Database Users

Somebody HELP me with SAPPIMG.nbh

hello
when i do the first steps good, and put the SAPPIMG.nbh on my sd card..
and goos to the fastboot mode. action to start..... i have this messege
Model ID incorrect!
update fail!
this are my settings
SAPPHIRE UNKNOWN 32B SHIP S-ON G
HBOOT-1.33.006 (SAPP10000)
CPLD-10
RADIO-2.22.19.261
can somebody help me

You didn't say anything about turning that sd card into a goldcard. Did you do that? If you didnt, then there's your problem

Hi, I have the same problem (this is my first day with my new htc magic,and the first day in my life with android).
My magic is a a black, german, vodafone branded 32b version, with 1.6 android on it.
I haven't changed anything on it yet, everything is stock on it.
So, if I just try putting the sappimg.nbh on the sd card and trying to update, it says the same to me:
Model ID incorrect!
update fail!
So I tried to make a goldcard following these steps:
http://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
(on section II. 9. it says to replace the reverse cid first two digit to two 00,my first two digits were "ca",so nut numbers,I've replaced them to 00)
Then I tried to downgrade the phone with the goldcard,but it says:
Main version is older!
Update fail!
I thougt that this procedure will put android 1.5 on my magic,so how can it be that the 1.6 on the phone is "older",than the 1.5 I'm trying to put on it?
What have I done wrong?
What can I do?
How can I put sense rom on my magic?
Any help would be apreciated

Mc S.H.O. said:
hello
when i do the first steps good, and put the SAPPIMG.nbh on my sd card..
and goos to the fastboot mode. action to start..... i have this messege
Model ID incorrect!
update fail!
this are my settings
SAPPHIRE UNKNOWN 32B SHIP S-ON G
HBOOT-1.33.006 (SAPP10000)
CPLD-10
RADIO-2.22.19.261
can somebody help me
Click to expand...
Click to collapse
You don't need a goldcard with 1.33.0006. Probably an issue with the SAPPimg.nbh you're trying to use. Try this one:
http://www.megaupload.com/?d=BLM4EDGE
Once downloaded, format your SD card through your phone under 'SD card and storage'. Once formatted, place the SAPPimg.nbh on your sd card. Power down your phone, hold volume down and power until you're in the HBoot screen. Press actions to perform update and wait until complete. You should be at 1.5 at this point.

thanks friend
i am downloading it right now...
hope this one is the good one
one question.... why is my HBOOT 1.33.006 the good one? Perfect or nonperfect spl????

Mc S.H.O. said:
thanks friend
i am downloading it right now...
hope this one is the good one
one question.... why is my HBOOT 1.33.006 the good one? Perfect or nonperfect spl????
Click to expand...
Click to collapse
I believe its actually a perfected SPL, however, the one click method still seems to work with this SPL. That's what I'm using, that's what my girlfriends phone has, and I've rooted about 5 other phones using that exact SPL. You shouldn't have an issue. Worst case scenario, you'll have to make a goldcard and should be able to obtain root that way.

sombionix said:
I believe its actually a perfected SPL, however, the one click method still seems to work with this SPL. That's what I'm using, that's what my girlfriends phone has, and I've rooted about 5 other phones using that exact SPL. You shouldn't have an issue. Worst case scenario, you'll have to make a goldcard and should be able to obtain root that way.
Click to expand...
Click to collapse
this one is not working for me... the same problem is coming up.
hmmmz now is it time to make a goldcard... hope is not to mutch work
oneclick method

Mc S.H.O. said:
this one is not working for me... the same problem is coming up.
hmmmz now is it time to make a goldcard... hope is not to mutch work
oneclick method
Click to expand...
Click to collapse
Hmmm...strange. Sorry to hear. Goldcard method should get around it just fine. Just make sure you follow the goldcard instructions to the T.

Do you have the correct sappimg.nbh? I remember getting the same error and the problem was that I was using a file that was meant for dream instead of mytouch. the mytouch file should be around 98MB.

