Is there a way to calibrate ? - Hero, G2 Touch General

Hi.
Recently I Purchase Used HTC Hero. Upgrade from Jasjam...
Still new to Android...
In the Edges of the screen, such as 'Q' letter on keyboard, Sometimes the ADDRESS Bar, sometimes it does not read my finger, I need to lay my finger for few seconds, or move my finger toward the center of the screen, then it reads my finger.
It looks like a calibration, and/or sensitivity issue...
is there a way to calibrate the screen, and sensitivity ?
or maybe the HERO has some hardware issues ?
Thanks
Oren

you can re-calibrate they keyboard from the settings, can't remember where but its probably under text input

Related

Poor touch recognition on screen corners

Am I the only one that seems to be having a major issue with this? It comes up more with the added on screen keyboard in 1.5, it seems.
The corners of the G1 screen do not respond to touch at all, and I find myself always having trouble hitting the keys on the corners of the virtual keyboard. Applications that require you to touch any corner of the screen with precision (ie tic-tac-toe) are annoying as well because it's difficult to get it to work.
Is there any fix in sight or is it a hardware limitation?
definitely a hardware limitation.
hardware limitation means: normal hardware limitation or limited due failure????
I only experience this problem with the right edge of my phone. The top, left, and bottom don't have any problems.
Touch also seems to be less sensitive when the phone is rested flat.
My phone has the sensitivity problem on the edges too (mostly on the right and top sides).
For example, it's almost impossible to drag an icon to the left screen, because it doesn't seem to reach the threshold area.
The protective screen (boxwave anti-glare) made the problem even worse, but since it's much more comfortable than the glass, I won't be taking it off.
The easiest way to test all this is to use the whiteboard application.
So, I ask the developers: Please don't place the buttons on the edges of the screen!
The worst apps in this regard I've seen so far were the Video player (don't remember its exact name, its seek slider was unusable), and the sudoku with the number chooser in the bottom. OpenHome's app slider has the same problem.

screen not responding to stylus pen

I've got my HTC magic last week and order a stylus pen to use with it. The problem is that the phone only respond to finger tap, and I must be holding it. If it is, for example, on the car support and I tap it with my finger it does not respond to touch. Does anyone else have this problem?
Thank you!
The HTC Magic has a captive touch screen, these types of touchscreens only work to the touch of the finger and hence will not work with a stylus.
I also have this problem, not that with the stylus ( I know it can´t be used with stylus). When laying the phone on a tabele an using with only my fingers the respons is very bad. When holding the phone in my hand it´s perfect.
Anyone knows why???
Instead of tapping the screen try a light press, it does not respond to a tap or quick jab with the finger. Go Here and you can read how the Capacitive Touchscreen works.
Clinton
Best thing that i've found to do, is make a circuit with the phone:
When its flat or in car holder if you make your thumb touch the bottom of the phone (near the roller ball) then use your finger to do the action required this seems to work!
Don't know why, but it does!
If anyone noticed, if you hold your Magic in one hand and use the other hand to point etc, the sensitivity sort of goes down.
Using the fingers (or rather thumb) of the same hand in which you hold your Magic would produce an insanely much better result!
atan.ismail said:
If anyone noticed, if you hold your Magic in one hand and use the other hand to point etc, the sensitivity sort of goes down.
Using the fingers (or rather thumb) of the same hand in which you hold your Magic would produce an insanely much better result!
Click to expand...
Click to collapse
That's due to the orientation of your fingers. Again, it's due to the capacitive screen. Using your thumb on the same hand that's holding the phone, you have more surface area touching on the screen where as if you "point" with the finger (I'm presuming your index) with the empty hand, the surface area is less. You can do a simple test. Press the screen like you were pointing at it then do the same but this time, press it like you were giving your finger print but not as wide.

Touch screen / KB doesn't work properly when Hero horizontal.

