Related
[ROM][04/09/11] ★ XWJS8 ★ Darkyy's Extreme Cappy Edition 9.5 !!! - FINAL STABLE FROYO
FOR GINGERBREAD ROMs (DARKY's v10 and above, please check http://forum.xda-developers.com/showthread.php?t=1071931
-----------------------------------------------
Darky's ROM 9.5 Extreme Cappy Edition
>> Read the guide carefully and step-by-step! All text in BOLD and ITALICS are important! Please, read it step by step before asking questions..
Files required:
----------------------------------------
1) Base 9.2 Odin ROM
http://www.multiupload.com/TGDI86J3ZF (OPTIONAL: For Part 1 only)
This contains the BASE 9.2 ROM, ODIN and the PIT file. Be sure to use ODIN and the PIT file from this package. Unpack contents of this file to a folder.
2) Darkyy's 9.5 Extreme CAPTIVATE Edition
http://www.multiupload.com/H4RWN198MH
This is the CWM for the Darkyy's 9.5 Extreme Edition for CAPTIVATE ONLY
Please flash using PART 2!
Please refer to the next Post for the Changelogs!!
----------------------------------------------------
Pre-Installation Requirements:
1. Backup your data! Use an app like Titanium Backup, My Backup, App Saver, SMS Backup (to save SMS), etc.
2. Disable all lagfixes by going into the Recovery. Disable both normal and /system lagfixes. This is a must for installing PART 1.
Those who are on stock Samsung firmware/have never installed a custom kernel, can skip this step.
Here's a tutorial to disabling lagfix:
Boot into Recovery and then:
For Speedmod kernel, go into ‘advanced Speedmod ULK features’>’LAGFIX options’, then do the following:
1. Select ‘Disable Lagfix: Convert DATA to RFS’.
2. Select ‘Convert SYSTEM to Ext4/RFS’ and then select Yes.
3. Now select ‘Go Back’ twice, and then select ‘Reboot system now’ to reboot your phone.
4. You will then get a screen saying ‘SYSTEM Conversion requested’. Here, select the option ‘RFS: Convert to RFS’.
5. The phone will again reboot after a little while and say ‘New filesystem config detected. Convert?’ Select Yes.
6. Your lagfixes will now be disabled and your phone will reboot.
Instructions
These are divided into two parts:
-------------------------------------------------------------------
PART 1 (Flashing the base ROM 9.2):
THIS PART IS OPTIONAL ONLY IF YOU ARE BRAVE ENOUGH Those who just want to install the CWM zip using darky app can skip this part. This part is for people coming from different bases and to prevent issues when flashing from Part2.
1. Again, a reminder. Backup all your stuff before starting.
2. Wipe/Factory Reset phone. This is required. Turn off phone and then boot into Recovery (Vol UP+Vol Down+ Power Button, then release power while still holding the Vol Up + Down after 2 seconds). Select the 'wipe data/factory reset' option (using Power button if on custom ROM/custom kernel). Then select Yes to do it.
DO A MASTER CLEAR IF POSSIBLE!!
3. Now Run ODIN and connect one end of USB to the computer.
4. Turn off your phone by removing the battery and enter the Download mode by pressing the Vol Up + DOWN and inserting the other end of the USB cord. (Will bring up a screen saying 'Downloading'.) ODIN in computer will say 'Added'.
5. Tick the 'Repartition' option, and then select the following files in ODIN (from the folder you extracted the base package in):
PDA: darky_odin.tar.md5
PIT: s1_odin_20100512.pit
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
6. Press the Start button and wait for it to finish. Once it finishes, ODIN will look like this.
Disconnect the phone from the computer after phone reboots.
7. After ODIN completes procedure and the phone reboots, a screen will come on the phone with 'Android system recovery <2e>' written at the top, and the following text will be written at the bottom:
"E:Invalid command argument
--Install from package--
Finding update package...
Opening update package...
Installing update...
#MANUAL MODE#
-- Appling Muti CSC...
Installing Muti CSC"
Don't panic. Remove battery, Reinsert and Power up!!! And then click reboot.
Congratulations, you have the base Darky's ROM 9.2 installed now.
Now for the next PART.
-------------------------------------------------------------------
PART 2 (Flashing DARKYY's 9.5 CWM zip)
1. Copy the CWM zip to your internal sd-card.
2. Flash a Captivate Kernel and Modem using the links provided at the end. Plz post if you need help in this step. (Optional)
3. Open the Market, and search for 'darky' and download the DarkyROM Configurator App and install it.
4. After it is installed, open Darky ROM from the App Menu. Select all the options that you want to install, and deselect the ones you don't want.
SELECT WIPE!!!. This does not wipe your internal SD.
Use Skip Modem and Skip Kernel to use existing modem and kernel. For any other option selected, JQ1 Modem and Speedmod K13D Kernel will be installed.
Do not choose Lockscreen Wallpaper as this may lead to battery drain.
5. After selecting and deselecting the options according to your needs, Press Menu -> Select Zip and FlashReboot.
6. Select Darkys_v9.5_Cappy.zip from your internal sdcard (wherever you have saved it)!!
7. Once the phone boots, you will have everything that you selected in the DarkyROM Configurator. The initial boot time will take some time. This is completely normal (it will show the boot animation). Plz wait for it to complete.
8. That's it. The procedure is complete.
Enjoy the ROM!
PS: Any help needed with installation, using this guide, or using Odin or ADB, please post in forum!
-------------------------------------------------------------------
CHANGING AT&T BOOT LOGO!!!! (INITIAL STATIC SCREEN)
This replaces the AT&T boot logo static that is displayed with a customized logo. Do this if you do Part 1. Not tested without Part 1.
Download the attachment file logo_ATNT.jpg This is what your AT&T boot logo is gonna be.. You can edit this, add your own.. But make sure that the name stays the same.
Using ADB tools from PC,
1. Put your logo_ATNT.jpg in the folder where adb.exe exists.
2. In command prompt, adb devices to make sure your phone is connected.
3. adb push logo_ATNT.jpg /mnt/.lfs
4. adb reboot
AND THAT'S IT!! You'll now have your own customized AT&T logo on your phone!!!
==================================================
Modems
----------------
For WCDMA 850 enabled modems, please refer http://forum.xda-developers.com/showthread.php?t=876391
UGJK4, TLJL3, ZNKP1 are good modems working with the captivate. please refer thread for how to change to 850 band if not available automatically
==================================================
Kernels
-----------------
Dark Core by Ficeto: http://www.darkyrom.com/community/i...ore-1-4-now-with-i897-captivate-support.2055/
Hardcore's Speedmod: http://forum.xda-developers.com/showthread.php?t=893880
Existz's Suckerpunch: http://forum.xda-developers.com/showthread.php?t=930679
==================================================
Add-ons/ Patches
----------------------------------
AM/PM Toggle in Date/Time Settings
Download [CWM zip Package] http://www.multiupload.com/LSHWCGB635
--------------------------------------------------------------------------------------------------------------------
Swype
Download [CWM zip Package] http://www.multiupload.com/WYP7ELK7UV
--------------------------------------------------------------------------------------------------------------------
Swype - JPY
This Add-on CWM is only for people who want SWYPE in other languages (including Turkish currently not in the SWYPE included in the packages above.
Download [CWM zip Package] http://www.multiupload.com/7E7KUC6XQC //Link updated 04/09/11
Please install over other fixes. This will change the Model Number to GT-I9000
----------------------------------------------------------------------------------------------------------------------------------------------------------
ARABIC PATCH - v9.3 and above (Not tested by me)
Full credits go to madmack for this Arabic Patch.
Download [CWM zip Package] http://www.multiupload.com/3WIRIBARMZ
Steps to apply the patch:
Download the patch and extract it to a folder on your computer.
Pull /system/framework/framework.jar from your phone and place it in the subfolder framework that you extracted in step 1
Double click on commands.exe. Do not close the black cmd screens that will pop up. Once the patch is done, you should get a patched framework.jar in the subfolder generated
Verify that the generated framework.jar is bigger than the original framework.jar that you pulled from your device. It should be about 1MB larger.
Place the generated framework.jar in your phone in /system/framework and reboot.
Aljazeera fonts also included in subfolder fonts. You can place these in /system/fonts and reboot
Sometimes permissions and xml data doesn’t get updated correctly resulting in corrupted data entries. If you receive a bunch of Force Closes after a reboot, you’ll need to Factory Reset.
-----------------------------------------------------------------------------
ALL CREDITS GO TO DARKYY and who ever was involved in this Project!
ROM by Darkyy, ODIN version by Ficeto, Original guide written and tested by Addicted2088
I9000 Darky ROM Thread @XDA
Please DONATE to them.
==================================================
Changelog & Credits
CHANGELOG FROM ORIGINAL v9.5
Set USB-debugging to default after flash
Ad-free
Dialer with Msg button - No Video Call button!