The SAPPIMG.nbh what i have is 96MB.. is for the mytouch...
i think to make a goldcard and try it whit that..
32B UNKNOWN From Vodafone.. i cant get the phone sync with my computer..
only to open the map (SD Card)
****tie magic
i have the hope that i walk with a magic with a hero rom. haha
****tie englishe sorry..
thanks

Downgrading mytouch 1.5 to 1.5
Im trying to downgrade using the SAPPIMG.nbh file and it says Main Version Older, Update Fail. my phone stats are:
Sapphire PVT 32B S-ON G
Hboot: 1.33.0007
Radio: 2.22.23.02
Please help i wanna root it!

Rogers HTC Dream Error 0002802 not allowed

Hi Just got a Rogers Dream from a friend in the following tree color state:
DREA210 PVT 32B RUUNBH
BOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Serial0
1) I tried safely to install Rogers rom for the htc dream but PC does not detect my USB port failing with error 170.
2) Read Forum for 2 hours, and tried stock firmware, made sure SD card formatted FAT32, DREAIMG.nbh and update.zip it did boot, loading... and error 0002802 not allowed showed.
Can someone point me to the right direction for the next steps?
What kind of more information can I provide? And how to get it? Thx

what are you trying to achieve? That dream is running the 1x radio with a stock T-Mobile spl, thus ought to be used like a T-Mobile g1,
You could run a true rogers nbh via SD card.. but this is probably not going yo give you the phone you wish to use.
Tell me the end state you want to be in we can help you get there.

My goal was to use the damn phone, after 12 hours of struggling I was able to install Haykuro Rogers dream, after that I want to SPL 1.33.2005, Rooted my phone and I installed cm-5.0.7-DS-test5 Rom.
All is fine now thanks for the response.

Ive got exactly the same issue, formatted SD to FAT32 and copied DREAIMG.nbh (RC7) to it. I get the not allowed error and then drop to the multi colored screen with:
DREA110 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-2.22.19.261
Sep 2 2000
Serial 0
I am trying to follow the instructions on the cyanogen wiki to install Cyanogen 5.0.7 on a stock Dream purchased in Australia.
Any pointers will be appreciated, I have tried to reformat, different SD cards without any success.

chocko said:
Any pointers will be appreciated, I have tried to reformat, different SD cards without any success.
Click to expand...
Click to collapse
Because the nbh is for T-Mobile in the states.. thus fails the carrier checks elsewhere in the world.
To get around these checks a goldcard is needed.
But before looking into that.. make sure you can't root by flashreq first. (I can't say I've used the Australian rom so I'm not really sure of your phones state.. the gold card will let you flash that nbh.. but if you can install recovery by flashreq that is safer)
It's usually best to search for people who have rooted the same stock rom as is installed on the phone.

i have a tmobile g1 its giving me the same error code"0002802" when i try to flash the DREAIMG.nbh file from bootloader. so i cant downgrade to rc29. i want to root the phone.any solution?

Haad said:
i have a tmobile g1 its giving me the same error code"0002802" when i try to flash the DREAIMG.nbh file from bootloader. so i cant downgrade to rc29. i want to root the phone.any solution?
Click to expand...
Click to collapse
I answered this best I could here
With both a potential solution:
Did you try a goldcard yet? what was the result?​
And a question to help understand why:
Did you answer my question last time of when your phone was jtagged was it with my solution in the wiki or Omnia's solution?​

Okay I have the same problems as the op and I have the same radio, spl everything is exactly the same. The phone cannot boot into recovery whenever it starts it goes directly to bootloader. Any help would be appreciated. Thanks in advance.

Not even downgrading
Hello guys,
I tried already one goldcard, made all the procudures to get one and also didnt work, with the gold card says that no IMG not found, with the DREAIMG from USA and EU says that is 'not allow'. I tried as well the DREAIMG.nbh from USA and EU. I bought my phone in Holland, and his configuration is:
DREa110 PVT 32B
HBOOT-0.95.000
CPLD-4
RADIO-1.22.12.29
If you can help me another way out. I'ven been try and I am stucked on this for 3 days.

