Related
Hi All,
I have tried searching for the answer to this question and cannot find it, though I am sure I wont be the first to have had this problem.
I am trying to flash a new rom on my touch HD, have tried two different ones - duttys and black pearl. I have managed to get the upsl to work in the bootloader but i cannot get a rom to boot from the SD card. I have followed the instructions on the pages with the roms (same in each) and all i see is a screen flash up after running uspl saying "no image file" then it goes back to the bootloader screen.
In order to get out of bootloader I have to remove my battery which i assume is normal and then it goes back to the normal spl.
I am pulling my hair out on this one - and I dont have much to pull on!
I didnt think it would be so hard with all of the instructions about!
What want you do?
What stage has you done?
I wanted to load duttys rom using upsl but unfortunately I couldnt get it to work so I used the program that comes with the rom to load it in without using bootloader.
I had to load on Olinex to make it work
I had a similar thing the other day when I was having a blonde moment. Renamed the image file BLACIMG.nbh, instead of just BLACIMG......so the actual file name when I looked in to it was actually sitting as BLACIMG.nbh.nbh
Once I'd deleted the .nbh extension out of the file name I renamed it worked.
deafpotato said:
Hi All,
I have tried searching for the answer to this question and cannot find it, though I am sure I wont be the first to have had this problem.
I am trying to flash a new rom on my touch HD, have tried two different ones - duttys and black pearl. I have managed to get the upsl to work in the bootloader but i cannot get a rom to boot from the SD card. I have followed the instructions on the pages with the roms (same in each) and all i see is a screen flash up after running uspl saying "no image file" then it goes back to the bootloader screen.
In order to get out of bootloader I have to remove my battery which i assume is normal and then it goes back to the normal spl.
I am pulling my hair out on this one - and I dont have much to pull on!
I didnt think it would be so hard with all of the instructions about!
Click to expand...
Click to collapse
Did you remove storage card before entering Bootloader screen? Put storage card in after Bootloader is up and before opening USPL.
USPL HowTo
Sorry to ask again.
I had the same problems.
As I couldn't do with USPL (just did not find reasonable step-by-step instructions), I used OliNex HardSPL which worked fine.
But now with new ROM updates, I face significant problems with display color and radio not working.
So, I actually definitely need and would like to ask somebody to take the time to post ...
step-by-step instructions on how to use USPL
PLEASE !
USPL HowTo
Obviously, I just missed out one point and needed to change another.
But for those in the same situation:
Probably only works on Windows XP, didn't work on my Vista PC.
(1) Download the latest USPL (currently 2.5)
(2) extract anywhere on your computer
(3) Go to ActiveSync properties and disable "Allow USB Connections" option
(4) Turn off your device (long press "Power" key or remove/replace battery)
(5) then enter SPL bootloader mode (tri-color)
- Blackstone: when device turned off by pressing and holding "VolDown" key plus "Soft Reset" simultaneously
- did NOT work for me: by pressing and holding "Power" and "VolDown" keys simultaneously.
(6) Connect USB cable and make sure "USB" label appeared in the white portion of the screen on your device.
(7) start / run "cmd" (DOS console) on your desktop PC
(8) Execute blac_uspl.exe in DOS window
current status and any error messages USPL encounters will be displayed in the console window.
(9) If everything goes well, your device will restart and SPL version label should read "1.15.USPL" indicating that USPL was loaded successfully.
You ever read through the USPL thread?
stepw said:
10. How to use it?
Download the latest USPL attached to the second post of this thread and extract anywhere on your computer.
Go to ActiveSync properties and disable "Allow USB Connections" option. Turn off your device (long press "Power" key or remove/replace battery), then enter SPL bootloader mode (tri-color) by pressing and holding "Power" and "VolDown" keys simultaneously.
Connect USB cable and make sure "USB" label appeared in the white portion of the screen on your device.
Execute blac_uspl.exe; current status and any error messages USPL encounters will be displayed in the console window.