Cam with No Front Camera
Removed FM RADIO
Added Home Haptic Feedback
Removed msgs from call logs
Added percentage to vertical battery - if circular not selected
build.prop edited to show SGH-i897 for future darky updates
Updated scripts - No Captivate fix needed as a prerequisite
Edited Hosts file to allow games like Words with Friends
Added keytones for the dialer
Slimmed down a lil
Added Button Light on screen touch (3s timeout)
Changed Fingerprint to enable missing Market Apps.
No more browser demonic voices (using espn radio etc.)
Updated Swype version 2.29.71.20203
Updated scripts for modem/kernel. Modem set to JQ1 and Kernel to Speedmod K13D, if skip modem and skip kernel not selected.
Screen "Stay Awake" Option enabled in Applications -> Development
Modified phone.apk and related files for auto call record by antsm
Added Automatic Call recording Control App by Dark3n. Use this to modify call record options. May need to open it twice after initial boot to get the proper settings.
Modified 3rd party apps when selected using Darky app. The apps are:
- Circular Indicator (Removed, Reason: Redundant)
- Fancy Widget (Added)
- Titanium Backup (Added)
- SGS Kernel Flasher (Added)
- Screen Filter (No Change)
- SGS Info (No Change)
- SGS Tools (No Change)
- SGS Toolbox (No Change)
- BLN Control (No Change)
- Home Switcher (No Change)
- MiuiMusic (No Change)
AM/PM Toggle in Settings -> Date and Time
Added to APN List
Other minor Cappy Tweaks
Changelog v9.5
Fixed Bluetooth Connection Issues
Fixed Market Error -18 [Apps not installing]
Fixed non-installing apps outside from Market [TitaniumBackup etc.]
Fixed RAM Hack [RAM Booster] permissions & converted from MSDOS to UNIX
Fixed ascending ringtone
Fixed phone freezing and Force Close when finishing a call with record ON
Fixed Issue with earpiece not working during calls.
Fixed tiny dots in TouchWiz Launcher
Rewritten update-script
Rewritten installation and tweak scripts
Changed ringtone & sms sound to something more neutral, but still awesome
Changelog v9.4
Based on latest XWJS8
Faster UI, smoother experience.
Included my RAM Hack Script [more free RAM and less lags]
Dozens of my new build.prop scripts [faster, more stable, better]
Reworked zipalign binary and scripts [faster startup, apps use less RAM // thanks Bo$s]
Cleanued up /system [sysctl etc.]
4 completely new Ringtones / Alarm Sounds and 1 new SMS sound [I spent more hours on those than on the ROM]
Speed Improvements for internal & external SD-Card // up to 1.5x speed [faster mediascanner etc. // thanks ickyboo]
Fixed Bluetooth A2DP Connectivity [thanks ickyboo and [email protected]]
New Bootanimation by Goldieking [best he has done so far! you'll be impressed...]
New HQ 960 x 800 Wallpapers I've custom collected
Disabled increasing ringtone [like it was in v9.2]
Changed call connect / disconnect sounds [Samsung default now]
Updated update-script
Implemented FuguTweaks for more speed [Gingerbread 2.3.3 smoothness]
Changelog v9.3
Completely based on XWJS5
ROM is faster / snappier & smoother [confirmed by many people]
ROM is performing better in 3D Apps [Games etc.]
ROM consumes less battery [I know, there are always people with battery issues]
Added 2-Way Call Recording [heavy modded by antsm]
Fixed MVNO (Mobile Virtual Network Operator) Support which prevents high
Roaming costs [this is the first ROM which fixed it]
First ROM / Theme which is completely reworked on XWJS5 [took countless days...]
Added Automatic ROM Installation Procedure [Darky App]
Fixed some scripting bugs
Updated the scripts
Fixed possible /data bug
Completely rewritten framework / theme [much cleaner & less issues]
New Bootanimation by Goldieking [Green Android]
New 5 Lockscreen Modification [adding Rotary Unlock]
Made the new Rotary Unlock the default unlock screen
Modified many System Apps to have better contrast when pressing the Menu buttons
Modded lots of Samsung apps so that icons display better on dark menu background
Tweaked dialer app tabs + dialer background [better look]
New square pop-up toast notifications!
Touched up the expanded notification bar for a cleaner look
Slightly tweaked progress bars
Fixed quick contacts badge aspect ratio (no more .9.png issues)
Fixed all draw 9 patch images
Accurate Gingerbread battery indicator without the percentage
Fixed Graphical Scrolling Bug in the Contacts App
Fixed Padding of Wireless Icon in the Settings App
Modded TW Launcher menu icons
Fixed Android Lockscreen
Tweaks to Epic Lockscreen
Fixed Browser Bookmark Icon [correct size]
Tweaked a lot of Apps to match the Gingerbread Style
Tweaked Calendar Graphics
Tweaked Clock Graphics
Tweaked Calculator Graphics
Tweaked TaskManager Graphics
Tweaked Dialer Graphics
Tweaked My Files Graphics
Tweaked MediaProvider [Media Scanner] Graphics
Tweaked TouchWiz Graphics
Tweaked Video Player Graphics
Tweaked Voice Recorder Graphics
Fixed Statusbar Icons [clock, vibrate etc.]
Tweaked Extended Power Menu [no more scrolling - cleaner]
Speeded up XWJS5 Email App
Reduced Browser Size [more speed]
Possibly fixed WiFi Ad-Hoc [wpa_supplicant updated to 6.1]
Fixed many many many small bugs which you could see in the logcat [cleaner system]
Fixed Exchange Server Account >> Contacts >> Supports now: Birthday and Email Subscription
Fixed Auto-Rotation Text so it's not cropped for some languages
Fixed Contrast for the SMS Application
Fixed Contrast for the DLNA Application
Fixed SD-Card issues for other devices than the I9000
Fixed TouchWiz's shared preferences to prevent empty docks and settings getting lost
Fixed the Phone App's shared preferences to prevent cracking sound and other issues
Fixed the Market's shared preferences to prevent several issues
Fixed Microbes LiveWallpaper
Included "Wallpaper Set and Save" [set uncropped pictures without color banding]
Changed default wallpaper [brown texture]
More finetuning here and there [cleanup]
Update Google Maps to 5.x
Updated Voodoo App
Updated SpeedMod Kernel to K13C 500Hz
Updated Market to 2.3.2
Modified Nexus S Live Wallpaper is back [choose Live Wallpapers with the Darky App]
Modded GTG Launcher has been removed - Stock XWJS5 TW Launcher is back
Default Launcher is back to Gingerbread 3D Launcher
Updated all available Apps
Updated all Darky Addons to XWJS5
Updated Kernel for I9000 and I897
Removed a few unneeded Apps [Layar etc.]
Changelog v9.2
Introducing Darky's Resurrection Edition [Odin flashable package // secure base]
Fixed WiFi Connection [stable now]
Fixed WiFi Notification pop-up [remember that it only scans all 2 minutes]
Fixed Samsung Apps [XEU CSC now]
Fixed Market [Paid Apps]
Reduced the WiFi Scan Interval [now 2 Minutes]
Adjusted ROM Tweaks [build.prop]
Changed Settings to Green // by Darkyy [use the new Darky App options for the old style]
Added Ad-Hoc Driver [optional - use the new Darky App options]
Added /system/bin/bash [more flexibility & options]
Added Italian CSC [ITV]
Added Missing Samsung Apps [Social Hub + Feeds & Updates]
Updated Voodoo App [v4.1]
Updated our Scripts
Updated Kernel to SpeedMod K12T 500MHz
Kernel & Modem Info
---------------------
Kernel: SpeedMod K12T 500MHz
Modem: JL3
Click to expand...
Click to collapse
============================================================
CREDITS
Darkyy [ROM]
Ficeto [Recovery, OTA Packages & enhanced ROM Installation]
DarkMan [Darky App]
Markoid [Darky App]
arlok12 [Chinese Support]
ock [framework / theme]
vista2k7 [5 lockscreen mod]
BlockbusterF [Some graphical enhancements in Apps]
MuayThaiFighter8 [helping & testing]
addicted2088 [great new guide]
Goldieking [bootanimations]
Screenshots!!
Darky:
insaneturbo13:
B-Naughty:
Excellent work. Where can I download that version of Odin because my version looks nothing like that.
Cool cool. Glad to see another JS3 ROM for Captivate
Can we get some screen shots? I know this rom has been around, never really looked into it
Edit:nvm
Sent from my i897 :: Darky's 9.2 w/SpeedMod K12T ::
Oh wow, nice! Finally
Yeah, I kind of stopped posting about the Darky rom... Oh well. I'm working on two different things right now, one of which might cause thermonuclear war, fry your sd card, and get you fired because your alarm didn't turn on on time.
eramming said:
Excellent work. Where can I download that version of Odin because my version looks nothing like that.
Click to expand...
Click to collapse
The Odin file is in this zip!
http://www.multiupload.com/MV9KYHGRBF
ytt3r said:
Yeah, I kind of stopped posting about the Darky rom... Oh well. I'm working on two different things right now, one of which might cause thermonuclear war, fry your sd card, and get you fired because your alarm didn't turn on on time.
Click to expand...
