Database Users

What programs you looking for ?

Currently looking for .
Today icon to turn off screen so I can leave WIFI and MSN on with screen off.
Today icon to switch between landscape portrait.
Today bar that shows outgoing calls in minutes and sms texts sent.
Icon on today screen that lets me turn GPS on or off so it doesnt connect itself but I dont need dummy entries.
Task list that actually shows task title like " Walk dog " didnt like taskplus.
Remote software for TV, DVD etc.
What does anyone use for the above and what is everyone else looking for ?

woo.. I won't start about what I'm looking for - it's too much But I ordered (though it's on back order.. bah) the DevKit from MS, so maybe I'll make my own solutions in due time.
Anyway...
For the first two, just get one of the many utilities that allow you to launch a program from your Today Screen. I used tdLaunch right now, might move to cLaunch (same program, bit more functions), or use a different solution altogether. Then get...
http://www.pocketgear.com/software_detail.asp?id=15527
...to rotate your screen
http://www.pocketgear.com/software_detail.asp?id=14498
or
http://www.pocketgear.com/software_detail.asp?id=15943
or
http://www.pocketgear.com/software_detail.asp?id=16314 (includes a component)
...to turn your screen off. Please note that I'm using the last one, and it turns the entire screen off (not just the backlight, the LCD panel as well) - so it won't respond to taps or anything; you'll have to use the on/off button to turn the screen back on. I don't know whether the other two turn the LCD off, or only the backlight.
Then just launch the appropriate application from your today screen using the today screen launching app. Simple as that

just checked - the other two turn the entire screen off as well

You need one single SW: SPB Pocket Plus[/url]

Yet another device lock application.

I know, I know... vijay555 just released a similar application earlier today. It seems we were working on the same thing at the same time. After discussing this with him in his thread: http://forum.xda-developers.com/viewtopic.php?t=45851
I've decided to go ahead and release my own version as an alternative.
The program can (and probably should!) be mapped to a hardware button using the Buttons control panel applet. I run mine on Button 4(hold) because I never use the voice recorder. This also prevents locking the device unintentionally.
I have also added two minor features to the application that some might find useful. You can optionally put the device to sleep after it is locked (same as pressing the power button) and you can configure a program to run just before the device is locked. This is useful if you have an application that you may want to look at frequently without unlocking the device. (Contacts, Calendar, a full-screen clock application, etc).
Both of these options are set in a control panel applet System->Device Lock.
NOTE: I know some people have use memmaid to register the lock application to run on wake up. If you do this, DO NOT select the suspend device option!! This will result in not being able to wake your device up for more than a few seconds (Wake up the device, your notification tells the device to lock, the lock process suspends the device, You wake up the device, rinse, repeat)
If you do this, all is not lost, just soft reset your device and uncheck the option to suspend in the control panel.
Here's a link to the installer (Requires WM5 PocketPC edition):
http://www.mr2-power.com/downloads/DeviceLock.CAB
You will likely need to soft-reset to see the new Control Panel applet.
*NEW* The latest version does NOT require the Lock Device today item to be loaded!
Enjoy!
-Matt Armstrong

Tried it on a BA and it works but change the default from suspend when locked since the applet doesnt show till after soft-reset. Thanks.

so you're saying make the default behavior NOT to suspend. Someone in another forum also requested the ability to blank the screen rather than suspend. I'll likely add this option in the next couple of days. I can change the default registry entry now though. A new installer should be up in a couple of minutes.
-Matt

Ok, yet another new CAB file has been uploaded. This new version has the option to suspend the device OR just blank the screen. If you blank the screen your programs will continue to run (and consume more power!). To restore the screen just press the power button. I also changed the default behavior after install to JUST lock the phone (not susped or blank). Everything else is the same.
-Matt
P.S. I appreciate all of the feedback very much. Keep it coming!

Thanks for the changes armstrom, ill download and test again. Thanks

Just installed and it works ok.

