Related
Is there a good way to get the current version of Cyanogen up and running on the SDK emulator? I have several people that complain about my application widget closing when they open or close the keyboard. The logs show nothing pertaining to my application and the only thing they all have in common is a stock G1 with Cyanogen 4.2.6 and no home screen manager. Many others with non-modded G1's do not have this problem.
I'd like to test it out in the emulator since I now only have a Droid
I found some instructions with an image file to use for this, but it was for a very old version of Cyanogen.
do a nandroid backup and then copy the files from it in to the directory of a virtual device you have already created
then all shall be good
Is there a good source to snag a existing nandroid backup of 4.2.6? I don't have a G1 or any other device to run a nandroid backup on. Too bad too cause I just shipped out my old HTC Magic a few days ago. Now all I have is my Droid.
I'll search around for one and report back if I locate one.
just did a dump for you
http://code.google.com/p/cyanogen-updater/downloads/list
itl be up in a few minutes
You just need to make a yaffs2 image of the /system folder from cyan's update.zip. The boot.img is already in the zip.
Search for mkfs.yaffs2.
That nandroid backup works perfectly in my AVD 1.6 emulator. Thanks so much for building that for me. I can test all my apps against Cyan now
Thanks goldenarmz too, I'll save this away for future versions. Does this work with Hero roms as well?
pcm2a said:
Thanks goldenarmz too, I'll save this away for future versions. Does this work with Hero roms as well?
Click to expand...
Click to collapse
Yes, you can run anything on the emulator like that
I also found out that trick a few days ago. The only problem I have is that I do not get an Internet connection.
Does the SDK simulate wifi, 3G or is there just another fictive network device? I've got DroidWall and Y5 installed. Furthermore I've got sometimes problems to start my wifi after rebooting (problem by manual copied wpa_...cfg, I guess).
I am not really sure where to search. I will investigate the stuff in the paragraph above but perhaps you've got another few hints for me?
btw: I've got 4.2.13, but that shouldnt make a big difference, should it?
Anybody has found a fix for internet Issue for Cyanogen system.img file and Android SDK emulator?
Regards,
Oscar.
Hey Guys at first sorry for my english i'm not good in it. And I'm a Android newbie I just gained a bit exerience with my Touch Diamond but it's broken now..okay but that's not the probleme....
If got a question:
After about 2 days of searching for an android 2.0 or 2.1 ROM I was a little bit confused of the diffrent news everybody was talking about. I'm root on my Hero. That was the first an last thing I made with my device.
1. Everybody is gonna talk about MoDaCo 3.0 but when I was trying to download his ROM my browser never got a request. Is the site down, where that ROM is hosted ?? Could someone give me a working link with this ROM ??
2. Is there a ROM with Android 2.0 or 2.1 outside or even not ??? And if yes are they working well ???
Would be nice if someone can help me =) thanks a lot.
Please answer soon if you know something about that =)
Greetz BassdoxXx
you can get modaco's roms at his website, www.modaco.com.
in the android development section there are some 2.0/1 roms, none of them works flawless, see for yourself if it fits your needs.
Thanks a lot for your fast answer. =)
The problem that i couldn't open the modaco page was my isp -.- i downloaded it at school
BassdoxXx said:
Thanks a lot for your fast answer. =)
The problem that i couldn't open the modaco page was my isp -.- i downloaded it at school
Click to expand...
Click to collapse
What? Does ISP's block that site? Lol, would never happened in Norway
there is a few 2.0+ roms out there for the hero.
most seem to be very usable now.
best sense ui would be lox/behnaam community release on 1.6.
http://htcpedia.com/forum/showthread.php?t=1448
there are two aosp roms worth looking at.
lox aosp ( im using that on a daily basis)
http://htcpedia.com/forum/showthread.php?t=1416
jnwhiteh aosp
http://htcpedia.com/forum/showthread.php?t=1528
Hello all,
I am having very specific request when it comes to choosing a proper rom for install on to my hero.
