[ISSUE] [SOLVED] 3.5 Audio headphones not working after ROOT!! :S - XPERIA X10 General

Hi.
After doing the root method posted yesterday, i found, today, going out to
street, that my standard 3.5-miniplug audio headphones don't work at all!
Before ayone suggests, of course i tried more than 5 different headphones, which are working fine on other phones. I tried both using the mic-included original sony cable, and third party ones.
I also tried to reboot, several audio apps, but not even system sound works. It's like Android never notices that there is something plugged onto audio jack.
Anyone experiencing this? Please kindly someone test it and feedback... :S
NEVER MIND... I found Post #6 of Guide thread... turned out i searched 'headphones' not 'headset' as biktor_gj wrote... (that's for the 'use the search !!!!!!') shouters'

Related

Audio problems using new gps rom

not sure what is wrong...but after upgrading to the new gps rom i don't have any sound output when using headphones or and aux cable in the car. any ideas what could be wrong? perhaps there are some audio drivers or something missing in this new rom?
any ideas? thanks.
bump.
im having the exact same issue here.
works with the headset that was included with the phone but my aftermarket mini-usb to headphone jack adaptor doesnt work now
First post (been lurking awhile) - have the same issue, with a twist. Running the newly released 3.16 and the OEM HTC headset works with calls/WMPlayer/system sounds. But, using earbuds connected via a mini-usb to 3.5mm jack converter, I can listen to voicemail (so SOMETHING is working) but not music/system sounds (like voice prompts from GPS software). Anyone have a fix? I need to be able to use my 3.5mm converter while on my motorcycle!
Are you using the stock ROM and customizations? Did you copy the edited audiopara.csv? I remember seeing somewhere that the old audiopara file may not be compatible with 3.16.
Prior to installing 3.16, I was using the stock 2.09 as received from the factory - no tweaks or mods - and the mini-usb to 3.5mm converter worked then, but doesn't work fully after the 3.16 install (stock 3.16 with customizations).
i still haven't been able to fix this. i am using dcd's 2.0 beta rom and i have seen people saying that the audiopara file needs to be replaced. i haven't figured out how to do this though i get an error that its in use and cannot be replaced. if anyone can help me out and post the correct file to replace and tell me how i'd appreciate it. still no audio via headphones.
I just tried this on my phone and it works fine. Maybe it is the software setup that I have that lets it work?
Running SRS WOW HD with CorePlayer 1.1.3. Also tried TCPMP.
I also have the same problem with wmp and unfortunately i can't offer any help as to what to do with this audiopara file.
jagwoods said:
I also have the same problem with wmp and unfortunately i can't offer any help as to what to do with this audiopara file.
Click to expand...
Click to collapse
you put the audiopara file in \windows afaik. i have done this. i am just waiting till i go to work (where my adapter is) to test. if it fixes it i will post back...
edit; didnt work for me
Replacing the audiopara file didn't fix anything for me, either.
yep, replacing the audiapara file didn't fix anything for me.
please keep in mind i am only referring to using an adaptor and then using standard headphones or an aux line out. this is a pretty big problem for me, if anyone finds a fix please let me know.
bump.
searched registry for "audio" founf an entry named audio-out and it has a subfolder named pin
sounds right but i dunno
also..checking voicemail works for me as well but the volume is way too low to hear
knives of ice said:
not sure what is wrong...but after upgrading to the new gps rom i don't have any sound output when using headphones or and aux cable in the car. any ideas what could be wrong? perhaps there are some audio drivers or something missing in this new rom?
any ideas? thanks.
Click to expand...
Click to collapse
are you talking about dcd's custom 2.0 rom?
My problem is with the stock 3.16 ROM, installed with customizations.
MIK1200 said:
My problem is with the stock 3.16 ROM, installed with customizations.
Click to expand...
Click to collapse
I had a problem about 2 days into the new stock rom... audio manager wouldnt play, would only scroll through song files non-stop, windows media player wouldnt load, then my ringer stopped working.
I hard reset and re-loaded my programs 1-by-1 to make sure no probs with audio. Been working fine for 2 days now.
This is a bit of reading, but I'm trying to be as complete with the info as possible. I am running the leaked 3.16 rom with customizations on my Sprint 6800, but no other apps installed (yet) and no tweaks or hacks. I previously ran the 2.09 stock rom with customizations, and all audio output worked perfectly.
After messing with things for awhile, I can hear audio as follows:
A. Calls/Voicemail/WMPlayer/system sounds using the following:
1. OEM headset
2. Jabra wired headset when using the HTC usb to usb/2.5mm adapter
B. Call audio and Voicemail using a non-OEM headset and an aftermarket usb to usb+3.5mm adapter, but no WMPlayer or system sounds
I've done numerous soft resets and 3 hard resets to try to get audio output working as I had with the 2.09 rom. I'm no expert at these things, so I'll defer to those who mess with them more than I, but it appears to me that the leaked rom reconfigured the usb port output so that certain audio is no longer directed to a pin or pins that used to be live in prior rom versions. If this is not the case, why do I hear call and voicemail audio, but no music or system sounds, while using a non-HTC adapter? Please feel free to poke holes in my guess.
This may be what watson540 was getting at.
yes, i am using dcd's 2.0 rom...but that doesn't seem to matter as many on sprint not using a custom rom but any rom based off the leaked gps rom are having audio problems.
i get no audio using an adaptor to plug in a standard headphone jack, or a line out. i'm not talking about bluetooth headphones, but just a standard headphone with an adaptor. additionally, these are not the stock headphones that come with the mogul. anything plugged in with the adaptor no longer works on my sprint mogul and its extremely frustrating.
i have tried hard resetting, reloading the rom, and loading a differnt audiopara file...nothing works that i've tried.
The same issue.
Works OK with stock headphones, but not with this adapter:
http://www.semsons.com/2miusband3st.html
I'm still able to hear voice (phonecall, voicemail etc.) using adapter, but no sound from WMP, TCPMP etc.
Tested with modified audiopara.csv and with the original from the ROM.
Adapter worked OK with 2.17 ROM, but no luck with the new one.
mezozoy said:
Works OK with stock headphones, but not with this adapter:
http://www.semsons.com/2miusband3st.html
I'm still able to hear voice (phonecall, voicemail etc.) using adapter, but no sound from WMP, TCPMP etc.
Tested with modified audiopara.csv and with the original from the ROM.
Adapter worked OK with 2.17 ROM, but no luck with the new one.
Click to expand...
Click to collapse
I know if I have any more probs I am going to re-lock and downgrade to 2.17 until the official, but so far so good
knives, so you aren't able to use ActiveSync or charge the phone using the adapter?