I have updated the software one final time for the night.
I have eliminated the requirement that the Lock Device today item be loaded. Now you can go unload that item and free up 20 pixels of screen real-estate For some reason this was a biggie to many people :? So it's finally done.
Keep the bug reports coming as you find them.
-Matt

great version. Without the plugin makes it invaluable. Maybe you can make as an option to hook it to the power button to get it to run when you power off? Or we can use vjkey for that

Well, I can add that option. In fact an early revision of the software did have it. I was just having inconsistent results with it on my MDA. For some reason the MDA wasn't firing the wakeup event if I suspend and then resume with just the power button. (press the power to suspend, then press again to resume). If I programmatically suspend the device, then I get the event every time. I can add it back in though if you want to try it on your device. Maybe you'll have better luck?
Edit: I just installed the new version vj's software and it has the same problem as mine. For some reason my phone does fire the wake-up event properly! I'll add the option back in to my software since it seems to work on other people's hardware just fine.
-Matt

Awesome!!
Man this place is great!
Armstrom, both you and VJ are awesome. This was the biggest single thing I've missed since buying my 8125. Since I use Xpress mail and the device wakes up when a message comes in, and if it's in my holster, and a button is gettind pushed, all sorts of weird things would happen.
So I had to always remember to go to Today, scroll down, hit the lock function...grrr.
But no more. I can't believe the terrific amount of support, hard work and resources you guys all contribute to these cool little gadgets.
Thanks again to both of you.
-JMS

If this can be made wot work reliably with power on events it would be awesome.
Thank you for putting these together.

One quick question...
I would love to have the Today screen as my default app to load on a lock action, however I can't find a way to do it. There is no .lnk file to point your Device Lock to.
I tried installing PHM Keys (as there's a Today .lnk in there) but it won't install in WM5.
Any programatic way to invoke/call the Today screen from a shortcut/lnk file so I can point the Device Lock to that file so Today is always showing when I lock my phone.
Thanks again, you guys are great.
-JMS

(Apologies for multiple entries - posting problems)

(Apologies for multiple entries - posting problems)

(Apologies for multiple entries - posting problems)

Great job Matt.
One quick question for ya - I would like to keep Egress running on the today screen when the device is locked. When I choose NOT to suspend the device or blank the screen, the today screen shows but the egress app is not cycling thru the latest news (it sticks on the last before the lock).
Is there any way to keep Egress at least cycling thru the news it d/l before the lock (if not allowing it to continue to update at egress specified times)?
Thanks again!

Thank you
A very useful app!

jkimrey said:
Great job Matt.
One quick question for ya - I would like to keep Egress running on the today screen when the device is locked. When I choose NOT to suspend the device or blank the screen, the today screen shows but the egress app is not cycling thru the latest news (it sticks on the last before the lock).
Is there any way to keep Egress at least cycling thru the news it d/l before the lock (if not allowing it to continue to update at egress specified times)?
Thanks again!
Click to expand...
Click to collapse
I'm really not sure how to solve that issue. I've never use the application you're talking about. Perhaps it is detecting the device being locked and not updating itself? I'm really not sure.
-Matt

Matt,
I think it must have something to do with the phone being in locked mode. I've found that when the phone is locked, the screen will go black after a couple seconds for both the lock on the today screen as well as when using a hardware button thru your application.
When I use the today screen app, after tapping the screen when black, it will display the today screen with the cycling headlines.
When I use your lock app, however, and tap to get the screen back, it doesn't cycle. If I hold down the power button and then turn it back on after being locked by your app, however, it does cycle.
Not a huge deal, just found it interesting...Wonder what would be different between the included today screen lock and your lock app that would cause this?
Thanks again!
armstrom said:
jkimrey said:
Great job Matt.
One quick question for ya - I would like to keep Egress running on the today screen when the device is locked. When I choose NOT to suspend the device or blank the screen, the today screen shows but the egress app is not cycling thru the latest news (it sticks on the last before the lock).
Is there any way to keep Egress at least cycling thru the news it d/l before the lock (if not allowing it to continue to update at egress specified times)?
Thanks again!
Click to expand...
Click to collapse
I'm really not sure how to solve that issue. I've never use the application you're talking about. Perhaps it is detecting the device being locked and not updating itself? I'm really not sure.
-Matt
Click to expand...
Click to collapse

