Related
I have made a program for my girlfriend wizard so she can talk with skype using the earpiece instead of the loudspeaker...
It might be useful for others too, use it at your own risk, I do not take responsibilities for any damage made by this program...
It also may work with other phones, it is a matter of trying... of course again, at your own risk.
It is very simple, just run the program before a skype call and then bring it up and press "ok" to close.
If someone knows tha if skype broadcast some sort of message while making a call, please send the information to me so I can make a auto-switching program ;-)
Do not let the program running because you can really mess things around, but nothing serious... just annoying.
standalone exe file, do not sell it!!! it is free!!
Thanks.
Check the new program, at:
http://forum.xda-developers.com/showthread.php?t=469223
Thanks man, I don't need it at the moment, but it is great idea.
this is a fix that a lot of ppl have been waiting for but unfortunately it doesn't work on my tytn 2. is there any way that you can make a universal switch or one for the tytn 2?
can someone use this fix to auto-switch when wm6 voip call is comming in?
This is brilliant, brilliant!!!!
I suggest you repost this as VOIP: Audio redirection to earpierce and hopefully the mods can make this a sticky. This is a problem that has baffled many for long.
I've tested with both Express Talk and WM6 VOIP. However WM6 VOIP has got an issue on my phone where the volume is low with lots of noise. However in both cases,the app redirected the audio to the earpiece. Express talk is crystal clear through the earpiece and is what I'll be using for VOIP calls.
Would you care to elaborate on what issues we can expect if we leave the application running for long?
one small problem is after running this .exe, i am unable to key lock my device. so as i speak over the earpiece of skype i have the tendancy to press buttons (eg. hangup) with my face.
pmugabi said:
Would you care to elaborate on what issues we can expect if we leave the application running for long?
Click to expand...
Click to collapse
pmugabi:
you wont hear your phone ring at all if you leave the device running. all the sounds and notifications that come through the loudspeaker will all now come through the earpiece!
would vibrate still work?
To answer my own question, I tested it and it does! (Well I tested it on my Tilt and it worked)
My own problem now is finding a ROM that works with Skype and Troca2. The one I have now will not use the mic on the phone (whether troca2 is running or not). Either way I am making progress towards my Skype only wizard!
SKYPE and FRING on Sony Xperia X1
Have you managed to make this software automatic??
It may be a good idea if the software would work for FRING and SKYPE only without redirecting ALL the sounds.
Is it possible??
Best
Michael
I am having a issue with audio not coming out as mono on MP3 files will this work for that?
hello,
could you please make this run on WM2003 also ? i need this for my HTC magician.
thank you in advance...
MarceloFB said:
I have made a program for my girlfriend wizard so she can talk with skype using the earpiece instead of the loudspeaker...
It might be useful for others too, use it at your own risk, I do not take responsibilities for any damage made by this program...
It also may work with other phones, it is a matter of trying... of course again, at your own risk.
It is very simple, just run the program before a skype call and then bring it up and press "ok" to close.
If someone knows tha if skype broadcast some sort of message while making a call, please send the information to me so I can make a auto-switching program ;-)
Do not let the program running because you can really mess things around, but nothing serious... just annoying.
standalone exe file, do not sell it!!! it is free!!
Thanks.
Click to expand...
Click to collapse
Thanks for your great share!!!!
Does it work on X1?
I think WM2003 is too old to run
Code ... maybe?
Hi MarceloFB,
This works great on my Xperia X1 (didn't try it with Skype, just my own VOIP app). ... Also have not tried it on my TytnII, don't even think I'm going to bother, since the TytnII hardware (as far as I know) won't support it.
I would, however, love to just put the API call into my own VOIP app instead of having the extra executable.
I have tried:
waveOutMessage( hWaveOut, /*MM_WOM_FORCESPEAKER*/WM_USER + 2, FALSE, 0 );
... as I thought that was the way to redirect the sound on devices where the hardware supports it, but that does not seem to work.
Would you maybe be willing to let me know what API calls you make in your app?
