I finally decided to mess around with my HD2 today, and installed this.
http://forum.xda-developers.com/showthread.php?t=664594
Now I have NO icons on my task bar, my phone is slow as all hell, and I can't even reach the start menu or file explorer.
How do I uninstall this / get my phone back to working?
EDIT: Nevermind. Found the uninstall link in the Settings.
Would love for this to have worked though, looked like a very sexy set of icons.
Can you stil get to the settings tab in sense? If so, look for the "application" section, in there is a backdoor link to the "uninstall programs" function.
Yeah, that worked. Thanks.
Shushunmire said:
Yeah, that worked. Thanks.
Click to expand...
Click to collapse
you bet I discovered it in the same moment of panic you just went through lol
sirphunkee said:
you bet I discovered it in the same moment of panic you just went through lol
Click to expand...
Click to collapse
Fun, wasn't it?
I think I'll stick to my stock icons and ROM now... >_>
Shushunmire said:
Fun, wasn't it?
I think I'll stick to my stock icons and ROM now... >_>
Click to expand...
Click to collapse
Which stock ROM are you running? If you're trying to get dafunk's B&W taskbar icons to work I can give you a hand, I had them running fine on my stock ROM prior to the set I have now.
ROM Version is 2.10.531.1 (82976) WWE
Shushunmire said:
ROM Version is 2.10.531.1 (82976) WWE
Click to expand...
Click to collapse
Yes, that's the same one I've been running. I'll look when I get home from work and see exactly which cabs/steps I used. Which one of the cabs there did you try when it acted up like that?
The 6.5, not the 6.5.x. Because my phone has the start icon in the upper left hand. I used the sdkcert.cab first like recommended.
sdkcert.cab
dafunk Brians BW 6.5.cab
Are the cabs I used
Shushunmire said:
The 6.5, not the 6.5.x. Because my phone has the start icon in the upper left hand. I used the sdkcert.cab first like recommended.
sdkcert.cab
dafunk Brians BW 6.5.cab
Are the cabs I used
Click to expand...
Click to collapse
I read somewhere you have to install the sdkcerts then restart...then install the taksbar cab then restart again. I couldnt get any to work until i got diniks anastasia and that worked but i installed the sdkcertsnew2015.cab (New) and that made it work.
Here is the link
http://forum.xda-developers.com/showthread.php?t=679518
I am using this without any issues.
IS THERE A WAY TO HAVE BOTH THE BATTERY ICON AND CLOCK ICON IN THE TASKBAR WITHOUT USING BATTCLOCK. I KNOW HOW TO GO IN THE SETTINGS AND SWITCH THE BATTERY TO THE CLOCK BUT I AM BEING SPOILED AND WOULD LIKE BOTH!
Shushunmire said:
The 6.5, not the 6.5.x. Because my phone has the start icon in the upper left hand. I used the sdkcert.cab first like recommended.
sdkcert.cab
dafunk Brians BW 6.5.cab
Are the cabs I used
Click to expand...
Click to collapse
Shushunmire, I think I spoke too soon...it looks like I had that taskbar running on my TP2, but not my HD2, and after trying it again I remember I ran into the same issues you did
It seems that there's not a version of the B&W taskbar (yet!) that works with the WM/Sense builds that are in the HD2, at least not the tmo model anyway. However, dafunk was able to get his NGTV version (W&B icons, exact opposite of the one you first tried) to work on the tmo HD2 with a little (ok a lot) of tweaking...I'll check with him and see if he was ever able to work the same magic in the original B&W one.
Ahhhh, that sucks. They're some great looking icons. Thanks in advance for checking with him.
Shushunmire said:
Ahhhh, that sucks. They're some great looking icons. Thanks in advance for checking with him.
Click to expand...
Click to collapse
You should really give diniks taskbar a shot!
Shushunmire said:
Ahhhh, that sucks. They're some great looking icons. Thanks in advance for checking with him.
Click to expand...
Click to collapse
I found this one, you can give it a shot in the meantime:
http://forum.xda-developers.com/showthread.php?t=602295
Related
Well, now that I have my rounded bars, nothing much has changed for me. So I decided to try and start a 'before and after' thread, instead of the typical 'post your today screen' stuff. Heres mine (spot the difference)
hey vukile... u know, this is really innovative idea here's mine....
dont know how to insert images in message so adding as attachments.. but u can make out the differences
Halp me. I whont today as like in imaje
.Whot programms I must have?)