Ok, I have added the option to lock the device on wake-up. Note: I have not been able to test this because my device does not properly send wake-up notifications. If someone could give this a try and let me know if it works I would appreciate it.
I have also added command line options to override the configuration specified in the control panel applet. The options are as follows:
-o:* Overrides the lock options and takes a number 0-2.
0 = Lock Only
1 = Lock then Suspend
2 = Lock then Blank Screen
-r:* Overrides the application to run after locking. This must have Quotes around it. Specifying -r:"" will prevent the default application from running.
Here are some examples:
Blank the screen and run the calculator.
DeviceLock.exe -o:2 -r:"\Windows\calc.exe"
Just lock and don't run anything
DeviceLock.exe -o:0 -r:""
You do not need these command line options if you just want the device lock to always follow what you have specified in the applet. These are only to optionally override the specified behavior. Some people on another board expressed the desire to have the device lock in two different ways depending on what they were doing. This is the way
Again, please let me know if the lock on wake functionality works or not
The cab is in the usual place.
-Matt
Here are some examples:
DeviceLock.exe -o:2

T-mobile Customizations

What will I be missing If I stop the T-Mobile Customization from going through? What will I gain? I feel there are things missing or Hidden after the customization. Also, how do I do this sucessfully?

well im a newbie here but i can tell you that you gain an icon on your home screen that loks like a pda, and when you tap it your screen goes in to landscape mode, tap it again and it stays in landscape but changes orientation, tap it again and it goes back to normal. i personally like this feature alot it's very useful when you're playing a game or browsing the internet because you no longer have to slide the keyboard open. aside from that i don't think i don't really see any changes, but someone on this forum probably knows better than i. they way i did it was i pulled the battery right after you finish calibrating the screen and it asks you to tap again to continue.

You're not goin to miss much, but you'll gain alot like a boost in storage memory and a little boost in RAM. You won't have E-Mail Wizard, Oz IM, WinWap, T-Mobile Hotspot Login, and another program but you can move them to storage card and run them from there before you do the trick anyways. As for the trick itself all you have to do is a hard reset, then after you configured the screen and created (or not) a passcode, a screen comes up to Tap Screen to finish. Have you're stylus ready to soft reset at this point. Tap the screen and the default WM6 screen loads up along with a popup saying that it will finish customizing in 3 seconds. Soft reset before the 3 seconds are up and you my friend have a friendlier, healthier T-Mobile Wing. Just don't forget to feed it some healthy .cabs and if you're daring enough some registry tweaks. Enjoy!

i think the only thing i am afraid of losing is Voice Command and transcribe (yes I am the one who uses it. I never have a pen or paper handy). also really really want to try the Wing rom with touch.. wondering just how daring I really am.

Don't worry, you won't lose either of them as they're both WM6 apps. All you lose is a bunch of T-Mo junk, that's all.

papito2181 said:
Don't worry, you won't lose either of them as they're both WM6 apps. All you lose is a bunch of T-Mo junk, that's all.
Click to expand...
Click to collapse
I just hard reset last night and rebooted before the TMO customizations. One thing I noticed missing on the Today screen is an option for TMO ONS which displays Bluetooth & WiFi status. I was unable to get it added, but I assume it's either a registry change or a simple install.

Just to clear something up
If I do this trick I wont have access to the email program and IM? I have to save it onto the card?

if the wing functions like the mda, you just need total commander...run the program and change the directory to \extended_rom ...you need to type it in...and from there, just copy the cab files for the oz messenger over to your storage card. (or you can just do the whole soft reset thing and you should be able to run the cab from the extended rom).

