Database Users

Answering calls delay

There is a 2 sec delay between hitting the "ANSWER" key and getting/starting to send my voice to caller.
It's annoying that i have to wait about 2 seckonds till i can say HEY.
What program can i use to remove this annoying bug
or can i just use other kind of phone software?
(i used phonex and it was faster, delay was about 0,5 sec)
By default, there's a 3 sec delay between hitting the END key and dropping the call,
that can be adjusted by advanced configuration tool. set mine to 0 sec.

h2kk said:
By default, there's a 3 sec delay between hitting the END key and dropping the call,
that can be adjusted by advanced configuration tool. set mine to 0 sec.
Click to expand...
Click to collapse
Would it be possible to put up a link to advanced config tool software that you are using?
I can't seem to find the setting on v2 and v3.0+ wont work because of some .net framework problem.
Thanks

http://julien.schapman.free.fr/touchxperience/advanced-configuration-tool.php

h2kk, do you happen to have any idea whats the "keyboard layout" which is default: custom ? Is it the onscreen or hardware keyboard?

Seems like no one cares about the MOST IMPORTANT feature: PHONE
Beleive it or not, lots of people use X1 to make and receive calls,
and if that feature is buggy, then, i'd rather have that fixed, than use touch flow from htc hd.
Or is there a thread somewhere and i just don't seem to find it?

h2kk said:
Seems like no one cares about the MOST IMPORTANT feature: PHONE
Beleive it or not, lots of people use X1 to make and receive calls,
and if that feature is buggy, then, i'd rather have that fixed, than use touch flow from htc hd.
Or is there a thread somewhere and i just don't seem to find it?
Click to expand...
Click to collapse
Have you tried searching rather than expect someone to do your work for you.
Ive just typed "call delay after answer" into the search and come up with this lot.
http://www.google.com/cse?cx=000825...nswer&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
There's a lot of discussion over this on loads of different phones, some people believe it's the processor struggling, (too many progs running etc) but I'd hope not with a device this quick,
I haven't had this happen to me yet, touch wood etc...
others seem to think it's a variety of things, you could try this.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\HTC\PHONE\PhoneExtendS etting]
"EndCallTime"=dword:00000000

http://forum.xda-developers.com/showthread.php?t=258109
Fix described in the link above was for Windows Mobile 5, but hopefully it will do the trick for you. Let me know if it works.. If so, I'll use it when my phone arrives!!

fards said:
Have you tried searching rather than expect someone to do your work for you.
Ive just typed "call delay after answer" into the search and come up with this lot.
http://www.google.com/cse?cx=000825...nswer&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
There's a lot of discussion over this on loads of different phones, some people believe it's the processor struggling, (too many progs running etc) but I'd hope not with a device this quick,
I haven't had this happen to me yet, touch wood etc...
others seem to think it's a variety of things, you could try this.
[HKEY_CURRENT_USER\ControlPanel\Phone]
"CallProgressIdleTimeout"=dword:00000000
[HKEY_LOCAL_MACHINE\Software\HTC\PHONE\PhoneExtendS etting]
"EndCallTime"=dword:00000000
Click to expand...
Click to collapse
Should the "CallProgressIdleTimeout" value be predefined in the registry? Because for me it wasn't there. I created an object an set it to "0000" but it didn't help anything. I still have approximately 1,5 seconds delay after hitting the answer-button before the call gets connected.

Rahul3000 said:
http://forum.xda-developers.com/showthread.php?t=258109
Fix described in the link above was for Windows Mobile 5, but hopefully it will do the trick for you. Let me know if it works.. If so, I'll use it when my phone arrives!!
Click to expand...
Click to collapse
nah dont use that one, it's for the delay in the phone ringing, but will mess a few things up soundwise on the X1 I think.