I am positing my wm5 luk before updating to wm6 ..nd can sumone tel me differnce b/w wm5 nd wm6 ...I only knw one diff. about today screen
navjot2785 said:
I am positing my wm5 luk before updating to wm6 ..nd can sumone tel me differnce b/w wm5 nd wm6 ...I only knw one diff. about today screen
Click to expand...
Click to collapse
navjot2785, check this link for a tabular comparison between WM5 & WM6.
grd16 said:
Halp me. I whont today as like in imaje. Whot programms I must have?)
Click to expand...
Click to collapse
grd16, ababrekar has posted the details on this thread.
To get screen like this u nead wisbar advance 3 nd home plugin nd also rock star theme of wisbar advance 3
Personalised version
Personalised even more than previous post. Boy!! I'm in love with this theme. Here's mine yet again now with
1. HTC Plus Plugin
2. HTC Today Plugin
3. SPB Pocket Plus 4 (with iPhone icons)
4. Windows Aurora theme
5. UltimateLaunch
6. DciNoBar
The bottom glass bar is built in wallpaper and the HTC logo image is bootsplash, flashed through FlashBootSplash from Vukile for Gene found here http://forum.xda-developers.com/showpost.php?p=1729940&postcount=1
ababrekar said:
Personalised even more than previous post. Boy!! I'm in love with this theme.
Click to expand...
Click to collapse
one *hot* looking Gene you got there, way to go man
now this inspires me to do something with my default home.
mobix said:
one *hot* looking Gene you got there, way to go man
now this inspires me to do something with my default home.
Click to expand...
Click to collapse
wish next rom update from mun_rus or other dev will have these files built in to save storage space
here is my current today screen, though nothing fancy a simple, clean look, using:
1. SPB Pocket Plus 4
2. rlToday
3. Udk Theme
4. DciNoBar
mobix said:
here is my current today screen, though nothing fancy a simple, clean look, using:
1. SPB Pocket Plus 4
2. rlToday
3. Udk Theme
4. DciNoBar
Click to expand...
Click to collapse
thats nice mobix one suggestion, switch off the grid lines and it'll look more cleaner
ababrekar said:
thats nice mobix one suggestion, switch off the grid lines and it'll look more cleaner
Click to expand...
Click to collapse
ameet .. how do u hide the grid lines ? I couldn't find any options for that !
mobix said:
ameet .. how do u hide the grid lines ? I couldn't find any options for that !
Click to expand...
Click to collapse
even i'm not aware brother... it was just my suggestion
Still a minimalist.
Vukile said:
Still a minimalist.
Click to expand...
Click to collapse
really nice Vukile
wm6
i downloaded wm6 ....but i found that its not included the messenger...so guys can any one help me
abouud said:
i downloaded wm6 ....but i found that its not included the messenger...so guys can any one help me
Click to expand...
Click to collapse
abouud .. check this link .. next time use forum's search function first before asking questions.
mobix...thanx alot...
Vukile said:
Still a minimalist.
Click to expand...
Click to collapse
how did u get that screen done????
quite impressive must say!!!
Hello,
I have coded a replacement for dcinobar, which hides the bottom bar on the today screen, letting you use it for your today screen plugins. Unlike dcinobar, nueNoBar works with the latest wm builds (WM6.1 build 20000+). If dcinobar works on your ROM, use that instead, this is really for those new builds dcinobar's method doesn't work on.
edit: updated to 1.3, hopefully fixes more problems some people were having.
Download it from http://www.nuerom.com/BlogEngine/page/nueNoBar.aspx ...
Thanks heaps. Good to see a much-requested app updated to the latest WM version.
On a side note, how come your rad nueLED isn't on your website ?
no2chem said:
Hello,
I have coded a replacement for dcinobar, which hides the bottom bar on the today screen, letting you use it for your today screen plugins. Unlike dcinobar, nueNoBar works with the latest wm builds (WM6.1 build 20000+)
Download it from http://www.nuerom.com/BlogEngine/page/nueNoBar.aspx ...
Click to expand...
Click to collapse
it doesn't work on my niki
it give error during installation
Does not work on my Diamond with WM6.1.
