Database Users

New Sensor or What? Help need!

Dear all, please dont kick me so hard, but can anybody explain me what is window (sensor, device???) on the top of htc logo and between calldynamic! What is this, proximity sensor NO?! IRda - NO?! In manuals i couldnt find this place explanation. Sorry didnt read all threads to find thruth!

DTNT said:
Dear all, please dont kick me so hard, but can anybody explain me what is window (sensor, device???) on the top of htc logo and between calldynamic! What is this, proximity sensor NO?! IRda - NO?! In manuals i couldnt find this place explanation. Sorry didnt read all threads to find thruth!
Click to expand...
Click to collapse
First off, welcome to XDA
Secondly, do you mean the 3G Camera or earpiece or the light sensor?
Can you provide image of what you are describing?
Check out page 25 of manual

Thank you Spartan for you hospitality, no this sensor in the left side, it is not camera and light sensor! you can see it only in some angle, stright look will not show you this place. later i will try to highlight in pic.

DTNT said:
Thank you Spartan for you hospitality, no this sensor in the left side, it is not camera and light sensor! you can see it only in some angle, stright look will not show you this place. later i will try to highlight in pic.
Click to expand...
Click to collapse
No sensor, just your imagination, scratch or build defect.

I dont mention that it is sensor, but what is this? please see in the angle to your apparatus and you will see it, maybe something that producers did for future uses? just take a look!

DTNT said:
I dont mention that it is sensor, but what is this? please see in the angle to your apparatus and you will see it, maybe something that producers did for future uses? just take a look!
Click to expand...
Click to collapse
I have check on my girlfriend's TouchHD and there is....... NOTHING!

There is nothing there. Your phone might have some kind of minor manufacturing flaw that makes you think there is something there. I have had my HD for a year and have never heard of anything being there. I looked at it from all angles, and compared it to the right side. My phone shows nothing. Both the left and the right side look the same.

Thank you all for your attempts, but I will tru to put pic of it (if camera will capture it), and maybe than you can explain me this place usebility. Will try to give a pix on monday!!!

DTNT said:
Thank you all for your attempts, but I will tru to put pic of it (if camera will capture it), and maybe than you can explain me this place usebility. Will try to give a pix on monday!!!
Click to expand...
Click to collapse
I highly doubt there's anything. I've recently opened up my phone to replace the screen and had to mess around in there with the camera/speaker/light sensor and there was nothing else.

Please see attached photoes, can anybody explain this window dedication? Waiting for your replyes.

looks like a air bubble under the screen protector.

Oh common guys, it is not bubble, not scratch, please look on top of htc logo untill calldynamic, this thing placed between them. Mayby mine is special, super-assembled!!!

ok, i was doubtful but i checked anyway and couldnt see anything, then i saw your pics and thought id give it another try and nope, nada, then i figured id pull it to bits and have a gander and inside and still nothing.
Whilst this was slightly entertaining im affraid to say you have probably got a bubble under the first layer of screen.
That is the most likely explination, the chances you have a one off device that no one else has which has some mystical new sensor is so small you'd be better off putting your life savings and the money you made selling your house on the lottery in the hope you'll hit the big one!

Ok, if accept the version that it is bubble under first layer, can you explain why this bubble has so right geometric forms? The guy next to me has an IPhone, and even him thought that it is porximity sensor like his apple has. Strange and Mistyc!!!

I agree that the shape is very geometrical, and I can understand how it would make you think there is something special there. It is unique, but I still don't think it's related to any functions or features the phone has. Look at the letters "htc". You have a slight frame around each letter that is the same shade/color as the "window" you are referring to. My "htc" letters have no such frame around them. The black of the phone comes up directly to where the white letters start.
So, I think it's some kind of strange manufacturing effect.
I'll even attach the service manual for you to look at.
Download service manual here

To be truthfully honest I thought you were seeing things until you posted your 3 pics. Yes, it does look geometrical in shape, but I can assure you that this is not a sensor, button or anything else intended by HTC. As stated by others previously is looks like a flaw in some way, either on the device itself or caused by the skin protector. If you take your device to any retail shop and compare it with another HD this may ease your concerns and I'm sure the staff in the shop would also say as everyone else here has.

Absolutely agree with htc letter, before your post i don't even see this feat, well, i think i should agree with that this window has no any function. Besides i saw off. manual, no-nothing. OK, waiting for another variants of reply.