If everything goes well, your device will restart and SPL version label should read "1.14.USPL" indicating that USPL was loaded successfully.
If SPL version does not include "USPL" or if the screen is black, soft reset and try again. If "USB" label disappeared and did not reappear, reinsert USB cable.
You can then start RUU update to flash RUU_signed.nbh. Once RUU update is completed, device will restart using regular flashed SPL.
If you want to flash from SD card instead, make sure your SD card is not inserted when you enter the bootloader originally.
SPL will try to install it and would fail if blacimg.nbh is not signed by HTC. Insert the card after "USB" label comes up in SPL but before running USPL.
You can run "blac_uspl.exe ?" to get command line parameter help. Only 1 parameter is accepted and that is the name of an SPL file you want to load. You can load an MFG SPL or HSPL. USPL automatically takes care of allowing unsigned/cooked ROM flashing with any SPL you use.
Click to expand...
Click to collapse
Should be just clear, isn't it? Have used it a few times, without any problems ...
No, it probably wasn't clear enough.
At least it didn't work for me.
see the changes I applied above (plus minor additions)
remove the memroy card!
the first time i tried the upgrade, it failed... because my memory card was inside the phone. worse, the mem card contains the rom upgrade file.
pls remove the memory card first.. then run the ruu update.
after which, it will state that rom is 1.15.
then can insert memory card (only if u see the USB word on your phone)
then can re-run program.. and update firmware..
I have experienced this problem where no image file was found when flashing from UPSL. I think this is some kind of random **** that happens. I have flashed countless ROM with this method and sometimes this **** just happens without any reason.
hi, how come my tri-color bootloader only shown "Serial" in the white portion of the screen? Is there something wrong with my HTC HD phone? I try to reflash the ROM thru this way since ActiveSync cannot detect my HD. My HD phone only shown battery charging whenever I plugged in the mini-USB cable into the computer.
Anyone can enlighten my issues? Thank you in advance!
I met the same issue, and I solved it by re-formatting the card using FAT32.
MOD EDIT
I'm closing this thread as dummies guide, USPL & HSPL threads already exist.
If your having still having difficulties post your query into relevant thread. I'd suggest you start with dummies flashing guide thread.
Thread closed
Hi there,
Hope you can help me...
Since i bought my Cruise, I flashed it to the newest ROM version of HTC and it automatically installed SPL 3.13 with.
The problem is that if I want to install the WM 6.5 rom, I have to "Downgrade" My SPL version from 3.13.0000 to 2.20.
I followed the steps explained by "Olipro", but when the upgrade starts, RUU kills activesync (seems to be normal) and when the phone normally reboots in bootloader mode (like when you flash a new rom), nothing happens. The phone didn't shutdown and tries to establish a new USB connection !
I tried to turn manually the phone in bootloader mode on to force the SPL update, but the % bar stays at 0 and RUU returns a communication error (262).
I tried also to install the wm 6.5 rom without install SPL 2.2, but it crashes (stays @ 0% too)
I don't know how to install this stinky version of HARD SPL.
Heeeellllpppp !!
NOTE : I tried with or without µSd, does the same thing.
Thx
hmm try disabling firewall and antivirus one of them may be blocking the connection. Thats my only thought about it.
Thank you for the answer but it don't work...
Nobody can help me ?
Try to extract the files from the newest htc rom to a new folder, and then copy the "RUU_Signed.nbh" from the SPL V2 folder to the extracted files (to the new folder) and run the "ROMUpdateUtility.exe" from the extracted files (from the new folder).
nope ...
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Pixel69 said:
Please, consider my asks...
I know there is necessarily a solution but I have not yet found.
I don't know where/why it is crashing.
What does the HTC need to downgrade the hardspl ?
Is there a protection that can't be bypassed with the 3.13 ?
The only thing that I can do atm, is flashing the official HTC rom (useless ^^).