0002802
strange, in my case I got a phone which I did not know if it was from Europe or the US. I just happened to get the "0002802" error when using what I assume to have been the wrong firmware (European in my case) as when I tried the US version everything worked fine.
Though for the Rogers phone the whole process seem slightly more complicated (check the Cyanogmode wiki for it under Full_Update_Guide_-_Rogers_Dream_EBI1 -- sorry Im new here and I cant post a link =D)

[Q] 32a magic mytouch 3g unable to get to recovery

I have searched for a while and found different answers and have tried several solutions but I make no progress. What am I doing wrong?
I have a myTouch 3g 1.2 with this on my hboot page:
Sapphire PVT 32A SHIP S-ON H
HBOOT - 1.76.0010 (SAPP31000)
CPLD - 13
RADIO - 6.35.10.10
Jan 14 2010,00: 14:58
Summary:
-Bought mytouch brand new with T-Mobile
-Flashed clockwork mod and rooted previously successfully creating a gold card, recovery, and flashing ROMs
-Factory reset for clean wipe and froze
-I could get into hboot and fastboot no problem and even get my computer to recognize the device
-A "friend" tried his luck and gave it back to me resulting in the bootup screen being Rogers and unable to be recognized by my computer
-I can still flash SAPPIMG however results in "Main Version is Older" update failed. From the tutorials I read I needed to create the gold card. I did that after formatting fat32 with a kensington 2GB card.
-I have tried to flash the Engineering SAPPIMG also, but it gives me the same response.
As of now I still have access on the phone to hboot and fastboot but am stuck as to how to get the phone to take an update file.
Help! Please!

So you've got the myTouch with the 3.5mm jack, correct? If so, go smack your "friend" for being an idiot and tell him to be glad he didn't brick your phone. If your getting "Main Version is Older" there's something up with your goldcard. You don't have the goldcard you created when you originally rooted?
At either rate, once you get your goldcard squared away, just use my guide to essentially re-root, but in your case get your phone fixed too. Here's my guide to follow. Since you already know how to flash ROM's and such, you of course can opt out of installing CM 6.1 and use whatever ROM you want. Just use the guide up to step #9.

DonJuan, are you sure the goldcard fixes the Main version is older problem? I thought it only fools hboot into thinking you have SuperCID (can install ROMs for any region).

AFAIK, it's suppose to also force the phone to bypass the version check as well.

Thank you for the quick response. I thought that I had the gold card equipped. I used the goldcard.img from when I had previously made a gold card with the same phone and memory card so I assumed that nothing would have changed. I opened the HEX editor and changed the lines 00 to 170 with the gold card image and saved it.
With my phone being the way it is, would the gold card have changed at all? Or is it device specific?
I'm going through the process carefully this time to make sure I do it right. I appreciate it!

Sounds like your good. The goldcard.img is specific to the SD card, so as long as its the same one you should be good.
Sent from my HTC Magic using Tapatalk

[Q] bricked phone i think i have exhausted all options

i have a mytouch 3g. belives its the fender edition but white from what i have been reading.. i got it this way from my friend, ive tried the gold card option, though i dont have this phones cid i used my buddys from another mytouch 3g. it still says model id incorrect when i try to flash sappimg, ive tried switching it from .zip to .nbh which i have been reading sometimes you dont have to have the goldcard. ive tried all different kinds of sappimg's nothing works. it either says model id incorrect or something about it being to old firmware wise. i can get into fastboot and hboot so its not a total loss yet i dont think. when i turn the phone on regular it stays on the vodafone slash screen. and i have also read that it should be because he flashed the wrong radio, firmware that wasnt compatible? ive tried just flashing a recovery but wont let me. keeps trying to flash sappimg even if not present. i have 2 sd cards one is a sandisc and the other is pny could that be the issue, do i still need the kingston even though they both still read after the gold card process. i am at a complete loss if someone could please shoot me in the right direction that would be great.
this is what it says on the hboot/fastboot screen:
sapphire unknown 32A ship s-on h
hboot-1.33.0009 (sapp31000)
cpld-13
radio-3.22.20.17
may 8 2009, 21:02:32