1.6 stopped headphones

after the 1.6 update i can no longer use my headphones. i was able to use them with toggle headset widget before. anyone know how i can fix this?
anyone have a solution, i cant listen to music
Me too
I'm having this exact problem. It was odd; when i first installed 1.6 the headphones flicked on and off for all of 5 minutes and then stopped working fully. I have the standard usb to 3.5 converter that came with the phone, and it seems to work in another device.
I tried a couple of fixes that had been suggested to people having a similar problem when they had upgraded to cupcake but neither of these worked.
Halp would be appreciated
What radio version you guys have?
First thing i read on your reply was about cutting throuats and spreading cheese which totally threw me...
Anyway, am using CyanogenMod 4.1.999, and if i'm right in thinking radio and baseband are the same thing..... 62.50s.20.17H_2.22.19.261
I just updated to the latest mod 4.1.9999 and still it won't recognise the headset. It is the original one that came with my G1.
Have searched fairly extensively and can't find anything.
Any pointers or suggestions would be very useful.
theres an app called sound route switcher, its updated and i heard it works, but i dont have a credit card, wish someone would update headset toggle widget

[REQ] Headphone mode switcher

Hey everybody,
I was wondering if somebody knew of an app that could force the desire to output the sound through the 3.5mm jack or could write one (doesn't have to look fancy)
I found toggleheadset2 but that doesn't work for android 2.2, also found sound route switcher but has the same problem.
So can anybody please help, because my phone has problems recognizing my headphones (some waterdamage) and heading on a trip in two weeks and I don't want to annoy everybody on the plane with the sound of the movies i want to watch on my phone.
Thanks in advance and hope I was clear
bump
Has nobody any idea?