Regards
Hendrik
Hi ...
.... Nevermind ... got it working .... and on TytnII as well
Perfect
Works fine with Fring, Thanks, any idea why Skype 2.5 Beta crashes on Xperia when trying to make a call?
Works on Hermes
I've been testing express talk: http://www.nch.com.au/talk/index.html and your app reroutes the audio perfectly.
Where do I send beer? I would love a today plugin.
[email protected] said:
Hi ...
.... Nevermind ... got it working .... and on TytnII as well
Click to expand...
Click to collapse
Is it possible to guide us how you changed your API to make it automatic ?
I don't know why nobody continued this thread. It is a big problem for all of WM users .
I have WM 6.1 and still the same problem . Damn Microsoft cannot fix this issue ?
Take a look at the first post, I have made a new program with automatic switch, and need people to test it and give some feedback, I intend to make corrections as bugs appears.
There is a 2 sec delay between hitting the "ANSWER" key and getting/starting to send my voice to caller.
It's annoying that i have to wait about 2 seckonds till i can say HEY.
What program can i use to remove this annoying bug
or can i just use other kind of phone software?
(i used phonex and it was faster, delay was about 0,5 sec)
By default, there's a 3 sec delay between hitting the END key and dropping the call,
that can be adjusted by advanced configuration tool. set mine to 0 sec.
h2kk said:
By default, there's a 3 sec delay between hitting the END key and dropping the call,
that can be adjusted by advanced configuration tool. set mine to 0 sec.
Click to expand...
Click to collapse
Would it be possible to put up a link to advanced config tool software that you are using?
I can't seem to find the setting on v2 and v3.0+ wont work because of some .net framework problem.
Thanks
http://julien.schapman.free.fr/touchxperience/advanced-configuration-tool.php
h2kk, do you happen to have any idea whats the "keyboard layout" which is default: custom ? Is it the onscreen or hardware keyboard?
Seems like no one cares about the MOST IMPORTANT feature: PHONE
Beleive it or not, lots of people use X1 to make and receive calls,
and if that feature is buggy, then, i'd rather have that fixed, than use touch flow from htc hd.
Or is there a thread somewhere and i just don't seem to find it?
h2kk said:
Seems like no one cares about the MOST IMPORTANT feature: PHONE
Beleive it or not, lots of people use X1 to make and receive calls,
and if that feature is buggy, then, i'd rather have that fixed, than use touch flow from htc hd.
Or is there a thread somewhere and i just don't seem to find it?
Click to expand...
Click to collapse
Have you tried searching rather than expect someone to do your work for you.
Ive just typed "call delay after answer" into the search and come up with this lot.
http://www.google.com/cse?cx=000825...nswer&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
There's a lot of discussion over this on loads of different phones, some people believe it's the processor struggling, (too many progs running etc) but I'd hope not with a device this quick,
I haven't had this happen to me yet, touch wood etc...
others seem to think it's a variety of things, you could try this.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\HTC\PHONE\PhoneExtendS etting]
"EndCallTime"=dword:00000000
http://forum.xda-developers.com/showthread.php?t=258109
Fix described in the link above was for Windows Mobile 5, but hopefully it will do the trick for you. Let me know if it works.. If so, I'll use it when my phone arrives!!
fards said:
Have you tried searching rather than expect someone to do your work for you.
Ive just typed "call delay after answer" into the search and come up with this lot.
http://www.google.com/cse?cx=000825...nswer&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
There's a lot of discussion over this on loads of different phones, some people believe it's the processor struggling, (too many progs running etc) but I'd hope not with a device this quick,
I haven't had this happen to me yet, touch wood etc...
others seem to think it's a variety of things, you could try this.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\HTC\PHONE\PhoneExtendS etting]
"EndCallTime"=dword:00000000
Click to expand...
Click to collapse
Should the "CallProgressIdleTimeout" value be predefined in the registry? Because for me it wasn't there. I created an object an set it to "0000" but it didn't help anything. I still have approximately 1,5 seconds delay after hitting the answer-button before the call gets connected.