[Utility] AutoLock - Automatic Screen Locking Solution

I have a Kaiser, and there's nothing more irritating than accidentally bumping a button while having the phone in your pocket, then having random things in your pocket scroll through your address book until it calls someone. Or opens up IE and finds a high-bandwidth website. When you don't have a data plan.
Things like this hurt. I've been trying to find a solution to it, and I happened to stumble upon an olllllld application on another forum. It's called AutoLock. I found it Here.
Anyways, long story short, it uses the built-in Windows Mobile screen lock and turns it on whenever the phone's screen turns on. So hitting the power button is enough to lock your phone. It's super convenient, and for the most part, it's not too buggy.
I've been using this for probably over a month now. It's a lifesaver. I had the .exe on my SD card, and every time I reflashed, I had to make a new shortcut and place it into the startup folder. So tonight, I made a CAB file out of it.
I hope you guys get as much use out of it as I do.
A quick note: It runs in the background. Terminating it will not allow it to function. The CAB will add a shortcut to the startup folder, so a soft reset will start it. Otherwise you can start it from the shortcut in the Programs folder.
Frequently Asked Questions:
Q: Is there a way to disable the program window that pops up after a soft-reset?
A: There is no way to disable the message screen on startup. Just hit the X in the top right corner, and it should minimize out of sight.
Q: When receiving a call, does the answer button and screen stay locked?
A: The answer button and the screen both unlock when the phone is ringing. If the call is answered/ignored/stops ringing, the screen will be re-locked.
Q: Will it work with my phone?
A: This program has been confirmed to work on a few models. I believe that it should work on pretty much any touchscreen device running Windows Mobile. Please, try it and tell me if it works!
Tested Phones:
Kaiser (ATT Tilt)
Touch Pro (Fuze)
Xperia

racer7 said:
I have a Kaiser, and there's nothing more irritating than accidentally bumping a button while having the phone in your pocket, then having random things in your pocket scroll through your address book until it calls someone. Or opens up IE and finds a high-bandwidth website. When you don't have a data plan.
Things like this hurt. I've been trying to find a solution to it, and I happened to stumble upon an olllllld application on another forum. It's called AutoLock. I found it Here.
Anyways, long story short, it uses the built-in Windows Mobile screen lock and turns it on whenever the phone's screen turns on. So hitting the power button is enough to lock your phone. It's super convenient, and for the most part, it's not too buggy.
I've been using this for probably over a month now. It's a lifesaver. I had the .exe on my SD card, and every time I reflashed, I had to make a new shortcut and place it into the startup folder. So tonight, I made a CAB file out of it.
I hope you guys get as much use out of it as I do.
A quick note: It runs in the background. Terminating it will not allow it to function. The CAB will add a shortcut to the startup folder, so a soft reset will start it. Otherwise you can start it from the shortcut in the Programs folder.
Click to expand...
Click to collapse
Nice one mate!
I assume you can also use this on a Touch Diamond??
neways, I will give it a shot....
Thanks for your work
Regards
Jeroen

thanks
racer7 said:
I have a Kaiser, and there's nothing more irritating than accidentally bumping a button while having the phone in your pocket, then having random things in your pocket scroll through your address book until it calls someone. Or opens up IE and finds a high-bandwidth website. When you don't have a data plan.
Things like this hurt. I've been trying to find a solution to it, and I happened to stumble upon an olllllld application on another forum. It's called AutoLock. I found it Here.
Anyways, long story short, it uses the built-in Windows Mobile screen lock and turns it on whenever the phone's screen turns on. So hitting the power button is enough to lock your phone. It's super convenient, and for the most part, it's not too buggy.
I've been using this for probably over a month now. It's a lifesaver. I had the .exe on my SD card, and every time I reflashed, I had to make a new shortcut and place it into the startup folder. So tonight, I made a CAB file out of it.
I hope you guys get as much use out of it as I do.
A quick note: It runs in the background. Terminating it will not allow it to function. The CAB will add a shortcut to the startup folder, so a soft reset will start it. Otherwise you can start it from the shortcut in the Programs folder.
Click to expand...
Click to collapse
this is a very usefull program.is there anyway to disable message screen when program start after softreset?thanks a lot in advance

It's unfortunate that I didn't create this program. I only found it through about six months of searching on the internet. Maybe a friendly XDA-Developer could write a similar program and keep it updated with new features!
As far as I know, there's no way to disable the message screen on startup. Just hit the X in the top right corner, and it should minimize out of sight.
As for if it works on a Diamond... go try it and tell me how it works!

