Related
Hey everyone,
I am writing this because a day of research and playing about with my phone has resulted in nothing.
I recently rooted my G1 european (UK) phone and ended up with the JesusFreke build absolutely no problems...
Today I updated to the latest radio and SPL (again, no problems) and went to put on the Virtudude Roger's mod first and it froze on the splash screen, so I reverted back to original Android, rooted again and went back to JesusFreke's build.
This time I tried Cyanogen mod, which also freezes on the splash screen.
I have tried going to both these builds straight from Android 1.0 or from the JesusFreke build with no success - it just freezes on the splash screen every time.
Anyone have any advice? Maybe theres something I'm doing wrong on the way?! I use recovery mode to format and load the flash images on
So much thanks in advance!
After rooting the phone and then putting it on JesusFreke's build, you were trying to update the radio and SPL with the 2.22.19.26I radio and the 1.33.2005 SPL (Haykuro's "special" SPL - http://forum.xda-developers.com/showthread.php?t=517593)?
You do risk bricking your G1 with this SPL, but if you follow the directions in the thread exactly, you should be fine (do this at your own risk).
Also, make sure to do a wipe (Alt+W) in recovery before you try to apply (Alt+S) the build update.zip.
Nickizzle said:
Hey everyone,
I am writing this because a day of research and playing about with my phone has resulted in nothing.
I recently rooted my G1 european (UK) phone and ended up with the JesusFreke build absolutely no problems...
Today I updated to the latest radio and SPL (again, no problems) and went to put on the Virtudude Roger's mod first and it froze on the splash screen, so I reverted back to original Android, rooted again and went back to JesusFreke's build.
This time I tried Cyanogen mod, which also freezes on the splash screen.
I have tried going to both these builds straight from Android 1.0 or from the JesusFreke build with no success - it just freezes on the splash screen every time.
Anyone have any advice? Maybe theres something I'm doing wrong on the way?! I use recovery mode to format and load the flash images on
So much thanks in advance!
Click to expand...
Click to collapse
What SPL do you have? Are you wiping before you update?
Thanks for the great advice, I was actually following the instructions you provided and have 1.33.2005 SPL.
I just had no idea why it wasn't working, but I have now sorted it...
I put on the recovery utility from JFv1.43, format/flashed the image for Virtudude, restarted and then just left the house for a couple of hours whilst it was on the splash screen....just came back and it had booted in fine.
Now it boots fine every time (does take a few minutes to boot but worth it!)
So, all sorted now - again, so much thanks for the help - I honestly thought it was because I had an EU model or something like that; unfortunately, searching the forums for "EU" or "UK" doesn't bring up much because of the minimum character limit!!
Let me explain to you the whole story. I obviously know im going to get flamed for this one. I will give you the short short version
I had a rooted MT3G fender with this Rom installed
http:/forum.xda-developers.com/showthread.php?t=669911
It worked all good until i started messing with stuff. I wanted this rom installed
http:/forum.xda-developers.com/showthread.php?t=673394
Since it said 32a and MT3G fender is 32a i assumed that it will install and no problems. So i used the gold card to change radio and spl to the 3.22 series. only to find out that they dont work for my phone. based on this post
"You are now screwed with a downgraded SPL and radio that do not work on this phone YAAAAAAY." -crypysmoker-
[THUNK AND FIXED] Rooting Mytouch Fender LE 32a/ Mytouch 1.2 DONT!!
http:/forum.xda-developers.com/showthread.php?t=622530
So now im thinking great i didnt catch that so let me just move back to where i was before. using the last section of that previous thread to install the stock radio and spl. i have done this already and know it works. so i install the stock radio and spl and the custom recovery. Boot up into recovery and restore nandroid. everything is going ok utill.....it locks up in a boot loop. i then boot back up into recovery and erase data. after that i tryed another nandroid restore and to my wonderful surprise i now lost the ability to mount the sdcard. i restarted and tryed many different cards and all failed. I then boot up into hboot restore with the goldcard and it then locks up at system.