Rahul3000 said:
http://forum.xda-developers.com/showthread.php?t=258109
Fix described in the link above was for Windows Mobile 5, but hopefully it will do the trick for you. Let me know if it works.. If so, I'll use it when my phone arrives!!
Click to expand...
Click to collapse
nah dont use that one, it's for the delay in the phone ringing, but will mess a few things up soundwise on the X1 I think.
fards
I actually searched and didn't find a solution.
Tried google again but all the results lead nowhere.
Also i have allready changed my registry (don't have the callprogressidletimeout though)
Rahul3000
This fix only makes the phone ring instantly, that's not our problem here.
I'll say it again. The reason why i started this thread is:
When i used Phonex software, then answering calls was a lot faster
I'm willing to uninstall the default dialer/phone application (still don't know how to do that)
and use phonex or any other fast piece of software. (phonex freezes my phone)
h2kk said:
fards
I actually searched and didn't find a solution.
Tried google again but all the results lead nowhere.
Also i have allready changed my registry (don't have the callprogressidletimeout though)
Rahul3000
This fix only makes the phone ring instantly, that's not our problem here.
I'll say it again. The reason why i started this thread is:
When i used Phonex software, then answering calls was a lot faster
I'm willing to uninstall the default dialer/phone application (still don't know how to do that)
and use phonex or any other fast piece of software. (phonex freezes my phone)
Click to expand...
Click to collapse
What phone skin/dialer are you using ? the stock SE one?
you can revert to the default WM one by changing this key.
hklm/security/phone/skin/enabled to 0 and reboot.
try that, if it changes things then it might be worth changing the caches as the both the manilla (tf3d) and SE dialler take up a fair bit of memory, what do you have those set at?
I'm quite interested in what's causing it, as I don't have this problem on my phone
Phonex looks quite nice,
Has anyone tried to install MS Voice Command 1.6, does it work? Any recommendations?
[email protected] said:
Has anyone tried to install MS Voice Command 1.6, does it work? Any recommendations?
Click to expand...
Click to collapse
I have installed it and it works VERY well. I was really surprised that as soon as I installed the CAB file I was able to say "Play..." then any artist or album in my music library - right out of the box. Voice recognition was incredibly accurate with no setup required (I.E. "Play - A Tribe Called Quest" consistently no probs )
HOWEVER I have actually uninstalled it recently as I was watching the task manager and noticing that the 'VoiceCommand.exe' process was consistently jumping between 1% and 12% with no action from me whatsoever. This is not much and might be tolerable for some people but for me it is an added drag!
this program has some bugs
it will delay the sip and it will mess up the ringtone
however you could change the regisitry to fix it
if you don't need it , better dont install it
X807 said:
this program has some bugs
it will delay the sip and it will mess up the ringtone
however you could change the regisitry to fix it
if you don't need it , better dont install it
Click to expand...
Click to collapse
how does one fix this problem?
MrZippo said:
how does one fix this problem?
Click to expand...
Click to collapse
for the ringtone bit i dont know hoe to fix the registry
for sip issue u can check out the wikipedia here. if you are not an advance user defintely not risk to edit your registry
I tried it, but, maybe coincidence, maybe not, I found my battery ran down quite quickly. This happened over 3 days, so i uninstalled it, and it has gone back to normal battery time.
Maybe it is something to do with what SamasQ mentions above. Maybe its just my phone.
Did the incoming calls announcement work as well?
For me it was the only thing that didn't work.
Voice dial, running programs, play music, announcing new messages and calendar events - all worked. But incoming caller names did not.
On my old HTC TyTN II all of the above worked.
So I'm wondering, was it just me or don't the incoming caller announcement work on X1?
Draqula, same here, all worked but incoming call announcements.
try going to some website (win-mo experts or something and look for bengaliath, he did some extensive post on this program. I haven't had time to look yet, but its worth a shot.)
BTW, which ROM you using, (UK international?)
fpbiii said:
Draqula, same here, all worked but incoming call announcements.
try going to some website (win-mo experts or something and look for bengaliath, he did some extensive post on this program. I haven't had time to look yet, but its worth a shot.)