fards
I actually searched and didn't find a solution.
Tried google again but all the results lead nowhere.
Also i have allready changed my registry (don't have the callprogressidletimeout though)
Rahul3000
This fix only makes the phone ring instantly, that's not our problem here.
I'll say it again. The reason why i started this thread is:
When i used Phonex software, then answering calls was a lot faster
I'm willing to uninstall the default dialer/phone application (still don't know how to do that)
and use phonex or any other fast piece of software. (phonex freezes my phone)

h2kk said:
fards
I actually searched and didn't find a solution.
Tried google again but all the results lead nowhere.
Also i have allready changed my registry (don't have the callprogressidletimeout though)
Rahul3000
This fix only makes the phone ring instantly, that's not our problem here.
I'll say it again. The reason why i started this thread is:
When i used Phonex software, then answering calls was a lot faster
I'm willing to uninstall the default dialer/phone application (still don't know how to do that)
and use phonex or any other fast piece of software. (phonex freezes my phone)
Click to expand...
Click to collapse
What phone skin/dialer are you using ? the stock SE one?
you can revert to the default WM one by changing this key.
hklm/security/phone/skin/enabled to 0 and reboot.
try that, if it changes things then it might be worth changing the caches as the both the manilla (tf3d) and SE dialler take up a fair bit of memory, what do you have those set at?
I'm quite interested in what's causing it, as I don't have this problem on my phone
Phonex looks quite nice,

[HELP] Cannot answer calls with Duttys R10 WM6.5 ROM and S2U2 v2.04

This appears to be a problem for some people but not others. I cannot find a definite fix on the posts I have read, hoping someone has found a working solution, so started a thread for just this issue.
I have just installed Dutty's R10 WM6.5 ROM on my Touch HD, and only have that and S2U2 version 2.04 installed on top, and whenever I get an incoming call when the screen is locked, the call comes through fine, caller ID and all but I cannot answer it. WHen I go to slide to answer, the S2U2 app and the dialers own slide screen is fighting for priority. I seem to be able to answer on occasion if I repeatedly tap the answer hardware key, but this doesn't always work.
I have tried swapping the settings around, and disabling the S2A, but then the other green and red keys appear and still cannot answer. Also tried the suggestion of adding S2U2 to the boitouch exemptions list in the registry with no success.
Anyone had the same issues and fixed or knows of a patch or workaround?

Jason1978 said:
This appears to be a problem for some people but not others. I cannot find a definite fix on the posts I have read, hoping someone has found a working solution, so started a thread for just this issue.
I have just installed Dutty's R10 WM6.5 ROM on my Touch HD, and only have that and S2U2 version 2.04 installed on top, and whenever I get an incoming call when the screen is locked, the call comes through fine, caller ID and all but I cannot answer it. WHen I go to slide to answer, the S2U2 app and the dialers own slide screen is fighting for priority. I seem to be able to answer on occasion if I repeatedly tap the answer hardware key, but this doesn't always work.
I have tried swapping the settings around, and disabling the S2A, but then the other green and red keys appear and still cannot answer. Also tried the suggestion of adding S2U2 to the boitouch exemptions list in the registry with no success.
Anyone had the same issues and fixed or knows of a patch or workaround?
Click to expand...
Click to collapse
Same here. I may have found a workaround.
Just disable Caller ID on S2U2 and let the 6.5 handle incoming calls with Caller ID.
I tested, seem to work fine for me. You should try it and feedback here.

Yes, disabling the Caller ID from within S2U" worked, fantastic!!!
Does anyone know why the Caller ID now doesn't work using Duttys R10 and S2U2? Previous ROMs (think they were all WM6.1 though) have worked..

Jason1978 said:
Yes, disabling the Caller ID from within S2U" worked, fantastic!!!
Does anyone know why the Caller ID now doesn't work using Duttys R10 and S2U2? Previous ROMs (think they were all WM6.1 though) have worked..
Click to expand...
Click to collapse
Probably just the updated WM base used. These OEM's keep moving and it's prbably hard for AC to keep up with S2U2.

glad you found a fix....
I was in a similar boat... I have a T8285 for use of 3g in US, but I cant answer incoming calls when i leave the phone with 3g on and locked when the call is received. just passes the call to be missed, all the while i keep sliding the bar to answer. the hotfix from htc made it worse... just made the dialer screen all screwy.
I posted the problem in both miri and dutty threads that are of which i use, but neither are the actual culprit.
sooo I tried S2U2 and disabled caller id, as suggested in this thread, but this didnt fix it. after searching for weeks, i've been stuck leaving my phone on edge.
sorry for the sob story. i envy that you fixed something and i haven't lol.

