Database Users

The Ultimate Soution for Microsoft Voice Command!!!!!!!! :) :)

Like most of you out there. I was very frustrate with the available version of Microsoft Voice Command because it doesn't seem to work properly on the Diamond. I played around with it for a few days and found a mod that allow it to work, but it doesn't seem to work for other who read my post. So these last few day I been doing hunting only. I happen to find a very new release of Microsoft Voice Command v1.6 Build 1.6.9213 that was design to work with Window mobile 6.1.
Here is the link.
http://www.ipmart-forum.com/showthread.php?t=274611
This version of Voice Command will install properly on your Diamond and save you all the trouble of Modding.
Also, for those of you who criticize me so much, I'm not doing this for money or anything, just try to help the community.
Love more, don't hate
Well, now you can all finally throw away that junk Cyperon Speech Commander and have a good night of sleep.
Also, I check Dutty ROM 1.8. He seem to have version 1.6.9965 which seem to be very new. I been trying to hunt this version down but with no luck. Hopefully Dutty will unlock his ROM someday so I can extract it for everyone.

is this the one currently enabled on Dutty's Rom v1.8?

kemathon said:
Well, well. Isn't it a lucky day for you folks out there. I finally got XDA MSVC_US_PPC 1.6.19209 (this is the latest version of Microsoft Voice Command) to work on HTC touch diamond!!!!
First of all how and where to get it (search engine...hint torrent)
Installation instruction.
1. After you got the Cab file, move it to your phone and run it from there
2. Installation is going to be complete with an error...
3. Press ok and close installation window.
4. use File Explorer to navigate to the Programfile/VoiceCommand
5. Copy the file called "voicecmd.exe" (hint: the one with the icon)
6. Navigate to MyDevice/Window/Startmenu/Program
7. Then tab and hold the sreen and paste as short cut there. Now you would be able to run MSVC 1.6 from the programs menu
8. You can now go to setting, and change the press long call button to use "voicecmd"
9. And voila, there you have it. Perfectly working MSVC
Here are the additional steps to make it work with your bluetooth headset.( also the credit in the bluetooth session belong to tommatt who make the first discovery of the solution)
- set HKLM\Software\Microsoft\Bluetooth\AudioGateWay -> SupportCLI to 1
- set HKLM\Software\OEM\VoiceCommand -> VoiceCmdEnable to 1
- Made a Softreset
Well, now you can all finally throw away that junk Cyperon Speech Commander and have a good night of sleep.
Click to expand...
Click to collapse
What is the exact error message you get under the installation??
I'm planing to modify the cab to work "out of the box" for the Diamond, but I don't have my phone here so I cant test the cab myself.

Duttys
I'm using the one on Duttys ROM and its pretty wicked
I expected it to be a bit naf but its just very good and practical too.

sdc77 said:
I'm using the one on Duttys ROM and its pretty wicked
I expected it to be a bit naf but its just very good and practical too.
Click to expand...
Click to collapse
silly question but what does it do, the voice command that is?

allsorts
It allows you to call any contact by speaking into a headset or at the phone
f ex "call david smith" and it will ask you if you want to call his landline or mobile and you can confirm.
it allows you to launch any program..
f ex "open tomtom navigator" starts tomtom ...
allows you to play music.. list appointments..etc etc and all this with no 'voice training'
This page shows you what can be done with it
http://www.microsoft.com/windowsmobile/en-us/help/more/voice-command-tutorials.mspx

How do I enable a Long press on my handfree cable? Something like Ceb commander, it will activate the program when I had a long press on the handfree set

Hi. I've downloded the voice command application. But i'm having problems assigning a button for it. When i go into <settings, buttons> there arn't any buttons there for me to assign voicecmd to. Where do i get the buttons in the list from?

ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?

sushilange said:
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
Click to expand...
Click to collapse
Same here.

excuse me~~~
where can i download the cab??

holyfox said:
excuse me~~~
where can i download the cab??
Click to expand...
Click to collapse
39$
http://www.microsoft.com/products/i...7701-4eaf-8435-1cef3ec9f7ff&type=ovr#HowToBuy

electrocat said:
39$
http://www.microsoft.com/products/i...7701-4eaf-8435-1cef3ec9f7ff&type=ovr#HowToBuy
Click to expand...
Click to collapse
I beleive VC 1.6 comes on all WM6.1 ROMs now, if not HTC has been providing them for me in their ROMs. They have always worked well even over Bluetooh except on TI OMAPI devices.
This maybe helpful though for people with WM5 and older.
Jcostanza4

Wow, that is great news!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I've got it working and it works pretty good!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Also, you are a hero with interpunction!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I mean, one exclamation mark wouldn't have done it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

The Voice Command is assigned to the "Hold" button... which is the "Hold" button anyway?
I have tried to press every button, but nothing happens...

Voice commander didn't work for me. When installation starts i get an error and installation does not create Programfile/VoiceCommand. May be my ROM is the problem?
Thanks
ROM 1.93.405.1WWE HTC Diamond

This is so crap. First I installed ms voice command and of course it wasnt good for me because names are in romanian and it only recognizez english names.
I modified something and now i cant get the original voice dialler to work with my bluetooth

My voice command works just fine with my Jawbone and Diamond CDMA

German Version
Hi.
I have installed the cab without any errors and it works fine. But it will be better for me to have a german version. It´s not so easy to pronounce the german last names in english. It would be nice, if someone could tell me, where to get a german version.
Thanks
madmax07

sushilange said:
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
Click to expand...
Click to collapse
He said this is better. Didn't say the current one doesn't work.

MS Voice Command 1.6

Has anyone tried to install MS Voice Command 1.6, does it work? Any recommendations?

[email protected] said:
Has anyone tried to install MS Voice Command 1.6, does it work? Any recommendations?
Click to expand...
Click to collapse
I have installed it and it works VERY well. I was really surprised that as soon as I installed the CAB file I was able to say "Play..." then any artist or album in my music library - right out of the box. Voice recognition was incredibly accurate with no setup required (I.E. "Play - A Tribe Called Quest" consistently no probs )
HOWEVER I have actually uninstalled it recently as I was watching the task manager and noticing that the 'VoiceCommand.exe' process was consistently jumping between 1% and 12% with no action from me whatsoever. This is not much and might be tolerable for some people but for me it is an added drag!

this program has some bugs
it will delay the sip and it will mess up the ringtone
however you could change the regisitry to fix it
if you don't need it , better dont install it

X807 said:
this program has some bugs
it will delay the sip and it will mess up the ringtone
however you could change the regisitry to fix it
if you don't need it , better dont install it
Click to expand...
Click to collapse
how does one fix this problem?

MrZippo said:
how does one fix this problem?
Click to expand...
Click to collapse
for the ringtone bit i dont know hoe to fix the registry
for sip issue u can check out the wikipedia here. if you are not an advance user defintely not risk to edit your registry

I tried it, but, maybe coincidence, maybe not, I found my battery ran down quite quickly. This happened over 3 days, so i uninstalled it, and it has gone back to normal battery time.
Maybe it is something to do with what SamasQ mentions above. Maybe its just my phone.

Did the incoming calls announcement work as well?
For me it was the only thing that didn't work.
Voice dial, running programs, play music, announcing new messages and calendar events - all worked. But incoming caller names did not.
On my old HTC TyTN II all of the above worked.
So I'm wondering, was it just me or don't the incoming caller announcement work on X1?

Draqula, same here, all worked but incoming call announcements.
try going to some website (win-mo experts or something and look for bengaliath, he did some extensive post on this program. I haven't had time to look yet, but its worth a shot.)
BTW, which ROM you using, (UK international?)

fpbiii said:
Draqula, same here, all worked but incoming call announcements.
try going to some website (win-mo experts or something and look for bengaliath, he did some extensive post on this program. I haven't had time to look yet, but its worth a shot.)
BTW, which ROM you using, (UK international?)
Click to expand...
Click to collapse
R1AA017 R15A GENERIC_UK
I read the bengalih guide. It was originally posted here at xda forums and helped me a lot when setting up VoiceCommand on the HTC TyTN II.
Now it's available here: http://www.winmo-experts.com/viewtopic.php?f=11&t=2&start=0&st=0&sk=t&sd=a
Unfortunately, there was no helpful info for me there.
I found and checked the following registry key...
Incoming Announcements are the function of the voicecmd.exe and the following registry key:
HKEY_CURRENT_USER\ControlPanel\Sounds\TTSAnnounce
"Script" = "as5p"
"Category" = "VoiceCommand1"
"Sound" = "Application Data\Volatile\TTSCallerID.wav"
... and found that on my X1 there was an extra slash in the location of the wav, but fixing it didn't help.
Let me know if you find any new info.