BTW, which ROM you using, (UK international?)
Click to expand...
Click to collapse
R1AA017 R15A GENERIC_UK
I read the bengalih guide. It was originally posted here at xda forums and helped me a lot when setting up VoiceCommand on the HTC TyTN II.
Now it's available here: http://www.winmo-experts.com/viewtopic.php?f=11&t=2&start=0&st=0&sk=t&sd=a
Unfortunately, there was no helpful info for me there.
I found and checked the following registry key...
Incoming Announcements are the function of the voicecmd.exe and the following registry key:
HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce
"Script" = "as5p"
"Category" = "VoiceCommand1"
"Sound" = "Application Data\Volatile\TTSCallerID.wav"
... and found that on my X1 there was an extra slash in the location of the wav, but fixing it didn't help.
Let me know if you find any new info.
I have successfully ported quite a bit of drivers from x1 and blackstone to raphael.. please try the blackstone wavedev.dll (it must be cooked into rom) - on raphael this updated driver fixes voice command announce problem
Voice Command 1.6 also disconnects the bluetooth headset after you give a voice command. You have to re-establish the bluetooth connection again each time.
I've already removed the Voice Command because of this.
Other than this problem, it works very well in the X1.
The small print below the sales pitch for voice commander states "Incoming caller ID announcements will be spoken via the phone speaker on Sony Ericsson Xperia X1s with a Windows Mobile build prior to 15097.3.0.0. "
Any ideas how to find the build number?
windows mobile build
esco666 said:
The small print below the sales pitch for voice commander states "Incoming caller ID announcements will be spoken via the phone speaker on Sony Ericsson Xperia X1s with a Windows Mobile build prior to 15097.3.0.0. "
Any ideas how to find the build number?
Click to expand...
Click to collapse
For windows mobile build Go to settings/system/system info.
I/ve tried in all combination, but coice command don't work with the callar id function. I purcased it, but now refund, don't work!
voice command 1.6 works fine on my X1 too except call announcement. I have tried all the recommended patches, but when I replace the files nothing happens or i get some crashes.
Has anyone tried this allready with success?
many thanks
Boris
I have read all these posts and see that most poeple have a problem with the voice caller ID being read out....
I too installed (though a previous version) v1.5 and everything works fine except for caller ID voice read out...
Another thing i found is that it would read email subject headings from my 2nd email account but not from my first email account....might just be coincidence...
Bit concerned now that I read about the 1%-12% fluctuations when you arent even using it....hmmm
Same problem, no caller ID name readout
Same problem, the callerID is not read out.
What version are you guys running of MS Voice Command? There are multiple versions of 1.6.xxxxxx.
I am trying to use it with my BT headset. That is speaking the name into my bt headset after pressing the button on it. Does that work or do I always have to use my phone for speaking my commands?
EDIT: never mind. I got it to work. By restarting the phone (so typical of Windows)
When i installed Voice Command on my Xperia... it errored out at the end of installation, but completed regardless. It is working perfectly in every aspect except announcing incoming calls. It is great when it announces messaes and e-mails so that i know whats coming in and from who...
It did announce an incoming call once or twice... but out of the blue.
msalmank said:
It did announce an incoming call once or twice... but out of the blue.
Click to expand...
Click to collapse
Interesting. For me too, that's the only problem. Incoming announcements.
Somebody mentioned it disconnects BT HF and you have to reconnect manually - not true for my Jabra BT8040, it stays connected or automatically reconnects, anyway it works.
Especially useful when driving and getting new messages and next appointments announced by BT HF.
just a question that links indirectly to this thread:
is there a way to remap the button for voice command? somehow I wanted to invoke the voice command app via the earphones' button SE X1 has. so I don't have to grab my phone inside its pouch and unlock it and press either the 2 buttons I mapped em with.