Yotaphone 2- Bluetooth issues with microphone

Hi and sorry if i do not found such a topic in some discussion. I tried to search but didn´t found it yet.
My problem is that i have a new Yotaphone 2 YD201 with latest update (as far as i know) 1.1.124 , which i got OTA.
And i´m not sure if this was happening also before the update, cause i didn´t tested it before with Android 4.4.
The problem:
If i set up a call or got a call and talking some times over my bluetooth headset, the colleagues asked me that i sound like under water.
Sometimes it happens within minutes, sometimes longer...
If i switch to the mobile phones microphone everything is working correct instantly.
I tried several bluetooth headsets, which are working well on other android phones.
Then I tried the soundrecorder SW which is on the device and found out, that the bluetooth sound isn´t recorded well, means it´s very dull and quiet.
If i put my voice directly to the mobiles microphone (although bluetooth headset is still connected), the recorded sound is louder but still far away from a good quality.
But it doesn´t change, if the bluetooth headset is switched off and the soundrecorder is used directly without bluetooth headset. Still very dull and quiet.
Can anybody please test this with his Yotaphone 2 YD201 to check if only my phone has a problem, although i do not believe that it is a HW topic.
Is there some known issue or bug regarding this topic and has somebody any idea how to overcome this problem, cause without using a bluetooth headset, the phone is unaúsable at all for me.
Thx and nice evening
Cheers
neo
Meanwhile i contacted the Yotaphone Support and there was a very fast answer.
Problem is known by Developers. They are working on a fix and keep me updated.
So, lets see if and what will ever happen...
Same Yotaphone2 Bluetooth Problem
neo920768 said:
Hi and sorry if i do not found such a topic in some discussion. I tried to search but didn´t found it yet.
My problem is that i have a new Yotaphone 2 YD201 with latest update (as far as i know) 1.1.124 , which i got OTA.
And i´m not sure if this was happening also before the update, cause i didn´t tested it before with Android 4.4.
The problem:
If i set up a call or got a call and talking some times over my bluetooth headset, the colleagues asked me that i sound like under water.
Sometimes it happens within minutes, sometimes longer...
If i switch to the mobile phones microphone everything is working correct instantly.
I tried several bluetooth headsets, which are working well on other android phones.
Then I tried the soundrecorder SW which is on the device and found out, that the bluetooth sound isn´t recorded well, means it´s very dull and quiet.
If i put my voice directly to the mobiles microphone (although bluetooth headset is still connected), the recorded sound is louder but still far away from a good quality.
But it doesn´t change, if the bluetooth headset is switched off and the soundrecorder is used directly without bluetooth headset. Still very dull and quiet.
Can anybody please test this with his Yotaphone 2 YD201 to check if only my phone has a problem, although i do not believe that it is a HW topic.
Is there some known issue or bug regarding this topic and has somebody any idea how to overcome this problem, cause without using a bluetooth headset, the phone is unaúsable at all for me.
Thx and nice evening
Cheers
neo
Click to expand...
Click to collapse
Hi Neo,
I have the same probem with my Yotaphone 2.
I bought the new Bose QC30 Bluetooth, the sound is very bad for my contact.
I found something working : plug the headset Jack, and then test to phone by bluetooth.
if the jack is plugged when the bluetooth mode is selected (before or during the call), the microphone from the bluetooth is good.
if you unplug the jack during the call in bluetooth mode, the microphone is operating yet properly.
Why ???
same problem here
hi everyone,
is there any update on this issue? sadly cant use my headset anymore.
thx, luke
Isn't there a solution just above?!
Sent from my YD201 using Tapatalk
this does not work in my case ... but i installed the latest RU-rom with the radio folder from CN-rom and this seems to work for my phone.
thx for the good ideas ... Luke
luke99ofone said:
this does not work in my case ... but i installed the latest RU-rom with the radio folder from CN-rom and this seems to work for my phone.
thx for the good ideas ... Luke
Click to expand...
Click to collapse
Hi, thx for all the feedback- I also tried this CN Radio + the topic with the audio jack but none of them are real workarounds.
It seems that the CN -Radio brings some other issues for me, like unstable LTE connections + problems with SRVCC (switch from LTE to 3G/2G) in some handover situations. These problems were not available before.
So i installed the RU stock again and sorry to say it- sell the phone - It´s a nice phone and for people who do not need the bluetooth headset nearly the complete day- its a very good phone, with a great idea.
By the way- the support from Yota was quite good and they tried to help me as well as they confirmed the bug is known by the developer, but this help that much at the moment- so i´m back with my P9000 now...
Have fun with the mobile and appreciate the ideas of Yota devices...
Cheers
Neo
I seem to also have this issue on the EU version. Is it a matter of the antenna? I've ordered one of those cheap 3.5mm jack antennas to try out.
The odd thing is that bluetooth audio is fine with both speakers and a headset, from a variety of distances. I don't understand why the microphone is affected.
luke99ofone said:
this does not work in my case ... but i installed the latest RU-rom with the radio folder from CN-rom and this seems to work for my phone.
thx for the good ideas ... Luke
Click to expand...
Click to collapse
I would be interested in how you did that, my gf is getting upset as she can't use her bluetooth handfree set while driving... she has the yd206 model, build EU 1.1.124, i already thought of installing RU buil then ota update to 1.1.134, but i wonder if this would change anything.
Thanks.
any news?
YD206 model too
Hi, I have a YD206 model and same problem with the mic with bluetooth.
I am not sure if I had this problem with Kit Kat, but as I am using bluetooth in my car everyday for my job, I think that problem was from my recently Lollipop update.
bluetooth mic: any news?
Hello, I have the same issue with YD201. Phone calls over my car's integrated bluetooth sound fine to me but the people I speak with say I sound like I am in a pipe or underwater.
Has anyone found a fix?
Thank you!
YD201
Android version: 6.0.1
Baseband version: s01_003_4240_RU1_M05
I did a factory reset on my Android 6.0.1 and the problem seems to have gone away. I did try other radio firmwares before which was a wasted effort.
octagonalman said:
I did a factory reset on my Android 6.0.1 and the problem seems to have gone away.
Click to expand...
Click to collapse
Is it still ok?
Tippfehler said:
Is it still ok?
Click to expand...
Click to collapse
Yes. I've had no problems with Bluetooth audio since.
Sent from my YD201 using Tapatalk

