Hi to All!
I have some problem with my HTC touch,i flashed new rom on htc,after flashing the device won't to turn on it launching os but after the notice"smart mobility" it's shot down,i tried to done new flash(by pressing the power btn and camera btn) but the device doesn't recognize the USB connection.
Please give me some advice how to fix this problem.
Thanks/
vadella said:
Hi to All!
I have some problem with my HTC touch,i flashed new rom on htc,after flashing the device won't to turn on it launching os but after the notice"smart mobility" it's shot down,i tried to done new flash(by pressing the power btn and camera btn) but the device doesn't recognize the USB connection.
Please give me some advice how to fix this problem.
Thanks/
Click to expand...
Click to collapse
If you flashed your device with a rom from this section, you just successfully bricked your Elf. Flash the device back to stock by putting it in bootloader mode. This might or might not work, but it is worth a shot.
Doesn't Work anything.
Firstly thank you for your answer,but i tried to re-flash the device but it doesn't work,the flashing is complete but after the launching the OS i get "smart mobility" and animal going to sleep back
vadella said:
Firstly thank you for your answer,but i tried to re-flash the device but it doesn't work,the flashing is complete but after the launching the OS i get "smart mobility" and animal going to sleep back
Click to expand...
Click to collapse
Are you flashing back to the stock rom as I suggested?
Yes,but it doesn't work.
Can you access bootloader?
Yes,i can access to bootloader,before couple of flashing rom's i even succeed to re-flash the device,now i get some errors during the flash,like "invalid id".
vadella said:
Yes,i can access to bootloader,before couple of flashing rom's i even succeed to re-flash the device,now i get some errors during the flash,like "invalid id".
Click to expand...
Click to collapse
I think you may still have a chance to recover it since you can access b/l, but if you cannot even flash to stock... that is an issue. One to which I don't have an answer for. Head over to the Elf section. Someone might have a way to unbrick the device...
Sorry...
Anyway,thank you for your help!
I just read your solution. Glad you got your Elf working again...
You do realize that I asked you twice to flash to stock rom. Stock rom and original rom are the same thing, if you weren't sure of that I was talking about, you should have asked. I have transferred all your latest threads to the Elf forums. Please ask over there from now on as this is not the right section.
Related
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,
i used imcokemans unlocker (which i have done before) and blee0125's kitchen and really screwed up somewhere!
i cant get it past the "htc smart mobility" screen. it comes up, tells me the driver and radio versions, then those disappear like they are supposed to and...nothing else.
any suggestions would be great, plz im dying here!
i have tried hard and soft resetting and...nothing!
THANKS.
EDIT: just for those coming to this ancient and recently revived thread, this (my) problem has been solved. altho there are other people now with similar problems
Have you tried re-flashing?
jim256 said:
i used imcokemans unlocker (which i have done before) and blee0125's kitchen and really screwed up somewhere!
i cant get it past the "htc smart mobility" screen!! it comes up, tells me the driver and radio versions, then those disappear like they are supposed to and...nothing else.
can anybody help me???? PLZ im dying here!
i have tried hard and soft resetting and...nothing!
THANKS.
Click to expand...
Click to collapse
Do a camera power reset and try again.
i tried that and it didnt do anything at all. isnt that just where you hold the end key and the side camera key and stick the stylus into the hole?
if so, it have any different effect than the standard soft reset
AraqirG said:
Have you tried re-flashing?
Click to expand...
Click to collapse
and i did try...sort of. im not sure how to seeing as how i can never make it past the boot screen, and therefore cannot connect it to activesync.
THANKS.
jim256 said:
and i did try...sort of. im not sure how to seeing as how i can never make it past the boot screen, and therefore cannot connect it to activesync.
THANKS.
Click to expand...
Click to collapse
Hold down the power button and the camera button at the same time until the tri colored bootloader comes up. If that works, try flashing the stock rom for your carrier.
If that doesn't work try the same steps with the memory card removed.
