
Where do bepe get the german 6.1 files? Is there any official german 6.1 rom available?
well most of the mui's are the same as in WM6, and some more must be translated, about the start menu items i am not sure, i have not tryed to translate the roms in any language but it will be cool to know howto
xplode said:
well most of the mui's are the same as in WM6, and some more must be translated, about the start menu items i am not sure, i have not tryed to translate the roms in any language but it will be cool to know howto
Click to expand...
Click to collapse
Hy
you ca take the german nothrills rom from kaiser forum it seems to have real wm 6.1 german muis.
to above: innitflash.dat needs to be edit or if you dont cook a new rom and only copy new muis to your device, a folder Startmenü with Programme and Einstellungen must exist in windows also a folder Autostart with copied files from startup folder
Teijak
Ok, dumping the new 6.1 roms is not easy or i'm to stupid to do this
Both 6.1 romfiles (bepe & NoThrills) are in .nbh format. I try to convert this with nbhtool and also nbhextract. It works and i get .nb files but they cannot processed by Molski.Biz DEVPACK. On my way I get a file with "MSFLSH50" in header or imgfs_raw_data.bin with "XPR" in header but both cannot be dumped.
Any suggestions?
Now I will try to copy one and one file to my BA and see if i can change most of the programms to german. Thanks for the information about foldernames in windows directory!
Ok, let's do some cool stuff:
Create \Windows\Autostart
Create \Windows\Favoriten
Create \Windows\Schriftarten
Create \Windows\Startmenü\Einstellungen and Windows\Startmenü\Programme
Copy content from Windows\Start Menu\ in the depending german folder
Copy german shellres.dll.0409.mui to \windows folder overwriting existing file
Reboot
Now today screen should be in german and also the system settings and some menus.
To get Messaging in german language, copy outres.dll.0409.mui to \windows directory.
Hm, i think the german files from first post are not true 6.1 files, because some tabs are not translated.
Kann das einer auch auf Deutsch schreiben???
my englisch not good
In Kurzform:
1. Ich bekomme das von dir angesprochene ROM von NoThrills nicht gedumpt. Bekommst du die Files da raus?
2. Wenn du das Startmenü Verzeichnis so anlegst wie du es in Beitrag #7 beschrieben hast und die Datei shellres.dll.0409.mui aus dem Pack im ersten Beitrag kopierst ist zumindest der Heute-Bildschirm eingedeutscht. Identisch kannst du mit outres.dll.0409.mui für die Nachrichtenzentrale verfahren.
mr_mpeg said:
In Kurzform:
1. Ich bekomme das von dir angesprochene ROM von NoThrills nicht gedumpt. Bekommst du die Files da raus?
2. Wenn du das Startmenü Verzeichnis so anlegst wie du es in Beitrag #7 beschrieben hast und die Datei shellres.dll.0409.mui aus dem Pack im ersten Beitrag kopierst ist zumindest der Heute-Bildschirm eingedeutscht. Identisch kannst du mit outres.dll.0409.mui für die Nachrichtenzentrale verfahren.
Click to expand...
Click to collapse
Hy
nimm die hier
http://rapidshare.de/files/38942935/Muis_Ger_WM6.1.zip.html
einfach von 407 nach 409 umbennenen
Teijak
ok, danke also giebt es noch kein Patch das es komplet deutsch ist??
Spanish Patch
Can anyone tell me where can I find a Spanish Patch? I have look at the internet for a very long time and the patch I have found doesn't work. Thanks!
Well, i've done some more tests. It's not so easy to translate the whole rom into german.
After a clean rom-install i changed the mui-registry-key to 0407 and create & copy folders for Startmenü, Programme, Einstellungen and Autostart. Then i copy german shellres and restart.
Most of the Today-screen ist now german. Changing the Locale in system settings to german and for 24h clock format change the time format to HH:mm:ss.
First problem: The translation for month "march" ist set to "Mrz", i think german special characters are missing?
I will do some more tests.
This will be a never ending story...