The actual version of my rom is :
_HTC Touch Cruise_RUU_Polaris_HTC_FRA_3.13.406.0_radio_sign_25.85.30.07_1.59.42.15_Ship
Thanking you in advance...
Click to expand...
Click to collapse
HSPL 3.13? In this ROM is ver. 3.13 drivers, not HSPL... If you have original ROM and you dont install Olipros HPSL, you have original HTC SPL...
When I enter bootloader mode, the HSPL version is : 3.13.0000
Of course it's the original htc HSPL.
The problem is that I can't downgrade it to the olipro's version : 2.20.
Did you try it on other PC?
2 PCs, 2 USB cables..
The official rom upgrade works fine, I dont think that the problem comes from the computer.
definite guide:
1. establish a connection with activesync via usb (orbit2 to pc)
2. start the romupdateutility provided in hardspl folder.
3. before it starts flashing, you need to also follow on-screen instructions on orbit2!!! execute jump-spl and stuff: click yes on orbit2!!
4. when the orbit2 states: Replug USB. you need to plug the usb-cable once off and then put it back to connect to your pc.
5. it starts flashing and restarts after its done.
Hi Manaaa,
I don't know what is jumpslp ??
I found it on the web (xda..), copied it in my "my documents" folder, ran it but it asks me a jump address (default is 0x00000000) and an spl (*nb) file..
What is jump spl ? What is the address to jump to? and where can I find the *nb file ?
In the olipro's hspl folder is only a *nbh file.
Thank you
I wouldn't recommend using a jump spl for our phones if there isn't one in the Hardspl Pack then one is not needed to be run.
Personally im still really confused by this so if i get it straight.
You are synced with activesync.
Run the file for Hardspl Run RomUpdateUtility.exe
Then go though. It switches off activesync.
Then what?? Exactly Does it ask you to replug the cable? Do you get the rom flash screen (with %) at all??
Also i dont think that spl flashes can be run from the booloader as it has to be a modded bootloader (jumpspl if you will), loaded by the program to be able to flash the new hardspl.
Also i know very little on this, this is as much as i understand it to be.
chris10230 said:
You are synced with activesync. OK
Run the file for Hardspl Run RomUpdateUtility.exe OK
Then go though. It switches off activesync. OK
Then what?? Exactly Does it ask you to replug the cable? NO
Do you get the rom flash screen (with %) at all?? NO
Click to expand...
Click to collapse
Normally, after killing activesync, the phone turns into bootloader mode. Mine stays in winCE and tries to establish new usb connection...
I also decided to force manually bootloader mode and killing activesync by myself.
I ran RUU again, it first checked the phone state (such as battery >50%, connectivity...)
CHECK : OK
Next step, by clicking "NEXT" on the RUU interface, the phone turns in "% mode" and the update starts but stays at 0%.
After a while, RUU returns an update error (such as 262).
Noway to flash hardSPL :'-( , v3.13 seems to be "write protected".
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
Click to expand...
Click to collapse
That is what error 262 is but really dont see why this happens either. And since you can boot into windows its not much help.
So it just wont go to flash it when you click it through, hmm
Your last resort would be to PM cmonex as she will have helped make this with oilpro. Ask and see if she can shed some light on this one. Maybe something has gone wrong somewhere (quite likely) that we don't know how to fix.
Stupid question but have you tried downloading, unzipping it again? May have been a bad dl... or unzip
Have tested it with about 10# DLs...
I PM'd Olipro, waiting for a response now
Flash back to HardSPL and don't Re-Plug
Hi Pixel,
Herewith are guide for you
1) Flash back to HardSPL and don't re-plug until end of session (5 minutes)
2) Flash back to original SPL 3.13 on this post . This original SPL for HTC Touch Cruise only
3) After you do this you cannot flash with other Cooked ROM or Shipped ROM
with different ID, unless you flash back to HardSPL
Good Luck my friend
I have exactely in the same configuration as Pixel69 with the same result.