Hi,new patchs are available :
- Hot fix for resolving a display flicker of the title bar in TouchFLO 3D 2009-01-07
- Hot fix for improving the on-screen slider feature for answering calls 2009-01-07
this one?
http://forum.xda-developers.com/showthread.php?t=468399
the slide to answer hotfix already declared not only useless but also harming. see here the solution:
http://forum.xda-developers.com/showthread.php?t=468608
even the clowns at HTC realized that the fix is doing more damage than good and they "make it disappear".
hope nobody else jumped to install this fix (if it is still there). a short search before post is highly recommended, no matter how good yr intentions are.
Those seem to be new fixes, anyone tried them yet?
I just did a filecompare on the original file I still had and the new "_HTC Touch HD_TouchHD_display flicker.exe", they are identical.
I don't have the original _HTC Touch HD_Touch HD_SlidingAnswer.exe anymore so I can't check that, did HTC actually fix the bug in it?
Theres original 1/7 published fix if someone wants to compare it to version wich is on htc support now.
If you want i can make a clean install cab with all correct fixes incl. without the unnecc. reg entries incl. uninstall.
let me know if you want this.
for now. here are all relevant files from all 3 fixes as zip
!!PLS: but as you know, the "videocall button switch to call histroy bug" is there inside and isn't fixed !
These belongs to file:"phcanhtc.dll" !!
So my tip - copy all files (exclusive "phcanhtc.dll") to your windows dir and let me know how it works and if a cab for it is neccesary.
cu camel
Didnt realise there was anything wrong with the slider in answering call anyway. Seems ok to me...
chaosxq said:
Didnt realise there was anything wrong with the slider in answering call anyway. Seems ok to me...
Click to expand...
Click to collapse
after installing the fix, you can no more make videocalls: the videocall slider in phone screen now pops up the calls history
bbonzz said:
after installing the fix, you can no more make videocalls: the videocall slider in phone screen now pops up the calls history
Click to expand...
Click to collapse
I actually like that feature never really did use the video calling feature
I can dial video phone
Yesterday, I installed the hot fix of "Hot fix for improving the on-screen slider feature for answering calls."
And I check the video call function, it's normal~
I didn't see "call history" on the left bottom. I also ask my friend to help to check it. His Blackstone is normal. We both can dail video phone.
Did I miss something or the HTC hot fix is fixed?
http://www.htc.com/europe/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
Yeap, HTC re-released a working version of the patch at the end of last week.
They have indeed fixed the hot fix. The one that's there now works fine. If you installed the old "fix" you can just install the new one on top of it - no need to uninstall
I've been trying to insyall the slider fix and it tells me I have the incorrect version. I just uninstalled the old version and installed the new fresh from the site. Any ideas?
Why in Gods name do they remove Voice Dialing? Thats like removing sms availability. Anyway to install this back?
I agree voice dialing is a core function for all "Smart" phones, look how long iPhone users had to beg to get it, but at least they have it now. The irony is that HTC has had and included voice dialing in almost all there phones for two years or more now and this wonderful phone is missing it.
I for one really need it, not want, need it and did not realize it did not come included and from reading the forums there are no good compatible software packages that reliably work (for voice dialing over bluetooth devices).
I specifically need a.) voice dialing and b.) voice dialing over bluetooth support.
HTC has let a lot of users down here, there are a half a dozen posts in this forum already concerning the lack of voice and reliable voice dialing over bluetooth. I recommend you put in a support ticket to add this functionality to the phone, they could add it via a new ROM or software update if enough people request it!
Voice dialing
I seriously doubt that enough people will request this as most people would just get it themselves, and the one of their choice.
Free Man said:
...they could add it via a new ROM or software update if enough people request it!
Click to expand...
Click to collapse
I disagree, on their flagship phone I believe they will listen to a flood of requests for this functionality. Even Apple does that much, HTC is a far more focused company and this would not be hard to support or add.
One other problem is that there are currently no products that run properly on the HD2 from 3rd parties, at least not that I have found. That includes Microsoft's Voice Commander, which is outdated for starters.
Put in a support request folks, let's get the ball rolling. I have already done so and the local rep did say he will bring it to the table during their next conference call.