Click to collapse
haha.. waiting for it!! Need to burn mine!
Everyone can skip the step to disable lagfix.
The partitions are recreated with PIT.
I will be trying this in the morning! Looking forward to it, will report any bugs if found.
This ROM is from April 2nd...
Great scott!
Sent from my Captivate.
MikeyMike01 said:
This ROM is from April 2nd...
Great scott!
Sent from my Captivate.
Click to expand...
Click to collapse
I guess that's European/Asian date format. DD/MM/YYYY
ytt3r said:
Yeah, I kind of stopped posting about the Darky rom... Oh well. I'm working on two different things right now, one of which might cause thermonuclear war, fry your sd card, and get you fired because your alarm didn't turn on on time.
Click to expand...
Click to collapse
sooooooooo, its still got a couple bugs to be worked out is what you are saying right? lol its ok we can wait.
//Batch 1008 phone
Some problem with first AT&T logo boot screen. They don't show and some thing like "shutdown CRT from Nexus S?!?" .
How can i fix it?
//Sr for my bad English!
noob question:
"3. Now, turn off your phone by removing the battery and enter the Download mode by pressing the Vol DOWN+Home Key+the Power Button together. (Will bring up a screen saying 'Downloading'.)"
i assume this is for the i9000.
how to enter download mode because its not working
mellovicious said:
noob question:
"3. Now, turn off your phone by removing the battery and enter the Download mode by pressing the Vol DOWN+Home Key+the Power Button together. (Will bring up a screen saying 'Downloading'.)"
i assume this is for the i9000.
how to enter download mode because its not working
Click to expand...
Click to collapse
Vol + and. Vol - while inserting usb cable
Sent from my GT-I9000 using XDA App
I just flashed this and it's working great, I love it!
Only one little detail that I'm pretty sure you know about.
When you boot, a screen with random dots pops up for a couple seconds before the bootscreen shows up.
Nothing really major, but just making sure you know about it..
Thanks for the awesome ROM!
Version 8 Final only for bootloader 1.2
1. Sleep of Death protection
2. Integrated "Interactive" as default governor and utilized as default (instead of performance)
3. Skype video working with this combo
LINK
www.tunerspotter.com/clemsyn/Clemsyn_Caulkinver8final2.zip
If you my work, Please Donate. Thanks.
----------------------------------------------------------------------
Version 7 is released...Only for bootloader 1.2
Kernel changes:
1. Max overclock is 1600 (1472 is utilized for battery profiling)
2. Cleaned up fakesmoo overclocking code
3. Reverted Chenglu's wifi drivers to default stock (help with SODs and better BT)
4. Updated kernel source using Viewsonic's 10.9.7 patch (thanks roebeet) and up to 10.9.9
ROM changes
1. Fixed adobe flashplayer using 10.3.186
2. CPU battery profiling as follows
100-90 percent 1472
90-15 percent 1000
15-1 912
This can be overwriden when installing SetCPU
3. Virtual memory tweaks and Network tweaks as per mike1986 from his HC rom (thanks mike)
4. Used lib drivers from 5274 TNT
5. It's FAST
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn_Caulkinver7.zip
LMK how it goes
--------------------------------------------------------------------------
Version 7 beta is up.. Only for bootloader 1.2
Sorry for the delay Here are the changes in the ROM
1. Added Max Browser
2. Added Virtual Memory tweaks and Network tweaks
The rest are the same
Here is the link
www.tunerspotter.com/clemsyn/Clemsyn_Caulkinver7beta.zip.
Please let me know how it goes.
TO DO : Some kernel optimizations
Please Donate
-----------------------------------------------------------
Hi, I know I'm a kernel dev but before I return this Gtab, I want to release this combo I made. It's basically a version 11 of my kernel with OC/UV settings as stated below and a few changes to Calkulin's Fast ROm. Below are the changes.
1. Adobe Flash Player 10.2 pre-installed
2. Replaced Gallery 3D
3. Added Chenglu's USB Huawei's (confirmed Huawie 1550 working by archat68)
4. Commented sprint stuff in build.prop
5. Automated voltage and OC's settings (no need for SetCpu) via init.d profile
6. Undervolted at lowest speed settings (700mv at 21600) for improved battery life when screen is off (sleep fix enabled)
7. Undervolted at highest speed settings (1175mv at 1500000)
8. Added NFS client V3 and NFS server V3 in kernel.
9. Added Synman's boot logo
10 Added Russian Language (BIG THANKS to absorbers )
11. PimpmyGtab included in /sdcard/RemovedApps folder (needs to be installed for undervolting)
12. New 1.5 Overclocking kernel for PimpMyGtab, Advanced Routing added
13. Better voltages to boot most Tegra chips (can't guarantee all chips)
14. Edited build.prop for better Market fix
The rest are basically the same...
BIG THANKS TO CALKULIN, CHENGLU, ROEBEET, ROTHNIC, MMBLASTER, PERSHOOT and ABSORBERS everyone who tested my kernel and sent me a few beer along the way
Here is the link:
VERSION 5
http://www.mediafire.com/?keqj4kxm6cd2x1z
Directions are as follows
1. Download Calkulin's Format all zip and use CWM to install it.
2. Go to Advance, and Clear Dalvik-cache
3. Then install Clem_Caulkinver5.zip
4. If you want undervolting, install PimpmyGTAB at /sdcard/RemovedApps folder
5. Do the market fix procedure to enjoy all apps
Enjoy!!!
BTW, if you like my work, Pls don't hesitate to buy me a beer Thanks.
Here is the battery profile of this combo
51-100% battery - 1.5ghz
16%-50% - 1.2 ghz
1%-15% - 912mhz
*** Please do not change Default Launcher, you might experience sleep of death in changing launcher ***
Version 6 (NEEDS 1.2 Bootloader)
Please use 1.2 bootloader
https://rapidshare.com/files/1095733302/Clemsyn_Caulkinver6.zip
CWM 3.0.2.8 for gtablet (Compatible with bootloader 1.2)
http://www.mediafire.com/?x61q8jlu2dx8i9u
If you like more work, please buy me a beer
Sweet! I'm currently running Calkulins plus your V9 kernel and was getting ready to deal with the additions you just made standard! Awesome timing! Can I just clear Cache & Dalvik and then flash (& fix permissions) or would you recommend the full blown Format All then flash?
I am using a very similar combo and it is very stable it will be nice to have it all in one zip. Many thanks.
Can anyone download the file? I can't seem to.
Nevermind, finally got it.
Will Hulu still work in this build?
Yepper HULU works GREAT!!!
I don't know if this is a bug, but I installed thumb keyboard. I go into the keyboard options and try to check the thumb keyboard but it doesn't do anything. Then I try to go into input method, but it doesn't show up there ether.
I've enjoyed your kernel work in the short time I've had my G-Tab. Does this mean you're done w/ the G-Tab kernel making game since it sounds like you'll be returning your G-Tab?
Runs great, thanks.
Any way to add wpa2 enterprise support or get the normal android settings app?
CLEMSYN DON'T RETURN YOUR G TABLET!!!
haha thanks for all your work and the great kernels you made.. We will miss you here!
acomiskey said:
Runs great, thanks.
Any way to add wpa2 enterprise support or get the normal android settings app?
Click to expand...
Click to collapse
Fixed the wpa2 enterprise issue by installing "WiFi Advanced Configuration Editor" from the market, now I'm on my work network.
sweetfish said:
I don't know if this is a bug, but I installed thumb keyboard. I go into the keyboard options and try to check the thumb keyboard but it doesn't do anything. Then I try to go into input method, but it doesn't show up there ether.
Click to expand...
Click to collapse
You have to copy the apk over to system/app folder. You'll need root explorer or something similar.
Thank you in advance for your work. I'm waiting for gTablet I just ordered yesterday from Woot. Hopefully it will show up next few weeks.
Ran this ok for half the day, then pressed power in attempt to wake from sleep and it rebooted. Now it's stuck on the honeycomb boot animation. Any ideas?
acomiskey said:
Ran this ok for half the day, then pressed power in attempt to wake from sleep and it rebooted. Now it's stuck on the honeycomb boot animation. Any ideas?
Click to expand...
Click to collapse
Try going to recovery mode and wipe cache, the clear Dalvik-cache (it's under Advance). Then fix permissions (Also under Advance) then reboot. Hope that helps.
Thanks....i ended up reflashing using the regular clockwork....i was using the .8 clockwork previously. That was wrong right?
Sent from my DROIDX using XDA App
devlop said:
You have to copy the apk over to system/app folder. You'll need root explorer or something similar.
Click to expand...
Click to collapse
I was wondering the same thing as the poster you replied to. I will get root explorer, but where would we find the thumb keyboard that I attempted to install (paid for it). Which folder? Thanks in advance.
