Related
recently my xda neo been working so slow. The peak is when i was playing a game on it, it hanged. I thinked its just my neo take some time to load so just let it on. After several mins, it suddenly went off and i cant turn it back on. And the saddest thing is i lost my usb cable and cant connect my device to my pc. I heard about bootloader, whats that actually do? Any idea how to solve this? Help will be much appreciated. Thanks in advance.
Hard reset
Try hard reset....i also have a xda neo & have similar problem after i installed hangman(i know...lol)....hard reset & done....to hard reset go 2 clear storage in setting & press 1234...if u have tried it...i read it one thread...user had similar problem & found out battery died...
RieLL said:
recently my xda neo been working so slow. The peak is when i was playing a game on it, it hanged. I thinked its just my neo take some time to load so just let it on. After several mins, it suddenly went off and i cant turn it back on. And the saddest thing is i lost my usb cable and cant connect my device to my pc. I heard about bootloader, whats that actually do? Any idea how to solve this? Help will be much appreciated. Thanks in advance.
Click to expand...
Click to collapse
Dude,
You can Hard Rest your device through Clearstore only when the device is running. I assume your device is not powering on, so Hold the Camera Button and the Third button i.e, the Comm button and with your stylus push the reset button. Hold the first two buttons till your get factory reset message on the screen. Once on that screen, press the green button, ie. the call making button. The device will restore itself to the factory settings.
Good luck.
Please help me, nothing happened my qtek s200 is dead i have the same problem suddenly it turned off and never went on again, i replaced the battery and nothing happened just a red light turn on when i connect it to the wall charger. Please help
Hi all, first time poster long time browser I checked the wiki and did a search but couldn't find a similar post. Here goes..
Yesterday i tried to connect to this protected wifi at a coffeeshop, but my HD did not manage to connect even after entering the network password. In the end it froze. The home screen was showing, i could feel the vib when pressing the screen, but no action happened. I did a soft reset, but that didnt make a difference... nothing working still, while it is still trying to connect to wifi.
Then I first did one hard reset. I managed to get to the screen where i am asked to touch the screen in order to configure the device. While i could feel the vib, nothing happened. I did a second hard reset, ended up at the same screen, but this time there is no vib when pressing the screen... and still nothing is happening. Same situation when doing a third hard reset.
I am lost for ideas.... Have anyone of you ever experienced something similar and what did you do to resolve it? Or have anyone any suggestions as to what I should try next??
Very bad dude,
what you can do (i dont know if this will work).....Flash your original rom again. it is a kind of a hard reset, but maybe this will work.
can you boot to boatloader (three color screen), and see the text USB when connected to pc?
Hi Kadir,
thanks for your answer.
I am trying to flash my rom using the excellent tool Hard-SPL package from OliNex, but to no avail.... i keep getting error message 202 meaning that it can't connect with the device...
This may sound obvious, but just in case... have you tried to remove the battery when the device is turned off? Is the only way to ensure you are fully turning it off, in case you have some kind of 'static' acting up. I had a similar issue on a PDA and also in my notebook, and was solved by removing battery.
hi,
thanks for the advice. I wish this was all it took, but alas no, i am not that lucky. I am starting to think this is a hardware issue....
can you see the 3 color screen?(when phone is off push power on + volume down button and keep volume down pushed).
if yes can you see it you are now in the bootloader. just chech if you see text usb, this means its connected.
and then flash, no 202 anymore.
do not use hard spl if you want HTC to repair your phone(warranty issue)
Don't you have to disable USB connection in ActiveSync too? Or was that just me?
I found the Flash program killed active sync anyway, but you're right all the guides say to disable it.
Hi,
I have got my trinity phone one year ago and never had a problem since last week. When starting my phone, it stops on the first screen (with "orange" logo) and nothing more happens.
I tried to reset it without succeed. The phone is not detected by the "activeSync" to make it flushable.
Help please !
Yves Florent CK
my problem is mor or less the same... only that dont apears any image on screen and the green led is constantly on...
I have loaded a long time ago an old version of ROM Gelly.
This ROM worked perfectly to a friend who suggested to do the same with my trinity.
The PROBLEM is that when i try to open the pda it freezes to the first srceen showing the rom version and after....nothing!
