What the deuce?
So I installed some stuff on my HD2, coOkies home tab and bsb tweaks. And now for some reason whenever I do a soft reset the phone a little error comes up saying that there was no modem detected.
Its solved by going into the Comm manager and turning on the data connection. But its quite annoying having to turn it on all the time. Im not sure which program is doing it. And it only happens 80% of the time. Sometimes I'm lucky and it just works. It might not be the programs, I honestly have no idea what it is.
I cant be the only one with this problem. It may have been adressed but i couldnt find anything. Help!
Thanx
Related
im having trouble turning on my bluetooth. It wont turn on at all... ive tried turning it on from the Comm Manager and nothing.. i tried it from Settings>Connections>Bluetooth>Mode and clicked on turned on and it still did not turn on.... can somebody help me!?!?!?!
have you replaced your stock comm manager with a new one?
no.. the only i have done to my phone is change the pagepool to 4 MB
i tried pairing my phone with another phone and it said something about error with bluetooth hardware... what can that mean?
I've never had much luck with any bluetooth stuff. Even using headsets has always been a pain in the ass, so I don't use it much... so I dunno.
thanx for tryin to help... im thinkin bout callin it in
try hard resetting your phone before you do anything.
Im sure you know this, but make sure you are not plugged into your computer when you are turning bluetooth on. For whatever reason, it wont let you do both at the same time.
you can try that ^^^^ or you chould try the hard reset, even with the hard reset the page pool will remain the same
my phone does not connect to att or the internet. it looks and looks for signal but it will never work unless i plug my phone onto my computer and sync it through activesync. after leaving it plugged in my phone will find signal and i can unplug the phone and work it regularly. this is a problem cause if i turn my phone off its done.. i wont be able to get it working after i turn it back on unless i stop at home and fix it which is a pain when I travel and have to turn my phone off before a flight.
when i turn on the phone it will say i am missing the file " and i will not work properly.. etc..etc i dunno if that has anything to do with my problem
Try a Soft reset or Hard Reset,hope it'll work.
Cheers!
neither worked
the330ballers said:
neither worked
Click to expand...
Click to collapse
hmmmm,
You'll perhaps have to reflash it again,download official stock rom of your provider from its website and flash.ok
cheers!
anything??
well i have the nbd touchflo or whatever installed on mine and i have hard reset it a couple times.. reinstalled the software as well. usually when there are no programs it turns on and finds the signal. even when i do install programs it will work maybe the next 2 or 3 times i turn it off or soft reset it. then after that.. it never finds signal after turning on it needs a computer. this is really a hassle for traveling or if the battery drops out. sometimes it might even just lose signal for no reason. maybe im not doing something right.. is there a setting that needs to be changed once the phone screws up and doesnt find signal?
is it possible that if too many things are runnning it will not be able to find signal. right after turning it on i used the taskmanager to shut off ilock and s2u2 and then it shortly finds signal afterwards. sometimes it does att and sometimes it finds cingular. if it finds cingular the phone does not work and it says that the phone is off even though in the comm manager it is on. i just reset it and try again..
and whats the diff between the G (gprs) and E (medianet edge)? the phone never really works when it is doing G and when it tries to find signal when turning on the phone, sometimes (couple seconds) it will show some signal (calls still cant be made) with the G logo then eventually lose it.
So I am having this new problem ever since I have data. When it is connected, which is all the time, it takes ~3-4 seconds to actually answer a phone call after pressing the answer button. If i turn off data, picks right up. anyone else ever have a problem answering calls with data connected?
If you dont have problems, can you please comment that you dont so i know other people's phones are working. thanks
Slow to answer calls
I am having the same problem. I noticed it first when I installed the 3.16 rom with GPS so wondered if that was the culprit.
i think it is occurring when you are connected to data. i turned it off and works better, but i dont want to have to turn my data off i just started paying for it and love having it.
friguy33 said:
So I am having this new problem ever since I have data. When it is connected, which is all the time, it takes ~3-4 seconds to actually answer a phone call after pressing the answer button. If i turn off data, picks right up. anyone else ever have a problem answering calls with data connected?
If you dont have problems, can you please comment that you dont so i know other people's phones are working. thanks
Click to expand...
Click to collapse
I recently started seeing this also.
I'll try turning the data off and see if it goes away.
By chance do you have Advance Configuration installed?
dwertz said:
By chance do you have Advance Configuration installed?