I am blind. Stock roms are only running Android 1.5. More robust accessibility features are available starting with Android 1.6 and improving even more with Android 2.0.
So for sure I am forced to upgrade my hand set.
There are various roms, some of their authors have even disable google specific features so I know I can't install such a rom.
All the accessibility efforts are being lead by the google developers.
Most likely these accessibility tools won't be usefull to most of you but please can anyone recommend me a rom where market is working and where the following applications can be installed and used?
- eyesfree suite of applications,
- talkback - the google screen reader for android,
- tts service.
All possible help is already appreciated.
sorry for the double posting. I've accidentally posted twice and I am unable to remove the post.
Hope anybody can help me please.
pvdeejay said:
Hello all,
I am having very specific request when it comes to choosing a proper rom for install on to my hero.
I am blind. Stock roms are only running Android 1.5. More robust accessibility features are available starting with Android 1.6 and improving even more with Android 2.0.
So for sure I am forced to upgrade my hand set.
There are various roms, some of their authors have even disable google specific features so I know I can't install such a rom.
All the accessibility efforts are being lead by the google developers.
Most likely these accessibility tools won't be usefull to most of you but please can anyone recommend me a rom where market is working and where the following applications can be installed and used?
- eyesfree suite of applications,
- talkback - the google screen reader for android,
- tts service.
All possible help is already appreciated.
Click to expand...
Click to collapse
i am on mcr3.0, i looked in the market, i can find 8 apps for eyesfree, tts is one of these. i didn't try to install one of these, but usually it works. the search for talkback returned nothing.
not that i want to be rude, but wouldn't you be better off with another phone if you are blind? i can not imagine a touchscreen only phone would be suitable for someone who is not able to see... especially because there are great devices out there that have a full qwerty keyboard, and come with android 2.0 out of the box... imho this would be a better solution.
again, the last thing i want to be is rude, but maybe this was your mistake: you posted in the htc hero section of this forum, the hero is a touch screen only device, including a virtual keyboard on the screen. it has only six buttons and a trackball, and two rocker buttons for the volume. just to make clear we are talking about the same device
if you are still up for the hero you could try the 2.1 rom from here: http://htcpedia.com/forum/showthread.php?p=30418&posted=1#post30418
best you try for yourself, it has some drawbacks, but maybe in areas you don't need (afaik syncing with exchange does not work for example, which wouldn't be a problem for me...). otherwise it might be worth to wait another week or two, we all are waiting unpatiently for the official eclair release from htc
keep asking if you need to know more, but maybe open a new thread, since your problems are very specific, and might drown between all the newbies question about "how to root my phone".
Hello,
Thanks for your reply and a great attitude.
Yes it may sound strange I have really got HTC Hero here. I know I'll be having problems with virtual keyboard but also I am afraid accessibility features of Android phones are not really such mastered one can use it daily. For example reading emails and content from the web browser is not yet possible. I just want to try how things work and I would also like to touch the virtual keyboard. If I can memorize computer keyboard and use it daily, typewriter keyboard, nokia mobile phone keyboard, then perhaps I might be able to make some use of this too.
I am sory but here are some more questions:
I haven't yet verified with some sighted friends but... is it possible my hero is running even older version of android like Android 1.5? I've based the assumption that it's most likelly running 1.5 because majority of the devices I was reading on the net are running it.
You've been triyng to locate eyes-free applications on the market but you were unable to find talkback. Are you sure you are running newer version of Android than 1.5?
Talkback is supposed to be installed with Android 1.6 andd 2.0 by default and you should be able to find it in the accessibility menu of your phone. I am not sure how well this applies to the custom roms.
Talkback requires google's accessibility api which is reported to be available on Android 1.6 upwards.
To tell you the full story first I've asked on the eyes-free google group whether some accessibility experts from there can help me but no one knowledgeable enough has replied to my query, so I'm trying my luck here then.
Oh I am really excited since I've got really well formed informative reply.
Thanks again
Edit:
Also, I've seen somewhere in the forums here this leaked HTC rom does not support the market. Has this been rectified already? You know if market does not work then most likelly I won't be able to install these applications I am tallking about.