Huawei P8 GRA-L09 No sound except via bluetooth

Hello,
A few months ago (June/July) I started looking into custom romes for my P8 and found this one:
http://forum.xda-developers.com/huawei-p8/development/rom-huawei-p8-stock-b370-prerootet-t3421507
I did the install and everything else correctly and since then the audio on my phone doesn't work anymore. Even with a new rom:
http://forum.xda-developers.com/huawei-p8/development/rom-huawei-p8-gratitude-tecalote-t3468118
The audio is "fine" and by that I meen I can take and place calls (no whatsapp, skype, discord or anything else) but I can't use the speaker, microphone, earpiece or headphones the rest of the time. [videos and music (all apps included) "play" but don't actually start] When I hookup a bluetooth device the audio comes through like nothing's wrong. I had to buy myself a BT headset because of this and the problem is just getting out of hand. If anyone can help I could use it.
Update: Normal wired headphones work when using the radio app.
Thank you
SoulFier said:
A few months ago (June/July) I started looking into custom romes for my P8 and found this one:
http://forum.xda-developers.com/huawei-p8/development/rom-huawei-p8-stock-b370-prerootet-t3421507
Click to expand...
Click to collapse
Did you try posting in that thread to ask the op (Blackball) what you can do about the lack of sound issue?
GaT7 said:
Did you try posting in that thread to ask the op (Blackball) what you can do about the lack of sound issue?
Click to expand...
Click to collapse
I can't. I don't have the permission to. I'm just a junior member

Categories

Resources