PhoTonic said:
Why in Gods name do they remove Voice Dialing? Thats like removing sms availability. Anyway to install this back?
Click to expand...
Click to collapse
I think they did remove SMS http://forum.xda-developers.com/showthread.php?t=584696
Voice Dialing on HD2 works like a charm
guys - my HD2 works with Voice Dialing perfectly!
i am using the old Cyberon software
btw - i always replaced any other with this one as it is the best
the version is 1.2
it works like charm and never fails
the only problem i have is that i had to assign a shortcut to it as the keymapping is missing (HTS ?)
i mean the phone long press key assigning
in HD2 there is no available key - any one can help on this ?
ZeevG said:
guys - my HD2 works with Voice Dialing perfectly!
i am using the old Cyberon software
btw - i always replaced any other with this one as it is the best
the version is 1.2
it works like charm and never fails
Click to expand...
Click to collapse
Can you to share link for this soft which you use?
of course - please find attached.
i got it somewhere here i think long time ago so now it comes back
anyone with solution / idea as per assigning the button to long call (green) press ? or other hardware button ?
ZeevG said:
of course - please find attached.
i got it somewhere here i think long time ago so now it comes back
anyone with solution / idea as per assigning the button to long call (green) press ? or other hardware button ?
Click to expand...
Click to collapse
Thankyou.
But I have not idea how possible to assign hardware button in HD2.
I've used someone apllication for my HTC Cruise, but I don't remember how his named and not sure that is appl will be useful for WM6.5....
ZeevG said:
anyone with solution / idea as per assigning the button to long call (green) press ?
Click to expand...
Click to collapse
Yes mate - this works with most shortcuts too!
With file explorer, go to \Windows\Start Menu\Programs and copy the voice dialer shortcut. Go back a couple of levels to the \Windows folder and paste it there. Locate the shortcut (should be at the very bottom of the file list) and rename it to long_send
That shortcut gets executed when you hold the call send button, and like I said, you can do it with most shortcuts.
Works for me
HTC's response
QUOTE=PhoTonic;5094757]Why in Gods name do they remove Voice Dialing? Thats like removing sms availability. Anyway to install this back?[/QUOTE]
Yeah,
I logged a support call with them, here's their response:
"With regards to voice recognition software, microsoft havn't updated the core program for this as is only compatible with windows mobile 6.0, until this happens there is no voice recognition software."
Feaking ridiculous, How can you have a high end phone with no voicedial features. I know that users at xda will find a way around the lack of voice speed dial, however for HTC to have left it out of the official ROM is unacceptable!
thanks pals, i found another solution - a patch as a cab that enabled the long press. now only the BT activation is left out but found a version that claims to do it...
will check
Voice Speed Dialing - final all over working solution
ok - as promissed - this is a full working solution:
works with a long press call button
works with BT (!!!)
you can even backup and restore voice tags so no need to re-record if you format etc
fully tested and i am glad as this is the most critical app i use - phone and voice dialing as i spend lots of time in the car
It doesnt work for me with my bt-headset.
I cannot even record the voice with it. When I try to, the number is being called.
Thanks a lot for posting this cab. After installing it I added some voice tags but could not get the BT headset to activate the app. I then uninstalled Microsoft Voice Commander (which has never worked for me on the HD2) and did a soft reset. Voice tags had gone so recorded new ones. This app now works with my BT headset.
ZeevG said:
ok - as promissed - this is a full working solution:
works with a long press call button
works with BT (!!!)
you can even backup and restore voice tags so no need to re-record if you format etc
fully tested and i am glad as this is the most critical app i use - phone and voice dialing as i spend lots of time in the car
Click to expand...
Click to collapse
M8!! u r a life saver!!!! Kudos 2 u!!!!
all is working fine, with the HTC BH M300.
HTC!!! see.... why didn't you folks included something like this, from the getgo!?!?