Click to expand...
Click to collapse
yes i do...oh no, why?
friguy33 said:
yes i do...oh no, why?
Click to expand...
Click to collapse
I do as well...
Perhaps I'll try uninstalling and see if there's a change. Or is this something else I should know?
well...i did a hard reset, installed everything BUT the advance configuration thing...all working great. Plus i had a problem with the backlight being disabled, now that works fine. guess that Schaps Advance configuration program screws up a lot. Thanks for thinking of it
Mine was doing the same thing and I looked all over and found in ppcgeeks that several people found that advanced configuration was the cause. You have to do a hard reset. I unistalled it and did a hard reset and installed all the same programs except that and bam the issue was fixed. What a pitty because I praise Schaps Advanced configuration. It makes it a lot easier to change settings. I am not sure of the exact issue or if it has been fixed but not installing it fixed my issue.
I cant find the link that I read before, but here is a link that states it too. Do a backup of your phonedo a hard reset install all the apps but Advanced Config and see if it helps. Worst case restore the backup.
http://forum.ppcgeeks.com/showthread.php?p=157682
or
http://pdaphonehome.com/forums/ppc-6800-xv6800/101646-delay-before-hearing-caller-hello-hello-hello.html #9
I'm having the same issues.
Delay only happens when data is active.
Running DCD 2.3.1, Radio 3.27, and I do have Advanced configuration installed.
I cooked in Advanced Config, so I have to reflash to take it out. If you find an easier way of isolating the problem I'd love to hear it. Otherwise I'll have to flash with nothing and add slowly till I determine the culprit.
Every time I install G-Alarm on my phone, TouchFlo seems to get disabled.
It is still enabled in the settings menu, but the home screen is just a HTC wallpaper, and when I press the windows key the start menu is opened.
I have tried rebooting multiple times, but nothing seems to help...
Only removing the application has worked so far for me
Any ideas?
EDIT: I'm having the same problem with G-Profile!
It seems that the programs just disables the TF service from launching/running...
Haven't experienced that problem myself, using G-Alarm v1.5.1 here.
Hmm.. Strange.
I have heard more people say the are using some of the "G-programs" on the Touch Pro 2. So it must be something in the ROM I guess.
I am using an unbranded Dutch version. But I have no clue on how to fix this...
Ok. I have figured out that if I remove the PIN entry screen from the start up sequence (so no PIN has to be entered anymore) G-Profiles works. I haven't tried the others yet, but I'm sure they'll work as well.
The thing is... I would like my phone to have a bit of protection by the PIN code
I don't use G-alarm on my Dutch TP2. But I have this issue with not starting TouchFlo3D also. On HTC advise I resetted the device. Then it worked for abou 4 hours and after that it wouldn't start anymore. The screen staus black with the fancy HTC in the sceen... but no "starting touchflo".
Als for that reason I instaled SPB mobile shell latest... but this will not update new SMS or Mails in the main screen... more people on SPBCLUB have this issue... I think it has something to do with the TP2 and not with SPB... more people with same problems?
Ahh...so that's what causing it.. I have a G-Alarm too but didn't realize it's affecting the interface not loading up
Several soft reset and it'll load up. Kinda annoying until the developer fixes it (and we have to pay for the new version )
I don't think this problem is just with G-applications, I am having the same problem withouth any g-apps installed. After a few reboots it usually works again, but I think this is a more genereal TP2 issue.
michaelra said:
Ahh...so that's what causing it.. I have a G-Alarm too but didn't realize it's affecting the interface not loading up
Several soft reset and it'll load up. Kinda annoying until the developer fixes it (and we have to pay for the new version )
Click to expand...
Click to collapse
I've asked on his forum, and he said it probably was a TouchFLO bug...
Thread here: http://forum.ageye.de/viewtopic.php?f=22&t=721&start=0
(I'm BiT on there...)
I've had the exact same issue but found out that with me it wasn't linked to G-Alarm but to the 'Background4AllTabs' plugin,
I've hard reset tons of times, tried several alternate installs, but once I start changing TF3D options like th background or clocks, it slows down tremendously in screen rotation and it often won't start after reboot...
hmm i dont know if you still have these problems but a few days ago i figured out a solution^^
The problem is the entry. I've got an htc touch pro 2.