With root explorer, go into data/apps and copy the thumb keyboard apk. Now back out and go into system/apps. Make sure you select mount R/W at the top of the screen. Now paste the apk in this folder. Reboot. Now just long press in a text box and choose thumb keyboard in the input method.
imdaman99 said:
I was wondering the same thing as the poster you replied to. I will get root explorer, but where would we find the thumb keyboard that I attempted to install (paid for it). Which folder? Thanks in advance.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=9532446&postcount=1
I found a easy way to do it! Using CWM install replace tnt settings zip. reboot! you should have your old settings menu now. Then change the keyboard. Go back to CWM and flash rollback tnt settings zip. Reboot! Now your done!
:I suggest you use rollback because some widgets and stuff dont work with the replacement zip:
clemsyn said:
3. Added Chenglu's USB Huawei's (not tested since I don't have this device)
4. Commented sprint stuff in build.prop
Click to expand...
Click to collapse
What do these two do?
[ROM][GB][JVO][6/8/2011]►Continuum v5.6◄i897/i896/i9088►Support forum is Live!◄
Update 13/6/2011: As I stated, I created a support forum for Continuum. I will continue announcing new releases and give support on xda. However, for those willing to find only Continuum related information and news, the link is below.
Continuum Community Support Forum
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
First of all, I assume NO RESPONSIBILITY to what you do to your phone! So flashing any of the files linked to in this thread is fully your own mature decision and I will not accept to be blamed for your failure in following the installation steps and understanding the information contained in this thread but mostly in the first 4 posts.
Important Note:
After flashing bootloaders the key combinations to enter recovery/download mode are as follows:
Recovery Vol UP + Power
Download Vol Down + Power or Vol Down + USB insert
It has been reported that an inverted combination (Vol Up instead of Vol Down) worked for some. Try that as well if you can't get the ones above to work
I recommend keeping RFS for best battery life.
As well, keep applications on internal memory, don't move the to the sdcard! Makes the loading slower and some things might not work as they should! You've been warned!
Any referral to Quadrand scores will be ignored!!
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Installation documentation
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Feature list
Modem I9000TDVJP9
Talon kernel
Tweaked Touchwiz 3 with landscape support.
Extended power menu
9 lockscreens. Lockscreen Wallpaper and sound can be set for all of them.
MMS/SMS removed from logs
Hacked camera: taking pictures/videos with power button and on low battery - you do not need to long press the power button to zoom, just press once and it zooms automatically before shooting.
Home haptic feedback and buttons light on touch fixed thanks to MikeMike01
Option to enable/disable GPS tagging in Camera
Phone without ascending ringtone.
Link voice call volume with notification volume option in Settings
Killed battery full notification.
Browser with user agent settings and tab limit increased to 8.
Separate tones for Volume setting (each volume intensity has a different sound when pressing the volume keys)
Removed several useless fields in Settings.
Added back keep the screen on in Development settings.
Wifi scan interval increased to 30 sec
Samsung Keyboard with 30 dictionaries for XT9
Bash shell
Simple scripts for fast mounting /system as ro and rw (just type ro or rw in the terminal emulator -requires su- or in a adb shell session)
3D rendering fixed
Tegra 2 Games capability
Perfect keyboard (replacing GB kb) thanks to for.digit
SIP configuration in Call settings
Landscape Dialer
Landscape Phone
Landscape GB Launcher with option to drop to uninstall
Sony ARC Launcher
Updated system apps.
Deodexed, rooted, zipaligned
maybe others that I forgot...
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
Note: Most of the following instructions are valid assuming that you run a Windows machine and your device does not have updated boot loaders (see Galaxy S bootloaders section).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Caution measures:
Make sure you have a full battery
Make sure you have a JIG around just in case (some info about it here and here)
Make sure your cable is in a good status and that it will not cause any interruption between phone and PC while the flash process is ongoing
Make sure KEIS is not not running, you may install it to have the necessary drivers installed
This is difficult but make sure that your computer doesn’t tend to connect and disconnect randomly from USB devices. I cannot support or cover this in any way here, find resources by yourself.
Explanation of technical terms:
ODIN: ODIN is a closed source tool application used by Samsung to “download” the operating system onto a device while the device is in “Download Mode”.
Download Mode: Is a state of the device when the internal memory is made available to a tool hosted on a PC. The tool may then write data on the internal memory.
The internal memory, in this case, refers to the system reserved blocks not the user data blocks. The user data will not be touched while using such a tool (e.g. ODIN).
The Download Mode status can be achieved by using a key combination, ABD command or a custom made USB device aka JIG.
Ways of achieving Download mode using key combinations and ADB:
ADB – from recovery or normally booted with USB debug ON
If you don’t have adb already installed and configured, download this package, extract it somewhere and navigate to that folder in command prompt and type in
adb reboot download
Key combo
Remove the battery, sim, sdcard
Insert the battery back
Hold Volume UP + Volume Down and plug in the USB cable
...Or Hold Volume UP + Volume Down and Power button
Galaxy S BootloadersThink of a boot loader as a BIOS. If you don’t have them (bad flash), the phone needs serviced.
They are 2 and their usage is as follows:
Primary bootloader – boot.bin – used to perform low lever hardware initialization. Importance – HIGH!
Secondary bootloader – sbl.bin – loads the linux kernel and passes the necessary arguments. This is as well responsible for giving you download mode and recovery by using key combo (see Gingerbread update and how to go back to “stock” safely). Phones batch 1008 and newer do not have this capability due to a hardware lock of the feature. Importance – HIGH!
THEY NEED TO BE THE SAME REVISION! You cannot have a primary boot loader from a gingerbread release in tandem with a secondary boot loader from an Éclair or Froyo release. The phone will not boot and will need to be sent to Samsung or ATT for repair. If you find such a package, please address the issue to the creator so he can fix it by including the primary boot loader from the same revision.
How to find out if the firmware that you are going to flash contains boot loaders or not:
The firmware packages that can be flashed with ODIN have .tar or .tar.md5 extension. In both cases, you can open the file with 7zip
[FONT="]L[/FONT]ook inside the file and see if there is a boot.bin and sbl.bin.
Additional information about .rfs images
These images can be opened with MagicISO (shareware)
You can simply assign the program as default for this extension and you can open them just by double clicking.
Gingerbread update and how to go back to stock safely
Gingerbread focuses on graphical performance and I assume there was a need in changing several boot instructions, hence the need of updating the boot loaders.
By updating the boot loaders you take a risk of making your device unusable. However, the files are very small so the chance of this happening is somewhere below 1% (roughly calculated by comparing the number of downloads with the number of bricks)
There are 2 presumably safe ways to go back to stock 2.1
OdinOneClick Downloader – all information necessary is in the main thread – this will erase any trace of custom ROMs installed on your phone
Stock JF6 without boot loaders – all information necessary is in the main thread – this will erase any trace of custom ROMs installed on your phone except bootloaders
Stock JF6 with bootloaders and 3 button combo fix (not available yet!) – I will be working on creating this package – it will do the same as OdinOneClick Downloader except that it will add the 3 button combo fix
Unsafe ways to go back to stock
ODIN JF6 with 3 button combo fix – this will only downgrade the secondary boot loader leaving the primary one untouched. If you ever flash ODIN packages and is mentioned that they include boot loader(s) make sure that they include them both!! BY USING THIS METHOD TO GO BACK TO STOCK FROM MY ROM OR ANY OTHER GINGERBREAD ROM THAT UPDATED BOOT LOADERS, YOU WILL BRICK YOUR DEVICE!!
You may use this method ONLY AFTER using OdinOneClick Downloader as that method will revert the primary boot loader as well.
Actual installation steps:
Download latest version of Continuum and put it on sdcard
Optional - return to stock using this method
Optional - only if you dont have latest bootloaders (you can tell by looking at the first picture when you power up the phone, if is white ATT, you dont have the latest bootloaders) - install JVB bootloaders with ODIN in PDA section
download the bootloaders package
Flash this kernel (or any other kernel with CWM3) with ODIN in PDA section with Auto Reboot option unchecked
Pull out the battery and disconnect the cable after ODIN said "RESET"
Reboot in recovery using Volume UP + Power button
Install Continuum from sdcard.
Note: If you have gingerbread bootloaders perform this quick test:
go back to stock using the method i just described above (in the install instructions)
test orientation sensor - open browser and see if it reorients.
if it doesn't work, i recommend flashing again the bootloaders pack
Updates can be found in post number 2 and can be flashed from ClockWorkMod recovery 3 only.
Themes can be found here
Bug tracker
Important Note:
After flashing bootloaders the key combinations to enter recovery/download mode are as follows:
Recovery Vol UP + Power
Download Vol Down + Power or Vol Down + USB insert
It has been reported that an inverted combination worked for some. Try that as well if you cant get the ones above to work
I recommend keeping RFS for best battery life.
As well, keep applications on internal memory, don't move the to the sdcard! Makes the loading slower and some things might not work as they should! You've been warned!