Fallen Spartan said:
To be truthfully honest I thought you were seeing things until you posted your 3 pics. Yes, it does look geometrical in shape, but I can assure you that this is not a sensor, button or anything else intended by HTC. As stated by others previously is looks like a flaw in some way, either on the device itself or caused by the skin protector. If you take your device to any retail shop and compare it with another HD this may ease your concerns and I'm sure the staff in the shop would also say as everyone else here has.
Click to expand...
Click to collapse
Well, first of all device was bought not in EU, second, in my country very hard to find even person who owns device, too much expensive for our market, i'm even not talking about shops to compare my apparatus with others. By the way, does anybody know, whether in this forum chats somebody from HTC. i would asked him directly.

DTNT said:
Well, first of all device was bought not in EU, second, in my country very hard to find even person who owns device, too much expensive for our market, i'm even not talking about shops to compare my apparatus with others. By the way, does anybody know, whether in this forum chats somebody from HTC. i would asked him directly.
Click to expand...
Click to collapse
I would just ask HTC directly on their contact site:
http://www.htc.com/europe/CS_Mail.aspx

Looks like something trapped under the screen protector, did you peel it back and check?

CDMA Hero screen template

does anyone have a printable screen template for the sprint hero?
i found some for the touch pro and diamonds but havent been able t find one for the hero .

Please elaborate? Do you mean just screenshot of the stock screen?

gu1dry said:
Please elaborate? Do you mean just screenshot of the stock screen?
Click to expand...
Click to collapse
well im looking for a template so that i can trace and cut for a screen protector.. i know you can purchase screen protectors that fit the hero but i have yet to find one that fits the entire screen ( to the very top of it ) most only cover to the logo at the top fo the screen.
and my wife wants a mirror one. so she bought one ( without my knowlage ) but it needs to be cut to fit ...

Oh ok. Once I get home from work I'll see if I can dig something up (if some hasn't beat me to it).

I can just whip up a black square that's 320x480 for ya... stay tuned.

Here you go. Just print this out and it'll be 320x480 pixels (size of every droid phone from g1 to hero, excluding the newer ones)

I would believe that he's looking for a template covering all the glass...not just the section that is over the screen.

HeroMeng said:
Here you go. Just print this out and it'll be 320x480 pixels (size of every droid phone from g1 to hero, excluding the newer ones)
Click to expand...
Click to collapse
Good work but he is looking for something to cover every inch of the glass. More precisely, there is a little curve at the top that I am pretty sure he wants to cut out exactly so that you can't tell there is a screen protector on.

Not sure if you ever found what you were looking for or if you even still have a hero but i am about to make one. I have a new phone coming moday so i am going to apply tape to old one and cut it out and draw it up in autocad. stay tuned
Edit: Ok here it is. i have also created a new thread to hopefullly have stickied. please search Screen Protector Template (PDF) and vote the thread, thanks.

kyleblakepeters said:
I would believe that he's looking for a template covering all the glass...not just the section that is over the screen.
Click to expand...
Click to collapse
how about one for the Droid 2?? ive searched high and low cant find one for the life of me

Black stripe at the center left of my screen

Hi guys,
Today I recieved mine Galaxy S, flashed it right away to JM2.
However I dont know if the firmware did it or it was a problem right away.
Anyways, I have super tiny black stripe at my screen from left to right.
It is not a scratch and I dont believe they are dead pixels, because its a whole line.
Maybe other users has it as well?
If you guys want pictures I can try to make one and post it later, but I dunno if you guys will able to see it.
Kind regards,
An1mA
*EDIT* cant post the picture cuz i dont have any rights to post links outside xda -..-
*2nd EDIT* cant make better shots cuz its coming from my previous phone nokia n97. Anyway I will rma this my phone back to the shop sadly.

just attach them to your post.

problem with camera

hi!
i have black things on the camera:
(press on the picture for big view)
long time ago i had same thing but huge!!! then the phone fall again and it disappeared but this came, and now im afraid to throw him again from high place, so im tring from low but it dosent disappeare....
any one know how to fix this?

It is signs of broken camera.. sooner or later your camera will become worst and...... HAHAHA... just kidding.. not sure what exactly that "black things"

thanks...
some1 know what this is???

DubelBoom said:
hi!
i have black things on the camera:
[Image removed]
(press on the picture for big view)
long time ago i had same thing but huge!!! then the phone fall again and it disappeared but this came, and now im afraid to throw him again from high place, so im tring from low but it dosent disappeare....
any one know how to fix this?
Click to expand...
Click to collapse
Sorry, can you clarify if you are throwing your phone on the ground in an effort to fix this? If so, stop. Seriously, don't do it.
Looks like dirt on the lens. Is it on every picture you take?