I tried to load again Gelly from the bootloader, it begins to run, it runs about 1% then the trinity makes a flash (this means it loses the connection with the pc) and then shows me again the first screen....
Please i need help!
me to. i try install the rom original and my pda is living again.
try this to
hi,
2 things ...
have you tried a hard reset ? (hold both softkeys & hit reset button)
and when flashing:
when you first run the rom upgrade from PC with phone on Activesync, it is quite common for phone to hang at the bootloader screen ...
worry not -
just re-run the upgrade from PC again immediately, without disconnecting or attempting to switch phone off.
(the word USB should be visable on device under the coloured bars)
if you do get hung up at bootloader screen a hard reset should at least get you back to where you were, and you can try re-flash again.
hope this helps,
regards,
Kevin
My trinity won't work anymore...
Hi all!
My trinity wont't work anymore. When i press the ON/OFF-button, the display is lighten up a bit, then the buttons are lighten up. And nothing more.
When i will go to bootloader mode, it is the same.
And when i will to a hard reset, the trinity ask me to press SEND or END key for restore factory default or cancel. When i choose the SEND key, on my display some ridicoulous letters appear, but nothing more.
When i try KITL mode, everything is the same.
Can someone help please?
Because i can't do something on my trinity
EDIT (maybe this can help my helper ):
After some time, the display and the buttons are not lighten up anymore.
When i try to charging the battery, it only works, when the buttons are not lighten up (when i switch on, charging is ok; when the display is lighten up a bit, charging is ok; when the buttons are lighten up, charging won't work; when the display and the buttons are not lighten up anymore after a time, charging is ok)
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
never mind... problem solved... tks anyhow
weezer_88 said:
never mind... problem solved... tks anyhow
Click to expand...
Click to collapse
ok solved...
Can you tell how you did it?
Thanks
weezer_88 said:
hi... i have a similar problem.. i tried soft reset, hard reset, but my phone wont go past the boot screen.. previously i just updatet the windows mobile from 5 to 6 and the phone crashed half way throw.. can some one help me.. by the way the windows mobile was one update from the web...
Click to expand...
Click to collapse
But my trinity don't go to the boot screen, nothing on the display but lighten up slightly...
Nevertheless, can you please post, how you solved your problem?
THANK YOU in advance!
I downloaded the original Rom windows mobile 5 from http://www.htc.com/www/SupportDownload.aspx?p_id=3&cat=2&dl_id=111 then entered in KITL mode, connected the usb and reinstalled the original Rom, and all was fine...
hi peopple. i have a htc touch p3450 with 128/256, the problem is when i turn off the device and then turned on appears the blue screen on windows mobile and the the device restarted and i have to calibrate the screen, put the hour, the password, and this steps, its like the device had a hard reset everytime i turned off. sometimes the device turned off from it self and i had to push the camera botton, volume up and reset with the device turn on, after few minutes the device starting again like the same way like i say you some lines before.
ok, the other day i try to find the way to fix my device, but i found a problem, better say two prolems. my device dosnt entry in a boot loader mode, and i try millions times on millions diferents ways and nothing happens. the second problem in this moments my device are totaly dead, only turn on the blue screen and i made the hard reset and nothing, dosnt start like before, i cant made anything. i try with a gold card anda nothing all result impossible
please experts i need yours help!!!!
peopple sory for my english, its so bad!! im from argentina!
i hope you can understend me anda try to help me
first of, sounds like your backup battery is dead, you tried charging overnight? That should hopefully charge it. Secondly, what else have you trid from the rom section? Have you flashed a custom rom?
If not, and overnight ac charge doesn't help the backup battery, do you still have warranth, as it could be worth returning to htc?
Stu
I think there's something wrong with your phone, with the phone's memory because it keeps forgetting things, try to make contact with your provider or HTC
Caution
Your problem can only be guessed from the info you have given
If it does something similar to a Hard-Reset every time you power on/off
then it can be a problem with the flash memory, or you can have a corrupted ROM
If its completely bricked (no backlight) and you head to the HTC Service center, and they find that you have custom ROM modifications they will most probably deny you warranty and/or service
Good luck
I personal think it has been overheated, buy/get/try a new battery and it will work again. turn it off and get a cooler or something like that and cool the phone and let it for 1 day on your table or somewhere and hard-reset the next day.
Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..
Crazeh said:
Hello everyone,
I have an S3 neo, it's 6 months old. About 2 months ago i started checking in this forums, and then i flashed cm12, and started adding custom roms to my phone. Everything was well, phone was working fine, and so on.
One morning i woke up and my phone went off, and when i turn it on, it's black screen. I restarted few times, took out memory card, and poof it worked. Was all good.
I left it like that and next morning it happened again. And since then i tried all the ways, like take out battery, hold power button 1 min then try to turn it on after few minutes, and so on. Nothing worked. Pulling out memmory card or sim card didn't work either. It's like this for almost 2 weeks i can't use the phone.
I cant get in download mode or custom recovery i i don't know why it won't react on that. It turns on each time like normally, led notifiaction works, the lights on home and back button works, only screen is black. I can unlock it, and such things but cant see anything.
I even succesfully did a factory reset over play store from pc, but that didn't help either..
Biggest problem is that its under warranty but since custom rom i can't take it to service unless i have money to pay... which i dont
I have NEVER DROPPED it, it was never in water, and so on. Doesn't have a scratch at all.
It even has sound, and everything. Just freaking black screen ....
So what i am asking is if anyone here knows how to remove custom rom and custom recovery over pc,is it possible, without the screen? Any way to do it so i can get warranty back ? All i need is a freaking stock rom and stock recovery and a binary reset i guess. Just freaking would need screen to work for 5 mins eh....
If anyone has any ideas please post them, thanks..
Click to expand...
Click to collapse
I think you can boot to download mode or revovery. The LED notifi and backlight buttons won't turn on if you boot to download mode or recovery.
Just try to boot to...
1. download mode. Just press and hold for 2-3 seconds power + home + volume down
2. then wait 3 seconds. After that press volume up.
3. Connect your phone to pc, open odin and check if a device is connected.
4. If a device was found by odin - flash a ROM (stock or something else) and hope that this will fix the black screen problem.
Good luck!!
Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks
Anyone has any ideas ?
So what all i tried is
Remove battery, hold power button for 1-2 mins, let phone for few mins and turn it on. didn't work
I tried with adb,but usb debugging not on so cmd cant find my device
Only thing left i guess if someone has idea how to get in download mode in some other way or some program that doesnt reguire download mode but can flash rom and etc.
@Crazeh
Take it back to the nearest service center and act the dumb ("I don't know what is wrong with it")
I have done that many times
They are prob gonna call me and tell me to pay for fix
No one has any idea what else should i try ?
try link2sd app form play store. it has the option to boot to download mode. I think titanium backup has the feature also.
My screen is black so i can't do anything on it.....
try to disable ambient screen. report if problem persist
How should i disable ambient screen ? While i can't see anything on phone cause of black screen ?thanks for reply Rox
Anyone?
Crazeh said:
Anyone?
Click to expand...
Click to collapse
ok so i think your problem isn't due to any rom but hardware problem
power off your phone remove the back , look on the left you see a little trap , open it , now you see connector it is the one of the screen try to see if you can disconnect and reconnect it
power on your phone and see if it work :fingers-crossed:
Where is that little trap?
btw if i do this will i loose my warranty completely ?
Crazeh said:
Hi, thanks for ur reply but... My phone turns on when i click home + volume down + power button. I hear sound, blue led notification and so on.......
But when turned on, when i connect to usb odin recognizes it, says connected, and when i try to install the rom i it takes really long and on the end i get fail..*attached the screenshot of fail) I guess because its not in download mode. Any other suggestions how i could get in download mode more?
More suggestions please?thanks
Click to expand...
Click to collapse
If Odin recognizes it, it means it's in Download mode. The device has different interaction with the host over USB when it's not in Download mode.
I don't see the screenshot of the failure. It may be that something got broken in your hardware, so the flashing fails. There's a known issue with the S3 called "Sudden death syndrome", I don't know if it applies also to the S3 Neo, where some of the memory of the ROM fails suddenly. If that is the case (I'm not saying it is, but it might be), there's no fix other than replacing the hardware.
Odin doesnt go over setup connection. cant post screenshot bc im new to the site. btw im sure the phone is on but recognized in odin...