Soo to get TF3D starting try fallowing thing:
-Go to "Settings-->Connections" and turn ON the flightmode (this will disconnect all)
-Then restart your phone... wait a few seconds and TADAAA TF3D SHOULD start.
-Go to "Settings-->Connections" turn OFF the flightmode
-Enter your PIN
-Now your phone should connect to your provider.
So if this work you have to do this every time you restart your phone... so turn on flightmode --> restart--> turn off flightmode
I hope this way is not only working on my phone
btw sorry about my english xD
GreeZ $me
Flightmode works for me
Indeed it works now. But I have another interesting thing.
I was used of waiting nicely looking at the PIN input screen. Wait, lets say,. 20 seconds; cancel the pin input and see the Touchflow coming up in 100% of the cases. So I could live with the problem.
Now I installed Navigon who puts a file in the autorun folder. And now Touchflow never starts up any more with the exception of the Flightmode trick.
Is navigon guilty?
i never used G-Alarm but i have the same problem.
so i've tried checking on/off Today/Item/TF3D, tried Flight Mode, and it still won't work. i'm talking like only 30-50% of the time it does work. and I never had PIN1 enabled!
i'm no programmer but it is conflicting with apps we install because TF3D works perfectly when the phone was fresh or hard-resetted. btw i'm using 6.1 Stock T-mobile
Hey,
I am having problems disabling my Wi-Fi. To be honest this isn't really a problem because my Wi-Fi is faster than mobile data transfers. Having said that though, obviously i would like the option to turn it off.
I havn't changed anything today on my phone so no software changes etc. Just on 'Comm Manager' on the Wi-Fi switch the whole line is light grayed out (and therefore i cant do anything)
Tried the standard turn off/turn on, soft reset, holding power button and terminate data connection, yet it is still grayed out and still on...
Any Ideas?
Sorry if there is already a similar post. I had a quick look and search but couldn't find anything to help. Please point in the right direction if there is.
Timmzy89 said:
Hey,
I am having problems disabling my Wi-Fi. To be honest this isn't really a problem because my Wi-Fi is faster than mobile data transfers. Having said that though, obviously i would like the option to turn it off.
I havn't changed anything today on my phone so no software changes etc. Just on 'Comm Manager' on the Wi-Fi switch the whole line is light grayed out (and therefore i cant do anything)
Tried the standard turn off/turn on, soft reset, holding power button and terminate data connection, yet it is still grayed out and still on...
Any Ideas?
Sorry if there is already a similar post. I had a quick look and search but couldn't find anything to help. Please point in the right direction if there is.
Click to expand...
Click to collapse
Go to Settings, Menu, All Settings, Connection, Wi-fi. There's a checkbox there for turning on and off. You may find that doing this re-enables the one on the comm manager, otherwise, you're stuck with doing it that way (for some strange reason).
I'd also recommend the Wifi shortcut on the cab thread in the HD2 themes and apps forum. I have that in my quicklinks so I can quickly toggle the wifi on and off whenever I get home or to work or a friend's house etc..
Cheers bud.
Thats turned it off, but yeh as you suspected it doesn't enable me to do it in comm manager. Do you think you could give me a link to that quick link?
Timmzy89 said:
Cheers bud.
Thats turned it off, but yeh as you suspected it doesn't enable me to do it in comm manager. Do you think you could give me a link to that quick link?
Click to expand...
Click to collapse
Yes mate - it's in my signature - the cabs link. You want the Touch X reset and wifi cab. It creates shortcuts in your start menu, and you can then add them as quicklinks if you want.
This may well be a stupid question, but is the device connected to PC with a USB cable just now?
hicks:
Nope, not currently... It was earlier though... If that is meant to make it so you cant toggle it, maybe it might be stuck like that from earlier... I will try plugging it back in later and see if this sorts it.
Cheers
johncmolyneux:
Excellent cheers! haha didn't see it there
Timmzy89 said:
hicks:
Nope, not currently... It was earlier though... If that is meant to make it so you cant toggle it, maybe it might be stuck like that from earlier... I will try plugging it back in later and see if this sorts it.
Cheers
johncmolyneux:
Excellent cheers! haha didn't see it there
Click to expand...
Click to collapse
They weren't there earlier. I decided that you'd be the last person I'd search for those threads myself for
legend.
Oh and yeh seems it was a minor fault... plugged it back into comp and disconnected again, seems to be sorted in comm manager now.