Some more information:
I've copied one-per-one file to my BA, reboot and ensure that german language is really working. my results:
shellres.dll.0407.mui
- Heute Bildschirm
- Einstellungen
shellresapps.dll.0407.mui
- Systemmeldungen (Install usw.)
outres.dll.0407.mui
- Outlook
- Kalender
tapres.dll.0407.mui
- Kontakte
browsres.dll.0407.mui
- Internet Explorer
MdsRes_wpc.exe.0407.mui
- Verwaltete Programme
notify.dll.0407.mui
- Erinnerungen
syncres.dll.0409.mui
- Activesync
Backlight.exe.0407.mui (funktioniert nicht)
- Hintergrundbeleuchtung
ButtonsExt.dll.0407.mui (funktioniert nicht)
- Tastensperre
CommManager.exe.0407.mui
- Verbindungsmanager
CSDType.exe.0407.mui (funktioniert nicht)
- CSD irgendwas
GPRSAuthentication.exe.0407 (funktioniert nicht)
- GPRS Einstellungen
Power.exe.0407 (funktioniert nicht)
- Akkueinstellungen
sym.0407
- Sonderzeichen?
WLanMgr.exe.0407
- WLAN Manager
This ist not an april fool!
mr_mpeg said:
Some more information:
I've copied one-per-one file to my BA, reboot and ensure that german language is really working. my results:
Click to expand...
Click to collapse
Hy
you can test the attached files i use them for my himalaya, if the kaiser muis dont work try to use the old ones from the WM6.0.
Teijak
mr_mpeg said:
Some more information:
I've copied one-per-one file to my BA, reboot and ensure that german language is really working. my results:
This ist not an april fool!
Click to expand...
Click to collapse
Hast du die Dateien umbenannt in x409x (und überschreiben) oder so belassen und nur die Registry geändert?
-
Did you rename the files to x409x (to overwrite the old ones) or did you change the registry?
Both methods will work on pdaviet rom. You can change the mui registry setting an leave the 0407 or rename the files to 0409 and overwrite the english version.
I try this on xplodes rom but this will not work. if you replace shellres with german file, my BA will stop booting with a "pling"-sound in startup-screen.
Now my plan is: use xplodes rom in english and wait for official german files from microsoft. they released 6.1 englisch emulator rom on april 1st, other language will come soon (i hope)...
I think the current language files are not signed and so they will be rejected by xplodes rom?!...
mr_mpeg said:
I try this on xplodes rom but this will not work. if you replace shellres with german file, my BA will stop booting with a "pling"-sound in startup-screen.
Click to expand...
Click to collapse
Okay. That's what I tried and my BA and it hang up like yours.
Some files are replaceable, some not.
Hallo,
ich kann die files nicht überschreiben. Bekomme immer einen fehler, dass ich angeblich keinen speicher mehr frei hätte.
Wenn ich mein Gerät UP- / oder Downgrade verliere ich dann die Geräte ID für z.B. mein TOMTom + Kartenmaterial oder bleibt die Geräte ID immer gleich???
MfG Micha
P.S. Mit welchem PROG kann ich ein ROM Backup von meinem HTC P3600 machen (Wie erstelle ich es und wie spiele ich es zurück)
Sorry aber mein Englisch ist grotten schlecht und ich möchte mein HTC nicht bricken!!!
Use translation tools!
http://www.google.com/translate_t?sl=de&tl=en
http://babelfish.altavista.com
I try it in english !
My question is:
Can I UP or DOWNGRADE WM 6.1 without lose my ID of the HTC P3600.
So I will reinstall my TomTom Software with my CARDS on it back, and so I need the same ID of the HTC P3600.
MfG Micha
Ps. the secound question is how to make a backup of my old ROM. (SOFTWARE??)
an_micha said:
My question is:
Can I UP or DOWNGRADE WM 6.1 without lose my ID of the HTC P3600.
So I will reinstall my TomTom Software with my CARDS on it back, and so I need the same ID of the HTC P3600.
MfG Micha
Ps. the secound question is how to make a backup of my old ROM. (SOFTWARE??)
Click to expand...
Click to collapse
Flashing a ROM usually rewrites device ID, so it changes.
As for backup, I use SKTools backup to create a clone image of my device, so I can restore exactly to the same state after a hard reset.
can i change the ID manuel
How can I change the ID after upgrade my ROM?
an_micha said:
How can I change the ID after upgrade my ROM?
Click to expand...