Mr_JMM said:
Sorry, can you clarify if you are throwing your phone on the ground in an effort to fix this? If so, stop. Seriously, don't do it.
Click to expand...
Click to collapse
Sound advice.

Mr_JMM said:
Sorry, can you clarify if you are throwing your phone on the ground in an effort to fix this? If so, stop. Seriously, don't do it.
Looks like dirt on the lens. Is it on every picture you take?
Click to expand...
Click to collapse
I have a sillicone case, so the device is ok. Don't worry for that
And yes, i have it on every picture i take.

DubelBoom said:
I have a sillicone case, so the device is ok. Don't worry for that
Click to expand...
Click to collapse
That's not going to stop it suffering shock damage and the silicone case will NOT protect the phone to that much of an extent. *!&*%
mmmmm.....
DubelBoom said:
And yes, i have it on every picture i take.
Click to expand...
Click to collapse
Did you clean the lense?
I'm guessing that dirt has probably got on to the inside made worse by your throwing the phone onto the ground (I hope that's a joke I really do....)

hey guys
my desire hd fall yesterday and my camera open in black screen nothing work
wat do you think ?

Mr_JMM said:
I'm guessing that dirt has probably got on to the inside
Click to expand...
Click to collapse
I agree with this but to me it looks like maybe small pieces of broken plastic or glass between the lens.. the only way to remove this would be to open the phone and clean it out, I wouldn't recommend doing this yourself though.. maybe try to contact your local HTC repair centre and see if they would be able to do this for you.
@ronalgps: sounds like you have maybe dislodged the camera or broken the connection in some way from the fall.. as I said above try to contact your local HTC repair centre and see if they can fix this for you.

dceightfive said:
I agree with this but to me it looks like maybe small pieces of broken plastic or glass between the lens.. the only way to remove this would be to open the phone and clean it out, I wouldn't recommend doing this yourself though.. maybe try to contact your local HTC repair centre and see if they would be able to do this for you.
@ronalgps: sounds like you have maybe dislodged the camera or broken the connection in some way from the fall.. as I said above try to contact your local HTC repair centre and see if they can fix this for you.
Click to expand...
Click to collapse
i live in Israel, we don't have HTC here XD
i will take it to a private store.
and i don't throw my phone, i leave it about 2-3 cm top the floor to a blanket..
thanks for all!
p.s
on one of the fallings, they disappear, but then, they came back

DubelBoom said:
on one of the fallings, they disappear, but then, they came back
Click to expand...
Click to collapse
like I said.. sounds like something is in between the lens so depending on how much you move the phone maybe they move out of place for a while.