tonybalido said:
glad you found a fix....
I was in a similar boat... I have a T8285 for use of 3g in US, but I cant answer incoming calls when i leave the phone with 3g on and locked when the call is received. just passes the call to be missed, all the while i keep sliding the bar to answer. the hotfix from htc made it worse... just made the dialer screen all screwy.
I posted the problem in both miri and dutty threads that are of which i use, but neither are the actual culprit.
sooo I tried S2U2 and disabled caller id, as suggested in this thread, but this didnt fix it. after searching for weeks, i've been stuck leaving my phone on edge.
sorry for the sob story. i envy that you fixed something and i haven't lol.
Click to expand...
Click to collapse
A number of HTC hotfixes had similar affect with my phone, i.e. made dialer all screwed up. I generally don't use them as they get implemented into the latest roms anyhow.
Which rom are you using at present? Have you tried posting your query into the S2U2 thread. Your most likely going to get more accurate response from someone who uses that software

Fallen Spartan said:
A number of HTC hotfixes had similar affect with my phone, i.e. made dialer all screwed up. I generally don't use them as they get implemented into the latest roms anyhow.
Which rom are you using at present? Have you tried posting your query into the S2U2 thread. Your most likely going to get more accurate response from someone who uses that software
Click to expand...
Click to collapse
S2u2 is new to me, so I haven't had the chance; I'll check that dedicated thread shortly.
Currently I use miri WM 6.5 23009. I've posted in that rom development thread and read it almost thoroughly (1K+ pages!).

If you turn on "windows dialer" instead "slide to answer" everything works fine even with "caller ID-> ON".The only thing with windows dialer you can't see the call history in dialer but if you use call history button the history shows fine.
I'm using duttys6.5 r9 turbo

Solved.
Hello
With new S2U2 version 2.12 is solved. Even with htc dialer, even with Caller ID, etc.
I had the same problem with Rom 6.5. But now is ok.
Regards.
Cure.

kolobok72 said:
If you turn on "windows dialer" instead "slide to answer" everything works fine even with "caller ID-> ON".The only thing with windows dialer you can't see the call history in dialer but if you use call history button the history shows fine.
I'm using duttys6.5 r9 turbo
Click to expand...
Click to collapse
Where do you change it to "windows dialer"?

Phone dialer issue

Hi,
Device: Blackstone
Kitchen: EVK
SYS:24006
EXT: Leo 2.10
OS: Win6.5
I have been trying to cook a dialer with video calling support.
I cooked in the dialer, PhoneCanvas_3_50_36045_0.
The dialer does show 3g calling and conference.
But the issues starts once i receive a call.
If i slide to ignore the call, the dialer lags like 5 sec, before i am back to the home screen.
Then, if i turn off the screen, then call is not received. The phone does not even ring.
However once i turn on the screen, it shows a notification, that i have missed a call.
Then once again i switch off the screen, i receive call but the same thing with ignore.
If it might be of any help, i left out PhoneExt_Service.dll from cooking.
not sure, if that is what is the reason behind the problem.
Solution tried:
Hard reset after flashing
Soft reset
No application installed.
Rotastrain Rhodium dialer for all

anyone know any solution for this...

Does HD supports Video calling? i mean does it has front camera? i dont think it is an issue from the Dialer... but you can try the Stock HTC dialer from the original ROM

+ Que PPC said:
Does HD supports Video calling? i mean does it has front camera? i dont think it is an issue from the Dialer... but you can try the Stock HTC dialer from the original ROM
Click to expand...
Click to collapse
yes it does
shah1237,
I think you need Video_Telephony_2_5_35575_0 and PhoneExt_Service.dll
i have attached mine dialer pack
phonecanvas is the same version

All three packages are to go inside the EXT folder?

onesolo said:
All three packages are to go inside the EXT folder?
Click to expand...
Click to collapse
yeap.
i have all of them in mine ext folder

rambo12345 said:
yes it does
shah1237,
I think you need Video_Telephony_2_5_35575_0 and PhoneExt_Service.dll
i have attached mine dialer pack
phonecanvas is the same version
Click to expand...
Click to collapse
thanks rambo.
been busy with my exams so could not reply back earlier.
video calling works great, and i even mange to fix the caller idea issue.
but a new one has popped up...
when i dc a call, the dialer hangs/lags, like seriously it takes 5-10 sec for it go away.
however this is happening most of the time.
i fixed the registry entry to end the call after like 1 sec, coz 0sec sometimes creates problem, but of no use.
i think i am missing some packs.

anyone faced a similar issue earlier

i would really appreciate if someone can help me out with this.

