Hope someone can help.
As usual i am putting new cabs into my documents on the pc and syncing. But when i open file explorer, these new cabs are now showing as windows files that cannot be open as oppossed to cabs as they used to be.
I'm a bit of a noob ,so i'm not sure i have explained this very well but hopefully someone can help.
Thanks in advance.....
sounds like you are extracting the cabs to me, i just have a folder on my sd card i call general crap, and i copy all my cabs in there, go to file explorer sd card then general crap then click on what i want to install
Thanks very much for the swift response. Its very odd that this has started happening all of a sudden. Some cabs ie wallpapers, are going into my documents, but others as i said seem to now be windows files and not cabs, once they are in my documents and cannot be opened, very very frustrating !! I'll try what you said this evening and see if it works, but i cannot understand why it would all of a sudden be extracted when thats never been the case before ?
I'm sure i must have changed something, but i wish i new what
Cheers again for your help. I would be lost without this site, and my HD2 would be no-where near as much fun.
Thanks for the help, but it didn't work. Files still appear as window type files that i cannot open instead of the usual cabs. Wish i new whats changed, but unless anyone has a suggestion, i can feel a dreaded hard reset coming on !!!
Can you not just explore your device with activesync and copy the files manually, rather than using some method of synching? Or, connect as a USB drive and copy the files to your memory card. Either they're not actually cab installers, or the sync process is doing something to them.
Just tried both your suggestions, but with no luck. But thanks anyway for the reply. Wish i new what has changed but something has .
NREYNOLDS said:
Just tried both your suggestions, but with no luck. But thanks anyway for the reply. Wish i new what has changed but something has .
Click to expand...
Click to collapse
What actually happens then when you click a cab file? Do any old cab files work, or is it now all cab files that won't work?
It says " The file ????? cannot be opened. Either it is not signed with a trusted certificate, or one of its components cannot be found. If the problem persists, try reinstalling or restoring this file "
You can see before you try to open it that its not right, as i say , it appears to be a window file not a cab, once it goes on my device, though judging by the size of the file it is all there !!!
Wallpaper cabs seem to be working for some reason though.
Using your PC, browse to the folder on your phone and see what the file is called. If it doesn't look like a cab file should, then it probably won't have a .cab extension. (I only say this because the file explorer on the phone does not show file extensions. Your PC may not be set up to do so either though. The alternative is to use Total Commander or Resco to see what the file extension is.)
Can you give me a link to a cab file that doesn't work for you?
http://forum.xda-developers.com/showthread.php?t=576232
Shortcuts to start menu folders is one of the cabs. As above .
I'll have a play with the other things youv'e said.
Thanks again for you help.
NREYNOLDS said:
http://forum.xda-developers.com/showthread.php?t=576232
Shortcuts to start menu folders is one of the cabs. As above .
I'll have a play with the other things youv'e said.
Thanks again for you help.
Click to expand...
Click to collapse
Don't thank me till we've fixed it
Did you first unzip the file in that linked thread?
No, i'm putting it on unzipped as i normally do.
Looking at them on the pc, they appear as normal .
NREYNOLDS said:
No, i'm putting it on unzipped as i normally do.
Looking at them on the pc, they appear as normal .
Click to expand...
Click to collapse
Well the link you gave me is a zip file with a cab file in it, so you would need to unzip it first. Cab files are actually a format of compression, so it's likely that a cab file and a zip file would have the same icon on your PC. It's for reasons like that that I always make sure to have file extensions switched on on my PC.
Try unzipping it and copying the contents to your phone and see how you get on with that.
You are a life saver. Now I can say thank-you very much, that worked perfectly. This website is brilliant for those of you who know what your doing and for those like me who just like to play with their device and make use of the knowledge on this site.
Thanks again.
NREYNOLDS said:
You are a life saver. Now I can say thank-you very much, that worked perfectly. This website is brilliant for those of you who know what your doing and for those like me who just like to play with their device and make use of the knowledge on this site.
Thanks again.
Click to expand...
Click to collapse
You're welcome mate. Glad you got it sorted.