Re-House Your Xperia Play : Things to Know

This is going to be basically a review, not a tutorial, of what I experienced after I re housed my R800x in white and the steps I went through to get it done, I have no prior knowledge on the process, I simple "went for it" and had success.
~~ Please Note: Performing this can seriously damage your phone and if done wrong will possibly permanently destroy your device, please read everything and do everything slowly, Please understand you may attempt this at your own risk, you have been warned! ~~
For a good understanding on how to tear your Play apart and not break anything check this video out, http://www.youtube.com/watch?v=-3n5ZfkqhzE
You can find the White Housing I purchased in these 2 links
The outside of the screen (digitizer) as seen in First photo
http://www.ebay.com/itm/Touch-Scree...&otn=2&po=LVI&ps=63&clkid=7007674525043897251
The White Housing Top , Middle plate, Control pad plate and Back as seen in the Second and Third photos
(I have seen a cheaper one since I bought mine, but this is the one I bought)
http://www.ebay.com/itm/FULL-Housin...500747?pt=PDA_Accessories&hash=item27bf9d978b
This link is another R800x thats branded Verizon but I doubt it having the service ribbon sticker (for lack of better words which comes into play later) because they dont show a back view of the Middle plate
http://cnn.cn/shop/sony-ericsson-xperia-play-cdma-black-housing-verizon-branded-p-12588.html
After getting your parts and watching the video you should be where I was at in Photo Four, my phone torn down and the new pieces ready to make this r800x look great.
Photos Five and Six -are close ups reviewing it all.
Photo Seven - is where I started, the touch joy stick pcb ribbon. It was kinda scary thinking if i rip this thing or pull to much that the touch pads wouldnt work anymore, and thanks to ShadowGun I was able to verify they still did. I used the blue tool for prying the phone , to help peal back the ribbon as you see it, you can give it a decent pull with your fingers as you get enough pealed up, try to pull as close to the glued end as possible so you dont risk tearing or something.
Photos Eight and Nine - I had finished moving the touch pad ribbon to the new white control pad plate and started removing the Menu, Start and Select buttons and transferring them to the white plate. Using the blue tool again sorta scrap up the backing to each of the; Menu and Start and Select buttons, it helps to push from the other side on the button a little. You need to try and not to deform the sticker/glue piece that holds the buttons in place or it might Not stick to good on the new plate, a sweat gripping moment that I first thought would just never work but patience does pay off in this step.
Photo Ten - it was all done, that piece at least.
From there I moved onto the the Middle Plate, which required a few steps if you decide you want to swap these out. One in particular that left me clueless for a few days without service, bare with me on this part..
There is a black Antenna sticker on the Bottom half of the Middle plate on your R800X, which has a gold ribbon on its opposite side that finishes a circuit, without this circuit completed your phone will Not have service and dialing *228 will not work your phone will tell you, in a mans voice "The code you have entered is in-correct please check you code and try again" - The first time I heard that I was thinking hmm thats probably not good and Verizon told me "thats not programmed in our system, you should Never get a msg like that or a mans voice" So I had them send me a replacement ( Of course I didnt mention this was all my fault and I re housed it, and thats the real reason I wouldnt go to the store to have it checked out, but that shouldnt matter right )
Upon getting the replacement phone I, for somehow the first time, Noticed the black sticker antenna on the back of the Middle plate. I grabbed my original housing and noticed the sticker antenna on it as well, so I pealed that off and revealed, to me which was previously unseen, this gold ribbon connects a circuit with two terminals on the phones mother board. The gold ribbons two ends slide into a slot on the Middle plate, underneath it to make the connection. I replaced this black sticker onto the new White Middle plate because the back of the L1 and R1 triggers are White and they are Black on the original Vz housing.
Photo Eleven-Shows the back of the New white trigger Middle plate, no black sticker antenna
Photo Twelve-The Middle plate from the Verizon replacement
Photos Antenna 2 and Antenna 3-These are the other 2 antennas also needed for service, be sure to pull those off and place them onto the new middle housing of your new phone.
For the r800i and r800a they have another antenna on the middle plate (I just dont have a photo :crying: I have an r800x) I can tell you at least that if your holding the middle housing and the Antenna 2 is on your right, the r800i/r800a other antenna will be on the left side of the housing.
Photo Thirteen- I wanted the White triggers so I super glued the black sticker antenna back on, worked out pretty good if you ask me, minus my thumb print of course. .
Photo Fourteen- I circled the inside area of the Middle plate where the you can see the opposite side of the gold ribbon that makes the connection with the mother board of the phone in the top half and you can see its not on the New Middle plate in the bottom half of the photo.
If you decide to go ahead and swap the Middle plate, you will need to remove the speakers as well and I cracked my original plate removing the left speaker, they are in there pretty tight, I basically pryed up on them in anyway that I wasn't destroying any part of them. As seen in Photo Fourteen
In Photo Fifteen I was now ready to replace the Top half of the phone and put the new Digitizer on. You wont need any extra glue here, the New White Half of the housing comes with a clear plastic film on it (sorry I had already removed before I took the photo) that was protecting some glue, thats seems to be holding up pretty good a week later and I dont think it will ever come off. Once you have replace you new Digitizer on the new Top half of the White housing, you are ready to reverse the steps seen in the Video linked at the beginning , once you have completed that you will be enjoying your newly housed in luxurious White and Silver Xperia Play as I am in the Final Photos.
I hope this helps, this was the first time I tore a phone apart physically and might have my "names of pieces" wrong but I tried to explain it in a way that makes sense and simple to look at. I do wanna make a video or something because I think anyone looking to do this would benefit more from a better "visual tutorial" but I dont have much time as id like to and this should serve good.
I hope in anyone who decides to go through with this, and enjoys having a white Xperia Play like I have

That looks awesome!!! Mind taking a couple photos of the screen and with it powered on to see how good this after market screen is? Awesome job and the white looks nice and clean.

I bought my Xperia Play in white so this doesn't apply to me. But you did a great job there ! looks brand new !

jgregoryj1 said:
That looks awesome!!! Mind taking a couple photos of the screen and with it powered on to see how good this after market screen is? Awesome job and the white looks nice and clean.
Click to expand...
Click to collapse
I can definitelty take a few photos, I only replaced the outside of the screen, the actual lcd is the same from when I got the phone, the after market digitizer is just as clear an still allows the screen to keep its nice crisp image, Ill take a few photos later on though and update OP.
sufy1000 said:
I bought my Xperia Play in white so this doesn't apply to me. But you did a great job there ! looks brand new !
Click to expand...
Click to collapse
Thank you! I wish Verizon had offered it in white but figures they didn't, I makes it all that much more mine now though.. custom rom , kernel, and now housing I like it so much more.