[MOD] Remap off button to hangup calls too...

Hi,
It seems that the time it takes to disable the light sensor during a call is slow, and would quite like to turn off the button off the call as well, without needing to touch the screen to do so.
What do you think?
Thanks to this post: http://forum.xda-developers.com/showthread.php?t=740629
I find a way to do that
Just add this line:
Key 116 ENDCALL
and if you want to wake up device with end key too:
Key 116 ENDCALL WAKE
in file: /system/usr/keylayout/qwerty.kl
This works with mattc 1.5 builds, and other using old kernel, news kernel have this feature allready
Have a nice day!

caedanne said:
Hi,
It seems that the time it takes to disable the light sensor during a call is slow, and would quite like to turn off the button off the call as well, without needing to touch the screen to do so.
What do you think?
Thanks to this post: http://forum.xda-developers.com/showthread.php?t=740629
I find a way to do that
Just add this line:
Key 116 ENDCALL
in file: /system/usr/keylayout/qwerty.kl
Have a nice day!
Click to expand...
Click to collapse
Which file editor do you use?
Everyone I use saves the file in 0.00 bytes

It's not needed because it's already fixed in the kernel git. You need only to compile a new kernel.

arifqur said:
Which file editor do you use?
Everyone I use saves the file in 0.00 bytes
Click to expand...
Click to collapse
I use Astro

Markinus said:
It's not needed because it's already fixed in the kernel git. You need only to compile a new kernel.
Click to expand...
Click to collapse
Thanks, I did know that

caedanne said:
I use Astro
Click to expand...
Click to collapse
caedanne said:
I use Astro
Click to expand...
Click to collapse
Hey Caedanne - I attempted to use Astro to add the relevant key input to file, but - like another poster here, the file was saved at 0kb (it became a blank file).
Upon reboot - as I feared would happen - my hardware keys became non-functional.
Could you therefore please just let us know step by step how you edited the file using Astro (I used edit - open as text file - then edited it and saved it) - was there something I missed here?
If anyone else could tell me/us how to edit the file properly (either via a desktop computer or - more preferably - within the phone itself, it would be greatly appreciated).
Thank you.

Um, Maybe I'm missunderstanding something. Using Darkstone V2, all I had to do was set the end call button to also end calls in the settings. I just tested it by calling my voice mail, I hit the end call button and it will end my call. It will also lock my screen and unlock it.
Is this what you guys are trying to achieve? Or am I missing the big picture here.

darkt123 said:
Um, Maybe I'm missunderstanding something. Using Darkstone V2, all I had to do was set the end call button to also end calls in the settings. I just tested it by calling my voice mail, I hit the end call button and it will end my call. It will also lock my screen and unlock it.
Is this what you guys are trying to achieve? Or am I missing the big picture here.
Click to expand...
Click to collapse
Where in the settings?

darkt123 said:
Um, Maybe I'm missunderstanding something. Using Darkstone V2, all I had to do was set the end call button to also end calls in the settings. I just tested it by calling my voice mail, I hit the end call button and it will end my call. It will also lock my screen and unlock it.
Is this what you guys are trying to achieve? Or am I missing the big picture here.
Click to expand...
Click to collapse
Correct... is that

mrtrevelyan said:
Hey Caedanne - I attempted to use Astro to add the relevant key input to file, but - like another poster here, the file was saved at 0kb (it became a blank file).
Upon reboot - as I feared would happen - my hardware keys became non-functional.
Could you therefore please just let us know step by step how you edited the file using Astro (I used edit - open as text file - then edited it and saved it) - was there something I missed here?
If anyone else could tell me/us how to edit the file properly (either via a desktop computer or - more preferably - within the phone itself, it would be greatly appreciated).
Thank you.
Click to expand...
Click to collapse
wich build do you use?