I have successfully ported quite a bit of drivers from x1 and blackstone to raphael.. please try the blackstone wavedev.dll (it must be cooked into rom) - on raphael this updated driver fixes voice command announce problem

Voice Command 1.6 also disconnects the bluetooth headset after you give a voice command. You have to re-establish the bluetooth connection again each time.
I've already removed the Voice Command because of this.
Other than this problem, it works very well in the X1.

The small print below the sales pitch for voice commander states "Incoming caller ID announcements will be spoken via the phone speaker on Sony Ericsson Xperia X1s with a Windows Mobile build prior to 15097.3.0.0. "
Any ideas how to find the build number?

windows mobile build
esco666 said:
The small print below the sales pitch for voice commander states "Incoming caller ID announcements will be spoken via the phone speaker on Sony Ericsson Xperia X1s with a Windows Mobile build prior to 15097.3.0.0. "
Any ideas how to find the build number?
Click to expand...
Click to collapse
For windows mobile build Go to settings/system/system info.
I/ve tried in all combination, but coice command don't work with the callar id function. I purcased it, but now refund, don't work!

voice command 1.6 works fine on my X1 too except call announcement. I have tried all the recommended patches, but when I replace the files nothing happens or i get some crashes.
Has anyone tried this allready with success?
many thanks
Boris

I have read all these posts and see that most poeple have a problem with the voice caller ID being read out....
I too installed (though a previous version) v1.5 and everything works fine except for caller ID voice read out...
Another thing i found is that it would read email subject headings from my 2nd email account but not from my first email account....might just be coincidence...
Bit concerned now that I read about the 1%-12% fluctuations when you arent even using it....hmmm

Same problem, no caller ID name readout
Same problem, the callerID is not read out.
What version are you guys running of MS Voice Command? There are multiple versions of 1.6.xxxxxx.

I am trying to use it with my BT headset. That is speaking the name into my bt headset after pressing the button on it. Does that work or do I always have to use my phone for speaking my commands?
EDIT: never mind. I got it to work. By restarting the phone (so typical of Windows)

When i installed Voice Command on my Xperia... it errored out at the end of installation, but completed regardless. It is working perfectly in every aspect except announcing incoming calls. It is great when it announces messaes and e-mails so that i know whats coming in and from who...
It did announce an incoming call once or twice... but out of the blue.

msalmank said:
It did announce an incoming call once or twice... but out of the blue.
Click to expand...
Click to collapse
Interesting. For me too, that's the only problem. Incoming announcements.
Somebody mentioned it disconnects BT HF and you have to reconnect manually - not true for my Jabra BT8040, it stays connected or automatically reconnects, anyway it works.
Especially useful when driving and getting new messages and next appointments announced by BT HF.

just a question that links indirectly to this thread:
is there a way to remap the button for voice command? somehow I wanted to invoke the voice command app via the earphones' button SE X1 has. so I don't have to grab my phone inside its pouch and unlock it and press either the 2 buttons I mapped em with.

Voice dialing through Bluetooth Headset

I searched the forum, asked in some threads and got no answer!
So, how do i voice dial using my bluetooth headset and MS Voice Commander or Voice2go software?
Thanks in advance!!!

alex_mib said:
I searched the forum, asked in some threads and got no answer!
So, how do i voice dial using my bluetooth headset and MS Voice Commander or Voice2go software?
Thanks in advance!!!
Click to expand...
Click to collapse
For MSVC, it should work out of the box. For others, I got it working under my rom since V2 by replacing some dll from HD.