Related
Hi all,
Havn't posted for a while but I am still here! My exec seems to be running pretty fast now, using ozVGA
Anyways, just installed 2 patched *.exe files into windows directory (Backlight.exe.0409.mui.exe and Power.exe.0409.mui.exe) but me being stupid, I forgot to make a back up of the ORIGINAL backlight.exe and power.exe (located in the Windows DIR on the phone)...
So could somebody PLEASE upload me them two files, as I really need to restore them because using ozvga is hurting my eyes at the moment!
Thank you!
Not sure if this is what you want, since they are ROM files.
They originally had Read-Only, Hidden & System attributes set, but don't know if those will survive being compressed with WinZIP.
HTH
Exactly what i needed.. but I have no such luck of getting them onto the exec! i remove the attributes and it still doesn't let me copy!! DOH! any ideas? and thank you for such a quick reply
peteypye said:
Exactly what i needed.. but I have no such luck of getting them onto the exec! i remove the attributes and it still doesn't let me copy!! DOH! any ideas? and thank you for such a quick reply
Click to expand...
Click to collapse
Sorry, wait a minute... That's better just got my spare (hopefully working) brain cell out of cold storage. :roll:
Both files are shown as "ROM" files if I look at their properties in the \Windows\ folder using Resco Explorer, so, errr..... won't they already be there if you delete whatever you've currently replaced them with?
Unfortunately, neither ActiveSync Explore, nor the PDA's File Explorer appear to allow you to overwrite an existing system file on the PDA. Resco's Explorer does allow this, although you get a message saying that the world will probably end if you do. I just tried copying another program into Windows as Backlight.exe. Then deleted my program, and the original was available again. But as mentioned, not posible with File Explorer, nor ActiveSync Explore.
Ok, simply by deleting the two files restored the default versions and fixed my problem.
Thanks for your advice, astage.
peteypye said:
Thanks for your advice, astage.
Click to expand...
Click to collapse
Nothing to thank me for ..... since I'm just another fish out of water...
astage said:
Not sure if this is what you want, since they are ROM files.
They originally had Read-Only, Hidden & System attributes set, but don't know if those will survive being compressed with WinZIP.
HTH
Click to expand...
Click to collapse
link not working .
Lurker and 2nd time post.
Hello!
Started developing my 8525 this week.Went with the Bulletproof 1.40 oil Hard SPL, Black WM6 2.5, Sim unlocker.
Question is this:
I need help loading the BlackWM6 keyboard fix. Do I do this from my desktop thru active sync, from the my docs on the phone or Manually?
Same goes for running the ADD-ON .cabs to allow cingular Video/ Realplayr fix.
Cant figure out the install. Googled and Forum searched 'keybord' couldent find the help.
Thank you!
fugi
Hate to say it but you need to read. Copy the CAB file to your device. Then open the CAB from the device. It will then prompt you to install. If it is something accessed intensely then put it on the device. If not then install it to the storage card.
fugitive said:
Lurker and 2nd time post.
Hello!
Started developing my 8525 this week.Went with the Bulletproof 1.40 oil Hard SPL, Black WM6 2.5, Sim unlocker.
Question is this:
I need help loading the BlackWM6 keyboard fix. Do I do this from my desktop thru active sync, from the my docs on the phone or Manually?
Same goes for running the ADD-ON .cabs to allow cingular Video/ Realplayr fix.
Cant figure out the install. Googled and Forum searched 'keybord' couldent find the help.
Thank you!
fugi
Click to expand...
Click to collapse
Thank you. I know there is a tutorial for it somewhere but I cant find it.
The Files included in the Keyboard fix for the Black 2.5 will not execute on my Desktop or my 8525. I have them copied to my storage card and when I click on any of the files they tell me it is not associated and that I need to open the file from within the application..I dont know what program the files are associated to.
fugitive said:
Thank you. I know there is a tutorial for it somewhere but I cant find it.
The Files included in the Keyboard fix for the Black 2.5 will not execute on my Desktop or my 8525. I have them copied to my storage card and when I click on any of the files they tell me it is not associated and that I need to open the file from within the application..I dont know what program the files are associated to.
Click to expand...