Come chat with us on irc at #project-continuum
As usual, donations are highly appreciated! I do this mostly for fun but a little more motivation always speeds things up
Thanks go to:
eXistZ for the heart of this ROM
MaxRabbit, Elisha, FroggyStyle, surfed for hosting
shoman94 for modem expertise, themes porting and forum support
DAGr8 for lockscreen sources adapted for I9000
xcaliburinhand for building the original reoriented kernel
untermensch, Sbrissen, dhiru1602, Rimmer1966 for the 5 lockscreen and extended power menu sources and tweaks
connexion2005 for the video walk through
MikeMike01 for the haptic feedback
verysafety for the bootanimation
sailerboy for oferring a BNC for IRC channel
for.digit for the keyboard
Lukiqq for the volume tones mod
Maybe others which I gorgot...
Thanks everyone for donations! You + plus my addiction keep this project alive.
Changelog and downloads - these pachages are to be flashed with CWM3 ONLY!
6/8/2011 - v 5.6 - Download links and changelog here
5/20/2011 - v5.5 - Download | Mirror | Mirror md5: 7C92599BC72F621C488205C3D8650405
* FLASH ONLY FROM ClockworkMod 3!!! (orange recovery) *
If you flash from VWM2 your applications will be deleted on reboot.
---------------------------------------------------------------------------------------------------------------
in case you have CWM2 (green text usually), not to be forced to flash Talon kernel via ODIN, you may flash the ROM in this order:
- from CWM2, flash the ROM
- after installation, go to advanced - reboot in recovery (or pull out the battery and reboot in recovery using the keys combo)
- now you should have CWM3, install the ROM again and reboot
---------------------------------------------------------------------------------------------------------------
* wipe release (new base) *
* no need to disable lagfix (disable lagfix=convert to rfs)*
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
* JVB kernels are not compatible with JVO (JVH kernels yes) *
* JVB themes are not compatible with JVO (JVH themes.. maybe) *
Started from scratch with XXJVO base
Unthemed! Themed version will be up soon.
Removed TW4 (as it removes the speed of Gingerbread)
Added tweaked TW3 with lanscape support.
Removed MTM GB KB, replaced with Perfect KB - thanks to for.digit
Fixed issue when Voodoo Control app would not be visible in the Market.
Added 3 packs in Continuum_content folder on sdcard containing:
- option to disable beam animation
- option to disable overscrool glow in favor of overscrool bounce effect
- pack with all SGS blootware.
Added new wallpapers to ContinuumWallpapers app
Fixed Gingerbread Launcher wallpaper setting issue
Fixed buttons layout on endcall screen
Fixed orientation issue in phone, now it obeys the orientation settings.
Added separate tone for each volume level while pushing the vol buttons - thanks to Lukiqq
Maybe some other which I forgot.. Ill add them here if I remember5/9/2011 - v5.4.1 - Download | Mirror | Mirror md5: 3324CB60855BE2D6954D0D1D253E2F9E
* non wipe release *
* if you come from an earlier release - earlier than v5.4 - or different ROM, perform a factory reset from recovery *
* no need to disable lagfix *
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
* JVB kernels are not compatible with JVH *
* JVB themes are not compatible with JVH *
Added Talon kernel 0.1.7 Test 10 (all issues should be solved now)
Added Moded Gingerbread launcher - Landscape and Drop to uninstall capabilities
Added MTM Gingerbread Keyboard5/9/2011 - v5.4 - Download | Mirror | Mirror - md5: 062EB993AB7EB761FCEAEA5DDB254D8F
* wipe release, however, perform a factory reset from recovery just to be sure *
* flash over anything *
* no need to disable lagfix *
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
* JVB kernels are not compatible with JVH *
* If you have troubles take a look here *
Started from scratch with JVH as a base
Exclusive Talon 0.1.7 kernel for JVH from eXistZ with OC cap. up to 1.5GHz (No OC/UV by default, after startup set it from Voltage Control app)
Multiple tweaks available in Tweaks app.
All lags should be gone on this release (for me is lightning fast)
Camera has option to enable/disable GPS tag5/6/2011 - v5.3 - Download | Mirror md5: 1E05275EFF20371295612F9D80590ADA
* non-wipe release , however, emails and email account will be wiped *
* davik cache is wiped, initial boot will take a while *
* flash over v5.2. If you come from an earlier release, it is recommended that you perform a factory reset *
* no need to disable lagfix *
* preferably flash with power cable unplugged *
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
Replaced Email app with Email from Continuum4 (2.2.1)
Removed Email widget, SevenEngine (needed to run Email from SGS2) and Digital clock (cute but stupid)
-----------------these changes removed the lag, mainly removing SevenEngine.apk and Email.apk--------------------
Added FuguTweaks v0.2
Added Mod Version and Full kernel name and build date to Settings - About Phone
Added "link voice call volume with notification volume" option in Settings - Sounds - Volume 5/4/2011 - v5.2 - Download | Mirror | Mirror md5: EC36AC5A95E0E7D30CE4228403D4C58A
* non-wipe release * it seems that it wipes the text messages though, please backup those *
* only davik cache is wiped, initial boot will take a while *
* flash over v5.1. If you come from an earlier release, it is recommended that you perform a factory reset *
* no need to disable lagfix *
* preferably flash with power cable unplugged *
* if you're running a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* if you're caught in a boot loop, reboot in recovery and just install the rom again *
Fixed media playback issues (disabled stagefright, if wanted you can enable it from Tweaks app)
No UV and no OC (you can tweak those from Voltage Control app)
Removed several TouchWiz 4 widgets causing insane lag
Added several FlipFont packages (thanks to pauldiddy)
Thinking of removing TouchWiz 4 in next release... If is too laggy for you, use the alternative launchers.5/3/2011 - v5.1 - Download | Mirror | Mirror md5 hash: 57AFB2392A821E3634A8FD00D4733BFC
* flash over previous releases *
* no need to disable lagfix *
* wipe release, backup your apps *
* preferably flash with power cable unplugged *
* if you are already in a gingerbread ROM, you do not need to update bootloaders! (because you have them already...)*
* you do not need to go back to stock, the rom performs a full wipe (except sdcard) during installation *
* if you're caught in a boot loop, reboot in recovery and install the rom again *
Fixed Puzzle lockscreen layout
Fixed Glass lockscreen layout when displaying notifications
Fixed 3D rendering issues
Fixed Keep The Lights On control on soft buttons backlight
Added Haptic feedback (Thanks MikeMike01)
Removed Video call references from everywhere (thanks to Crysis21)(if you find any left, let me know)
Added stock TW4 launcher
Added Email app from SGS 2
Added Google Talk with video and voice capabilities (could not test them, please report if it works)
Almost all system apps gingerbread themed.
Added a bunch of SGS 2 widgets !One widget called "Month" will crash TW! Do not use it!
Changed Rotary lockscreen jog image (thanks CyanogenMod)
Added Continuum Wallpapers APP, more than 20 custom wallpapers including ones found in previos versions of Continuum
Increased ligheness of menu icons for better view
Swype and Samsung KBs from SGS 2 (tons of languages!!!)
Auto rotation/brightness and wifi disabled by default.
Replaced Thinkoffice with QuickOffice (default on Captivate)
Added ro and rw commands for easy mounting of /system read/write and read-only.
Added terminal for making it easier to run these commands (make sure you type su first to get root rights)
Updated kernel to Talon 0.1.5.
Added new boot animation (green as gingerbread's icons )
Forgot to add lots of fonts... will do in next release
Apps in /data/app - which will be removed if you perform a factory reset
Code:
Arclauncher
AstroFM (for enabling browser downloads)
Google CarDock app
CPU spy
Voltage Control
Maps
Youtube
DeskHome
Google GenieWidget
HeLauncher
Daily Briefing
Keep The Lights ON
QuickOffice
SGS2 live wallpapers
TiBU
28/4/2011 - v5 RC3 - Download
* assuming that you have already new bootloaders, flash from recovery ONLY AFTER you flashed latest Talon kernel via ODIN - this is a must: latest kernel via ODIN! make sure you perform a hash check first to avoid surprises *
The reason is because ODIN flashed both blm7 and 8 (unlike zips found on xda which only flash bml7) which makes the system more stable
This is how I do it and this is how my rom installs it's kernel, is your choice if you want to flash over without flashing the kernel via ODIN, but dont be sad when I'll say "I told you so"
* this is a wipe release, make sure you backup your apps *
* you may flash this over ext4 partitions (you dont need to disable lagfix) *
Fixed Bluetooth bug
Fixed About phone crashing when using other keyboard than stock
Fixed battery charge issue (maybe..). If not fixed, try the Flight mode for 15-30 sec while charging.
Clock is set to 1GHz and UV of -50mA on all steps.
Added Lanscape Dialer and Phone
Removed ascending ringtone
Removed GPS tagging in Camera (don't ask me to put it back, is a direct attack on privacy not having an option to disable/enable it)
Implemented TouchWiz 4 launcher
Added Gingerbread keyboard back
Added Samsung Keyboard and Swype from JVK (especially for Spanish support)
Added moded ArcLauncher
Replaced gingerbread launcher with HeLauncher
Upgraded to latest Talon kernel (1.1.3) - not available on original thread yet
KTLO is now working.