If that doesn't work try to do a hard reset and see if that will take you to the bootloader.
Also, what are the numbers in on the bootloader...are you sure your device is unlocked? I believe it should say... SPL-00.40.coke... on the 2nd line if your unlocked.
You shouldn't need to connect to activesync to reboot. After you run ImCokeMan's unlocker you should be unlocked until you run it again.
As I said in the last post, all you have to do to get to the boot loader is hold down the power and camera buttons at the same time. This will put the phone into the boot loader and you should be able to flash back to the stock rom and start over.
It kind of sounds like you relocked the phone and then tried to boot a custom rom.
sorry i wasnt saying i needed to connect to activesync to reboot, i was saying i needed to connect to activesync to flash, and it wouldnt boot up so i couldnt get to activesync.
and i did to imcokemans unlocker, and everything went fine. when i was setting up the device (ie. setting password, time zone, calibration, etc...) i just decided that i didnt need to finish that as i was intending on flashing a custom rom anyway, and so any settings i put up the time to set would be erased.
having said that, i went ahead and starting flashing a custom rom right from the wm welcome screen that you get on a first boot.
thanks a LOT for your help, promptness, and attention
So are you back up and running?
well, now i am. i just took a 30 min drive down to the sprint store and got a replacement :S
thanks a lot for your help though, im scared i may really need to refer back to this thread later. but if i do, at least i know i should be able to fix it!
thanks.
well, i just did it again. i must be doing something wrong in the cooking of my ROMs...about to try out your solution..hope it works!!
wish me luck :S :S :S :S
well i was able to re-flash, but, unfortunately, it is stuck in the same "htc smart mobility" screen again. i think i have been able to narrow it down to the oemizer app. i must be doing something wrong in there.
oemizer http://forum.ppcgeeks.com/showthread.php?p=100746&referrerid=10115
ill keep cooking and trying tonight until i find what it is the problem is i guess, thx for your help guys. especially you 360discgolf.
well, after cooking and flashing too many times to remember this late, all i can do is ask for help when you guys wake up and check this thread.
in the last couple of builds i havent been doing anything with oemizer at all and it still hasnt been working, and i dont think i am doing anything extra in buildos that i havent done before in successful ROM images...it seems sort of erratic.
any suggestions/hints/comments would be great, thanks a lot.
you can't just hold the two buttons and press the reset. You have to hold the two buttons at the same time, then while holding them, use the stylus to hold the reset until it restarts. If you just tap the reset button while hold, it doesn't work.
360discgolf said:
You shouldn't need to connect to activesync to reboot. After you run ImCokeMan's unlocker you should be unlocked until you run it again.
As I said in the last post, all you have to do to get to the boot loader is hold down the power and camera buttons at the same time. This will put the phone into the boot loader and you should be able to flash back to the stock rom and start over.
It kind of sounds like you relocked the phone and then tried to boot a custom rom.
Click to expand...
Click to collapse
i'm having a similar problem. my attempt at flashing didn't go over that well and now when I turn off the device, I can't turn it on again unless I do a soft reset. I tried doing the power/camera thing but all it does is ask "are you sure, yada yada" and then the devices turns off. you were talking about a stock rom? where would I get one and how would I re-flash the rom (assuming that's the problem in the first place.).
Thanks!
vkolas said:
i'm having a similar problem. my attempt at flashing didn't go over that well and now when I turn off the device, I can't turn it on again unless I do a soft reset. I tried doing the power/camera thing but all it does is ask "are you sure, yada yada" and then the devices turns off. you were talking about a stock rom? where would I get one and how would I re-flash the rom (assuming that's the problem in the first place.).
Thanks!
Click to expand...
Click to collapse
what carrier are you?
EDIT: also:
1) what os version are you running? (build number)
2) what radio are you running?