Also you are mentioning possibility to wait a few weeks until HTC guys role out the official update for Hero. Wouldn't that break chances I will be able to root my device later?
Edit2:
Ooops, I should read better next time. Market works on this rom. The problem is paid apps can't be installed which is hopefully not a big issue for me since most of the accessibility enabled applications are free.
Which of the downloads from Hero 21 do I need?
63.18.55.06JU_6.35.09.26) or No Wipe Download. I will need a wipe I am sure but since this link says nowipe I am ehmmm. confused.
pvdeejay,
Unfortunately there is not an 'official' update for Android 1.6, 2.0 or 2.1 as of yet. There are rumours of one coming out soon, but nothing cast-iron yet.
You are correct in that the Hero runs 1.5. It does say it under Settings | About Phone (bottom item on list)| Firmware Version (bottom on list again), although without a working screen reader, there is probably little use in knowing how to find that.
If you did want to upgrade, I'm sure plenty of people could help find a ROM that would suit. The only issue with that is that you would need a rooted phone with a custom recovery image installed. Unfortunately, a lot of the procedures would not be easy for you, as the software that you might need to use to go through the procedure is probably not designed that well for accessibility tools. I don't know what kind of software you are using, but some of the instructions for making goldcards are quite complex, and involve editing some numbers in a 'table' which could be quite difficult for you, I would imagine.
I'm sure a friend would be able to help you out with making a goldcard/rooting if you did want to install a custom ROM (you'll probably be waiting a while otherwise ). They could even root their phone while doing yours (just share the goldcard between the devices).
Nonetheless, there is probably a ROM out there with little removed from it. I'll have a look just now, but you would need to have your phone rooted to do anything just now.
When it comes to rooting and installing custom recovery image. Do you thing the following instructions might work for me?
These instructions don't require a gold card:
- How to Root HTC Hero and Install Amon Ra Recovery Image
- How to install a custom rom on a HTC Hero
Hello,
Here are some numbers I've asked my friend to read from system -> about screen. The phone interface is in czech so I am unable to get some names translated to english, but I believe some of the geeks will understand these identifiers and might be able to help me what is best:
Code:
firmware: 1,5
63.118.55.O6U|6.35.04.25
2.6.27-a5504199
Build number: 1.76.405.6 146733 CL# 47214 release-keys
Software version: 1.0.0.A6288
pvdeejay,
to sum it up:
the hero definitly runs on android 1.5. there are no roms for older android versions, and a few homebrewn for newer versions, as we said already.
i searched for talkbalk on my 1.5 rom, so it is obvious that i couldn't find it...
about rooting of newer roms: it is just a matter of time, sooner or later there will be always methods of rooting a rom. what i meant by waiting is: wait until the official update is out, then wait a few more hours until the first rooted and customized rom is out
@pvdeejay,
I would have to agree with kendong2 that waiting for the official ROM is probably the best idea for you at the moment. There are no guarantees that an unofficial ROM would help, and it would be another user interface to try and learn.
@kendon,
I noticed he has the original, easily rooted version of the hero. IIRC, that is what I had on my G2 (and had the security unlocked bootloader out the box). If that's the case, would pvdeejay be able to 'fastboot boot' a full system img file for the purposes of testing it out to see if it meets the requirements.
The reason I ask is that I've only ever fastbooted my AmonRA recovery (I didn't flash it, because I never felt any need to). I'm guessing you could fastboot a full img, but I'm not sure about the practical issues of where it would be stored in memory...
Sorry guys originally I believed I am slowly getting into the matter and am begining to understand how flashing / rooting / upgrading home brew firmwares works on these phones.
After these 2 posts I feel like a total noob again.
Now again some very concrete questions:
What about these 2 guides I've posted links to?
Can I somehow got [Recovery] [13-Dec-2009] RA-hero-v1.5.2 installed so I will be able to do nandroid backup and then possibly flash some new roms?
Can I really brick my phone by trying to install amon ra?