All the symptoms indicates a faulty goldcard or wrongly preparation of the same.
Let's start with the basic....
You do not have the optimal radio for your device.
You have "cpld-13" which is a hybrid between the 32A and 32B. You have the ram from the 32A but use a 32B radio.
The radio you have is for the pure 32A devices.
To fix that, you need to flash "something" using the goldcard. Why?
Because the spl you currently running on the device is "perfected; with other words, it will NOT allow you to flash anything... that's why you get denied every time you try to flash.
The goldcard will circumvent this by letting you flash any signed update package (sappimg.zip/nbh) which matches the current version of the firmware or anything higher. The good thing about the goldcard, is that it will bypass the id check. This way you can flash packages meant for a different device, which properly is the cause to why you have a mismatched radio/spl combo. If you get an error regarding the version nr, you are properly trying to flash something which has a lower version than what is already running on the device.
Referring to your statements from the OP, the "model id is incorrect" indicates that you have a faulty goldcard, because the essence of such a card is to circumvent that issue.
Changing from zip to nbh or the other way around will not help because the problem is in the foundation(the goldcard) or in the execution(the preparation). This also indicates the following:
1) You are working in the blind (flashing god knows what - NOT RECOMMENDED)
2) You are desperate
3) Lacking basic knowledge about problem at hand.
All not very wise when dealing with "exhaustion" of all possibilities(as mentioned in the title), because the problem-definition is based on merely speculations.
Enough with the "wise ass" lectures... let's do something constructive.
Start by issuing the following:
Code:
fastboot getvar version-main
The above will determine which version the device is running. Based on that, we can find the appropriate sappimg for you to flash.
The second thing you can do, is to take a look at the first 5-7 sticky threads. There are a lot of useful information. Also a thread handling specifically your device.
Post the result of the above command and we can take it from there..
Good luck

i type the code and it just sits their waiting for the device???

ok i reinstalled the sdk bundle and got it to work...
version-main 2.53.707.2

OK.... follow this guide:
http://forum.xda-developers.com/showthread.php?t=734617
It's located within the first 8 threads of the general section.
A working goldcard is a MUST.
But it should fix your problem completely :0)

cool thanks is there a way to get my cid threw fastboot? or what would be the best way like i said i have the pny and sandisc mircro cards i can go threw making. ive done it like a million times with no success. or could it just be the cards should i just get a kingston card and try it again? i have a cid from a friends phone but maybe its a bad number or something. not sure..

You can use any android device to get the cid of the sdcard.
Fastboot is not possible to use.
You must remember, that the cid you get is on valid for the sdcard you read it from. You cannot interchange cid to another sdcard.

oh the insanity

cant believe im posting this but here it goes.
couple days ago i had a working phone(mytouch 3g us) running on yoshi rom. now i cant even get into recovery. pwr+home. but able to fastboot.
I had sapphire PVT 32B ship s-on g
HBOOT- 1.33.0013d (sapp30000)
cpld-10
radio 2.22.27.08
oct 21 2009
so i was able to get S-OFF and install eng rom 2005
Now **** hit the fan. Since i couldn't get into recovery i was able to use fastboot commander. tried to fix what i did and now this is what i have 3 days later of trying to get it back to normal. Failure sums it up!!
sapphire PVT 32A ship s-on g
HBOOT- 1.33.0013d (sapp30000)
cpld-10
radio- 6.35.16.19
oct 21 2009
I get into fast boot and i cant even update anything. i try and it says check signature failed. What ever nbh file i put on the phone it gets stuck on updating radio, bar is almost filled to the top but sits there forever, till batter dies.
Any help would be great thanks in advance

Omg. Why did you flash inappropriate radio? Only magics 32a are compatible with 6.35.xx.xx
You can try flash ruu 2.53.707.2 from my library: http://forum.xda-developers.com/showthread.php?p=6109097 (requires goldcard)
It has eng hboot and you will able to restore 32b combo next step, but chances are so small...
P.s. If you will have success with 2.53.707.2, then I will write next step. Do not do fast actions.
Sent from my A7-040 using Tapatalk

This issue has been answered multiple times, and I personally have spent many hours solving and documenting the issue.
Do a search and you will conquer :0)

hey i tried that ruu it gave me wrong id for the phone..
since i have the tmobile i tried 54) 3.12.531.1 T-Mobile USA FRG83D
and been waiting for the radio to update been its updating at 55%
what other ruu can i try?
Mum i tried a search any hints as to what ot search for specifically via your user name
thanks

mumilover said:
This issue has been answered multiple times, and I personally have spent many hours solving and documenting the issue.
Do a search and you will conquer :0)
Click to expand...
Click to collapse
i found some of your posts i cannot adb at all only fast boot. i installed the adb drivers and could never get adb devices to list anything. only fastboot devices worked.
i even tried the above ruu posted and now im stuck in ruu

what is on your screen now? ruu mode?

kayelzhl said:
what is on your screen now? ruu mode?
Click to expand...
Click to collapse
yess can you say paper weight!?!! haaha

check your pm

Has this story success?