I've tried to an other PC without any change.
Has somebody any idea?
Just had an idea what OS are you running to do it?
If its not 7 may not be fully compatible... Shot in the dark really
Where do i find it?
Searched for a long time
Why do you need it?
You can't get it on it's own, you need to flash a stock ROM using the SD card method to get the stock SPL on. If you turn off your phone, hold down the vol down button and turn it on you go into the bootloader - what SPL version is listed in there?
(to get out of the bootloader, take the battery out for 5 seconds and put it back in)
my spl: 1.66.0000
i have updated my hd2 rom once (original update).
You'll need to get a 1.48 ROM and flash back to that using the sd card method to get back to SPL 1.42. Then you can put HSPL on the phone and upgrade again using the activesync method and you'll be ok.
You can get the 1.48 ROM here, just put in your serial number:
http://www.htc.com/nl/SupportDownload.aspx?p_id=297&cat=2&dl_id=804
Then follow these notes:
Flashing Via MicroSD Card
NOTE (PLEASE READ): If you flash a Stock Rom via microSD Card then it will overwrite your HardSPL with a stock SPL included in the nbh file. Therefore if you flash a v2.01 or later Rom (with SPL2.*) you will NOT be able to reinstall HardSPL onto your device and could end up bricking it. This does not apply to custom roms as they do not include an SPL. BE CAREFUL!!
1. Make sure your microSD is Formatted to fat32 (you dont have to delete all files but it is safer if you do)
2. Download your prefered Rom from the LEO Rom Develpoment Page and unzip/unrar it to your PC
3. Goto the Roms Folder and rename the .nbh file to LEOIMG.nbh
4. Copy the LEOIMG.nbh file to the root of your MicroSD Card
5. Plug the MicroSD Card into the phone
6. Reset the device while pressing the volume down button to enter the BootLoader screen, you will first see a tri-color screen with the phone and SPL Information at the top
7. Follow the On Screen instructions to start the update
8. After flash has completed, press the reset button with the stylus to reset the device.
Wiki and Sticky....
Hey There,
Look to the WIKI and STICKY
All you need is there.... yeah with a real video for beginners...
Grtz,
PS MOD close this....
thnx i know how to get it done now!
Thank you EddyOS, i will also try this since i get "invalid vendor ID" when doing it via USB cable. Hope it works
EDIT: Dang, didnt work "Loading ... Not Allow" + back to bootloader
Help
Hi,
I need to find SPL 1.42.0000 for my leo, swedish.
The link in the previous post didnt work for my SerialNo =(
you can't get just the SPL - you need to flash the stock ROM for your region.
and the link wouldn't work as it was the Dutch HTC site - try here:
http://www.htc.com/se/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Taken from my Rom Flashing guide:
2. FLASH HARDSPL2 (REQUIRED!! DO THIS BEFORE ANYTHING ELSE)
The Original HardSPL Thread is *HERE*
IMPORTANT: To install/uninstall this HSPL there must be any SPL version from this list on your device:
SPL 1.42.0000, SPL 1.42.HSPL, SPL 1.62.0000, SPL 1.66.0000, SPL 1.66.HSPL,
SPL 2.07.0000, SPL 2.08.0000 SPL, 2.08.HSPL
NOTE: If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first
NOTE: Turn OFF any AntiVirus Program first as it WILL interefere with the flash (there is NO harmful code in the program)
Flashing via ActiveSync with USB Lead (thanks to Bepe)
1. Download HardSPL package from *HERE* and extract to an empty folder
2. Synch Phone with PC in Windows Mobile!!! It has to be connected to activesync or WMDC via USB cable
3. Run HSPL2_RUN.exe from your pc and read all the text carefully
4. When finished click next in the HardSPL program
5. The program will now check the usb connection and enter the bootloader screen (tri colour)
6. NEW: YOU CAN NOW CHOOSE WHICH VERSION OF SPL OR HARDSPL YOU WANT TO FLASH TO YOUR PHONE!!
7. Select your desired HardSPL and click NEXT.
8. HardSPL will now be flashed to your phone.
5. When its finished the HardSPL program will pop up a box saying "successfully Done".
6. Click ok to terminate program and reboot the phone.
7. Congrats, you just flashed HardSPL.
EddyOS said:
you can't get just the SPL - you need to flash the stock ROM for your region.