Great now im looking for something to fix this whole mess. after that i try to reinstall the original spl and radio. I then have an error "signature verify failed." Now im thinking WTF!!!!!
I then find a thread about the RUU and how to turn off "S-on" if i install this official HTC app. However come to find out its the asia version. WONDERFUL FOR ME!!! I then found the Official T-mobile MT3G RUU, installed it and now i have a fastboot installed with a memchip with a red circle around it, not the 3 skate droids, and cant boot into HBOOT ,with the volume down button. All that i see is "RUU USB." I have adb but now get the error "remote not allowed." it used to be "signature verify failed." i have no recovery, no HBOOT, just fast boot with RUU USB.
How to i fix this mess up and get back to this?
T-Mobile MyTouch 3g Fender Edition Stock ROM with ROOT!
http:/forum.xda-developers.com/showthread.php?p=5451898&posted=1#post5451898
This is what i have and show
Sapphire pvt 32a ship s-on G
Hboot-1.33.0013 (sapp31000)
cpld-13
radio-2.22.23.02
oct 21 2009,22:33:27
RUU USB
This is definitely a snowball effect right here.
Oh also i cant go and exchange the MT3g fender because im past my 14 days and i already did it on the first day. LOL
I actually am stuck on the same screen with the same phone. I hope someone has been able to get this fixed
Damn, not trying to be mean, but you screwed up a lot.
I have the same version device as you, and I upgraded my radio/SPL. and did a lot of stuff, i semi-bricked it, but i got it working again. I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Try following this theunlockr[DOT]com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
The problem is that the phone is stuck in a bit of an interesting state. You can't flash from an RUU at this point because the engineering SPL used to root the phone is version 2.53.x, while the RUU's ROM is 2.10.x. You also cannot flash any images to the phone because the SPL is locked (S-ON). So the only way to fix the phone at this point would be to somehow get an HTC-signed 2.53+ ROM for the SAPP31000 (mytouch 3g 1.2/fender) or find a way to unlock the SPL. I had a nice chat with some of the Modaco guys and we went through a lot of options with none of them working. The phone's basically in a bit of a chicken vs. egg state. So personally, I will be building a serial cable to manually unlock the SPL so that I can flash images back on manually.
So, while I wish it was as easy as just re-flashing the phone, you can't do that with a locked SPL and no HBOOT mode available. Onward to a serial/TTL cable advendure!
Once I get the parts in to build it, I'll follow up here with my results
shintokun said:
I suggest you re-root your whole entire phone. including flashing all the radios, spl,recovery, and etc.
Click to expand...
Click to collapse
Okay I'm lost, weary of trying things as I'm not 100% clear on alot of this stuff.
Here's what I did, I recently had tmo replace my original mt3g, sadly the replacement gave the version is older or whatever message. I've gone through the steps and now I'm stuck at the boot up splash screen. I'll post what i've done so far, hopefully someone can identify whats gone wrong and steer me
Ok I followed the instructions here:
h~p://theunlockr.com/2009/08/14/how-to-root-your-mytouch-3g/
h~p://theunlockr.com/2010/03/10/how-to-create-a-goldcard/
h~p://theunlockr.com/2009/10/06/how-to-set-up-adb-usb-drivers-for-android-devices/
That worked, the phone was rooted and booting.
I then installed the the AMON_RA recovery img and I've tried both flavors
recovery-RA-sapphire-v1.7.0H.img
recovery-RA-sapphire-v1.7.0G.img
I forget at this point, but I think the G didn't work for me, but i have H working.
From there I began following the instructions on cynogen mod to install...
h~p://forum.cyanogenmod.com/topic/394-cyanogenmod-5-for-dreammagic-mean-lean-pastry-machine-v508-06192010/
h~p://forum.cyanogenmod.com/topic/278-installation-support-line-cyanogenmod-5-for-dreammagic/
h~p://wiki.cyanogenmod.com/index.php?title=Full_Update_Guide_-_HTC_Magic_%2832B%29
I booted the the recovery, wiped everything, installed the cm base, then gapps and powered down and powered on, stuck at splash...