5[Strogino] said:
Has this story success?
Click to expand...
Click to collapse
no. unable to create gold card and still stuck in ruu. guess the phone is a gonner

tlipur said:
no. unable to create gold card
Click to expand...
Click to collapse
You can create goldcard with any HTC phone. Ask friends, neighbors. This operation is safe. You need insert your own sdcard to friend's phone, read cid, generate goldcard image and paste it onto your sdcard.

5[Strogino] said:
You can create goldcard with any HTC phone. Ask friends, neighbors. This operation is safe. You need insert your own sdcard to friend's phone, read cid, generate goldcard image and paste it onto your sdcard.
Click to expand...
Click to collapse
What really was not aware thought it would have to be done by the same make model phone.
Ok ill try to make a gold card have a droid incredible that i can use.
After i make the gold card what would i need to do next? Im still stuck in ruu with a chip at the bottem with a circle and line going through it.
Thanks

tlipur said:
What really was not aware thought it would have to be done by the same make model phone.
Ok ill try to make a gold card have a droid incredible that i can use.
After i make the gold card what would i need to do next? Im still stuck in ruu with a chip at the bottem with a circle and line going through it.
Thanks
Click to expand...
Click to collapse
make a gold card, use the guide one the page "htcdev",(i cant post address) it will kick your phone out of RUU, if you are lucky enough to have a custom recovery before you got into this problem, then you can bring your phone back to life. btw, i have a magic 32A and stucked in the ruu before.

kayelzhl said:
make a gold card, use the guide one the page "htcdev",(i cant post address) it will kick your phone out of RUU, if you are lucky enough to have a custom recovery before you got into this problem, then you can bring your phone back to life. btw, i have a magic 32A and stucked in the ruu before.
Click to expand...
Click to collapse
Whenyou say guide is it for making the gold card or to get out of ruu? If its a guide for the gold card I'm going to use the one posted on addictive tips. Gold card made what's the next step?
How long did it take you to get it out of ruu ?

Mmm... http://forum.xda-developers.com/showpost.php?p=23599950&postcount=2

tlipur said:
Whenyou say guide is it for making the gold card or to get out of ruu? If its a guide for the gold card I'm going to use the one posted on addictive tips. Gold card made what's the next step?
How long did it take you to get it out of ruu ?
Click to expand...
Click to collapse
no, gold card is easy to make when you have an android device, the guide i mean is how to kick your phone out of ruu, which may need a gold card. so before you do the guide on htcdev, make the gold card first. since i cant post address here, i will pm it to you about the guide.

5[Strogino] said:
Mmm... http://forum.xda-developers.com/showpost.php?p=23599950&postcount=2
Click to expand...
Click to collapse
heya i tried running the ruu and it not able to find my phone. im able to fastboot devices and get it listed. i tried running it before the first time and i think it picked it up. i ran the tmobile one just to see if it picks it up and it did.
im going to try another pc real quick; Ok tried the other pc same result, t mobile ruu picked it up.
Went back to 1st pc uninstalled all driver programs related to phone. cleaned out registry and temp.
Checked with USBDeview, non listed. installed drivers that are from sdk tools, android bootloader interface.
ran it again still dident pick it up but tmoible ruu again picked it up.

So its. Gonner then eh?

0. Go into fastboot mode
1. Check connection by command
Code:
fastboot devices
It should return serial number
2. Run RUU 2.53.707.2
3. Navigate to windows temporary directory and search for rom.zip
4. Check twice that is 2.53.707.2 archive (you can unpack files and view hboot via notepad, you will see something like 1.33.2010 ENG S-OFF)
5. Copy rom.zip into folder with fastboot.exe (from Android SDK Tools), close RUU
6. Run
Code:
fastboot flash zip rom.zip

Just gave it a shot it passed sig, header,info then stopped at checking model id
Remote 41 model id check fail.
I used gold card tool 0.0.5 to get cid then went to rev skils dl the image and used the same prog to create the gold card via patch mmc.