Related
Like most of you out there. I was very frustrate with the available version of Microsoft Voice Command because it doesn't seem to work properly on the Diamond. I played around with it for a few days and found a mod that allow it to work, but it doesn't seem to work for other who read my post. So these last few day I been doing hunting only. I happen to find a very new release of Microsoft Voice Command v1.6 Build 1.6.9213 that was design to work with Window mobile 6.1.
Here is the link.
http://www.ipmart-forum.com/showthread.php?t=274611
This version of Voice Command will install properly on your Diamond and save you all the trouble of Modding.
Also, for those of you who criticize me so much, I'm not doing this for money or anything, just try to help the community.
Love more, don't hate
Well, now you can all finally throw away that junk Cyperon Speech Commander and have a good night of sleep.
Also, I check Dutty ROM 1.8. He seem to have version 1.6.9965 which seem to be very new. I been trying to hunt this version down but with no luck. Hopefully Dutty will unlock his ROM someday so I can extract it for everyone.
is this the one currently enabled on Dutty's Rom v1.8?
kemathon said:
Well, well. Isn't it a lucky day for you folks out there. I finally got XDA MSVC_US_PPC 1.6.19209 (this is the latest version of Microsoft Voice Command) to work on HTC touch diamond!!!!
First of all how and where to get it (search engine...hint torrent)
Installation instruction.
1. After you got the Cab file, move it to your phone and run it from there
2. Installation is going to be complete with an error...
3. Press ok and close installation window.
4. use File Explorer to navigate to the Programfile/VoiceCommand
5. Copy the file called "voicecmd.exe" (hint: the one with the icon)
6. Navigate to MyDevice/Window/Startmenu/Program
7. Then tab and hold the sreen and paste as short cut there. Now you would be able to run MSVC 1.6 from the programs menu
8. You can now go to setting, and change the press long call button to use "voicecmd"
9. And voila, there you have it. Perfectly working MSVC
Here are the additional steps to make it work with your bluetooth headset.( also the credit in the bluetooth session belong to tommatt who make the first discovery of the solution)
- set HKLM\Software\Microsoft\Bluetooth\AudioGateWay -> SupportCLI to 1
- set HKLM\Software\OEM\VoiceCommand -> VoiceCmdEnable to 1
- Made a Softreset
Well, now you can all finally throw away that junk Cyperon Speech Commander and have a good night of sleep.
Click to expand...
Click to collapse
What is the exact error message you get under the installation??
I'm planing to modify the cab to work "out of the box" for the Diamond, but I don't have my phone here so I cant test the cab myself.
Duttys
I'm using the one on Duttys ROM and its pretty wicked
I expected it to be a bit naf but its just very good and practical too.
sdc77 said:
I'm using the one on Duttys ROM and its pretty wicked
I expected it to be a bit naf but its just very good and practical too.
Click to expand...
Click to collapse
silly question but what does it do, the voice command that is?
allsorts
It allows you to call any contact by speaking into a headset or at the phone
f ex "call david smith" and it will ask you if you want to call his landline or mobile and you can confirm.
it allows you to launch any program..
f ex "open tomtom navigator" starts tomtom ...
allows you to play music.. list appointments..etc etc and all this with no 'voice training'
This page shows you what can be done with it
http://www.microsoft.com/windowsmobile/en-us/help/more/voice-command-tutorials.mspx
How do I enable a Long press on my handfree cable? Something like Ceb commander, it will activate the program when I had a long press on the handfree set
Hi. I've downloded the voice command application. But i'm having problems assigning a button for it. When i go into <settings, buttons> there arn't any buttons there for me to assign voicecmd to. Where do i get the buttons in the list from?
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
sushilange said:
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
Click to expand...
Click to collapse
Same here.
excuse me~~~
where can i download the cab??
holyfox said:
excuse me~~~
where can i download the cab??
Click to expand...
Click to collapse
39$
http://www.microsoft.com/products/i...7701-4eaf-8435-1cef3ec9f7ff&type=ovr#HowToBuy
electrocat said:
39$
http://www.microsoft.com/products/i...7701-4eaf-8435-1cef3ec9f7ff&type=ovr#HowToBuy
Click to expand...
Click to collapse
I beleive VC 1.6 comes on all WM6.1 ROMs now, if not HTC has been providing them for me in their ROMs. They have always worked well even over Bluetooh except on TI OMAPI devices.
This maybe helpful though for people with WM5 and older.