Click to collapse
You can not!
TomTom prob.
Have you got any idea what can I make to use my TomTom software + card on the new ROM?
thanx Micha
an_micha said:
Have you got any idea what can I make to use my TomTom software + card on the new ROM?
thanx Micha
Click to expand...
Click to collapse
Really don't know because I don't use TOM TOM. Buy a new license I guess? But I'll leave a place here for those who use TOM TOM, they can help you better on this specific issue from this point on.
Thanx
Thanx for your help tnyynt!!!
MfG Micha
Where can I get the SKTools to backup my HTC?
an_micha said:
Thanx for your help tnyynt!!!
MfG Micha
Where can I get the SKTools to backup my HTC?
Click to expand...
Click to collapse
http://s-k-tools.com/index.html?m_buy.html
an_micha said:
My question is:
Can I UP or DOWNGRADE WM 6.1 without lose my ID of the HTC P3600.
So I will reinstall my TomTom Software with my CARDS on it back, and so I need the same ID of the HTC P3600.
MfG Micha
Ps. the secound question is how to make a backup of my old ROM. (SOFTWARE??)
Click to expand...
Click to collapse
Upgrading WM5 to WM6 changes ID
Upgrading WM6 to WM 6.1 definetly changes NOT. Experience urpgrading Bepe 0.79 to Lalle´s 6.1
Hello everybody!
I`ve got a problem to get TMC Information with Navigon (v 7.4.2 an 7.4.3) and the GNS TrafficBox FM9BT-C.
The Connection between my Leo and the TMC Receiver is no problem.
But when I start Navigon, I'm getting no data with TMC Information and the special TMC icon/symbol is missing too.
I think that the Problem is perhaps the wrong configuration in the "UserSettings.xml".
So here is my configuration:
<Settings>
<Product>MN</Product>
<Version>7.0</Version>
<GPS>
<Type>1</Type>
<GPSPort>4</GPSPort>
<Baudrate>57600</Baudrate>
<DRVPrefix>COM</DRVPrefix>
</GPS>
<TMC>
<RadioStationScan>0</RadioStationScan>
<AutoRecalculation>0</AutoRecalculation>
<PreferPay>0</PreferPay>
<TMCPort>2</TMCPort>
<TMCBaudrate>38400</TMCBaudrate>
<DRVPrefix>COM</DRVPrefix>
</TMC>
Click to expand...
Click to collapse
Can anybody help and tell me the wrong Configuration? Or is there an other(general) problem with TMC and the Leo (i.e. Hypergps)?
I'll be happy about every hint!
Hi,
at the moment i have no Navi installed on my device, but i was in contact with the GNS Support.
I had an older Version of GNS GPRS Device and i asked me how to connect the device with my HD2!
After sending an Email to the support i received this german Email:
Sehr geehrter Herr ***,
danke für Ihre Anfrage. Hier eine kurze allgemeine Anleitung zur Einrichtung der GNS TrafficBoxPlus-FM9BT-C auf einem PDA mit WM5.x/6.x:
- Auf dem PDA in Start - Einstellungen - System - GPS: alles deaktivieren
- Softreset des PDA
- GNS TrafficBoxPlus-FM9BT-C mit Strom versorgen (blaue LED blinkt)
- Bluetooth-Manager starten
- Registerkarte Modus: Bluetooth einschalten
- Registerkarte Geräte: Neue Partnerschaft
- FM9-BT-C auswählen; "Weiter" drücken
- Als Zugangsschlüssel "0000" (viermal Null) eingeben, "Weiter" drücken
- Haken für "Serieller Anschluss" setzen, "Fertig" drücken
- Registerkarte COM-Anschlüsse: "Neuer ausgehenden Port" auswählen, FM9BT-C auswählen, "Weiter" drücken
- Anschluss COM-Port-Nummer auswählen, sichere Verbindung deaktivieren (Häkchen raus), "Fertig" drücken
(Wenn der ausgewählte COM-Port vom System schon belegt ist, kommt eine Fehlermeldung, dann einen freien COM-Port wählen)
- Bluetooth-Manager über (OK) verlassen.
- Den ausgehenden Bluetooth-COM-Port in der Navigationssoftware als TMC-Anschluss angeben mit einer Datenübertragungsrate von 38400 Baud, GNS-Protokoll.