Thats sweet nice write up. I'll probably do mine later this year or next year after the case and screen gets worn down and scratched up a bit more.

Thanks for this,
Would you reccomend cheap cases as I have seen diffrent colours (blue,orange) which I wouldn't mind trying.
Thanks

AloushA said:
Thanks for this,
Would you reccomend cheap cases as I have seen diffrent colours (blue,orange) which I wouldn't mind trying.
Thanks
Click to expand...
Click to collapse
Your welcome, Do you mean an actual case for the phone or a new housing?
Sent from my R800x using xda premium

Thank you, good sir!
I really appreciate your work here and I'll use this guide as soon as my housing arrives.

I will be doing this very same project in a few days. What is the use of the black sticker? If i break it will my Play still work? Please reply

androidtechdaily said:
I will be doing this very same project in a few days. What is the use of the black sticker? If i break it will my Play still work? Please reply
Click to expand...
Click to collapse
The black sticker completes a circuit that is needed for service. Idk exactly what circuit it completes but the sticker has a gold pcb type ribbon on it that makes contact with two pins on the motherboard. Without the black sticker in place your phone will boot with no service. I didn't find out until after the fact and if you look in my photo where I glued the sticker back on you can see its a little mangled but glued it down flat and my service is just as good as it always was . Well as good as 3g can be lol .. But to answer your last question as long as you pull the sticker off slowly and don't rip it you should be fine. The gold ribbon on the bottom half just can't be torn in half or the circuit won't complete. But it peeled off without tearing for me, just take your time and you should be good to go.
Sent from my R800x using xda premium

Great job mate!
How would You describe the operation difficulty from 1/10?
Ps. I have experience with w995 full rehousing and some others mobiles.

Hi, i wish to know what is beneath this 2 black square stickers marked in red circles, and what is their function.
Thanks

Great job, will keep this in mind, white looks so good, version didn't have that option
Sent from my little GIZMO ``\[©_o],,

I have the black one Xperia Play but i bought me the White Cover by amazon for 34,99€ (Complete and Original) But i dont think that i can do this without brick my phone ((

0mega007 said:
Hi, i wish to know what is beneath this 2 black square stickers marked in red circles, and what is their function.
Thanks
Click to expand...
Click to collapse
Is there a screw begind the stikers, holdding the l and r buttons hardware?

us there only black / white available?
Sent from my cm_tenderloin using XDA

Ill reply to everyone this evening!
Sent from my R800x using xda premium

shakalek said:
Great job mate!
How would You describe the operation difficulty from 1/10?
Ps. I have experience with w995 full rehousing and some others mobiles.
Click to expand...
Click to collapse
I dont think Im best to give you a good 1/10 rating, this is the only re-house Ive done, it wasn't to bad I suppose though. I think if you have some experience with the process then you shouldn't have to much trouble
ioo7 said:
Great job, will keep this in mind, white looks so good, version didn't have that option
Sent from my little GIZMO ``\[©_o],,
Click to expand...
Click to collapse
I agree, Verizon should've offered the option, but their to busy releasing phones that they dont plan to update...
evo_racer said:
I have the black one Xperia Play but i bought me the White Cover by amazon for 34,99€ (Complete and Original) But i dont think that i can do this without brick my phone ((
Click to expand...
Click to collapse
If you want to add me on gtalk I can help you if you decide to go through with it, I dont think you will brick it though
0mega007 said:
Is there a screw begind the stikers, holdding the l and r buttons hardware?
Click to expand...
Click to collapse
The sticker is covering up the actual buttons on the phones mother board that are L1 and R1 triggers. The L and R triggers are connected with metal rod, wound up with a small spring.
Nhialor said:
us there only black / white available?
Sent from my cm_tenderloin using XDA
Click to expand...
Click to collapse
Ive seen orange XPlays but I didnt see any housing's in other colors then white and black, but I only did a search for White specifically though.

216Monster said:
The sticker is covering up the actual buttons on the phones mother board that are L1 and R1 triggers. The L and R triggers are connected with metal rod, wound up with a small spring.
But if this stickers are removed, would the buttons fall off or stop working?
Click to expand...
Click to collapse

veeery nice man
i've changed my digitizer 2 times , on first time , i've broke my digitizer and on second time i succeed