Auto brightness disabled - saves battery
Moved several apps from /system/app to /data/app
Added secret live wallpapers back
Added Voltage Control and CPU spy
4/27/2011 - v5 RC2
* flash from recovery ONLY AFTER you flashed once the initial package WITH bootloaders (no need to flash it again if you did already, basically you can flash this if you already have gingerbread bootloaders)*
* this is a wipe release, make sure you backup your apps *
* for those that run a kernel that allowed them to activate lagfix, disable it before flashing *
Who has problems with Bluetooth or various inexplicable problems, power off your device and turn it on again.
Switched to eXistZ's kernel: Talon
Fixed one AOSP lockscreen issue that generated soft reboot.
Fixed rotary lockscreen - the silent button first checks for vibration setting and puts the phone in silent with vibration (if enabled) accordingly.
Changed system font to Galaxy S II font
Added SIP configuration in Call Settings
Fixed multitouch - thanks cgnadt for the tip
Several visual changes4/23/2011 - v5 BETA3 - non wipe
* flash from recovery ONLY AFTER you flashed once the initial package WITH bootloaders (no need to flash it again if you did already, basically you can flash this if you already have gingerbread bootloaders)*
* if you have force closes on About Phone in Settings, flash the package without bootloaders with ODIN and then C5beta3 from clockworkmod recovery - your data will be kept *
Fixed more visual bugs
Updated the kernel to vG.1.0
Added Gingerbread keyboard
Set Auto Rotation ON by default.4/23/2011 - v5 BETA2 - non wipe
- flash from recovery ONLY AFTER you flashed the initial package WITH bootloaders -
Fixed several visual issues
Added black google search widget
Added black power control widget (reboot if the buttons dont appear)
Added Dock settings in Settings.apk
Changed modem to I9000TDVJP9 - thanks shoman94 for the tests and suggestion
Removed FMRadio app
Added bash shell
Moved su and busybox binaries from /system/xbin to /system/bin
Modem and kernel flash is working.4/21/2011 - v5 BETA1.
Based on I9000XWJVB, gingerbread 2.3.3
Extended power menu
5 lockscreens. Wallpaper can be set on all of them.
MMS/SMS removed from logs
Hacked camera: taking pictures/videos with power button and on low battery. Dont touch the FFC button!
Phone without ascending ringtone.
Killed battery full notification.
Browser with user agent settings and tab limit increased to 8.
Removed several useless fields in Settings.
Added back keep the screen on in Development settings.
Wifi scan interval increased to 30 sec.
Updates system apps.
Rooted, zipaligned, deodexed.Known issues:
Battery drain after charging hits 100% - affecting all GB based ROMs, not only Continuum. Investigating the cause.
For other battery drain issues check this: http://forum.xda-developers.com/showthread.php?t=1039696
The display goes dark when making first phone call after reboot. You can get it back on by swyping your finger in front of the proximity sensor or put it at your ear and take it off.
Buttons dont turn ON on screen touch
Reserved___
reserved__
And so it begins....
Sent from my SAMSUNG-SGH-I897 using XDA App
We're not worthy!
and it beings
what the fudge!!!! time to flash me some gingerbread goodness =D
How convenient. The phone is already flashed to stock/cleared and is sitting here with a full battery.
Downloading now.....(NM, I'll hang out for the w/bootloader version)
yep i just came...
seems like a race to the wonderland
it seems like forever for it to upload haha
Sh*t just got real.
EDIT:
Screenshots ?
I already have a JVB rom, and the new bootloader, will the without bootloader package work, or I still need to flash your bootloader one ?
singalkalpesh said:
Screenshots ?
I already have a JVB rom, and the new bootloader, will the without bootloader package work, or I still need to flash your bootloader one ?
Click to expand...
Click to collapse
You only have to flash the new bootloader once.
Impatiently waiting for the download link.
So this is just the stock ROM or has anything (besides kernel and key mappings) been changed? Does it need to be rooted or has it been rooted already and comes with su and the superuser app? If it needs to be rooted, will the rageagainsthecage work?
Thanks!
harpo1 said:
You only have to flash the new bootloader once.
Click to expand...
Click to collapse
That I got, I've flashed couple of ROMs from I9000 thread, I was just making sure that the only thing missing from "without bootloader" is bootloader, as he says the recovery might not work too.
singalkalpesh said:
That I got, I've flashed couple of ROMs from I9000 thread, I was just making sure that the only thing missing from "without bootloader" is bootloader, as he says the recovery might not work too.
Click to expand...
Click to collapse
Some who haven't flashed with bootloader were experiencing recovery and other minor problems.
Say what?! just got v4 on my phone
time to move on anyways
Ok I am signing up for feedback from CM7 users testing this one.
Download:
http://forum.xda-developers.com/attachment.php?attachmentid=654588&d=1310632842
and
http://www.multiupload.com/3XLX2V3QWR
What's in ROM:
- Region set to Xeo
- Deodex KPH ROM
- Kernel 3.7 CF-ROOT
- Juwe's RAM script
- Animation CRT (please include all animations)
- PowerMenu
- Old Android Market
- New Sony Sketch font
- Gingerbread Launcher
- GO LUncher EX
- Smoother animations
- CM7 Bootanimation
- Left the bells added in FirstUA 1.1
- Supports DTA2SD - Enter Tweak Manager and select DT: Auto start and reboot. (DTA2SD to work the card must have a partition EXT4).
- CVM Manager
- Ext4 Manager
- Ability to change the font and add new fonts
- Ability to set your own MP3 as ringtones
- Google + (social networking applications)
- The percentage of battery theme
installation:
1st Copy the file and ClockWorkModAce.zip CyceronPLv1.0.zip memory card
2nd Install a plain KPH using Odin'a - (if you have it skip this step)
3rd Enter Recovery (Home + Power) and install ClockWorkModAce.zip - (if you are already ClockworkMod recovery you can skip this step)
4th Take a restart, and then do wipe data / factory reset the recovery
5th Install the recovery CyceronPLv1.0.zip
6th After installation, reset the phone (the first run will take quite a while)
7th Run selected tweaks in the Tweaks
8th Enjoy the new CustomRomem
Nice work dude...pls post screenshots..
cyceron said:
Download:
http://forum.xda-developers.com/attachment.php?attachmentid=654588&d=1310632842
and
http://www.multiupload.com/3XLX2V3QWR
What's in ROM:
- Region set to Xeo
- Deodex KPH ROM
- Kernel 3.7 CF-ROOT
- Juwe's RAM script
- Animation CRT (please include all animations)
- PowerMenu
- Old Android Market
- New Sony Sketch font
- Gingerbread Launcher
- GO LUncher EX
- Smoother animations
- CM7 Bootanimation
- Left the bells added in FirstUA 1.1
- Supports DTA2SD - Enter Tweak Manager and select DT: Auto start and reboot. (DTA2SD to work the card must have a partition EXT4).
- CVM Manager
- Ext4 Manager
- Ability to change the font and add new fonts
- Ability to set your own MP3 as ringtones
- Google + (social networking applications)
- The percentage of battery theme
installation:
1st Copy the file and ClockWorkModAce.zip CyceronPLv1.0.zip memory card
2nd Install a plain KPH using Odin'a - (if you have it skip this step)
3rd Enter Recovery (Home + Power) and install ClockWorkModAce.zip - (if you are already ClockworkMod recovery you can skip this step)
4th Take a restart, and then do wipe data / factory reset the recovery
5th Install the recovery CyceronPLv1.0.zip
6th After installation, reset the phone (the first run will take quite a while)
7th Run selected tweaks in the Tweaks
8th Enjoy the new CustomRomem
Click to expand...
Click to collapse
Hey!
Nice to see new ROM. Will let it try. Some screenshots PLEASE?
Only one question, dose it ROOTED already?(I hope YES)
Cheers!
casiocas said:
Hey!
Nice to see new ROM. Will let it try. Some screenshots PLEASE?
Only one question, dose it ROOTED already?(I hope YES)
Cheers!
Click to expand...
Click to collapse
It's already rooted.
Tweaks Manager and Data2SD won't work if it's not rooted.
casiocas said:
Hey!
Nice to see new ROM. Will let it try. Some screenshots PLEASE?
Only one question, dose it ROOTED already?(I hope YES)
Cheers!
Click to expand...
Click to collapse
it uses cf root so its rooted.
chinoyray said:
It's already rooted.
Tweaks Manager and Data2SD won't work if it's not rooted.
Click to expand...
Click to collapse
Hey!
Thats I was thinking!
CHEERS!
cyceron said:
Download:
http://forum.xda-developers.com/attachment.php?attachmentid=654588&d=1310632842
and
http://www.multiupload.com/3XLX2V3QWR
What's in ROM:
- Region set to Xeo
- Deodex KPH ROM
- Kernel 3.7 CF-ROOT
- Juwe's RAM script
- Animation CRT (please include all animations)
- PowerMenu
- Old Android Market
- New Sony Sketch font
- Gingerbread Launcher
- GO LUncher EX
- Smoother animations
- CM7 Bootanimation
- Left the bells added in FirstUA 1.1
- Supports DTA2SD - Enter Tweak Manager and select DT: Auto start and reboot. (DTA2SD to work the card must have a partition EXT4).
