I just got my phone 2 days ago and I've been testing my 3g speeds on the stock ROM/etc and it is very slow compared to the technical average of 600kbps. I'm getting <=100 kbps most of the time, where sometimes it will be closer to the average, but now not even. The EPST EVDO preferred mode is set to auto, the PRL version is 60666, and the *#*#4636#*#* preferred network type was CDMA Auto by default. What could be causing these slow speeds, Sprint rep told me I had excellent 3g coverage in my area.
Related
I just got 3g from a local carrier bsnl. 3g speeds are not even edge speeds around 23-30 kilobits/sec slower than dial up only when it switched to hsdpa the speeds are ~1.8mbps, anything i can do here
Not much, I think. Looks like you never get good 3G, and HSDPA is what gives the normal speeds anyway.
It shows 3g there maybe my carrier sucks but it gotta be atleast over 100kbps
Here in Minneapolis on the G2, I often lose 3G inside buildings (switches to Edge). I never had that problem on AT&T. Does the T-Mobile 1700 3G Band not penetrate buildings as well as the AT&T 3G bands?
Sent from my T-Mobile G2 using Tapatalk
Depends on your location. T-Mobile here in Pittsburgh rapes AT&T, three times over and over.
The downlink of AWS 1700 is around 2110 MHz. The downlink of CLR 850 is around 880 MHz. Lower frequencies tend to penetrate buildings better. Of course this is assuming all other factors equal (e.g. density of site deployment).
It is as jashsu says, shorter bandwidth signals penetrate buildings better.
I got a good 3 megs per sec over my friends iphone4 when I had a vibrant so I'm not sweating it speed test app for who wants to know
Sent from my T-Mobile G2 using XDA App
There are a number of factors for this.
- Phone reception
- When your local network is set to switch over to 3G
- 3G network maturity/Investments
It's not the same across different cities (networks are built out differently) or phones, HTC in general has been mediocre to acceptable depending on the device. Lock 3G if you must.
heygrl said:
There are a number of factors for this.
- Phone reception
- When your local network is set to switch over to 3G
- 3G network maturity/Investments
It's not the same across different cities (networks are built out differently) or phones, HTC in general has been mediocre to acceptable depending on the device. Lock 3G if you must.
Click to expand...
Click to collapse
How do I lock 3 G on the G2?
Damn I miss pittsburgh but anway...
In Houston ATT kills T-mobile. I have both services. Constantly having problems with signal and I'm just 2 bloccs from the tower yet no problems with ATT and the speed is incredible. Just depends on your area.
Considering HSPA+ is still only a 3g network, should phones that had 3g capability be able to take advantage of HSPA+? I mean when T-Mobile upgraded their old 3g to HSDPA/HSUPA, every phone got the boost.
And why do phones that are cable of utilizing HSPA+ need a sim card that supports HSPA+
yourlife said:
Considering HSPA+ is still only a 3g network, should phones that had 3g capability be able to take advantage of HSPA+? I mean when T-Mobile upgraded their old 3g to HSDPA/HSUPA, every phone got the boost.
And why do phones that are cable of utilizing HSPA+ need a sim card that supports HSPA+
Click to expand...
Click to collapse
I work Tmo Retail. All 3g Tmo phones can utilize the HSPA+ network. The difference with the newer MT4G and G2 is that they can handle higher speeds depending on your area.
For instance, the Samsung Vibrant can handle up to 7.2 mbps while the G2 can do 14.4. In Los Angeles, I get around 4-5 megs on HSPA+ so both phones would be about the same speeds. However, I've heard in other areas in the country, some people have reached 8-12 mbps with HSPA+. In that case, the higher speed capabilities would make a difference.
Hope that answers your question!
hukkguai said:
I work Tmo Retail. All 3g Tmo phones can utilize the HSPA+ network. The difference with the newer MT4G and G2 is that they can handle higher speeds depending on your area.