Click to collapse
Are these *.cab files or *.zip files???
I thought they would act as cab files but they identify as 0csetup...001... 002.... 003
files not as cab or zip.
fugitive said:
I thought they would act as cab files but they identify as 0csetup...001... 002.... 003
files not as cab or zip.
Click to expand...
Click to collapse
I dont know what your are running. Delete those a get the keyboard fixes which you need. What is the exact device you are using and the carrier? What keys are not working correctly? Where did you get those fixes??? If they are not *.cab files then dont run them.
Don't extract the cab files - copy them directly to your storage card and run them from there.
Yes That was the trick thank you. I had DLed them to my Desktop and tried to transfer the files in activesynch. DLed to my phone and it was golden.
Thanks for your patience.
Does anyone know how I can convert png or ico files to dll files so that it can be used with SK Shortcut Manager or PocketTweak to create shortcut icons?
I have been searching online for a method for a long time and it appears that the only way to do so is by using Visual FoxPro. However, I don't have this program and there isn't a trial version i can download. (I don't want to spend money buying a program just to make a few dll files for my shortcuts)
I have also tried some other freewares and trial softwares online but none of them are successful.
Any help with this is greatly appreciated. Thanks.
Attached here are the 3 icons i would like to turn into dll files. If anyone know where to get them as dll files, that would be great too.
Loook for ResHacher, it is free!
http://rpi.net.au/~ajohnson/resourcehacker
Bulldog said:
Loook for ResHacher, it is free!
http://rpi.net.au/~ajohnson/resourcehacker
Click to expand...
Click to collapse
just see the link doesn't function.
Nevermind zip file attached. enjoy
Still not working...
i downloaded the program and used the IconDLL.dll file i got from PHM Tools then i changed the icons inside to the one i want. However, I still can't get it to work despit doing that.
What I did after getting the new .dll file with my icon in is use the shortcut creator program I found here. I tried to read other .dll files and i could see the icon but as soon as I use my own .dll file I made (which I put in the /Windows), it crashes the program. I then tried another program, the Strat Menu programs manager and I still could not read my icon.
I even went through all the post in this forum about shortcuts and tried some of the tricks there. I downloaded Microangelo Librarian and attempted to use IconDLL.dll by adding in my own icons (as vijay suggested in an earlier post), however, according to the advice he gave, that should be it and it should've been easy. This wasn't the case because I couldn't save the file as a .dll file since it said that the file is a read only file or is locked. I then tried save as but that only save it as a lib file.
I have been at this for a whole day now. Any advice would be greatly appreciated. Thanks.
** oh and I even tried using SK Shortcut Manager and I still couldn't read the .dll file I made :..(
Hi teresa611
I also use Microangelo Librarian.
what we have to do is just open the program.
1. Drag any icons into blank librarian.
2. Save as *.icl
3. Just rename those *.icl to be *.dll
4. Copy to PPC
5. Enjoy
Hope this help
tried and failed
even tho i changed the name to .dll, when i dragged it into my pda, it's still a librarian file and i was unable to read it. perhaps, i'm doing something wrong if it works for other people.
i'm starting to feel this is more trouble than it's worth. Thanks for the advice tho. If anyone else has any other ideas, please let me know.
teresa611 said:
tried and failed
even tho i changed the name to .dll, when i dragged it into my pda, it's still a librarian file and i was unable to read it. perhaps, i'm doing something wrong if it works for other people.
i'm starting to feel this is more trouble than it's worth. Thanks for the advice tho. If anyone else has any other ideas, please let me know.
Click to expand...
Click to collapse
For me, I have to put .dll into \Windows; otherwise, it is not work.
In addition, you may try using icon_viewer utility to view those dll in order to ensure it is a work dll.
The attach is icon_viewer. Copy to PPC and run.
Thanks. I'll try it later when I get off work. I really hope it works, cause I'm running out of forums to search
problem solved!!
just to refresh this thread and to give others some info if they're stuck with what I was stuck with. I finallt managed to create .dll files and use them in my pda as shorcut icons.