darkt123 said:
Um, Maybe I'm missunderstanding something. Using Darkstone V2, all I had to do was set the end call button to also end calls in the settings. I just tested it by calling my voice mail, I hit the end call button and it will end my call. It will also lock my screen and unlock it.
Is this what you guys are trying to achieve? Or am I missing the big picture here.
Click to expand...
Click to collapse
On the NEXUS builds you can hang up using the off key, but not on the Sense builds.

Ehm ok... so could someone please post the original file? I can't connect to a PC the next couple of days,and my file is completely blank.
I would be very grateful if someone could post the file!
Sent from my Nexus One using XDA App

Any way to get the call button to open the Dailer, as at the moment it has been opening call log :S

dusdus said:
Ehm ok... so could someone please post the original file? I can't connect to a PC the next couple of days,and my file is completely blank.
I would be very grateful if someone could post the file!
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
Here it isFrom mattc Sense 1.5b)

darkt123 said:
Um, Maybe I'm missunderstanding something. Using Darkstone V2, all I had to do was set the end call button to also end calls in the settings. I just tested it by calling my voice mail, I hit the end call button and it will end my call. It will also lock my screen and unlock it.
Is this what you guys are trying to achieve? Or am I missing the big picture here.
Click to expand...
Click to collapse
Hiya - I'm on the same build as you but can't see where to change this setting. Any help appreciated!

caedanne said:
wich build do you use?
Click to expand...
Click to collapse
I use Mattc 1.5b (Sense) over Energy Cookie ROM 23678 Aug 18 (Radio 2.12.50.02)

arifqur said:
Here it isFrom mattc Sense 1.5b)
Click to expand...
Click to collapse
Thanks a lot it's working perfectly! You are the best!
Sent from my Nexus One using XDA App

mrtrevelyan said:
I use Mattc 1.5b (Sense) over Energy Cookie ROM 23678 Aug 18 (Radio 2.12.50.02)
Click to expand...
Click to collapse
You need to edit file, with astro... using your desktop to do it, its not too simple :|, so try find in that directory for qwerty or other file containing keys assigned...
see the thread I mention in first post, or simple wait for a new kernel...

Hi!
For not answer with fisycal key when incoming call, but answer only with the touch screen how can we do?
What can we map?
Thx!
Sent from my HTC Desire using XDA App

raffozz said:
Hi!
For not answer with fisycal key when incoming call, but answer only with the touch screen how can we do?
What can we map?
Thx!
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
I think you only need to touch screen " End Call"

[Q] Anyway to make the end button/lock button actually end a call?

I don't know if anyone else has this issue, but when I ring someone and I press the end key, it just turns the screen off and locks the phone with the phone call still going on in the back ground.
Is there anyway to make this button actually end the call?
BTW thanks to all the chefs for making android possible on the HTC HD2

wii60own said:
I don't know if anyone else has this issue, but when I ring someone and I press the end key, it just turns the screen off and locks the phone with the phone call still going on in the back ground.
Is there anyway to make this button actually end the call?
BTW thanks to all the chefs for making android possible on the HTC HD2
Click to expand...
Click to collapse
Settings->Accessibility->Power button ends call
Hope this helps.

OMG I feel so stupid hahaha, its my first time using android so I am still to get used to the features
thanks very much for your fast reply it worked a treat

i don't have that feature in my accessibility. wt do i do?? (using mattc build)

godlyitem said:
i don't have that feature in my accessibility. wt do i do?? (using mattc build)
Click to expand...
Click to collapse
i think he is joking this option will be in the next kernal

In sense builds there is no this option.I think because htc desire,doesnot have endkey button.But if you use latest kernel compiled by michyprima http://forum.xda-developers.com/showthread.php?t=756513 the endkey works without the need to set something in settings.

Alternatively, the following thread has the answer:
http://forum.xda-developers.com/showthread.php?t=759267
Sent from my HTC Desire using XDA App