I've tried a few variances and just to make sure, i went back to recovery and installed the Rom-RAv1.1.0H-signed-update.zip again to make sure it was working. It booted right up.
Ok so here is my phones info from the vol down + power hboot menu
sapphire pvt 32b eng s-off h
hboot-1.33.2005(sapp30000)
radio-3.22.20.17
apr 20 2009,15:30:43
I'm not sure of what else to include, my minds melted at this point.
It was so easy to root my old mt3g, this new model just makes me feel like an idiot.
*edit* Here is the info from my phones settings>about with the Rom-RAv1.1.0H-signed-update.zip loaded
Model: Ion
Firmware 1.5
Baseband 62.525.20.18h_3.22.20.17
kernel 2.6.27-cb85e129
[email protected] #3
Build #
cr843
Hmm
Did you root your phone using the MyTouch Rooting guide? Or the MyTouch 1.2 (has 3.5 mm headphone jack) guide? From what it sounds like you got the updated model of the MT3G.
If you used the Rooting guide for the old model and you have the new one, you will have issues. Heres the link:
h~p://theunlockr.com/2010/03/11/how-to-root-the-mytouch-1-2-and-fender-mytouch/
If I'm right, you should have no issue re-rooting your phone.
Good luck, hope this helps.
<grin> that's another aspect of my mind melting yesterday, making sure i wasn't following instructions for the wrong version of the phone.
I have the original base model, no 3.5mm.
Tmo sent me the replacement phone about a month ago.
So that said, I think I followed the original versions instructions.
Flashing back to the old version
Rom-RAv1.1.0H-signed-update.zip
the phones worked fine all night and I got it doing the things i rooted for in the first place, sharing my cells inet to my laptop etc. so I can live with this until the weekend I suppose but still want to figure out why i couldn't get cynogen mod 5 running.
Okay i have an idea what might be going on, just my guess at this point.
I think i have mix matched mt3g-a and mt3g-b files.
Here's my thinking...
recovery-RA-sapphire-v1.7.0H.img - works
recovery-RA-sapphire-v1.7.0G.img - doesn't work, sits at splash screen
Rom-RAv1.1.0H-signed-update.zip - works, but shows up in settings>about Model = ION. I think Ion is the mt3g-a flavor...
I tried today to use flashrec, the first backup of my recovery failed. tried again it reported success. closed app opened and it gave me the option to flash the cyno recovery or restor mine, i flashed the CM and when i rebooted to the recovery it would just sit there at the splash screen. i could still boot normally and into the fastboot menu... I then went and downloaded the CM 5.08 install from a mirror.
I also tried the the newest cm v6 rc2, and update-cm-4.2.15.1-signed.zip
All stuck at splash on boot.
Fixed and working, I think it was my radio. I had a mirror post over ta the CM forums, and I was pointed to the correct radio and after flashing the radio and the g version of the recovery it came up, then flashed CM and Gapps and it worked...
I was also told to update my spl, but havn't done that part yet.
*edit* username is globeadue there, post should come up with a username search
I recently upgraded to the Evo from the Hero. Over the last few days, it seems like a trend has been developing. Folks with hw version 0003 and sw per 3.39 have had a very hard time gaining root. Vote in my pole and tell me how it went for you. If you HAVE had success, let us know what worked for you. Again, this pole is for folks w/ hardware version 0003 who purchased the phone with 3.30 installed, and hboot 2.02 s-on
Those of you that managed to get rooted and flashing, what method did you use??
I followed this guide. Make sure you have adb working and you have the files in the right folders.
http://forum.xda-developers.com/showthread.php?t=829045
tejasrichard said:
Those of you that managed to get rooted and flashing, what method did you use??
Click to expand...