and the link wouldn't work as it was the Dutch HTC site - try here:
http://www.htc.com/se/supportdownloadlist.aspx?p_id=297&act=sd&cat=all
Click to expand...
Click to collapse
You can flash just the SPL now
Mark.
Spl 1.42.0000000000
Could someone Just send us the link to where this stupid SPL 1.42.00000 that everyone needs for it to work is? We can't find it anywhere????
Where is it?
We not how to load it we need the file!!!!
[email protected] said:
Could someone Just send us the link to where this stupid SPL 1.42.00000 that everyone needs for it to work is? We can't find it anywhere????
Where is it?
We not how to load it we need the file!!!!
Click to expand...
Click to collapse
you are showing your ignorance by getting all demanding, if you had read anything, you would know that spl is part of all official roms.it is not a file in its own right.
the only reason you would be looking for it is if you have a telstra, cos hspl2 works on any spl. in which case you need the 1.49 telstra rom, flash it from sd card and it will downgrade your spl to 1.42
if you don't have a telstra, then you are looking for something you don't need.
i cannot seem to flash my phone! D: it's irritating me greatly...
allow me to tap out my phone for you.
rgb screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
i can't flash roms till it's hspl-ed.
hspl2 says i have a bad model number?
i have the US TMO HD2, 512 rom, not 1gb rom.
pretty sure it's only 512, cause with OS running, i check about system, it says i have 4hundred and something avail.
i've tried everything.
i can't even locate a copy of 1.66 rom so i can install 1.42 spl, cause htc says my model number isn't suitable for the rom i try to download.
basically, i'm F%$KED. and i need helps.
please, respond! i just wanna hack this POS winmo 6.5 shiz to something cooler.. D:
ijoshv2 said:
i cannot seem to flash my phone! D: it's irritating me greatly...
allow me to tap out my phone for you.
rgb screen:
PB81120 SS-B3
SPL-2.08.0000 8G XE
MicroP(LED) 0x05
MicroP(TOUCH) 0x40
i can't flash roms till it's hspl-ed.
hspl2 says i have a bad model number?
i have the US TMO HD2, 512 rom, not 1gb rom.
pretty sure it's only 512, cause with OS running, i check about system, it says i have 4hundred and something avail.
i've tried everything.
i can't even locate a copy of 1.66 rom so i can install 1.42 spl, cause htc says my model number isn't suitable for the rom i try to download.
basically, i'm F%$KED. and i need helps.
please, respond! i just wanna hack this POS winmo 6.5 shiz to something cooler.. D:
Click to expand...
Click to collapse
Maybe this posting here will help you to get answers to your questions...
htc hd 2
is not working for mi my freind , it just get the color on the phone and them the program say error , can you help me my SPL-2.08.0000
walasquin55 said:
is not working for mi my freind , it just get the color on the phone and them the program say error , can you help me my SPL-2.08.0000
Click to expand...
Click to collapse
do you have a tmous phone? in which case you need hspl1024 (see my sig)
if not, try different usb ports, especially try to use one around teh back of the computer
also, dont forget to right click hspl and 'run as administrator'
nO it does not work that way!
Would be a lot easyer if you just gave us the file 1.42.0000.nbh so we could add it to our SDcard and flash it without it locking or not working! Please I beg you send us over the 1.422.0000 file all by itself!
PLEASE!!!!
tictac0566 said:
Maybe this posting here will help you to get answers to your questions...
Click to expand...