ZeevG said:
ok - as promissed - this is a full working solution:
works with a long press call button
works with BT (!!!)
you can even backup and restore voice tags so no need to re-record if you format etc
fully tested and i am glad as this is the most critical app i use - phone and voice dialing as i spend lots of time in the car
Click to expand...
Click to collapse
Work like a charm Thanks a lot!
Cool, not being near my phone at the moment...I have some quick questions:
1. Does the long press to the call button have anything assigned to it by default already?
2. Can you still use voice activated dialing through a bluetooth headset without first running Cyberon or this app?
3. Do you have to install the Cyberon app to main memory or can you install it to your SD card instead to save overhead?
4. I see there are two versions of the Cyberon app, Voice Dialer and Voice Commander...It looks like you don't have to make voice tags for commander and it controls more than just calling contacts out of the box, while voice dialer simply creates a voice tag and dials that contact...Am I right? Have you guys used both of these, which do you prefer?
5. I just want to confirm, you can use a bluetooth headset and push the voice button and speak a voice tag and that will automatically activate and call that contact correct? This is what I need while in the car, not just picking up a call via a bluetooth device!
6. Zeevg...That second cab you uploaded, CVSD...What exactly is that? Is that just a newer version of Cyber that allows you to map a long key to voice dialing functionality or do I still need to install the first cab posted here, then install that one as well? It appears that this file is a better working copy to replace the original one uploaded here. If so does it automatically map the long key to the call button or do you assign it within the Cyber interface?
Thanks!
ZeevG said:
ok - as promissed - this is a full working solution:
works with a long press call button
works with BT (!!!)
you can even backup and restore voice tags so no need to re-record if you format etc
fully tested and i am glad as this is the most critical app i use - phone and voice dialing as i spend lots of time in the car
Click to expand...
Click to collapse
It works great....
Cannot thank you enough man...
Should be sticky though i am afraid this thread will not be on for long...
look for my comments within your questions
Free Man said:
Cool, not being near my phone at the moment...I have some quick questions:
1. Does the long press to the call button have anything assigned to it by default already?
ZeevG> when you get the HD2 new there is nothing there and you can't even assign a button/app to it as it is blocked.
2. Can you still use voice activated dialing through a bluetooth headset without first running Cyberon or this app?
ZeevG> no. you must install this app first to enable voice dialing / long press / BT - no worries as you did not have anything else assigned to this button before. this can also launce apps not just dialing you can assign a voice tag to launce any app installed on your device
3. Do you have to install the Cyberon app to main memory or can you install it to your SD card instead to save overhead?
ZeevG> this version allows you to select - i installed it to Storage Card. all other versions forces installation to main memory
4. I see there are two versions of the Cyberon app, Voice Dialer and Voice Commander...It looks like you don't have to make voice tags for commander and it controls more than just calling contacts out of the box, while voice dialer simply creates a voice tag and dials that contact...Am I right? Have you guys used both of these, which do you prefer?
ZeevG> these are two different apps... i use Voice Dialing...
5. I just want to confirm, you can use a bluetooth headset and push the voice button and speak a voice tag and that will automatically activate and call that contact correct? This is what I need while in the car, not just picking up a call via a bluetooth device!
ZeevG> yes mate - this is EXACTLY what i meant. i use it for all my calls. in HD2 you can even select is the voice respond from the device will go to the BT or be sound from speaker
6. Zeevg...That second cab you uploaded, CVSD...What exactly is that? Is that just a newer version of Cyber that allows you to map a long key to voice dialing functionality or do I still need to install the first cab posted here, then install that one as well? It appears that this file is a better working copy to replace the original one uploaded here. If so does it automatically map the long key to the call button or do you assign it within the Cyber interface?
ZeevG> the seconf post CVSD... is the solved app for all so no need for anything else, just throw it all away and install this one. this is NOT the latest version it is one before latest but no real diff... other than it works for all options
Thanks!
Click to expand...
Click to collapse
ZeevG> as much as may want to the credits for this solution is not mine at all other than putting it back here. as said earlier i found it long time ago here and now i am being the "public archive" and putting it back - ENJOY !!