- CVM Manager
- Ext4 Manager
- Ability to change the font and add new fonts
- Ability to set your own MP3 as ringtones
- Google + (social networking applications)
- The percentage of battery theme
installation:
1st Copy the file and ClockWorkModAce.zip CyceronPLv1.0.zip memory card
2nd Install a plain KPH using Odin'a - (if you have it skip this step)
3rd Enter Recovery (Home + Power) and install ClockWorkModAce.zip - (if you are already ClockworkMod recovery you can skip this step)
4th Take a restart, and then do wipe data / factory reset the recovery
5th Install the recovery CyceronPLv1.0.zip
6th After installation, reset the phone (the first run will take quite a while)
7th Run selected tweaks in the Tweaks
8th Enjoy the new CustomRomem
Click to expand...
Click to collapse
Dude nice ROM ... i alwaz wanted a 1% battery mod ROM .. Thanx
Aadigoku13 said:
Dude nice ROM ... i alwaz wanted a 1% battery mod ROM .. Thanx
Click to expand...
Click to collapse
i think it's just a theme and not a kernel mod
Looks like FirstUA-ROM-v1.1...!!
It's based on FirstUA
Hey!
Here some screenshots
Cheers!
mundixx said:
i think it's just a theme and not a kernel mod
Click to expand...
Click to collapse
Yea its Theme ... but there r less themes with % battery mod ...
I didnt mention anything abt kernel do i ??? ^^
casiocas said:
Hey!
Here some screenshots
Cheers!
Click to expand...
Click to collapse
Nice screenies ... Thanx for it
cyceron said:
It's based on FirstUA
Click to expand...
Click to collapse
Nice work dude..but how it is different from FirstUA..?
Hey!
I see some problems:
1)WIFI not turning ON.
2)Not ROOTED.
CHEERS!
Ok. I will update about 20 minutes
cyceron said:
Ok. I will update about 20 minutes
Click to expand...
Click to collapse
Hey!
Dont hurry, will see, dose the others have the same problem or not. Because I was trying to go directly from FirstUA-Rom-V1.1
Wait dont hurry yet!
CHEERS!
casiocas said:
Hey!
I see some problems:
1)WIFI not turning ON.
2)Not ROOTED.
CHEERS!
Click to expand...
Click to collapse
Hey!
Your fast man, good beta tester.
@cyceron
Can you include LG keyboard on your 20 mins update? update to 2.3.6 market and remove titanium backup its useless.
Maybe this will make this rom different from UA.
royskeyz said:
Hey!
Your fast man, good beta tester.
@cyceron
Can you include LG keyboard on your 20 mins update? update to 2.3.6 market and remove titanium backup its useless.
Maybe this will make this rom different from UA.
Click to expand...
Click to collapse
Hey!
Jeah I try to test them ALL(if I can). Just I want to find ROM, what best will fill my needs.
CHEERS!
casiocas said:
Hey!
Jeah I try to test them ALL(if I can). Just I want to find ROM, what best will fill my needs.
CHEERS!
Click to expand...
Click to collapse
Fast reply.. nice!
Question, did u flash from stock XXKPH or flash it from FirstUA?
Updated 03/14/2012 FrankenTAB v1.1.0
FrankenTAB aims to pick up where the gtab-devs left off with the Froyo based VEGAn-TAB 1.00 b5.1.1 (our v001a is a direct port of b5.1.1 to BL 1.2 with a clemsyn kernel). The current build is a heavily modified Brilliant Corners 1.3.1 base (advanced version of VEGAn-TAB 1.00 b5.1.1), with an overclockable (1.6ghz) & undervoltable kernel from the Clemsyn universal Froyo Skype Fix.
1) This MOD is based on Roebeets' Brilliant Corners ROM for the GTablet. See the description for Brilliant Corners for more info.
2) I am using the latest kernel and WIFI drivers (Skype/SOD/PPP fixes) from Clemsyn, all thanks for the speed of this ROM should go to him.... not me. This ROM is overclockable (to 1.6Ghz) and undervoltable via SetCPU (Get it from XDA if you are a member, or from the market if you want to support the developer)
3) Jcp171, Cobey, and Sharpe351 have been a huge help to me with FrankenTAB. Much thanks goes out to them for their continued help and support.
4) I got the blessing from GoJimi to include the newest version of VTL Launcher in our rom (v1.7.5 - This is NOT on the market yet). I would suggest that you drop in over at http://vegantab.gojimi.com/ to see what's going on with the OFFICIAL VEGAn-TAB ROM, which is based on GINGERBREAD, and show your support for further development of VTL Launcher by purchasing the release version from the Android Market or via a donation on the VT-Labs / VEGAn-TAB website.
INSTALLATION NOTES:
Before attempting to install this ROM, please understand how to use NVFlash (Roebeets thread) to restore your system should something go wrong.
You will ABSOLUTELY need to do a data wipe / factory reset with CWM BEFORE install. I also recommend formatting your sdcard and wiping the dalvik cache before install. my current procedure is:
1) NVFlash to version a 1.2 bootloader base image including CWM
2) Perform my wipes in CWM (data / cache / Dalvik / Format SD)
3) Mount the Tablet via USB from inside CWM / Copy all the needed files to the tablet
4) Install the Rom in CWM
5) Reboot
In more extreme cases a tougher wipe may be necessary:
0) MAKE BACKUPS OF WHAT YOU WANT TO KEEP
1) boot into CWM and format your sd card to 4096/0 then back to 2048/0 (this has cleared some of the problems for some people)
2) format dalvik cache
2a) -skip this step the first time you try, but it may end up being necessary- NVFlash back to a stock 1.2 setup that includes NVFlash (if you are on windows, I posted my NVFlash folder link (HERE) that has a few batch files for stock or CWM recovery)
3) wipe data / factory reset (in CWM)
4) -my method- format /system & /data (by doing this, it basically makes blank, formatted partitions)
4a) wipe dalvik cache again! especially if you let your system fully boot after the NVFlash - CLEAR THAT CRAP OUTTA THERE!!!
5) mount usb and copy over the zip file to the root of your internal sd card (which should be empty after part 1 - if not repeat step 1)
6) install zip from sd card
7) Reboot.
MAJOR RELEASE NOTE: The version 1.1.0 release is a full installation package with a completely new base. As such, please make a backup of your data just in case a full wipe becomes necessary during your upgrade process. I highly recommend a fresh start, but since we are upgrading the kernel, a wipe of the dalvik cache is mandatory at the very least.
APPLICATION COMPATIBILITY: KNOWN ISSUES as of release v1.1.0
(Thanks to Jcp171, Cobey, and EVERYONE for helping work through the app testing):
General Apps:
1. Market: Working properly with the standard market fix... slightly limited before the fix.
2. Skype: working. I have been using it for a while now and it seems to work like a champ.
E-mail:
1. Default E-mail: Works great, but being a non-Gingerbread ROM, Secure Corporate E-Mail setups may not work (Mine does not because of lack of appropriate security suppprt)
File Managers:
1. ES File Manager: Ran fine, was able to give file manager root. UPDATE: You can just long-press the STAR icon to get to the root directory. (THANKS bdds13!)
2. iFileManager: Works fine, but is just a basic file manager. For root access use ES file explorer or root explorer.
Utilities:
1. Anreboot: Fine for reboots, but DO NOT USE THIS TO REBOOT INTO RECOVERY. It will likely only ever reboot into recovery forcing you to NVFlash the device to get it working again.
Games:
1. Plants Vs Zombies: (Doesn't work)Loaded and got all the way into the first level but quickly crashed. Will crash at some point either loading or trying to play. At the most it's extremely unstable...
2. Gem Spinner II: Not functional
3. Game compatibility with several games improved (Cut the rope now works) by removing the undervolt and returning voltages to default levels (still at 1.6ghz). May vary tab to tab... (Note: Even lowering the speed to 1ghz did not change Plants vs Zombies or Gem Spinners non-functional statuses...)
Any other apps we tested worked. Please let us know if you find an app with a problem and we can make sure to confirm the issue to help Pix out.
CHANGELOG:
v1.1.0
- Based on Advent VEGA Firmware v1.10
- Kernel - clemsyn 2.6.32.9 (MM061 #128) - 1.6GHz OC/UV/SOD protection/Skype fix/PPP support
- Updated to latest Market (Google Play) along with some of the other Google Apps.
- New wallpaper
v1.0.9
- Updated Kernel to clemsyn 2.6.32.9 (MM061 #128) - 1.6GHz OC/UV/SOD protection/Skype fix/PPP support
- Build Prop tweaks.