I installed the CAB, rebooted and nothing happens, the softkeys are still visible.
Do I have to start a program to activate the hiding of the softkeybar ?
Hello, looks nice, but after installing it on my WM6 dvice there doen't seem to be any change after a soft reset. Is there something extra i need to do to use this?
looks like if the cab file is incomplete... not any file installed on my ppc... Wei Enterprise directory was not even created...
I got it working by manually stopping and restarting the nuenobar service.
However it also hides my phonealarm, see the screenshots (before/after) for an example.
o2cando said:
I got it working by manually stopping and restarting the nuenobar service.
However it also hides my phonealarm, see the screenshots (before/after) for an example.
Click to expand...
Click to collapse
cool it works! thanks for the tip!
and thanks no2chem for the program (because vjtoggletoday didn't work any more since i upgraded to wm6.1....)
doesn't vjtoggletodayalphaII does exactly the same thing? (also hides the systray)... that's what i'm using.
nir36 said:
doesn't vjtoggletodayalphaII does exactly the same thing? (also hides the systray)... that's what i'm using.
Click to expand...
Click to collapse
Probably yes ( if it works OK as I do hope).
vjtoggletodayalphaII and dcinobar weren't working with the latest ROM builds as stated by no2chem on the 1st post.
dcinobar works fine on WM6.1 for me.
good to see what i am missing with the new builds allthough it is not fully working yet for me. for me it is working, but only after restarting the service. after every softreset i have to restart it over again.
Nagrom Nniuq said:
dcinobar works fine on WM6.1 for me.
Click to expand...
Click to collapse
me too, i havent had any problems with dcinobar on 3.2.5 and 3.2.6, or any of JD's roms from ppcgeeks (his builds are a bit different though, i think). just started using it really, but havent had any problems.
seems weird to me that it works on some of ours but not others.
o2cando said:
Does not work on my Diamond with WM6.1.
I installed the CAB, rebooted and nothing happens, the softkeys are still visible.
Do I have to start a program to activate the hiding of the softkeybar ?
Click to expand...
Click to collapse
Same here. using udk's ver 7
ajm144k said:
me too, i havent had any problems with dcinobar on 3.2.5 and 3.2.6, or any of JD's roms from ppcgeeks (his builds are a bit different though, i think). just started using it really, but havent had any problems.
seems weird to me that it works on some of ours but not others.
Click to expand...
Click to collapse
i tried all those solutions dcinobar does not work on my device... nueNoBar does!
i dont know the differences but happy to retrieve a full today screen
(my device airis t620 with wm6.1)
o2cando said:
I got it working by manually stopping and restarting the nuenobar service.
However it also hides my phonealarm, see the screenshots (before/after) for an example.
Click to expand...
Click to collapse
okay, I will check why you need to manually start and restart the service as well as phone alarm. most likely, i moved the bar down too low, and phonealarm is checking the position of the bar.
thanks
t0k0m0k0 said:
looks like if the cab file is incomplete... not any file installed on my ppc... Wei Enterprise directory was not even created...
Click to expand...
Click to collapse
directory is not used, it just installs a single 10kb dll "nueNoBar" to your \windows dir.
Good news.
I also need to resart the service, but it's working for Tomal v8.2.
Maybe the service needs to be started with some delay in order to work.
cheers.
snachez said:
Thanks heaps. Good to see a much-requested app updated to the latest WM version.
On a side note, how come your rad nueLED isn't on your website ?
Click to expand...
Click to collapse
its being rewritten =p
ultravox said:
Good news.
I also need to resart the service, but it's working for Tomal v8.2.
Maybe the service needs to be started with some delay in order to work.
cheers.
Click to expand...
Click to collapse
yes, it will need a delay, i am adding that
Hi all,
I am trying to install a Transparent Clock but am having little luck.
Ideally I would like the transparent clock w/ weather found here http://forum.xda-developers.com/showthread.php?t=589181
I have tried that one as well as Matt's Crystal Clock. Can't get either to work - my clock does not change (even after soft reset).
I am thinking (but hoping not) it has something to do with my (and sorry I am new to this) windows version and/or manila version and/or TF3D version ???
I have WM6.1, TF3D 2.1.38420.2, and I am sad to say I don't even know how to check what manila I have...
Any help is greatly appreciated!