Hi Guys,
Has anyone else noticed this problem? and / or Could you please test this too to see if it's a common issue?
I use the "phone keypad" style, to enter text as I find i'm the most efficient with that one. However when the phone is horizontal, on a table for example, the backspace key just does not respond. (Which is on the right hand side of the screen near the edge)
As soon as I pick it up, so the phone is at a 45 degree angle for example, the backspace "key" responds again.
In summary I have noticed the left and right areas of the screen do not appear to be very responsive / don't work when the phone is horizontal. The middle "keys" / area is fine.
Any ideas / anyone else?
Had it for a few weeks now, not dropped it or anything, and everything else seems great. What's the deal with replacements from Orange if necessary, do they have to "repair" it? (EEK!)
Cheers, Si
I think you are experiencing this http://forum.xda-developers.com/showthread.php?p=4340678#post4340678
It seems to be more about whether your fingers are touching the bezel!
BuboBriff said:
As soon as I pick it up, so the phone is at a 45 degree angle for example, the backspace "key" responds again.
Click to expand...
Click to collapse
Rather than pick up the phone, just hold it using the thumb and forefinger and see if it works correctly. It seems to me that the touchscreen definitely works better so long as you're physically touching the device elsewhere than just using the screen. I do wonder if this is an artifact of the capacitive touch screen - I'd be interested to know if iPhones show the same behaviour.
Regards,
Dave

No touch recognition on left side of display

Hi guys,
I just noticed that the left side of my leo seems not to recognize when I touch it. With left side I mean 3-4 mm are on the whole left edge of the display where if I click nothing seems to happen. You can test it easily in calendar or in Finger keyboard in horizontal mode (90 degrees rotated display).
Anyone else has this problem?
Could it be that it's not calibrated properly ?
I think you don't have to calibrate this kind of display.
Did you try this? =
Originally Posted by spvc500
If you find that it's really difficult to type using the hd2 - I advise you Align the screen.
The device doesn't make you do this when you first boot it but I found it solved my problem.
go to....
settings >> menu >> all settings >> system >> screen
I advise you not to use a stylus to do this but your finger - may be a bit tricky but if you can touch the crosses accurately enough with your finger you will find this benefits you when using everything.
I also turned on ClearType as I always had that on and default is off.
hope it's not been mentioned already.
Calibration didn't help that specific problem.
Now I was checking and there seem to be 3-4mm border all around the display which doesn't recognize touches. Do you guys have that too?
Yup. Notice it on text messages, so say you type 4 lines and you notice a mistake at the end of line 1; trying to touch the end of the word, at the end of the line can be tricky as it is on the 'border region' so to speak.
Thanks for confirming, I started to worry that I may have a defective unit.
It would be great if more people could confirm this too.

Anyone have trouble with Tapping on the Textbox to bring up the Keyboard?

Whenever I try to start/respond to a sms, it takes about 10 tries of me tapping on the textbox at the bottom of the screen for it to recognize I'm tapping it and to make the keyboard come up.
My buddy, who will use my phone, can do it almost every time though... I'm coming from an iPhone so I'm used to touchscreens. I've tried with/without my nail, using my entire THUMB, using just the tip of my thumb.
I dunno what to do... Any ideas? Thanks
I noticed that this will happen to me on occasion. In my experience with it, if I tap towards the top of the box it will work the first time, but if I tap towards the lower bottom then it doesn't work so often.
actually, this used to happen to me alot.
then I noticed that every time i was trying to touch the text box, my thumb, or another finger from my other hand, was also touching the screen.
And since the stock keyboard doesn't have a detected multi-touch input, when there are two touched, the input value is returned as null.
So, once i figured that out, i never had a problem. But, there has also been complaints about the touch screen calibration being off, so...you can never know unless you mess around
Ill give those tips a shot! Maybe adding the multi touch hack will help too...
It also helps if you don't just tap really quick, but press it instead(well not really press, but leave your thumb or finger on it for a second).
I'm sure there are weird calibration issues near the bottoms of our screens. When I first got the phone, I really thought it was broken or there was a huge bug trying to get the virtual keyboard to come up while writing SMSes. Like david said, try touching a little higher than where the text box is to bring up the VK. Usually, I aim at the top border of the box. Now I rarely have to touch more than once to bring it up, but it's still an issue that should be addressed by HTC (or maybe Google).
heroskyy said:
actually, this used to happen to me alot.
then I noticed that every time i was trying to touch the text box, my thumb, or another finger from my other hand, was also touching the screen.
And since the stock keyboard doesn't have a detected multi-touch input, when there are two touched, the input value is returned as null.
Click to expand...
Click to collapse
This is exactly what I determined. My keyboard pops up every time when press near the top of the input box.
Is this a hardware issue - or something a future update is able to correct?
You can long-press the "Menu" softkey to open the keyboard at (almost) any time.
When this happens to me i just push in the trackball and the keyboard pops up.
tiltman71 said:
When this happens to me i just push in the trackball and the keyboard pops up.
Click to expand...
Click to collapse
x2
I also noticed if you get a lot of texts or have a lot of texts the problem gets worse.

Categories

Resources