Jcostanza4
Wow, that is great news!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I've got it working and it works pretty good!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Also, you are a hero with interpunction!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I mean, one exclamation mark wouldn't have done it!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Awesome!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
The Voice Command is assigned to the "Hold" button... which is the "Hold" button anyway?
I have tried to press every button, but nothing happens...
Voice commander didn't work for me. When installation starts i get an error and installation does not create Programfile/VoiceCommand. May be my ROM is the problem?
Thanks
ROM 1.93.405.1WWE HTC Diamond
This is so crap. First I installed ms voice command and of course it wasnt good for me because names are in romanian and it only recognizez english names.
I modified something and now i cant get the original voice dialler to work with my bluetooth
My voice command works just fine with my Jawbone and Diamond CDMA
German Version
Hi.
I have installed the cab without any errors and it works fine. But it will be better for me to have a german version. It´s not so easy to pronounce the german last names in english. It would be nice, if someone could tell me, where to get a german version.
Thanks
madmax07
sushilange said:
ehm.... MS Voice Command is working on my Diamond since two month! So, where is the news?
Click to expand...
Click to collapse
He said this is better. Didn't say the current one doesn't work.
It seems there is no voice dialer in the VF branded TP2.
Anywhere I can get a cab? Was so used to it in the TP & TyTn & TyTn II before it.
Thanks
me too my friend, I want to have it
ANyone can HELPPPP
hello!
I just installed the Cyberon Voice Dialer and it worked great!
If you want it, just go here:
Link removed...this is not free software
Yes it does!! Thanks!!
Wow! Thanks. It works.
Thanks Mrs D! Works awesomely well, although I wish there was a way for it to not repeat the voice tag after you have said it, but to just run the program/dial the contact straight away.
I'd like that also!
pretty annoying beeing somewhere and people listening...
anyway I assigned to Long_Send and works great!
Thanks, will download/try and feedback
It's works!
This works great. The voicedailer from the 'old' diamond touch pro.
fadimck said:
Thanks, will download/try and feedback
Click to expand...
Click to collapse
WOW, you're the man, really thanks
MS Voice Command
Guys,
I just came across this. I tried the Cyberon version, but i don't like its accuracy and i cant assign a key to activate it.
Cyberon Voice Commander v2.5.1 build 709141 - thread Mod Edit - Warez link removed
Previous versions of MSVC did not work on my TP2, but this one does. The install automatically assigns itself to the press(Hold) of my dial button and replaces the CommManager button assignment. Like its predecessors, it works flawlessly for me.
Microsoft Voice Command v1.6.19214 - thread Mod Edit - Warez link removed
Have fun
Can you make a voice call over Bth (by pushing the voice call button on the bth headset, of course ! ) with this version ?
How do you get MS Voice Command to work? I downloaded /installed the cabs, i see the Voice Command icon on my phone, but I dont understand how it all works. Can someone explain to me how to get this rolling ? Thanks.
How do you get MS Voice Command to work......?
It is working well on my TP2.
Install and probably best to soft reset.
Once in, go to All Settings, the VC icon is in the Personal tab.
Set the options and Notifications to what you want.
Then go to Buttons (same tab) and make sure it is assigned to the Send Key.
Done...!
To use, press (and hold) the Send (L/H bottom key) till it makes a sound, then speak, a contact, number, app to open etc.
Works really well, especially announcing appointments.
One problem is that it conflicts with SRS WOW HD - no matter really as this audio app doesn't seem to work on the TP2 anyway - it makes your device not wake up from sleep, buggered if i know why (wish it worked!)
Hope this helps - party on!
Jabberoo
works fine - thx for this cool reference!
I love VC!! Thanks for the direction on it!! awesome to have on this phone.
ps, sometimes the lady catches me by surprise and comes outta nowhere to tell me something. kinda scary!
Sorry but the voice dialer (cyberon) dont work with my JAWBONE II
Does anyone have Cyberon or Voice Commander working with the button on their bluetooth headset? Cyberon worked fine with my headset on my TyTn II but won't work with either programme on my TP2. Is there a registry tweak required to make this functional?
Barry
Flying Low said:
Does anyone have Cyberon or Voice Commander working with the button on their bluetooth headset? Cyberon worked fine with my headset on my TyTn II but won't work with either programme on my TP2. Is there a registry tweak required to make this functional?
Barry
Click to expand...