For instance, the Samsung Vibrant can handle up to 7.2 mbps while the G2 can do 14.4. In Los Angeles, I get around 4-5 megs on HSPA+ so both phones would be about the same speeds. However, I've heard in other areas in the country, some people have reached 8-12 mbps with HSPA+. In that case, the higher speed capabilities would make a difference.
Hope that answers your question!
Click to expand...
Click to collapse
So you're saying that once the average speeds for HSPA+ are say 8mbps that my phone will be capped at 7.2 mbps, but if the average speeds are currently under 7.2 that I would be completely capable of having the same speeds as a phone equipped for HSPA+?
iv owned my atrix for around a year now and iv always had a small problem but just brushed it off my shoulder asif its how the phone should be, although this may be on my carriers side of things.
Im in the uk and i get signal from T-mobile and Orange as there the same company and share satellites but iv always noticed my phone signal status is really missleading, this is how it goes
normal full bars
full bars with 3G next to them
full bars with H next to them
when on the normal full bars i can barely make a call or send a text, after a few retrys it eventually gets there but otherwise says there is no network, so why is it saying i have normal cell data?
then when im on 3G which is supposed to be a half decent data transfer rate, i can call and text perfectly fine but if i try to open a webpage or facebook/twitter, it takes a painfully long time asif to say the 3G is actually cell data or something, its that slow i give up if i see 3G on my phone that means to me that its unusable for anything other than calls and texts...
then theres H+ which is lightning fast.... calls and texts once again are perfect, and when i load a webpage or facebook its faster than my wifi at home... the problem is i rarely even get this H signal unless im around a built up area like a city centre...
what im trying to get at is that although my phone is labellingg the signal as certain things it seems to be getting mixed up?
normal bars fells like it should be "no signal"
3G feels like it should be "normal cell signal"
and H feels like it should be "3G"
im not sure if i get 4G over here in england aswell before anyone asks but my H is alot faster than the 3G on my friends iphones, my friend who also has a sony xperia S also has this same confusing problem..
iv always just wondered why they seem to be labelled wrong, or is 3G just awfully slow and cant handle todays smartphones data?
any answers and discussion would be helpfull.. thanks
Hi, can I just clarify with you which device you have?
Do you have an Atrix 4G from AT&T or do you have an Atrix from Orange/Tmobile/Simfree?
First of all, you should not get confused with the term 4G.
AT&T use the term 4G incorrectly. Their network is HSPA+, which they call 4G.
In the UK, all of the networks are now also using HSPA+.
Another point, if you have a EUROPE model Atrix (Not Atrix 4G) you have more 3G frequencies available to you i.e 900mhz (disabled on Atrix 4G).
You should also be getting the following symbols on your phone (check to see if you have disabled 2G)
G, E, 3G, H (or H+, I have the sim free, it has H instead of H+)
Let me just term everything for you simply:
GSM aka 2G, normally all calls go on this when enabled:
G = GPRS. About 32kbps
E = EDGE. In theory 236kbps but never seen this speed.
UMTS aka 3G
3G = 384kbps theoretical maximum
HSDPA/HSUPA/HSPA/HSPA+ aka 3.5/3.75G
HSDPA/HSUPA or HSPA as its also known = Max theoretical speed 14.4mbps
HSPA+ = The upgraded version of HSPA, also described by the USA as 4G. Theoretical maximum 42mbps (which uk networks are supposed to be rolling out at the moment)
http://en.wikipedia.org/wiki/List_of_device_bandwidths
tehrules said:
Hi, can I just clarify with you which device you have?
Do you have an Atrix 4G from AT&T or do you have an Atrix from Orange/Tmobile/Simfree?
First of all, you should not get confused with the term 4G.
AT&T use the term 4G incorrectly. Their network is HSPA+, which they call 4G.
In the UK, all of the networks are now also using HSPA+.