Click to collapse
twin001 said:
I followed this guide. Make sure you have adb working and you have the files in the right folders.
http://forum.xda-developers.com/showthread.php?t=829045
Click to expand...
Click to collapse
pins and needles man.. did you get it rooted?
Followed same guide, I have hardware 0003, got it done. Rooted. Unrevoked forever
Sent from my PC36100 using Tapatalk
ver 003 also. rooted with warm 2.2 rls3 with netarchy
used unrevoked in the rooting for dummies thread at androidforums
Sent from my PC36100 using XDA App
nebenezer said:
pins and needles man.. did you get it rooted?
Click to expand...
Click to collapse
Not yet. It goes great up to the point where I flash PC36IMG.zip, but when that is flashing, it throws an error during the radio v2 update (fail-pu) and instead of skipping bootloader, like it says in the guide, it tries to update and throws an error there, too (fail-ic). After this, it finishes the flash. I can get to recovery, I can even flash a custom recovery, but when I try to boot, it just hangs at the white HTC splash. To get it to boot, I hafta run the ruu. S-off sticks, so unrevoked is working, but I don't have root, and I can't flash custom roms. I have checked my md5sum, adb communicates correctly. Something about the pc36img file just doesn't work with my phone. I will say, the pc36img in Dan's thread doesn't throw the errors, but I still couldn't boot afterwards. Think I'm gonna step away from rooting for a day or two and just enjoy my new phone. I'll come back at this when I'm fresh, not so frustrated.
I can confirm tejasrichard's findings. Used the same method above. It threw me the radio error when flashing PC36IMG.zip. adb could not perform the rename in step 15 after this, but did accept the recovery command. Step 16 worked (no step 17), but in Step 18, the recovery failed and froze on the white HTC splash. Manually put the Amon RA and radio updates onto the SD card and flashed that sucesfully, but still froze on the HTC Splash. Had to flash back into 3.30 ruu.
I did go back and try unrevoked3 and the process said it completed, however hboot gave an error on the last step when going into the clockwork recovery and looking for the unrevoked-forever.zip files. I did reboot it and it completed a boot into something similar to 3.30 ruu with a different background. Superuser app is present.
Confirmed no root, but still have S-OFF.
4-day old phone
Hardware: 003
Android version: 2.2
Baseband version: 2.15.00.09.01
Kernel version: 2.6.32.15-g0f673ed / [email protected]#10
Build number: 3.30.651.2 CL271968 release-keys
Software number: 3.30.651.2
PRI version: 1.77_003
I voted without reading this part. "purchased the phone with 3.30 installed"
I have 003, and am a flashaholic. But I purchased mine two days after launch.
Similar experience
Adding to the thread here. Pretty new to all this. I banged my head against the wall for hours rooting my new EVO bought just a couple days ago. (hw version 003)
Managed to get S-off using Method 3 (which I think has been edited to be the only method as it's been the most reliable) from the thread...
'[TOOL][GUIDE] HBoot 2.02 S-OFF'
Once I had S-OFF I thought I was golden. However, I could not flash any roms through recovery. Tried Fresh, Myn, Ava...kept getting errors. Always, it was back to RUU. The only thing that has worked for me thus far was using the 'Sprint Lovers' rom at this thread:
'[ROM] 11/07/10 | SPRINT LOVERS | 2.2 | 3.30.651.2 | Radio/Wimax/PRI All-In-One'
Not sure what's different about this Rom but it loads as a PC36IMG.zip file from Bootloader and not through recovery. I'm then able to boot the phone normally. Superuser, Wifi hotspot, swype, 4g, camera works fine...nice. It's basically stock Sense with rooted goodness. I actually love it and have tweaked the phone beautifully.
HOWEVER, I'm almost certain that i'm not fully rooted. (Maybe partially Nand unlocked) I have no idea. I've had to reload the ROM 3 times because I decided to go into recovery for one reason or another and gotten stuck in boot loop hell always going back to recovery. ARG!! Not sure the reason for that. I tried so many things early on that I cannot account for everything. I'm just going to roll with this ROM for now until the dust settles.