Click to collapse
I have the same problem and so does everyone else, they no the files don't work and they won;'t give us the EXACT 1.42.0000.nbh file so we can SD card flash it!
It would be so simple!!!!!!
ok then
samsamuel said:
you are showing your ignorance by getting all demanding, if you had read anything, you would know that spl is part of all official roms.it is not a file in its own right.
the only reason you would be looking for it is if you have a telstra, cos hspl2 works on any spl. in which case you need the 1.49 telstra rom, flash it from sd card and it will downgrade your spl to 1.42
if you don't have a telstra, then you are looking for something you don't need.
Click to expand...
Click to collapse
How come someone sent over a SPL 2.08.0000 which mine used to be 2.10.0000 and that worked just fine, why wouldn't sending over a file 1.42.0000 just like they did with the 2.08.0000 do the same... IT WOULD!
Hi I am using the 3.15 ROM so my SPL is 3.03 and I need to downgrade to something in
this list below
Code:
SPL 1.42.0000 SPL 1.42.HSPL
SPL 1.62.0000
SPL 1.66.0000 SPL 1.66.HSPL
SPL 2.07.0000
SPL 2.08.0000 SPL 2.08.HSPL
However when I go to the HTC site for the uk and pick the earliest HTC HD2 VODAFONE (UK) ROM (version 1.74) it won't install it says the usb cable is not connected even though it blatently is fine. IF I simply use my SN I get a list of *one* from HTC. If I go up a level to all available downloads I can scroll through and hand pick about 4 or 5 roms. So. I am going to systematically reapply all the HTC UK VODAFONE ROMS tonight to see if ANY of them take but I fear they will not.
So...
How can I downgrade? People talk about it but to be honest I think there needs to be some clarity aon all of the following issues.
How to downgrade SPL when it isn't available on the HTC site
How TO install HSPL
HOW To uninstall HSPL
Go to HD2 WinMo Development, there is a thread lists all the OEM ROMs .. Pick yours (1.42 or 1.66) and run the exe .
If it still says cable not connected then rename .exe to .zip and extract the rom and rename it to leoimg.nbh, put it on your sd card and boot into bootloader.
My way
Before I went to work today, I had deliberately flash my HD2 with the latest ROM. and consequently, my SPL was upgraded to the 3.03... I downloaded the old one from HTC..ROM 1.66 and flash it like normal on my HD2..as in just running the program
To my surprise...my current SPL after the ROM downgrading is back to the awaited 1.400
so..please find a way so that your HD2 can connect with the PC/Laptop and just run the program...
hopefully..it will do wonders..
After I tried to get my stock SPL back the phone it's not working anymore.
Always it starts in boot mode and Displaying this Message:
In the Right corner:
RUUNBH
Then I have:
BLAC100 32M
SPL-1.14.0000
MicroP-BlackStone (LED) v6
And after:
Upgrade ROM code error
Please try again
and if I do not have th sd carin at the bottom I have :
Serial
I have to say that I am running Windows 8 x64.
Please help me I really appreciate that!
PS: I have searched in the forum I cannot find any specific solution that worked for me.
Most, if not all, custom ROM (WM 6x) is not supported by the stock SPL 1.14.
I thought you had already flashed SPL 1.56 Olinex.
http://forum.xda-developers.com/showthread.php?p=41134106#post41134106
http://forum.xda-developers.com/showthread.php?p=41079640#post41079640
My recommendation is to revert back and re-flash HSPL 1.56 Olinex. See this link:
http://forum.xda-developers.com/showthread.php?t=505377&highlight=flash+hspl
Follow the steps patiently and carefully.
Make sure you login to Windows with an account that has Admin rights.
Remove your microSD from phone when you are flashing HSPL.
Sometimes you may have to do it a few times to get it right. At the end, your bootloader will say:
BLAC100 32M
SPL-1.56.0 Olinex
MicroP-BlackStone (LED) v6
At the white portion at the bottom, you will see Serial but it will change to USB if you connect it by USB cable to the PC.