Thanks,
Ryan
nayr1482 said:
Hi all,
I am trying to install a Transparent Clock but am having little luck.
Ideally I would like the transparent clock w/ weather found here http://forum.xda-developers.com/showthread.php?t=589181
I have tried that one as well as Matt's Crystal Clock. Can't get either to work - my clock does not change (even after soft reset).
I am thinking (but hoping not) it has something to do with my (and sorry I am new to this) windows version and/or manila version and/or TF3D version ???
I have WM6.1, TF3D 2.1.38420.2, and I am sad to say I don't even know how to check what manila I have...
Any help is greatly appreciated!
Thanks,
Ryan
Click to expand...
Click to collapse
what rom are you using? is that a custom rom or stock rom?
stock rom (company phone so...)
I have WM6.1, TF3D 2.1.38420.2, and I am sad to say I don't even know how to check what manila I have...
Click to expand...
Click to collapse
TF3D = Manila
mhurg said:
TF3D = Manila
Click to expand...
Click to collapse
OK, well then I have manila 2.1 correct ??? And from what I have read, manila 2.1 is identifiable from having weather on the HOME screen ???
But I have never had weather on the home tab and have not had any luck getting it to work...any ideas ???
here is the EXACT weather clock that I want - is this possible ???
http://forum.xda-developers.com/showpost.php?p=4934485&postcount=297
If it is a regluar TP2 (unbranded), go to HTC.com and download the WM 6.5 ROM and install it on your phone. That gives you WM 6.5 and a Sense 2.1 (which has the weather clock).
Just make sure you backup your contacts and other info you might need, because it's like formatting a PC - everything gets deleted. It's worth it though and shouldn't take more than 15 mins to do. Then you get your weather clock AND the Crystal Clock CAB will work ;-)
mhurg said:
If it is a regluar TP2 (unbranded), go to HTC.com and download the WM 6.5 ROM and install it on your phone. That gives you WM 6.5 and a Sense 2.1 (which has the weather clock).
Just make sure you backup your contacts and other info you might need, because it's like formatting a PC - everything gets deleted. It's worth it though and shouldn't take more than 15 mins to do. Then you get your weather clock AND the Crystal Clock CAB will work ;-)
Click to expand...
Click to collapse
Hey, thanks a lot. I do not have an unbranded one however, I have Verizon. I checked HTC.com and it says wm6.5 for Verizon will be available in Dec/Jan.
I am assuming I should wait for that or would it be "safe" to download the unbranded one ???
Thanks
Ryan
nayr1482 said:
Hey, thanks a lot. I do not have an unbranded one however, I have Verizon. I checked HTC.com and it says wm6.5 for Verizon will be available in Dec/Jan.
I am assuming I should wait for that or would it be "safe" to download the unbranded one ???
Click to expand...
Click to collapse
Well you could try to find an unofficial ROM here on the forums that might work, but I must admit I haven't tried out any of them myself. Personally I'd just wait the few weeks until the official version was released, but it's up to you
Downloading an unbranded one from HTC.com won't work, however. There is more to it than that - check out the Rhodium ROM forums for more info. Good luck anyway
Install this, soft reset
How come none of the transparent clock, i've installed like 3 of them doesns't work on stock roms (sprint).
I have TF3D 2.1
Am i missing something?
kasim1 said:
How come none of the transparent clock, i've installed like 3 of them doesns't work on stock roms (sprint).
I have TF3D 2.1
Am i missing something?
Click to expand...
Click to collapse
Found it Here on PPCgeeks so many of them. Looks VERY nice !!!
Works with stock Sprint Rom.
can anyone post the manila files for this clock:
http://forum.xda-developers.com/showpost.php?p=4934485&postcount=297
???
if so i can make a cab for everyone!
nayr1482 said:
can anyone post the manila files for this clock:
http://forum.xda-developers.com/showpost.php?p=4934485&postcount=297
???
if so i can make a cab for everyone!
Click to expand...
Click to collapse
Thats not Manila, I think its SPB.
ai6908 said:
Thats not Manila, I think its SPB.
Click to expand...
Click to collapse
i would think that however it is generated, it starts with .png files doesnt it ???
i can work with the manila files or .png
Hey everyone...
I've been looking everywhere for a navipanel cab for our phone. I had one for the fuze (touch pro) but as the Touch pro 2 is a wvga I dont think it will work.