I'm following this thread closely:
'[GUIDE] HBoot 2.02 S-OFF'
Supposed to downgrade your HBoot which I think may be the whole problem. We'll see. I don't have the energy to start from scratch again. I'm actually quite happy with Sprint Lovers.
Thanks for the info! I'll try that ROM soon as I can and see if it works for me.
Good evening viewers, I'm an amateur, but experienced android rooter and I've accidentally worked myself into a tight spot with this dag-blasted MT3G. I was rooting for a friend, thinking it would be simple (like my HTC Hero) and then about halfway through the process, somehow I ended up flashing a different Sappimg and now it's stuck and unusable. It's a T-Mobile MyTouch, with the 3.5mm jack, and I ONLY have access to HBOOT and fastboot. somehow, the recovery has disappeared. it will not boot up into the phone's software at all. I can't seem to find the correct SAPPIMG file for it, and I've been looking extensively. I'll post the info for the phone below.
SAPPHIRE PVT 32A SHIP S-ON G
HBOOT 1.33.0013 (SAPP31000)
CPLD-13
RADIO 6.35.10.18
and after running the getvar command as the expert suggested, my version is this:
2.10.531.4
My CID is T-MOB10
any assistance would be appreciated.
Ok... here it goes.
Download these to begin with while you READ.
http://rapidshare.com/files/450996411/special_sappimg.zip
http://rapidshare.com/files/436753940/2.53.707.2_-_sappimg.zip
https://rapidshare.com/files/454052569/2.10.531.4.zip
IT IS IMPORTANT THAT YOU READ EVERYTHING I WRITE.
The problem is that the device has conflicting spl and radio combo. The spl has an idea of where the radio should be and how big ect. When they are not matching the flash of a new radio will most likely fail.
To fix this problem, we need to flash a spl compatible with the 6.35 radio.
But the problem lies in the following. All the RUU/sappimg with a spl compatible with the 6.35 has a higher version than yours(starts with 3 something). If we update the version, we cannot flash the desired sappimg which follows. The goldcard will only update up in verion nr, NOT down.
Here comes the trick: We don't let it update the version nr :0)
The special sappimg.zip is part of a 2 step update from HTC. The first part (which i have given you) will update spl, radio and boot partitions only and then restart. It will not touch the version nr until the second part is applied. Well.. we don't need the second part, because by now we have matching spl/radio combo.
Once the spl is updated and the system restarted, we can now flash any ruu we want using the goldcard. We could flash the sappimg.zip with a eng spl inbuilt like the 2.53.707.2 sappimg. Or, just flash stock MT3G 32A 3.5 MM rom.
The steps to follow:
1) Read and understand the above.
2) Rename special_sappimg.zip to sappimg.zip
3) Make sure that you have a working goldcard and flash the sappimg.zip
The device should reboot by it's self. If you get any error saying model id is no correct, you have a faulty goldcard. Also, please verify that the spl has changed to 1.76.xxxx. (flash by holding volume decrease (-) together with power and wait for the hboot to automatically pick up the file)
4) Once the device has rebooted, you should rename the 2.53.707.2_-_sappimg.zip to sappimg.zip and flash it using the goldcard. This image should give you an eng spl. If you device will not accept it/or you wish to have stock image, then rename the stock sappimg(2.10.531.4) to sappimg.zip and flash it the same way as the special sappimg.
5) If you indeed get the eng spl, then you have full control and we can do almost anything we want. Just post here and we can take it from there. The eng spl has the following nr: 1.33.2010.
If you flashed the stock sappimg, then you only need to root and flash custom recovery and you should almost be there... also here post the progress and we will take it from there.
Hope that you will succeed... Good luck :0)
I wish I could tell you that this worked, but it hasn't. I'm only on the first step, because it flashes the bootloader ok, but then hands at the very end of flashing the radio update. No idea why.