Another point, if you have a EUROPE model Atrix (Not Atrix 4G) you have more 3G frequencies available to you i.e 900mhz (disabled on Atrix 4G).
You should also be getting the following symbols on your phone (check to see if you have disabled 2G)
G, E, 3G, H (or H+, I have the sim free, it has H instead of H+)
Let me just term everything for you simply:
GSM aka 2G, normally all calls go on this when enabled:
G = GPRS. About 32kbps
E = EDGE. In theory 236kbps but never seen this speed.
UMTS aka 3G
3G = 384kbps theoretical maximum
HSDPA/HSUPA/HSPA/HSPA+ aka 3.5/3.75G
HSDPA/HSUPA or HSPA as its also known = Max theoretical speed 14.4mbps
HSPA+ = The upgraded version of HSPA, also described by the USA as 4G. Theoretical maximum 42mbps (which uk networks are supposed to be rolling out at the moment)
http://en.wikipedia.org/wiki/List_of_device_bandwidths
Click to expand...
Click to collapse
ahhh i see thanks for clearing it up! well i have an unbranded motorola atrix from england so it must not be a 4G but i do get H+ signal
would there be any reason for 3G being slow then?
3g is umts and as already stated above, that's 384kbps = 48KByte/s which is very slow for todays standards. It's like isdn speed, not even dsl...
crnkoj said:
3g is umts and as already stated above, that's 384kbps = 48KByte/s which is very slow for todays standards. It's like isdn speed, not even dsl...
Click to expand...
Click to collapse
ISDN would actually be 2x dialup aka about 112kbps so a bit slower than that. Just fyi.
i live in the dominican republic and i only get H. how do i get H+?... whenever i try to access my 4g settings gives me the error "the application settings com.android.settings"
catillito said:
i live in the dominican republic and i only get H. how do i get H+?... whenever i try to access my 4g settings gives me the error "the application settings com.android.settings"
Click to expand...
Click to collapse
Go to System Settings, About, Status and look at Mobile Network Type. HSPA:10 is the fastest the Atrix supports and is not Evolved HSPA (H+). I was thinking the same as you on this until I researched. My only wish is the we had an indication of all the different HSDPA speeds in the status bar without having to look at the mobile network type. Remember, your provider you not support HSPA:10.
Take a look at the following If you want to read up a little bit: http://forum.xda-developers.com/showthread.php?t=1912716
Sent from my MB860 using Tapatalk 2
I'm currently on x829 USA variant of the Le Max 2. I've noticed that for me switching to H+ gives way faster data speeds. I'm in USA on Metro PCS. I'm using t.mobile apns. Just thought I would let some people know, depending on your area H+ may bring faster data speeds. I've noticed this on all Roms. I guess it depends on your location and where the cell towers are located and traffic congestion. What are your thoughts?
Bottom is LTE with great upload speeds. Top is H+ with better download speeds. Basically when I switch to H+ I can stream Instagram videos no problem without loading. It totally depends on the area your in as well I know.
H+ is 3G HSPA+, it is much slower than 4G LTE.
my area the (t-mobile) LTE network speed is over 100mpbs all the time ....
allrockedout said:
I'm currently on x829 USA variant of the Le Max 2. I've noticed that for me switching to H+ gives way faster data speeds. I'm in USA on Metro PCS. I'm using t.mobile apns. Just thought I would let some people know, depending on your area H+ may bring faster data speeds. I've noticed this on all Roms. I guess it depends on your location and where the cell towers are located and traffic congestion. What are your thoughts?
Click to expand...
Click to collapse
It just mean your area LTE is bad.
cgigate said:
H+ is 3G HSPA+, it is much slower than 4G LTE.
my area the (t-mobile) LTE network speed is over 100mpbs all the time ....
Click to expand...
Click to collapse
?!?! This sounds insane! What's the trick? Do you bribe T-Mobile in your area with cookies?!
Max speed of H+ is 63 Mbps. LTE is much faster but it depends on your area coverage.