Well, you pair a bluetooth headset, install MS Voice Command (I have version 1.6.19971). Then you restart, go to voice command and enable it (if not already enabled!), check what and how you want the program to behave.
You can select a hard button on the phone (left or right) to engage the program.
Then, when you press the activate/voice/answer button on your headset the voice dial turns on. There you can either DIAL a number by saying the number, or, CALL a person in your phone book by saying that name.
Have fun!

michaelthemage, you're saying that if you bind MSVC to a random HW button, the headset button on the BT headset will start MSVC?
Also, I've tried MSVC myself, although I liked the basic functionality (it's neat!), it drained my battery like crazy (4x normal discharge) and it lacks customizable functionality (e.g. creating a new voice command and linking it to an application.)

jackleung said:
For MSVC, it should work out of the box. For others, I got it working under my rom since V2 by replacing some dll from HD.
Click to expand...
Click to collapse
Can you tell me what DLLs you replaced? where can I get HD's DLLs???

Voice Dialer

It seems there is no voice dialer in the VF branded TP2.
Anywhere I can get a cab? Was so used to it in the TP & TyTn & TyTn II before it.
Thanks

me too my friend, I want to have it
ANyone can HELPPPP

hello!
I just installed the Cyberon Voice Dialer and it worked great!
If you want it, just go here:
Link removed...this is not free software

Yes it does!! Thanks!!

Wow! Thanks. It works.

Thanks Mrs D! Works awesomely well, although I wish there was a way for it to not repeat the voice tag after you have said it, but to just run the program/dial the contact straight away.

I'd like that also!
pretty annoying beeing somewhere and people listening...
anyway I assigned to Long_Send and works great!

Thanks, will download/try and feedback

It's works!
This works great. The voicedailer from the 'old' diamond touch pro.

fadimck said:
Thanks, will download/try and feedback
Click to expand...
Click to collapse
WOW, you're the man, really thanks

MS Voice Command
Guys,
I just came across this. I tried the Cyberon version, but i don't like its accuracy and i cant assign a key to activate it.
Cyberon Voice Commander v2.5.1 build 709141 - thread Mod Edit - Warez link removed
Previous versions of MSVC did not work on my TP2, but this one does. The install automatically assigns itself to the press(Hold) of my dial button and replaces the CommManager button assignment. Like its predecessors, it works flawlessly for me.
Microsoft Voice Command v1.6.19214 - thread Mod Edit - Warez link removed
Have fun

Can you make a voice call over Bth (by pushing the voice call button on the bth headset, of course ! ) with this version ?

How do you get MS Voice Command to work? I downloaded /installed the cabs, i see the Voice Command icon on my phone, but I dont understand how it all works. Can someone explain to me how to get this rolling ? Thanks.

How do you get MS Voice Command to work......?
It is working well on my TP2.
Install and probably best to soft reset.
Once in, go to All Settings, the VC icon is in the Personal tab.
Set the options and Notifications to what you want.
Then go to Buttons (same tab) and make sure it is assigned to the Send Key.
Done...!
To use, press (and hold) the Send (L/H bottom key) till it makes a sound, then speak, a contact, number, app to open etc.
Works really well, especially announcing appointments.
One problem is that it conflicts with SRS WOW HD - no matter really as this audio app doesn't seem to work on the TP2 anyway - it makes your device not wake up from sleep, buggered if i know why (wish it worked!)
Hope this helps - party on!
Jabberoo

works fine - thx for this cool reference!

I love VC!! Thanks for the direction on it!! awesome to have on this phone.
ps, sometimes the lady catches me by surprise and comes outta nowhere to tell me something. kinda scary!

Sorry but the voice dialer (cyberon) dont work with my JAWBONE II

Does anyone have Cyberon or Voice Commander working with the button on their bluetooth headset? Cyberon worked fine with my headset on my TyTn II but won't work with either programme on my TP2. Is there a registry tweak required to make this functional?
Barry

Flying Low said:
Does anyone have Cyberon or Voice Commander working with the button on their bluetooth headset? Cyberon worked fine with my headset on my TyTn II but won't work with either programme on my TP2. Is there a registry tweak required to make this functional?
Barry
Click to expand...
Click to collapse
It's a problem caused by the change in Bluetooth stack that HTC made with this phone, I've not seen a working fix yet, I suspect we'll see something once the cooked ROMs start appearing.
Gordon

isnt voice command supposed to announce the incoming caller's name? mine does not.
and i have the jawbone II as well. shame it does not work with this.

Voice dialing

Voice dialing on the LEO???
i cant find it...
did thy not put that on the phone?

No voice dialing over bluetooth?
Are we in 2001?