Click to collapse
It's a problem caused by the change in Bluetooth stack that HTC made with this phone, I've not seen a working fix yet, I suspect we'll see something once the cooked ROMs start appearing.
Gordon
isnt voice command supposed to announce the incoming caller's name? mine does not.
and i have the jawbone II as well. shame it does not work with this.
Why in Gods name do they remove Voice Dialing? Thats like removing sms availability. Anyway to install this back?
I agree voice dialing is a core function for all "Smart" phones, look how long iPhone users had to beg to get it, but at least they have it now. The irony is that HTC has had and included voice dialing in almost all there phones for two years or more now and this wonderful phone is missing it.
I for one really need it, not want, need it and did not realize it did not come included and from reading the forums there are no good compatible software packages that reliably work (for voice dialing over bluetooth devices).
I specifically need a.) voice dialing and b.) voice dialing over bluetooth support.
HTC has let a lot of users down here, there are a half a dozen posts in this forum already concerning the lack of voice and reliable voice dialing over bluetooth. I recommend you put in a support ticket to add this functionality to the phone, they could add it via a new ROM or software update if enough people request it!
Voice dialing
I seriously doubt that enough people will request this as most people would just get it themselves, and the one of their choice.
Free Man said:
...they could add it via a new ROM or software update if enough people request it!
Click to expand...
Click to collapse
I disagree, on their flagship phone I believe they will listen to a flood of requests for this functionality. Even Apple does that much, HTC is a far more focused company and this would not be hard to support or add.
One other problem is that there are currently no products that run properly on the HD2 from 3rd parties, at least not that I have found. That includes Microsoft's Voice Commander, which is outdated for starters.
Put in a support request folks, let's get the ball rolling. I have already done so and the local rep did say he will bring it to the table during their next conference call.
PhoTonic said:
Why in Gods name do they remove Voice Dialing? Thats like removing sms availability. Anyway to install this back?
Click to expand...
Click to collapse
I think they did remove SMS http://forum.xda-developers.com/showthread.php?t=584696
Voice Dialing on HD2 works like a charm
guys - my HD2 works with Voice Dialing perfectly!
i am using the old Cyberon software
btw - i always replaced any other with this one as it is the best
the version is 1.2
it works like charm and never fails
the only problem i have is that i had to assign a shortcut to it as the keymapping is missing (HTS ?)
i mean the phone long press key assigning
in HD2 there is no available key - any one can help on this ?
ZeevG said:
guys - my HD2 works with Voice Dialing perfectly!
i am using the old Cyberon software
btw - i always replaced any other with this one as it is the best
the version is 1.2
it works like charm and never fails
Click to expand...
Click to collapse
Can you to share link for this soft which you use?
of course - please find attached.
i got it somewhere here i think long time ago so now it comes back
anyone with solution / idea as per assigning the button to long call (green) press ? or other hardware button ?
ZeevG said:
of course - please find attached.
i got it somewhere here i think long time ago so now it comes back
anyone with solution / idea as per assigning the button to long call (green) press ? or other hardware button ?
Click to expand...
Click to collapse
Thankyou.
But I have not idea how possible to assign hardware button in HD2.
I've used someone apllication for my HTC Cruise, but I don't remember how his named and not sure that is appl will be useful for WM6.5....
ZeevG said:
anyone with solution / idea as per assigning the button to long call (green) press ?
Click to expand...
Click to collapse
Yes mate - this works with most shortcuts too!
With file explorer, go to \Windows\Start Menu\Programs and copy the voice dialer shortcut. Go back a couple of levels to the \Windows folder and paste it there. Locate the shortcut (should be at the very bottom of the file list) and rename it to long_send
That shortcut gets executed when you hold the call send button, and like I said, you can do it with most shortcuts.
Works for me
HTC's response
QUOTE=PhoTonic;5094757]Why in Gods name do they remove Voice Dialing? Thats like removing sms availability. Anyway to install this back?[/QUOTE]
Yeah,
I logged a support call with them, here's their response:
"With regards to voice recognition software, microsoft havn't updated the core program for this as is only compatible with windows mobile 6.0, until this happens there is no voice recognition software."
Feaking ridiculous, How can you have a high end phone with no voicedial features. I know that users at xda will find a way around the lack of voice speed dial, however for HTC to have left it out of the official ROM is unacceptable!
thanks pals, i found another solution - a patch as a cab that enabled the long press. now only the BT activation is left out but found a version that claims to do it...
will check
Voice Speed Dialing - final all over working solution
ok - as promissed - this is a full working solution:
works with a long press call button
works with BT (!!!)
you can even backup and restore voice tags so no need to re-record if you format etc
fully tested and i am glad as this is the most critical app i use - phone and voice dialing as i spend lots of time in the car
It doesnt work for me with my bt-headset.