Awesome program! Thanks

Looks interesting. Thx for sharing!

racer7 said:
It's unfortunate that I didn't create this program. I only found it through about six months of searching on the internet. Maybe a friendly XDA-Developer could write a similar program and keep it updated with new features!
As far as I know, there's no way to disable the message screen on startup. Just hit the X in the top right corner, and it should minimize out of sight.
As for if it works on a Diamond... go try it and tell me how it works!
Click to expand...
Click to collapse
yep i am just hitting x .it works in my xperia without problem.thanks again.

So what happens when a call comes? Does it lock the answer button too? And the screen?

kull said:
So what happens when a call comes? Does it lock the answer button too? And the screen?
Click to expand...
Click to collapse
Since it's the inbuilt Windows Mobile locking setup, when a call comes in, the phone is still locked, but the answer skin floats above the lock. So the screen "unlocks" so you can answer or reject the call, but it locks as soon as you answer or ignore it again.

I've discovered, using my Jade, that you can do the same thing by just setting the built-in Windows Mobile device lock to 0 minutes... You'd need to provide a password, though...
First press of the power button puts the phone to sleep... Press it again, it will ask for your password to unlock...

[REQ] Disable Touch Panel from shortcut

I have tried to make this myself but im not the best at c# I was hoping someone would like to write a small app that disables and enables the touch panel without using the gsensor or light sensor or nav sensor. i want to use this with a mort script so it would launch the app to disable touch panel then run the rest of the script then launch the app to enable it. i don't care if its two separate apps. if someone can help i would appreciate it so much. thanks

This isn't an actual shortcut, its a bit better than that if you ask me.
http://www.freewarepocketpc.net/ppc-download-sensorlock.html
Basically you just spin the phone in your hands and it will lock, watch the video, it shows what to do
I've also found an application called sleep, I used that for a while but now I'm on WinMo 6.5 and I just use the lock button instead. Just do a quick google for a program called sleep, shouldn't be too hard to find.
And also there is an inbuilt lock thingie where you can set your phone to lock the screen if you hold down the end call button for like 5 seconds but that one is a bit of a pain cause you gotta hold it for ages before it locks and then when you try to unlock it is hard especially if youre outside with the sun shining.

AdamHC said:
This isn't an actual shortcut, its a bit better than that if you ask me.
http://www.freewarepocketpc.net/ppc-download-sensorlock.html
Basically you just spin the phone in your hands and it will lock, watch the video, it shows what to do
I've also found an application called sleep, I used that for a while but now I'm on WinMo 6.5 and I just use the lock button instead. Just do a quick google for a program called sleep, shouldn't be too hard to find.
And also there is an inbuilt lock thingie where you can set your phone to lock the screen if you hold down the end call button for like 5 seconds but that one is a bit of a pain cause you gotta hold it for ages before it locks and then when you try to unlock it is hard especially if youre outside with the sun shining.
Click to expand...
Click to collapse
thanks for the response, i have used sensorlock and it is a great app but i want the screen lock so i can run script that involves buttons press while the phone is in my pocket

question about SIP default
i know this may not be the most appropriate thread to put this question on, my apologies. From the title I thought it may be. Anyhow, I installed phm registry editor and am trying to learn to use it, but not sure how to find something im wanting to change. My SIP default seems to be that anytime i open my sms inbox, or email, etc, my keyboard pops up without me selecting it to do so. I want to change it so it only pops up when I select the little tab/icon to MAKE it pop up.
Any help would be greatly appreciated. Much thanks in advance.