camera and panel button?? - XPERIA X2 General

helo everyone!
i just installed new r3 soft (form this forum) and i just left windows on my phone, nothing else... but now my cammera button doesn't work.. what should i do?

I think you just have to (re)install the cab for the camera. It might work

i just try that and it didn't work... anyone have another idea? is it possible to do something in registry to solve that problem?

Ok check the Camera Software with the SE Media Panel !
Work the Volume Control with the side buttons ?
normaly work this button on this Firmware...
is this the original SE Firmware ?

i wouldn't like to install any panel, but if that's last solution i'll put it.. wher can i get that SE media panel??
volume side buttons works just fine..
frimware is ra3, download them here...

this is in the Offical Firmware integrated...
press once the button panel and go to Media and than Pictures.
on the top of this display is a Camera Button
Works the Software, is your button faulty.

Related

OK and WIN button do not work

My OK and WIN button launch nothing anymore.
I have a TyTN and the OK and WIN button on the front side and on the external keyboard are like inactive.
How can I restore their default behavior ? where is it located in the registry ?
chris247 said:
My OK and WIN button launch nothing anymore.
I have a TyTN and the OK and WIN button on the front side and on the external keyboard are like inactive.
How can I restore their default behavior ? where is it located in the registry ?
Click to expand...
Click to collapse
HAve you installed AEButtonPlus by any chance?
Yes, I install AEbutton. Is that the reason ?
I am going to uninstall it to try if I will have my OK and WIN button back.
I installed AEbutton for the copy/paste possibility that you can assign to a button (very useful), I will miss that, but I miss my 2 buttons even more.
I uninstalled AEButton, and made soft reset.
The OK and WIN buttons are still not working :-(
I have just installed ButtonMapper instead of AEButton, I now have the OK button working again !!
But the WIN button is still not working.
Anyone knows how I could get my WIN button working again ?
My OK button is fine, but my WIN button works intermittently. Sometimes it takes three or four presses to register and bring down the Start menu. In contrast, the WIN/OK combined button under the scroll wheel always works without fail. Annoying!
chris247 said:
I have just installed ButtonMapper instead of AEButton, I now have the OK button working again !!
But the WIN button is still not working.
Anyone knows how I could get my WIN button working again ?
Click to expand...
Click to collapse
TBH, I'd uninstall button mapper, then run something like SKTools to clear all errant shortcuts and and notification queue entries. Then see where you go from there. Failing that, I'd recommend a hard reset.
bydandie, good idea I will have a look at sktools.
Do you know how does button handling work under the hood ?
what process is launched when I press a button ?
Good question....
I'm thinking a way to change my hard button links without installing a 3rd party software.
Is it possible modifying Registry?
Any other idea?
chris247 said:
bydandie, good idea I will have a look at sktools.
Do you know how does button handling work under the hood ?
what process is launched when I press a button ?
Click to expand...
Click to collapse
No, but I do know that in the past when I tried AEButtonplus, I got the same issues as you, but with an uninstall it cured it. It may be worth reinstalling AEButtonplus and then ensure within the app the the Win and OK buttons have nothing assigned to them.
I'm not sure what it calls, ,the codes look different from what is used by things such as the Soft-Key mapper
JmJ17 said:
Good question....
I'm thinking a way to change my hard button links without installing a 3rd party software.
Is it possible modifying Registry?
Any other idea?
Click to expand...
Click to collapse
Normally the hard buttons can be found under HKLM/Software/Microsoft/Shell/Keys
There you will find a series of subkeys beginning with 40C
Each subkey correspond to a hard button. For instance on my ppc 40C1 is the calendar hard button. So try to find the subkeys related to Ok and Win buttons and change the default value by the path of the app you want to launch. By default, the hard buttons applications links can be found under
/Windows/AppButtons
Cheers,
.Fred
ps.: I don't have an OK and WIN buttons on my ppc, so maybe its different for these two...
Thanks for the information dotFred, I have had a look on the registry and in the windows folder.
You are right the linking between the application and the hard button is made here, but only for the configurable buttons that you can configure in WM5 settings/button. Unfortunately the TyTN's OK and WIN button on the front and on the side of the PocketPC are not included :-(
I'd also like a way to configure the function of the start button, and the side OK/start button. I have installed Smallmenu and would like those buttons to open it instead of opening the standard start menu.
Any ideas?
I noticed on my 8525 that when i put some programs onto my memory card it deactivated these two buttons as well. You might try uninstalling some recent programs. (the program that caused problems with me was an expired trial version of WA2 that i moved onto my card.)