3) what bootloader are you on? (can be accessed via holding power + camera button and poking reset hole)
4) what are the orange numbers in the very bottom right of the screen when you are booting up?
these kinds of things all need to kind of jive for the sleep function to work correctly
jim256 said:
i used imcokemans unlocker (which i have done before) ...
Click to expand...
Click to collapse
If you used the imcokemans unlocker a 2nd time, I believe you re-lock your phone.
You also mentioned that you tried to flash the ROM from the Welcome Screen. That certainly won't work. You have to be at the unlocked rainbow bootloader screen which will load when you run the RUU or when you press Power-Camera-Reset. If it doesn't go into bootloader then you've probably re-locked your phone.
denasqu said:
If you used the imcokemans unlocker a 2nd time, I believe you re-lock your phone.
You also mentioned that you tried to flash the ROM from the Welcome Screen. That certainly won't work. You have to be at the unlocked rainbow bootloader screen which will load when you run the RUU or when you press Power-Camera-Reset. If it doesn't go into bootloader then you've probably re-locked your phone.
Click to expand...
Click to collapse
haha sorry this is a problem that i had a VEERRRRY LONG time ago. have learned a lot since since then, now it is this other fella here we are trying to help him
thx tho!
all i get is the telus boot screen and thats it. is there anyway to flash the rom onto it? or restart it some how?ive tried to take out the battery and restart it that way and still boot screen.
I think you can do a hard reset by holding the "power button", "end key", and pressing the reset "pinhole" at the same time.
foxatphoenixlabs said:
all i get is the telus boot screen and thats it. is there anyway to flash the rom onto it? or restart it some how?ive tried to take out the battery and restart it that way and still boot screen.
Click to expand...
Click to collapse
have you tried getting into bootloader by pressing power/camera/reset?
when did this start happening?
The same thing happened to me today... Im frozen at the htc smart mobility boot up screen and nothing works!
if your phone was older and you tried to flash a GPS rom without installing the GPS radio then you would freeze up a the bootscreen
the remedy for that would be to install the 3.42 radio ROM
raybond25 said:
if your phone was older and you tried to flash a GPS rom without installing the GPS radio then you would freeze up a the bootscreen
the remedy for that would be to install the 3.42 radio ROM
Click to expand...
Click to collapse
I think I have same problem.
Anyone have a link where I could find that & install instructions to make sure I don't screw up more?
This happened to me too. I ended up having to reflash it like everyone said.
My htc hd2 is stuck on the boot up screen,tried pressing the end key and the red reboot button at the same time but still no progress,still stuck.....what now? help please
Hannoe said:
My htc hd2 is stuck on the boot up screen,tried pressing the end key and the red reboot button at the same time but still no progress,still stuck.....what now? help please
Click to expand...
Click to collapse
You are in the wrong section altogether. Go to this part of the site http://forum.xda-developers.com/forumdisplay.php?f=631
@OP,
First things first, did you unlock the device before flashing? Also, are you sure that you have a Vogue and not an Elf/Elfin?
A quick way to get out of your issues would be to try to flash the phone back to stock. Put the device in bootloader mode and flash a stock rom for your device.
Recently flashed to NSFfans 6.5 WM rom. I couldn't activate the phone on my account because it wouldn't take the ##...# codes.
Long story short I attempted flashing Bigstorage_SprintTouchRom.exe to try and get back to sprint software where I could use the ## codes.
Everything went smoothly until first boot when it stopped at the "HTC smart mobility" screen. I then hard reset it (send+end+reset button on bottom) and it is still locking up on that screen.
Did I just break my phone?
Thread moved to General.
No, you didn't brick it. It simply sounds like a bad flash.
Try flashing to another rom and see what happens. Which unlocker did you have on? 2.31 or .41?
BTW, if your ## codes don't work is probably because you are using a themed dialer. NFS' rom has a folder under Start Menu that is called "Phone Codes". In there, you will find the PST shortcut, which will allow you to program your phone.
if you can get into the bootloader (tri-color screen) then you haven't bricked it.