Originally I thought the process works as follows:
1) get the custom recovery image installed (that's the amon ra in this case),
2) do a nandroid backup which will dump everything usefull on to the memory card,
3) backup and reformat the card,
4) download a rom, rename it to update.zip, put it onto the root folder of the cart, reboot the hero in recovery mode, do the wipe of the data partition, and run update,
5) reboot again and believe it's good.
Also some very significant bit is the thing you are all calling the radio. I am afraid I've not identified this bit thus it's missing in this summary.
Which files will I need to download if I decide to try Android 2.1 community edition 1.8? Are these files I've copied links to a few posts earlier both needed?
Can you please check this list, identify the things I am missing, and make suggestions and corrections why this may not work on my device based off of those number I tried to put down here?
Even if I won't be able to do this right now I'd be happy to get corrections as I can learn something new.
Of course I won't be doing all this on my own. I will ask my bro to read all the stuff to me and we'll do it according to your advices.
To give some bits about me and my computer skills, I believe I am a Windows power user, Basically I do also understand unix, I know what's bash how the files are arranged in a file system, can use command-line tools, telnet, ssh. I am working as a network administrator here so some background is there really.
Hi pvdeejay,
Answers to your questions here.
You can actually use fastboot to 'temporarily' load up the AmonRA recovery image into memory and run it from there. I do that on my phone, for the simple reason that I can't be bothered ) ) to flash the recovery. Once you get AmonRA running, the first thing you should do is make a Nandroid backup. It will be saved to your SD card, so then get the nandroid directory of your card and save it to your PC (just in case!)
So, here's how you'd go about this.
(Make sure you have the android sdk installed, and that adb and fastboot commands are working). USB cable should be plugged in throughout.
Before you begin, put the ROM you want (ie. Android 2.1 community edition 1.8) into the root of the microSD card (a .zip file).
Code:
adb devices
Should list your phone's serial number
Now turn off the phone, and turn it on with the back key held down (the one at the very bottom right of the device).
You should enter fastboot mode. Now type
Code:
fastboot devices
and you should see the serial number again.
Now type
Code:
fastboot boot AmonRA.img
where AmonRA.img is a file in your present working directory that is the filename of the latest custom recovery image. This does NOT flash your phone, it merely runs the image (pretty much as close as you get to risk free, other than sitting there with a tinfoil hat on )
See screenshot of the recovery image here:
http://www.sizzledcore.com/wp-content/uploads/2009/12/RA-hero-recovery-image-500x375.jpg
Make the Nandroid backup by choosing 'Nandroid Vx.x Backup' and waiting a while.
If your ROM needs a wipe first (most new ones do), select Wipe data/factory reset. You will lose all your user data on the device (but you've got a nandroid backup just in case)
You're now good to go. So choose "Apply sdcard:choose zip"
Now select the custom ROM zip file you downloaded. It doesn't even need to be called update.zip! Choose it from the list and push trackball.
Wait for the update.zip to go in. Do NOT turn off the device or pull the battery. First boot can take a very long time (upto 30 minutes). Just keep it plugged in via USB and wait...
As for radios, see http://android.modaco.com/content/h...-24-11-hero-roms-radios-in-update-zip-format/ and look at the section titled radios. The latest one is in bold. It is a .zip file as well, that you use these exact same instructions for to install (don't do the wipe or anything like that. Just install the .zip file)
anon2122 said:
@kendon,
I noticed he has the original, easily rooted version of the hero. IIRC, that is what I had on my G2 (and had the security unlocked bootloader out the box). If that's the case, would pvdeejay be able to 'fastboot boot' a full system img file for the purposes of testing it out to see if it meets the requirements.
The reason I ask is that I've only ever fastbooted my AmonRA recovery (I didn't flash it, because I never felt any need to). I'm guessing you could fastboot a full img, but I'm not sure about the practical issues of where it would be stored in memory...
Click to expand...
Click to collapse
this is correct so far, i did the same, except i installed the recovery. i play a lot with my phone, the installed recovery image with the nandroid backup is the best i have ever seen for a phone...