I believe you do not have to re-flash the WM6x ROM. (I did not need to when I upgraded my SPL from stock 1.54 to 1.56 Olinex.
But if you still cannot run WX after the SPL 1.56, then you need to re-flash the WM6x ROM from microSD.
chan.sk said:
Most, if not all, custom ROM (WM 6x) is not supported by the stock SPL 1.14.
I thought you had already flashed SPL 1.56 Olinex.
http://forum.xda-developers.com/showthread.php?p=41134106#post41134106
http://forum.xda-developers.com/showthread.php?p=41079640#post41079640
My recommendation is to revert back and re-flash HSPL 1.56 Olinex. See this link:
http://forum.xda-developers.com/showthread.php?t=505377&highlight=flash+hspl
Follow the steps patiently and carefully.
Make sure you login to Windows with an account that has Admin rights.
Sometimes you may have to do it a few times to get it right. At the end, your bootloader will say:
Remove your microSD from phone when you are flashing HSPL.
BLAC100 32M
SPL-1.56.0 Olinex
MicroP-BlackStone (LED) v6
At the white portion at the bottom, you will see Serial but it will change to USB if you connect it by USB cable to the PC.
I believe you do not have to re-flash the WM6x ROM. (I did not need to when I upgraded my SPL from stock 1.54 to 1.56 Olinex.
But if you still cannot run WX after the SPL 1.56, then you need to re-flash the WM6x ROM from microSD.
Click to expand...
Click to collapse
Thank you very much for your answer!
I cannot run the uspl, blacuspl in Windows 8. Is there any change to run the blacuspl on WIndows 8?
It sais USB on phone's screen...
I wanted to install a spanish rom and cannot fint a 6.5 that is compatible with Olinex 1.65
chan.sk said:
Most, if not all, custom ROM (WM 6x) is not supported by the stock SPL 1.14.
I thought you had already flashed SPL 1.56 Olinex.
http://forum.xda-developers.com/showthread.php?p=41134106#post41134106
http://forum.xda-developers.com/showthread.php?p=41079640#post41079640
My recommendation is to revert back and re-flash HSPL 1.56 Olinex. See this link:
http://forum.xda-developers.com/showthread.php?t=505377&highlight=flash+hspl
Follow the steps patiently and carefully.
Make sure you login to Windows with an account that has Admin rights.
Sometimes you may have to do it a few times to get it right. At the end, your bootloader will say:
Remove your microSD from phone when you are flashing HSPL.
BLAC100 32M
SPL-1.56.0 Olinex
MicroP-BlackStone (LED) v6
At the white portion at the bottom, you will see Serial but it will change to USB if you connect it by USB cable to the PC.
I believe you do not have to re-flash the WM6x ROM. (I did not need to when I upgraded my SPL from stock 1.54 to 1.56 Olinex.
But if you still cannot run WX after the SPL 1.56, then you need to re-flash the WM6x ROM from microSD.
Click to expand...
Click to collapse
Thank you very much ! that driver update was the bad thing. I follow your instructions and it's works fine !
Thank you again !
oliviu said:
Thank you very much ! that driver update was the bad thing. I follow your instructions and it's works fine !
Thank you again !
Click to expand...
Click to collapse
I'm glad it turns out fine for you. All custom ROMs 6.5x (as well as Android 2.x) for Blackstone will need SPL 1.56+. Presently, it seems that this 1.56 Olinex version is probably the only stable one and last to be developed for this phone. There are already so many other alternative phones at the same price range but with higher specifications so I don't think many people will want to buy this phone (new) anymore.
The phone hardware (processor, memory) is pretty much limited to WM 6.5x, or Android 2x, so we will have to live with it. The only other alternative is to get a newer phone.
And hey, don't forget to press the Thanks button, for any contributions from this forum, if you find them helpful or useful.