Sorry for posting in the wrong forum.
How can I get to the boot loader if the phone stays at the "HTC smart mobility" boot screen?
I tried using the rom update utility but it's not connected so it won't do anything.
---------------------------------------------
Edit: Okay, I have successfully re-flashed back to 6.5. The bootloader can be accessed by turning on the phone while pressing the camera button.
I am using 2.31 unlocker. When I try and activate the phone again what do I need to change in the phone codes to make it work?
Thanks guys.
Jacob_newton said:
Sorry for posting in the wrong forum.
How can I get to the boot loader if the phone stays at the "HTC smart mobility" boot screen?
I tried using the rom update utility but it's not connected so it won't do anything.
---------------------------------------------
Edit: Okay, I have successfully re-flashed back to 6.5. The bootloader can be accessed by turning on the phone while pressing the camera button.
I am using 2.31 unlocker. When I try and activate the phone again what do I need to change in the phone codes to make it work?
Thanks guys.
Click to expand...
Click to collapse
Under the PST programming, more than likely you will only need to change:
MSID
MIN
HOMESID
username and password (for internet)
You shouldn't need to mess with anything else afaik.
i cant make my phone go up normaly
i have the same problem and i tried to flash with others rom's with no succes ... my phone still locked in start screen . i dont know what to do.. i still can flash normally but i dont know wich rom will get back my phone again.. anyone help me plz!!
Osiii said:
i have the same problem and i tried to flash with others rom's with no succes ... my phone still locked in start screen . i dont know what to do.. i still can flash normally but i dont know wich rom will get back my phone again.. anyone help me plz!!
Click to expand...
Click to collapse
Details, details - how have you flashed? Have you tried flashing from bootloader? Flashing a carrier rom from bootloader should do the trick.
mrkite38 said:
Details, details - how have you flashed? Have you tried flashing from bootloader? Flashing a carrier rom from bootloader should do the trick.
Click to expand...
Click to collapse
Its ok already fix it... =) but i think i need to start over again from unlock to flash it with another rom!
My 1.3 focus is stuck in the Samsung logo screen. It lloks like it is in an endless reboot as the logo will go away for a moment then reappear.
I am able to get the phone into Download and Format mode with out issue.
I have also been able to succesfully reflash the original firmware without issue, but the same result none the less.
Any ideas on this?
I had put the mi7 ROM on which worked fine. This morning phone was stuck on the logo. I reflashed the mi7 without issue as well before trying the original Samsung ROM
Hi Guys
i have this same problem with my focus its also ver 1.3
i had an error on the mango update (usb cable bad apparently) according to the code, and after the failed update the phone was acting stupid and cutting out when it wants so i flashed the phone with the rogers rom, and it worked fine attempted to do the mango update again in a diff usb port and got the same error so i went to reflash the phone again so i could get my mate to try his cable the flash seemed to go through with no issues until the first reboot, then instead of getting the connect to computer screen i just got the samsung logo flashing up then restarting and flashing the samsung logo again i have tryed to flash again with diff versions of the tool and original rom and rogers rom many times but still get the same thing the only strange thing is that i cant get into the hard reset mode i can get into download mode fine but not format it just flashes back to the same flashing samsung screen Please Help or is the phone Buggered at a wild guess iv got a problem with the internal memory ??? Lost and need help
same here, please help
amitbhavi said:
same here, please help
Click to expand...
Click to collapse
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?
EnderPsp said:
Quick questions:
- did you WindowBreak
- did you install magldr/custom roms?
Click to expand...
Click to collapse
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop
reycarp said:
Hi, I have the same proble and cant get a solution, I flashed with magdlr but when it restarts stays on the samsung logo loop
Click to expand...
Click to collapse
I see. You're the 4th person I encounter having this problem after flashing magldr. You should ask in the magldr thread. I'm not sure if it's really magldr related but I don't see anything else that could cause it...
Make sure you specify there your revision(3/4)/ as well as OS version.