Quick update: It actually did flash the bootloader, so I'm on the SPL you suggested, but the radio is still 6.35 and S-On is still there. I'm attempting to flash the second image now, it's been 4 minutes and it's still unzipping system. It might be low battery or something, so I'll charge it tonight and attack it in the morning. Just in case, do you want me to retry flashing the first sappimg, since it hung while installing the radio and eventually shut down?
gundamwfan said:
since it hung while installing the radio and eventually shut down?
Click to expand...
Click to collapse
Thats what we WANT.
I quote: "When they are not matching, the flash of a new radio will most likely fail."
We are only interested in the spl/bootloader. The spl and radio should match by now (spl 1.76 and radio .6.35) .. that's all... and the main version should not had changed. So, it's all as we want, and it SHOULD restart as i stated earlier :0)
Okay. Well, it installed the bootloader as I said, but didn't finish the rest of the process. So I'm trying the second sappimg now, and it's been 2 minutes and it's still unzipping the first part, but the progress bar isn't moving. I'll keep you updated.
Still no luck Mumilover, it just hangs at unzipping the SYSTEM.
have you tried the stock image ?
I have, and it too hangs while updating the radio. I don't know what it is, but that's the same thing that happened with the first sappimg like I told you, installs the bootloader just fine, then hangs at the radio.
what is your fastboot info now?
The same thing it was before, it hasn't changed. And S is still on.
I have this exact same problem, to the T. Please let me know if you can figure out anything else because i'm at a loss.
You are not reading what i write.
It's imperative that the spl CHANGE before you can do ****....
I think the better question is how at this point tho..plus, how did you make that special sappimg.zip file? Can we make a custom .zip to install an older spl version? There has to be a way to get past this. I would take a working anything if I could at this point :/
veritas17 said:
I think the better question is how at this point tho..plus, how did you make that special sappimg.zip file? Can we make a custom .zip to install an older spl version? There has to be a way to get past this. I would take a working anything if I could at this point :/
Click to expand...
Click to collapse
Get a job at htc and leak the keys to us
Try this file instead of the special sappimg... remember to rename it to sappimg.zip :0)
https://rapidshare.com/files/3671633756/3.05.421.3_1.zip
Also, try this file if the above did not work:
https://rapidshare.com/files/531578080/Rogers_3.05.631.7_pt1.zip
The only way you can continue, is when your spl change to 1.76.00XX, where you XX can be 08,09,10 or what ever...
Hey, mumilover, I really appreciate what you've done so far, but I must tell you I've read everything. Your tips, so far, show promise. I've yet to try the last two files, so I'll try those now. But the thing is, when I flashed the first file in the process to get the proper HBOOT (1.76) that worked, but the second image would hang at the unzip, and the third is what changed my bootloader back to 1.33. For now, I will try the two images you've just posted.
UPDATE: the first image you posted above DID flash a new radio, but when it got to the section where it flashes the boot, it read "Fail - iE" and explained it as an image error fail. Could the zip have possibly been corrupted? At least the radio has been changed.
sigh...
As I was typing this, I rebooted and saw that the radio had indeed not changed, even though the flasher said it had been updated. Guess it didn't finalize.
Nope, same thing for both, though hopefully this assists in helping diagnose the problem. The second image you posted, also gets to the part where it flashes the bootloader, then gives me the generic Image Error Fail again and doesn't flash the bootloader. Oddly enough it did take me from 1.76.0008 all the way up to .0010 with those two flashes. No idea what that means at all, or if any revision of the 1.76 is preferred to the .0008 revision. Let me know, I'm waiting here on your advice.
That's funny. You should not be able to update the radio if the spl is mismatched....
Well... now that you have a new radio, try the special image again. The good thing with that special image is, that it will flash the spl FIRST, then the radio. Giv it a try... This approach has WORKED before... on multiple devices... When i can find the posts, i'll link to them