I don't see "see three options on screen"

After I have updated my device "XDA III" with "HELMI_BA_WM6_R0_" and after Hardreset, I see only 4 strips, I do all as in the description "HTC_Blueangel_WM6_Wizzard Upgrade 4", but I cannot start that menu where it is necessary to put ticks. Now on the screen of device only 4 strips. Help me please.
Three Options
I hoep that you have used the right ROM (Blue Angel)
you need to press Record audio and camera buttons to left of screen and hold then you use the options
no
yes
yes
press the mail button and that is it
try this link
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home
I know it is for WM5 but the process is the same
Thanks for a prompt reply. But I on the device do not have Kamera button (device without kamera), therefore I tried right after hardreset to press and hold buttons of record and mediaplayer, but it too does not help, i see only 4 strips and on the right of display 44 is written R 1.10.00
So what can i do yet ?
P.S. sorry for my not good English
update radio rom !
you can find a new version in the wiki.
than it should work.
also you have not Camera button but you have Windows Media Button instead, then pres WM and Record buttons together before the versions of rom and radio show up
Great THX to ALL !!! The problem has been solved!!!. For the beginning has really updated RADIO-VERSION up to version 1.15... After that has established still time UPDATE and after pressing buttons WM and Record all has worked, so great THX.

HTC volume control & large title bar incompatible?

Hi,
I have a strange problem among the applications named in the subject. I love the volume control which I found in Itjes blackstone application thread. As soon as I install the large title bar application, I can´t set the volume via the volume up/down buttons anymore but with my fingers on the screen. I´m usin the standard german rom with darans TF3D application. Do you have a solution for me? I saw roms where both aplications work in harmony.
I have the same problem. I think it's related with TF3D. it work's in every other panel but on TF3D the volume keys are used to navigate
Seems ok for me.
I found the bug, as soon as I install VAlert or Resco Contact Manager this happens.
I uninstalled VAlert and unckecked the option in Resco CM to usw my buttons et voila, no problems anymore.
I have the problem with the volume control that after i used it, every screen rotate sends me to the home screen and the application i'm currently running into the background, very annoying, it worked fine with the old ROM.

how to get code for hardware keys ?

pliis , help me finding camera hardware button key code
(for my Samsung OMNIA II ) .
i try this with "DELTA LOCK" but pressing CAMERA button runs CAMERA APP..
i cannot find download link for "testkeys.exe" - maybe this help me..
i need this for cameratimer app.
thanks
thanks
You should be able to associate apps to buttons in the Windows Mobile settings.
this doesnt help for me....
i need numerical code for camera button...
for this app :
http://www.coolsmartphone.com/news3617.html
Try this mate.
I used it when I where developing for Sable. Hope this will work for Omnia too.
Ok... You could use an emulator (like pocket nester) and check the key code in the key mapper options.
to JACKOS....
this is the same as DELTALOCK - cannot view CAMERA button.. - ohers buttons without problems.. but CAMERA runs CAMERA app ...
POCKET NESS - same problem, all buttons o.k., but CAMERA and SLEEP run app....
:-(((
no way ???
you can try with AEBPLUS.My htc s710's camera hardware button is 00E9.

[Q] Remap camera button

Hi everybody,
I've been digging into a lot of forums without clear answers and you may be of some help:
I've changed the digitizer of my Omnia I8000 running under W6.5 and everything was ok except that I damaged the ribbon cable for the keypad and the camera buttons. I was so close...
Now I do not have access to the camera buttons and can't enjoy my new scratchfree screen with homemade photos...
I've ordered a new one but in case i can't fix it I was wandering if there's a way to remap this button to the cube button for exemple.
Hbutton or aeplus is of no use, these hardware buttons are low level linked to the cam app.
I can launch cam application but when in camera mode i have no way to take the picture. Remapping the cube button to the cam app works by launching it but when in cam mode, the cube button don't trigger the picture.
I did'nt find where the low level hardware keys are link to the cam app.
Even if it means cooking a special rom i don't care, I can live without the cube button.
Any help appreciated
Eric
hey dude!
we have the same problem. did you already find ways on how to remap your camera key to hbutton?
i am also searching now on how to remap it. i will let you know if i found some.
danph_07 said:
hey dude!
we have the same problem. did you already find ways on how to remap your camera key to hbutton?
i am also searching now on how to remap it. i will let you know if i found some.
Click to expand...
Click to collapse
I think you should try an app called AE Button Plus v2.6.6.1.
sorry. I could not attach the file so please try google it.

Resources