I know there are some roms out here with it kicking around but I cant find any actual install cabs. If someone has it would they mind sharing it with the community?
Thanks!
201 views and NO one has a cab...... lovely! This at least says people want it and are interested if there was one. Someone out there must have it.
Just for the record The attached picture is what I am talking about.
Aaron McCarthy said:
201 views and NO one has a cab...... lovely! This at least says people want it and are interested if there was one. Someone out there must have it.
Click to expand...
Click to collapse
PM Ark666. He seems to be the only one who had it working on TP2
I have a package I got from ark666, but have yet to get it cabbed up as Im not the strongest in that dept. It may work cabbed up, but may need to be cooked in.
I´ve cabbed it up, and i had no success, it seems it has to be cooked in.
Cheers.
well.... crap!
Aaron McCarthy said:
well.... crap!
Click to expand...
Click to collapse
If it's any consolation, he said in his thread that he will cook it into a rom for us.
Here you go...just uploaded it...its a different Navipanel then the one in your picture but same basic functions
http://www.megaupload.com/?d=WPPICF0D
if you can reskin it be my guest
nemo0405 said:
Here you go...just uploaded it...its a different Navipanel then the one in your picture but same basic functions
http://www.megaupload.com/?d=WPPICF0D
if you can reskin it be my guest
Click to expand...
Click to collapse
Odds are this is the vga version from the fuze/touch pro... correct?
ark666 said:
I´ve cabbed it up, and i had no success, it seems it has to be cooked in.
Cheers.
Click to expand...
Click to collapse
Can you post your cab so we can try it on our roms... just for fun. Wouldnt hurt right?
Aaron McCarthy said:
Odds are this is the vga version from the fuze/touch pro... correct?
Click to expand...
Click to collapse
That is the Navi Panel from the HTC Iolite.
dwizzy130
ark666 sent me his cab file.. just waiting for permission to post it if anyone else wants to give it a try. I did have the navipanel files in my phone originally but when I would bring up the program it showed no icons at all. After installing his cab the icons are there however the only icon that I am able to select is the make a call one which brings me into the 3 options dialer, favoirtes and recent calls then sub menus from there.
This was all sort of to be expected but figured I would give it a shot anyway.
Ideally, if we can get this version of the navipanel to work with other GPS units like the one from Iolite (hacked to work on the fuze/touch pro) this this ap would be perfect.
I've attached some screen shots of the program running before the cab install and then after.
is this similar to the xpheria x1 panels app ive seen floating around?
I dont believe so... I think what you are talking about is an entirely different UI. This is just a program that sort of simplies the most common functions of the phone for in the car. Gives you shortcuts right into your GPS program and shortcuts for phone calls.
Here's ark666 cab I was refering to in post #13.
http://www.4shared.com/file/193735396/baa5af9a/ARK_NAVIPANEL.html
Aaron McCarthy said:
Here's ark666 cab I was refering to in post #13.
http://www.4shared.com/file/193735396/baa5af9a/ARK_NAVIPANEL.html
Click to expand...
Click to collapse
Thanks mate. Did you ever get this to open up your nav program? I remember I had to mess with it a bit to get it to open Garmin. Had to trick it into thinking it was Co Pilot.
pablo11 said:
Thanks mate. Did you ever get this to open up your nav program? I remember I had to mess with it a bit to get it to open Garmin. Had to trick it into thinking it was Co Pilot.
Click to expand...
Click to collapse
Nope... can you share your "trick"
Aaron McCarthy said:
Nope... can you share your "trick"
Click to expand...
Click to collapse
Nevermind. I tried it and it doesnt work. The details are over in Ark's thread back when navipanel was in his roms. Shame. I'd love to see this working correctly.
One more release for today. Topic subject says it all.
Take a look at readme.txt and terms of usage.
P.S. don't install it on stock roms. It won't work. You've been warned
thanks alot buddy. highly appreciated..
after long time of intense "motivation" by me.. sorry for nagging so much...
enjoy guys and girls
ultrashot said:
One more release for today.
Click to expand...
Click to collapse
This release is not applicable for those funny guys, who continue to fix problems in WM recent builds in a weird way by means of 6.5.5 gwes.exe usage.
you just can't resist andrew....