- Die Bluetooth-Verbindung wird von einem Windows Mobile 5.0/6.0 PDA erst aufgebaut, wenn eine Anwendung den eingerichteten ausgehenden Bluetooth-Com-Port anfordert.
- Wenn eine Bluetooth-Datenverbindung erfolgreich vom PDA zur GNS TrafficBoxPlus-FM9BT-C aufgebaut ist, leuchtet die blaue LED in der GNS TrafficBoxPlus-FM9BT-C konstant blau auf.
- Wenn der eingerichtete ausgehende Bluetooth-Com-Port nicht in der verwendeten Navigationssoftware anwählbar ist, muss die Navigationssoftware neu installiert werden.
Mit freundlichen Grüßen
***
Click to expand...
Click to collapse
Maybe its helpful for you.
Thanks for this hint, but I'am sorry to say that this is not the solution for my problem :-(
Basti1986 said:
Hello everybody!
I`ve got a problem to get TMC Information with Navigon (v 7.4.2 an 7.4.3) and the GNS TrafficBox FM9BT-C.
The Connection between my Leo and the TMC Receiver is no problem.
But when I start Navigon, I'm getting no data with TMC Information and the special TMC icon/symbol is missing too.
I think that the Problem is perhaps the wrong configuration in the "UserSettings.xml".
I'll be happy about every hint!
Click to expand...
Click to collapse
Hi Basti,
First of all, MN 7.4.2 & 7.4.3 are no PDA versions
The FM9BT-C works with MN 7.4.0 or 7.3.x PDA on the HD2. One minor flaw: The Widcomm Bluetooth Stack wants to reconnect the FM9BT after launching MN|7 (see attachment). This is a common glitch with almost every PDA/Smartphone using Widcomm/Broadcom BT Stack 1.9.x
If you insist on using 7.4.2 or 7.4.3 enter
<GPS>
<Type>2</Type>
in your usersettings.xml; explanation:
0 = GPS only, no TMC receiver
1 = combined GPS/TMC receiver
2 = GPS + external TMC
<TMCPort>2</TMCPort> looks O.K. if that is the port that the Widcomm BT stack picked for your FM9BT. If not, choose the proper COM port (I have the FM9BT-C on COM2 on my HD2 too).
Try to change <DRVPrefix>COM</DRVPrefix> to <DRVPrefix>RDS</DRVPrefix> in <TMC> section (not <GPS>!)
If everything fails use a port splitter like Franson GpsGate to remap your COM port. But afaik GpsGate fails on devices with Widcomm BT Stack. Nevertheless you should give it a try.
Please report back if anything helped.
Hy,
i don't get any Connection with my HD2 und the FM9BT-C...
<GPS>
<Type>2</Type>
<GPSPort>4</GPSPort>
<TMCPort>2</TMCPort>
<Baudrate>4800</Baudrate>
<DRVPrefix></DRVPrefix>
</GPS>
<TMC>
<RadioStationScan>0</RadioStationScan>
<AutoRecalculation>0</AutoRecalculation>
<PreferPay>1</PreferPay>
<TMCPort>2</TMCPort>
<TMCBaudrate>38400</TMCBaudrate>
<DRVPrefix>COM</DRVPrefix>
</TMC>
Click to expand...
Click to collapse
Can U told me what i must change? (i have tested COM and RDS)
The message in your Picture i don't receive.
Greets
My settings for HTC HD2 + FM9BT-C in MN 7.3.6 PDA (should be the same for 7.4.0 PDA):
Code:
<TMC>
<RadioStationScan>0</RadioStationScan>
<AutoRecalculation>1</AutoRecalculation>
<PreferPay>0</PreferPay>
<TMCPort>2</TMCPort>
<TMCBaudrate>38400</TMCBaudrate>
<DRVPrefix>COM</DRVPrefix>
</TMC>
<GPS>
<Type>2</Type>
<GPSPort>4</GPSPort>
<TMCPort />
<Baudrate>4800</Baudrate>
<DRVPrefix>COM</DRVPrefix>
<BluetoothDevice>
<Name />
<Address></Address>
</BluetoothDevice>
</GPS>