Instead of using Michelangelo Libarian which I am still confused about, I found this great freeware called "BeCyIconGrabber". It allows you to extract icons from .dll and .exe files and you can also load multiple icons there as save it as .dll.
Thanks again to everyone who tried to help
I'm struggling... . I have my XDA hooked up to my Vista laptop and everything connects perfectly. Whilst browsing this site I found an iphone skin thing which looks quite impressive. I thought that I'd like to turn my XDA into an iphone so I'd download and install it... . Well, to be honest, I don't really know how to. Are there any idiot-proof guides out there for installing appliations...? I've downloaded the file to my desktop, tried copying it to my program files on my XDA (which works), but when I click on it, it just won't install. Is there some sort of file I need to click on specifically...? Is there a better way of getting this to work...?
Secondly I've been trying to find a T9 input thing. I hate having to use my stylus to send a quick SMS, and would love just to find something which replicates my phone's keypad on the screen, something I could use my fingers on, something on which I could type quickly. Does anyone have any suggestions...?
Thanks very much.
installing pocketpc applications can be don in many ways
2 most common is
1 a cab file which the user click on after transfering it to the pda
2 an exe file which requires to be run of the pc and it use the sync software to copy the cab file to the pda and run it
for t9 try doing a search for phonepad in the forum
not sure if it's compatible with old 2003 but you can give it a go
Thank you for your help! I downloaded this phone pad thing, extracted it from WinRAR to a folder on my desktop and had a look inside. There are no .exe files which I can run from my computer, and no .cab files which I could transfer to my PDA and run.
The first file is setup.xml and then it's a whole series of numbered files which Windows calls 001 file, 002 file, etc... . Any ideas about what I should be doing...? Thank you!
David333 said:
Thank you for your help! I downloaded this phone pad thing, extracted it from WinRAR to a folder on my desktop and had a look inside. There are no .exe files which I can run from my computer, and no .cab files which I could transfer to my PDA and run.
The first file is setup.xml and then it's a whole series of numbered files which Windows calls 001 file, 002 file, etc... . Any ideas about what I should be doing...? Thank you!
Click to expand...
Click to collapse
Rather than extract it, you might just want to check whether the phone pad thing itself isn't a .cab
i suspect it is think winrar can assi cabs with it iso files too so dont just look at the icon
Rudegar said:
installing pocketpc applications can be don in many ways
2 most common is
1 a cab file which the user click on after transfering it to the pda
2 an exe file which requires to be run of the pc and it use the sync software to copy the cab file to the pda and run it
for t9 try doing a search for phonepad in the forum
not sure if it's compatible with old 2003 but you can give it a go
Click to expand...
Click to collapse
Thank you friend :0 It helped me also, I was facing the same kinda situation
Thanks for all your post, I have the same problem and now it has been sorted!
I am having trouble instaling .cab file I install them on to my memory card the use file explorer to find them tap on set up them it goes to my opera browser and then to a white screen and then nothing can anyone tell me what I am doing wrong or guide me to where I can get help
hoag50 said:
I am having trouble instaling .cab file I install them on to my memory card the use file explorer to find them tap on set up them it goes to my opera browser and then to a white screen and then nothing can anyone tell me what I am doing wrong or guide me to where I can get help
Click to expand...
Click to collapse
It sounds like you had first opened the cab file (on your PC desktop maybe?) and are trying to run the setup.xml file inside the cab, instead of the cab itself. Copy JUST the single .cab file over to your phone's card, and click that to run it.
yeah like sirphunkee said, do not unzip the downloaded files before transferring them to your phone.
TRANSFER THE FILE AS IT IS, and RUN ONLY THE .cab files from the phone. No other extensions.
Thanks for the help that is what I was doing wrong I was unpacking them again thanks for the help
hoag50 said:
Thanks for the help that is what I was doing wrong I was unpacking them again thanks for the help
Click to expand...
Click to collapse
np, that one happens all the time
so how do you unistall a cab file..im new to winmo as far as tweaks i come from blackberry, so what i did is i installed a clock cab. but its not like i thot so i cant unistiall can i get some help?
i got it, my add/remove programs wasnt showing...resolved on my end thanks.