I cannot even record the voice with it. When I try to, the number is being called.
Thanks a lot for posting this cab. After installing it I added some voice tags but could not get the BT headset to activate the app. I then uninstalled Microsoft Voice Commander (which has never worked for me on the HD2) and did a soft reset. Voice tags had gone so recorded new ones. This app now works with my BT headset.
ZeevG said:
ok - as promissed - this is a full working solution:
works with a long press call button
works with BT (!!!)
you can even backup and restore voice tags so no need to re-record if you format etc
fully tested and i am glad as this is the most critical app i use - phone and voice dialing as i spend lots of time in the car
Click to expand...
Click to collapse
M8!! u r a life saver!!!! Kudos 2 u!!!!
all is working fine, with the HTC BH M300.
HTC!!! see.... why didn't you folks included something like this, from the getgo!?!?
ZeevG said:
ok - as promissed - this is a full working solution:
works with a long press call button
works with BT (!!!)
you can even backup and restore voice tags so no need to re-record if you format etc
fully tested and i am glad as this is the most critical app i use - phone and voice dialing as i spend lots of time in the car
Click to expand...
Click to collapse
Work like a charm Thanks a lot!
Cool, not being near my phone at the moment...I have some quick questions:
1. Does the long press to the call button have anything assigned to it by default already?
2. Can you still use voice activated dialing through a bluetooth headset without first running Cyberon or this app?
3. Do you have to install the Cyberon app to main memory or can you install it to your SD card instead to save overhead?
4. I see there are two versions of the Cyberon app, Voice Dialer and Voice Commander...It looks like you don't have to make voice tags for commander and it controls more than just calling contacts out of the box, while voice dialer simply creates a voice tag and dials that contact...Am I right? Have you guys used both of these, which do you prefer?
5. I just want to confirm, you can use a bluetooth headset and push the voice button and speak a voice tag and that will automatically activate and call that contact correct? This is what I need while in the car, not just picking up a call via a bluetooth device!
6. Zeevg...That second cab you uploaded, CVSD...What exactly is that? Is that just a newer version of Cyber that allows you to map a long key to voice dialing functionality or do I still need to install the first cab posted here, then install that one as well? It appears that this file is a better working copy to replace the original one uploaded here. If so does it automatically map the long key to the call button or do you assign it within the Cyber interface?
Thanks!
ZeevG said:
ok - as promissed - this is a full working solution:
works with a long press call button
works with BT (!!!)
you can even backup and restore voice tags so no need to re-record if you format etc
fully tested and i am glad as this is the most critical app i use - phone and voice dialing as i spend lots of time in the car
Click to expand...
Click to collapse
It works great....
Cannot thank you enough man...
Should be sticky though i am afraid this thread will not be on for long...
look for my comments within your questions
Free Man said:
Cool, not being near my phone at the moment...I have some quick questions:
1. Does the long press to the call button have anything assigned to it by default already?
ZeevG> when you get the HD2 new there is nothing there and you can't even assign a button/app to it as it is blocked.
2. Can you still use voice activated dialing through a bluetooth headset without first running Cyberon or this app?
ZeevG> no. you must install this app first to enable voice dialing / long press / BT - no worries as you did not have anything else assigned to this button before. this can also launce apps not just dialing you can assign a voice tag to launce any app installed on your device
3. Do you have to install the Cyberon app to main memory or can you install it to your SD card instead to save overhead?
ZeevG> this version allows you to select - i installed it to Storage Card. all other versions forces installation to main memory
4. I see there are two versions of the Cyberon app, Voice Dialer and Voice Commander...It looks like you don't have to make voice tags for commander and it controls more than just calling contacts out of the box, while voice dialer simply creates a voice tag and dials that contact...Am I right? Have you guys used both of these, which do you prefer?
ZeevG> these are two different apps... i use Voice Dialing...
5. I just want to confirm, you can use a bluetooth headset and push the voice button and speak a voice tag and that will automatically activate and call that contact correct? This is what I need while in the car, not just picking up a call via a bluetooth device!