Wow very good Ultrashot ! Nice day
I like very well the internet icon , have you please in a 256*256 pixels ?
It will be great for me!
Thanks a lot
regards,
Nixeus
Nixeus said:
Wow very good Ultrashot ! Nice day
I like very well the internet icon , have you please in a 256*256 pixels ?
It will be great for me!
Thanks a lot
regards,
Nixeus
Click to expand...
Click to collapse
No, I don't have it. Only in 90x90.
This is awesome. I'm SO glad you're still developing stuff for COM2 as well as COM3. Do you think it's possible to bring the movable shortcut feature from COM3 to COM2? It's like the one thing I really long of other than threaded email, haha.
Very nice piece of work! BTW I really like you background your using. Would you mind uploading it?
stickfigure said:
This is awesome. I'm SO glad you're still developing stuff for COM2 as well as COM3. Do you think it's possible to bring the movable shortcut feature from COM3 to COM2? It's like the one thing I really long of other than threaded email, haha.
Click to expand...
Click to collapse
I think no but I will check if it is possible.
GhostXSeries said:
Very nice piece of work! BTW I really like you background your using. Would you mind uploading it?
Click to expand...
Click to collapse
That's my ROM stuff -> no other kinds of usage.
I tried last night but only got a hardresset. I have 29022 cooked with GhostX 7.0.3 OSkitchen, then I installed NewSDKCerts.cab and do a softresset (OK) then copy shell32.exe from WM6.5.3 folder to windows folder of my HD2, then copy the .cpr files and did a softresset, but the device did not pass of second splash screen. Does it means I have WM6.5.5? Thanks in advance! and thanks for all the work you share!!!
poyensa said:
....29022 cooked with GhostX OSkitchen... Does it means I have WM6.5.5?
Click to expand...
Click to collapse
Exactly
AndrewSh said:
This release is not applicable for those funny guys, who continue to fix problems in WM recent builds in a weird way by means of 6.5.5 gwes.exe usage.
Click to expand...
Click to collapse
that's it...
Take a look at your kitchen files, and see if he has a bold font fix. It he does, then remove that, and use ultrashot fix for bold fonts...
looks great.....
thanks....
Here is my cpr mod to change the layout to 4 grid (7 in landscape).
ai6908 said:
Take a look at your kitchen files, and see if he has a bold font fix. It he does, then remove that, and use ultrashot fix for bold fonts...
Click to expand...
Click to collapse
thanks for the advice ai6, i have unchecked the keyboard font fix with the gwes.exe, then added to the kitchen the utdrv from this link (importing the cab) and i have no bold problem in the keyboard so i understand is working ok.
Then try again the Square Start Menu 6.5.3, but again didnt pass the second splash I have 29022 ... am I missing some thing else? thanks in advance
----
No I cannot get it work I have cooked GhostX rom (29022) without the fix by gwes.es so get the bold issue in keyboard (and dialpad talk button), then I installed utdrv.cab (thx ultrashot for the fix!) and the bold issue is solved, then try again the Square Start Menu 6.5.3, but again didnt pass the second splash
I will keep trying
poyensa said:
thanks for the advice ai6, i have unchecked the keyboard font fix with the gwes.exe, then added to the kitchen the utdrv from this link (importing the cab) and i have no bold problem in the keyboard so i understand is working ok.
Then try again the Square Start Menu 6.5.3, but again didnt pass the second splash I have 29022 ... am I missing some thing else? thanks in advance
----
No I cannot get it work I have cooked GhostX rom (29022) without the fix by gwes.es so get the bold issue in keyboard (and dialpad talk button), then I installed utdrv.cab (thx ultrashot for the fix!) and the bold issue is solved, then try again the Square Start Menu 6.5.3, but again didnt pass the second splash
I will keep trying
Click to expand...
Click to collapse
Yeah, the problem is the same for me... Don't know what is incompatible
Would it be ok for me to use the utdrv.cab in my future oskitchen releases? It looks much more stable than the gwes fix!
Skyguar said:
Yeah, the problem is the same for me... Don't know what is incompatible
Click to expand...
Click to collapse
I did download build 29022 from here, imported with GhostXseries OSkitchen and flashed again new rom, but same results splash screen - leo animated - welcomehead screen - stop ... keep trying tomorrow
Hmmm something to do with the OSKitchen itself then?