Yes what a pain!
Tried to get 'Tellme' - no luck there.
Also downloaded 2 Voice Command progs - didn't work or install correctly.
Anyone found an alternative?

Don't worry. This seems to be disappearing from all top spec phones. Nokia's soon to be launched top-of-the line N900 doesn't come with voice dialing either. I had that down as one of the items that would make me go for the HD2. No worries, then.

Try the cab in the 4th post down. Cyberon voice, it worked for my TD2
http://forum.xda-developers.com/showthread.php?t=509120

zen123 said:
Try the cab in the 4th post down. Cyberon voice, it worked for my TD2
http://forum.xda-developers.com/showthread.php?t=509120
Click to expand...
Click to collapse
It's working... Except the "assign button" part.

htc-hd2 said:
It's working... Except the "assign button" part.
Click to expand...
Click to collapse
Check this thread http://forum.xda-developers.com/showthread.php?t=585060

Gadgety said:
Check this thread http://forum.xda-developers.com/showthread.php?t=585060
Click to expand...
Click to collapse
Jep.. Starting it by hand is no problem, and I'm already using the "Long_Send.lnk" for an other application.
So for now. I just need to "tap" the start icon.

Activate with bluetooth headset?
Is possible to activate voice dialing over bluetooth?
Thanks.

Thanks i to got it working now
only missing the botton press long time = Voice call

Spizella said:
Is possible to activate voice dialing over bluetooth?
Thanks.
Click to expand...
Click to collapse
I've not been able to make it work, but this could be me.

Bluetooth voice dailing: solved!
See this thread: http://forum.xda-developers.com/showthread.php?t=584415 and use the send command tweak of samberg. Go to your buttons section and assign the send button to Cyberon Voice dailing. Works for me!

msvc
i have installed voice command version 1.6.19209
i got an error message on the install but everything seems to work fine except when i activate a voice call through headset (plantronics voyager pro bluetooth)
it announces through the phone not the headset also incoming calls announce through phone not headset. once the call is connected it works fine on headset. and voice command accepts voice commands on the phone after long hold on headset button. anyone get this to announce over their bluetooth headset please let us know how you did it or if there is another version out there please post a link
thanks all

So...finally got my HD2...easiest machine to set up....looks great...works great....but for Voice Command. Installed the cab, got an error message just like getwet said but otherwise indicated a correct install...but I can't get it to work. Ideas?

maybe i have a fix partial
so i just installed vc version1.6.21725(googled vc and version no. download and found it) overtop of my other version in previous post didn't work with clean install of newer version so reinstalled 1st version then installed newer version
be sure to soft reset after each install then went to settings/menu/all settings/bluetooth/settings tab with gears on it/advanced/audio/put a checkmark in "play system sounds on remote handsfree device" /soft reset and guess what it now works i receive info on my headset it still dosn't announce incoming calls but i can make a handsfree call and hear the response in my headset

hummmm where in VC do i add voice commands to a contact.
the only thing i can find is under: setttings/other/voice command and in there its just settings, not the program and its features

dameblue said:
See this thread: http://forum.xda-developers.com/showthread.php?t=584415 and use the send command tweak of samberg. Go to your buttons section and assign the send button to Cyberon Voice dailing. Works for me!
Click to expand...
Click to collapse
installed: Touch X send button commmanager.cab
now when i press call botton long time i get com manager, as the cap file is sopose to..
HOW dos that fix VOICE DAILING ??

BrownGhost said:
installed: Touch X send button commmanager.cab
now when i press call botton long time i get com manager, as the cap file is sopose to..
HOW dos that fix VOICE DAILING ??
Click to expand...
Click to collapse
Just like I said before: Assign the button to Cyberon Voicedialing by change the button in the [setting] - [more] - [personal] - [button] section. This made it work for me

dameblue said:
Just like I said before: Assign the button to Cyberon Voicedialing by change the button in the [setting] - [more] - [personal] - [button] section. This made it work for me
Click to expand...
Click to collapse
first of all this is MS Voice Dailing programe
Secound off; LEO HD" dos not have botton config under settings/more/
it dos not even have settings/more/ PERSONAL <-

BrownGhost said:
it dos not even have settings/more/ PERSONAL <-
Click to expand...
Click to collapse
Mine does.