- System tweaks
- This is a FULL install
- Final version to be based on Advent VEGA Firmware v1.09
v1.0.2
FT 1.0.2 with default kernel at 1.6ghz:
Smart Bench:4857/2263
Quadrant:3456
FT with NEW 1.6ghz SOD fix by Clemsyn applied
Smart Bench:5022/2381
Quadrant:3416
- ADB works fine
- Market still requires the market fix, but more apps show up now (back to the olympus settings)
- Revised graphics in framework-res.apk
- Incorporated build.prop tweaks by JCP and the rest of the community - THANKS FOR THE HELP
- Most other features from v1.0.0 remain the same in this release.
v1.0.1
- POSSIBLE ADB ISSUE - TO BE CORRECTED IN 1.0.2
- Incorporated build.prop tweaks by JCP and the rest of the community - THANKS FOR THE HELP
- Returned to the default android font
- Most other features from v1.0.0 remain the same in this release.
v1.0.0
- Incorporated the G-Sensor Fix to allow games and apps to read the orientation of the tablet correctly.
- Most features from RC1 have stayed the same in the OFFICIAL release.
- Added the most up-to-date (and working) version of the Android Terminal Emulator (by jackpal)
v1.0.0 RC1
- Reworked more icons - Icons were picked & modified from Froyo, GB, HC & ICS
- Added new basic boot animation
- Added new default wallpaper (working on a wallpaper picker app to include more)
v004b
- Replaced our custom launcher with VTL Launcher 1.7.5 from gojimi (thanks again)
- Removed ASUS Water LWP (was broken by skype kernel)
- Removed nexus prime bootanimation
- Minor Build Prop changes (still @ LCD Density of 160)
- Reworked framework-res.apk (thanks to the UOT Kitchen)
Reworked lock screen sliders
Reworked color scheme
Changed fonts for a different look
v004a
- Modified boot.img to fix install error that bdds13 was having (needs to be tested)
- Added new 2nd boot logo
- Added new bootanimation.zip (nexus prime - possible slowdown issue here)
- Minor Build Prop change to test market compatibility (olympus device prop - still @ LCD Density of 160)
DOWNLOADS:
Grab FrankenTABv110 FULL from HERE
If you try it out and it doesn't work or your house burns down, or your cat turns into a zombie, IT'S NOT MY FAULT!!!
FULL INSTALL - 130.07 MB DOWNLOAD
OLDER DOWNLOADS:
Grab FrankenTABv109 FULL from HERE
FULL INSTALL - 107.6 MB DOWNLOAD
Grab FrankenTABv100 FULL from HERE
If you try it out and it doesn't work or your house burns down, or your cat turns into a zombie, IT'S NOT MY FAULT!!!
Grab FrankenTABv101 UPDATE from HERE
UPDATE ONLY - REQUIRES v1.0.0 TO BE INSTALLED FIRST - 9.78 MB DOWNLOAD
Grab FrankenTABv102 UPDATE from HERE
UPDATE ONLY - REQUIRES v1.0.1 TO BE INSTALLED FIRST- 9.76 MB DOWNLOAD
SPECIAL ADDITIONS:
"I have included 1.6 ghz, Skype fix, PPP. With PPP, I had to upgrade the wifi drivers to get it to build so not sure SOD fix will hold but please test for me thanks." - Clemsyn
Clemsyn has asked us to test his latest kernel build for froyo with SOD protection, Skype fix, and PPP support. Grab the download and let the testing begin. If it goes well I will incorporate it into the v1.1.0 release of FrankenTAB. UPDATE 02/08/2012 - This will be the new default kernel in the v1.1.0 release - all tests confirm this to be an excellent release from clemsyn.
Grab FrankenTABv001a from HERE
- v001a is based on VeganTAB 5.1.1 just ported to the 1.2 BL with clemsyns kernel and a market update. (Still seems to be fairly popular - I will continue to support v001a as best I can for those looking for the classic VEGAN experience on the 1.2 boot loader.)
SCREENSHOTS:
Work is coming along good on v1.0.2. I hope to have a release ready this weekend. This release will be very minor tweaks to some icons and graphics that were not receiving a lot of love from the community, along with some tweaks to the build prop.
In the next phase of testing I will be looking at kernel options including support for ppp in the default kernel, along with the possibility of an optional kernel or kernels. (will be v1.1.0)
Anyone that wants to test v1.0.2 I have uploaded a testers update HERE please be detailed in reporting any problems or new successes that are found.
Cool does camera or google talk work with camera?
Is this the full ? : FrankenTABv100.zip or is it this one FrankenTABv100RC1-full-install.zip
Thanks cant wait to try it
P.s Oh NVM i see its 2.2 none of the new Google apps will work thanks
Version 100 is the latest full file. version 100rc1 is the older release candidate.
no PPP support
Same like other ROM with clemsyn kernel
I try to use pppd (pppd /dev/rfcomm0 call xxx) but got message below
pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module, try `/sbin/modprobe -v ppp'. If that fails, check that
ppp.o exists in /lib/modules/`uname -r`/net.
See README.linux file in the ppp distribution for more details.
Any chance to compile kernel with PPP support ??
I can ask clem to compile me a custom kernel, but it may take a lil while. I had planned to ask for something custom from him anyway so I will toss that in too. I will post an update in the second post when I hear from him, so keep an eye out.
I have been running this since 1.0.0 and love it. This is the ROM I have settled on. After trying Gingerbread and HC, I came back to Froyo for estability and speed. Love the icons on the status bar (Home, back, menu). All acceleration works including HD video. Like I said, very smooth and stable. All the games also work with it.
Netflix, Flash, Skype work.
Just loaded up over flashback, no problems here. Running so great!!!
Sent from my SGH-T959 using xda premium
Excellent ROM
Love it!
I love it!
Are you considering changing the icons to ICS themed icons?
I may look into it for a future release, but right now I have to post the update (v1.0.2 is live) and try to confirm that, with the new kernel that clemsyn compiled for us, SOD issues are solved and SKYPE IS WORKING PROPERLY!!
watch the OP in the next few mins for the updates and details!!
"I have included 1.6 ghz, Skype fix, PPP. With PPP, I had to upgrade the wifi drivers to get it to build so not sure SOD fix will hold but please test for me thanks." - Clemsyn
Clemsyn has asked us to test his latest kernel build for froyo with SOD protection, Skype fix, and PPP support. Grab the download and let the testing begin. If it goes well I will incorporate it into the v1.1.0 release of FrankenTAB
Download link is in the OP under SPECIAL ADDITIONS
why the hell i can't boot any rom , after installing flashback 10.3 ?!
You should NVFlash back to stock, and then try to install. Thats the best help I can give with the information you have provided.
Good luck. If that doesnt do the trick, let us know and we can try to work through it.
PixelRider said:
You should NVFlash back to stock, and then try to install. Thats the best help I can give with the information you have provided.
Good luck. If that doesnt do the trick, let us know and we can try to work through it.
Click to expand...
Click to collapse
thanks
i'll try it now
I hate to see someone get frustrated and give up. I hope it works for you this time.
PixelRider said:
"I have included 1.6 ghz, Skype fix, PPP. With PPP, I had to upgrade the wifi drivers to get it to build so not sure SOD fix will hold but please test for me thanks." - Clemsyn
Clemsyn has asked us to test his latest kernel build for froyo with SOD protection, Skype fix, and PPP support. Grab the download and let the testing begin. If it goes well I will incorporate it into the v1.1.0 release of FrankenTAB
Download link is in the OP under SPECIAL ADDITIONS
Click to expand...
Click to collapse
Hi PixelRider,
I try pppd on 1.02 update but still got error message below
FYI, I'm trying to do DUN over bluetooth connection
I follow instruction at link here
http://forum.xda-developers.com/showthread.php?t=1406847
It works on cyanogen ROM which is based on gingerbread
But none of froyo based ROM works and always reported such error message
I attach chat binary for froyo which i compile in case somebody
want to try this
pppd: This system lacks kernel support for PPP. This could be because
the PPP kernel module could not be loaded, or because PPP was not
included in the kernel configuration. If PPP was included as a
module, try `/sbin/modprobe -v ppp'. If that fails, check that
ppp.o exists in /lib/modules/`uname -r`/net.
See README.linux file in the ppp distribution for more details.
So far the ROM is great. I came from brilliant corners. My only issue is sometimes with flash, it's all blocky and distorted like a messed up NES cartridge.sound is fine.i fix it by full screening the flash video or changing the resolution, then back. Also, is there a DSP manager, or sound booster working in this ROM (for speakers, not headphones?) Thanks
Wifi can sleep when screen turns off?
Using 1.02 update, I notice also wifi never goes to sleep eventhough
I have setup wifi sleep when screen turn of in wifi sleep policy
Anybody experience the same?
evild said:
So far the ROM is great. I came from brilliant corners. My only issue is sometimes with flash, it's all blocky and distorted like a messed up NES cartridge.sound is fine.i fix it by full screening the flash video or changing the resolution, then back. Also, is there a DSP manager, or sound booster working in this ROM (for speakers, not headphones?) Thanks
Click to expand...
Click to collapse
I am looking into a DSP for later release.
dony71 said:
Using 1.02 update, I notice also wifi never goes to sleep eventhough
I have setup wifi sleep when screen turn of in wifi sleep policy
Anybody experience the same?
Click to expand...
Click to collapse
I will look into wifi sleep and let you know what I find.