ZeevG> yes mate - this is EXACTLY what i meant. i use it for all my calls. in HD2 you can even select is the voice respond from the device will go to the BT or be sound from speaker
6. Zeevg...That second cab you uploaded, CVSD...What exactly is that? Is that just a newer version of Cyber that allows you to map a long key to voice dialing functionality or do I still need to install the first cab posted here, then install that one as well? It appears that this file is a better working copy to replace the original one uploaded here. If so does it automatically map the long key to the call button or do you assign it within the Cyber interface?
ZeevG> the seconf post CVSD... is the solved app for all so no need for anything else, just throw it all away and install this one. this is NOT the latest version it is one before latest but no real diff... other than it works for all options
Thanks!
Click to expand...
Click to collapse
ZeevG> as much as may want to the credits for this solution is not mine at all other than putting it back here. as said earlier i found it long time ago here and now i am being the "public archive" and putting it back - ENJOY !!
Hello, I would like to ask if it is possible to TP2 with HTC and WM6.5 ROM 1.86.401 somehow break in voice dialing via BT in the ear (Nokia BH-105). I've been looking everywhere on the net and forums, but I really did not find anything while I think it's pretty useful thing that works for most MT to BT, so the WM would probably also not be a problem. ... maybe ...
Thanks much
if i understand what your asking, you want a program called Voice command. This will allow you to use your BT to dial contacts & any phone # plus many other things. here is a link to the cab file thanks to "dotcompt"
http://www.sendspace.com/file/8hdfbq
Yes, you understand me well. The program is good but I could not find any commands. When I say "help" so HTC says only some commands. Do you know where I can find others? Thanks
To enable voice commands for Media Player, you must enable a setting found in Settings->Personal->Voice Command (make sure there is an X next to 'Media').
I bought Microsoft Voice Command 1.60 and I tried to install it on a HTC HD2 mobile that runs Windows Mobile 6.5.5 (cooked ROM), but I always get an error message at the end of the installation, which says:
An unrecoverable error occurred in Setup. Please reset the device and try again
On the Handandgo website is listed that HTC HD2 and Ms Voice Command 1.60 are compatible, and the technical support of Handandgo confirmed it me that once once more.
I have tried:
- at least 3 different ROMs, (Freyberry barebone, Miri, 3l5y)
- at least 2 Stock ROM (1.43 and 1.66)
The error occurs even if I install from the PC using Windows Mobile Device Center or when I install from a downloaded cab files, located on my phone SD card.
Please can anyone suggest a solution?
Thanks
It might be that this latest and previous editions of MS Voice Command are NOT compatible with HD2
Can anyone confirm?
Thanks
Saulo
Or does it need to have NetworkFrame 3.5?
If so, how do I know if I am running standard 2.0 version or latest 3.5 version?
Thanks again
Saulo
1) Have you checked that it works, i had this broblem after install on my old TD and it still worked. If i remember correctly it did not assign it to button 1 correctly either and you had to put a shortcut into the start menu then assign it to button 1.
2) I have not been able to get any version of MSVC to work on my Leo with 6.5.x, I am using Cyberon now... it is a bit of a pain having to go through all the contacts teaching it, but it works well.
Better use Cyberon Voice Command. Its
compatible,
more comfortable to use (no voice assignment necessary),
attachable to longpresssendkey even with bluetooth-headset easily (if this option is enabled, otherwise search for S64 enable send key)
and has more functions than MVC
Greets
Thanks a lot elburna
I will surely give a try to that application you mention
Now my problem is how to unistall...in fact also unistall runs in the same error message...
I dislike to have my system dirty with aborted installations and aborted removals. can you advice it?
Thank you!
Saulo
Dear elburna
Where can I download a trial or buy the latest version of cyberon voice command?
No sign of it on handango.com and pocketgear.com
On the official site
http://www.cyberon.com.tw/download.php
I just see corporate solutions...
Thank you
Saulo
Do a search for Duttys Cyberon Voice Speed Dial it is oem.... free
saulo866 said:
Dear elburna
Where can I download a trial or buy the latest version of cyberon voice command?
No sign of it on handango.com and pocketgear.com
On the official site
http://www.cyberon.com.tw/download.php
I just see corporate solutions...
Thank you
Saulo
Click to expand...
Click to collapse
This site is just right. Download the trial here
http://www.cyberon.com.tw/download.php
and if you like it you just need to use the register button on their page
dear Elburna
I have tried Cyberon and works very good (altough my english pronunciation is not good and many contacts are mistaken)
I have purchased via paypal 1 hour ago, to support them, $20...up to now I have NOT received any serial. Did you also wait a long time before receiving unlocking code?
2.
Is it possible to install another language? Say Italian? Or French?
3.
Is it possible to install Chinese Language (I am learning it)
Thanks
Saulo
saulo866 said:
dear Elburna
I have tried Cyberon and works very good (altough my english pronunciation is not good and many contacts are mistaken)
I have purchased via paypal 1 hour ago, to support them, $20...up to now I have NOT received any serial. Did you also wait a long time before receiving unlocking code?
2.
Is it possible to install another language? Say Italian? Or French?
3.
Is it possible to install Chinese Language (I am learning it)
Thanks
Saulo
Click to expand...
Click to collapse
Im not quiet sure but i think (didnt test it yet) you can install any of the trials from their website (french, italian, and so on, unfortunately no chinese only japanese ) and unlock them with your code. If you dont like it you can go back to your old version any time.
For me it took a whole day till the registration code was sent because i ordered in the afternoon hours as well (takes some time till they check their paypal-/email-account), so dont worry
I am trying Cyberon Voice Command. Sound and voice work through the bluetooth headset but I cannot get the Bluetooth Headset to start the command.
I have also tried Microsoft VC, this works ok except i do not get the tone at the beggining or the failed tone.
Anybody experianced and of these problems and any sollutions.
What the hell? I've been using MSVC on mine for ages now, even over bluetooth.
On older ROM's it didn't, but since the latest T-Mobile build's it's been fine.
I'm using Miri Rom 7.0 on 6.5.5. I've assigned the longpress send key to activate and it works without issue. Furthermore, it installs then says some sort of error occurred, but I just press okay, and the back key and it works great!!
HI Guys,
because I am total noob in MSVC, could you please answer a few questions for me? I seem to have it embedded in my Xanny 1.4 Evolution (6.5.5) rom, but I haven't got any idea how to set it up or use it...
So firstly:
Does it work like I for example say: "Call Edward" or something and it will do it? Where do I set that up? Where do I record and apply the command?
Secondly:
Does it work only on bluetooth headset, or a wired headset (or no headset at all ) can be also used?
And lastly:
Does it need to be switched on/off whenever I want to use it or is it just another ongoing service?
Thanks!
MSVC on XannyTech Evo 1.4
morningstar.fallen said:
HI Guys,
because I am total noob in MSVC, could you please answer a few questions for me? I seem to have it embedded in my Xanny 1.4 Evolution (6.5.5) rom, but I haven't got any idea how to set it up or use it...
So firstly:
Does it work like I for example say: "Call Edward" or something and it will do it? Where do I set that up? Where do I record and apply the command?
Secondly:
Does it work only on bluetooth headset, or a wired headset (or no headset at all ) can be also used?
And lastly:
Does it need to be switched on/off whenever I want to use it or is it just another ongoing service?
Thanks!
Click to expand...
Click to collapse
I've been using the same ROM and my BT headset is Jabra Extreme. It works well.
Go to [Settings][Other][Voice Command] to set the MSVC to your liking. Actually, you don't need to as the presets are working well. Only you can check whether it is enable or not.
Click on your BT headset button and say the command after the beep. Better still after the beep say "Help" and you will be guided on the capabilities.
Don't know about wired headsets because I only use it on bluetooth headset.
You must activate the bluetooth services and pair your headset first. I usually leave the bluetooth services on or you can d/l the BT toggle to save battery. Frankly speaking, I leave the BT services on and the battery saving is minimal.
Hope that helps.
Ok, so it only works through headset then. Possibly only trhrough BT one... So I can't just talk to my phone without using any headset...? I guess I can (but I'd probably end up locked in mental institute...).
Voice Command with HTC HD2
Hi Guys been followingthis thread i have installed Voice command it seems to be working with regards to telling it to call my contacts however it does not read my emails to me as it used to do on my Imate Ultimate 9502 i have double checked all the settings etc they are set as per the imate but i cannot get it to read new messages any ideas?
I always got the install error when installing MSVC.. but i just ignored it and it works anyway..
does it read new messages?
I get the same error when installing and ignore them but it refuses to read new text messages
well for those intereseted after testing and many different solutions
the vedic is that the HTSense sms message system is not registering with voice command.
command voice dial and programm access works
appointment reminders work and new incoming emails are anounced and read aloud.
the only thing that still does not work is new incoming sms's are not read aloud.