@pvdeejay
you always write so much...
i try to answer everything:
the two guides you posted are good for your situation. i never tried flashrec, but from what i read it is safe to use. i installed my recovery image through fastboot, the guide is here: http://android.modaco.com/content/h...ng-the-patched-recovery-image-on-your-device/
i have no idea how this works out for you, but my honest suggestion would be that you have someone seeing assisting you, you CAN brick your phone, though it is not likely if you follow the instructions precisely. the process is not very time consuming at all, so you don't need to bother anyone for days of their time.
edit: and now i read your post to the end and saw that your brother will be helping you, so you are on the right track
once you have the recovery installed you can make nandroid backups, and i would suggest that you do this first thing after installing the recovery, better make a backup too much than one too less...
the 5 steps you described are correct, except there is no need to rename the zipfile anymore, you can select any .zip from your sdcard.
the radio part is the number that begins with 63.18.55.06, then comes two letters and then more numbers. as by now the version can be identified by the letters, with JU being the up-to-date one. in general you can say the newer the better, but you have to try for yourself. start with the newest one, if you have problems go back.
thanks this seems to be pretty doable plus I will easily be able to restore the current data backed using nandroid backup.
Which android SDK do I need the latest one?
The commands I need to type are supposed to be typed on the PC or on the phone? I assume on the PC but I just would like to ensure.
Hero21 1.8 community edition has a recommended radio listed in the first post. Is it necessary to install that one as well? What should I install first the actual rom or the radio? Do I need installing radio at all? Should i do the same with radio i.e. renaming it to update.zip and using amonra to install it?
Also will I be able to use this method even if I install another rom (running amonra without actually flashing it)?
Edit:
sorry guys did not realize renaming to update.zip is no longer needed.
Edit2:
is there an easy way on how to access sd card from windows? I can't just remove the card from phone and insert it into my laptop because I don't have the proper adapter. Previously my boss was using the hero and perhaps it would be nice to backup the sd card first.
Edit3:
uhmmm, installing android sdk is perhaps not as simple as it sounds.
I have just seen this article.
I am on a limited gprs internet connection, can you please suggest sdk features I won't need to save some download bandwith?
- you need only the adb binary (thats adb.exe for windows) from the sdk, the rest is not needed for this.
- install the radio from the 2.1community-rom-thread, it is the newest. install the radio first. DO NOT PULL THE BATTERY until the phone has rebooted completely. if you pull the battery during radio upgrade your phone will be dead. it takes a few minutes, do not panic!
- you can copy the contents of the sdcard via the usb-cable, plug it into your pc and pull down the notification bar...
Do I need to run SDK Setup.exe when I have downloaded android sdk for windows?
Or can I simply run that binary from the command-line without the installation?
Do I need any USB drivers so my phone can be recognized?
Hi,
My brother's desperate to get a bluetooth keyboard working with his HTC Hero (UK). Currently runs the stock HTC 2.1-update1.
It's easy enough to pair them (we've tried two) but they remain paired but unconnected. With my Galaxy S (stock 2.2.1) they work fine. I gather this is because the Hero doesn't support the SPP or HID profiles.
We've also tried most of the apps we can think of: Keypro (sits on 'connecting'), Blueinput (force-closes when you click to select they keyboard), the JP one (sits on 'connecting'). Looking at the forum for keypro it looks like they're aware of this issue and haven't yet been able to correct it.
I've heard rumours that people running custom ROMs (eg based on Cyanogenmod) have been able to get keyboards working.
So - has anyone managed to get a bluetooth keyboard working with one of these devices, and if so how? Would prefer a solution that keeps Sense installed but he says he'll let me go to vanilla android.
Thanks in advance.
For the benefit of future users (and because the forum seems to be littered with questions like this!) we managed to get it working by installing FroydVillain 1.7.2.
Main problem was the lack of a flash_image binary to install the nandroid recovery image, but we copied over one we downloaded and it worked without issue.
Keyboard was recognised immediately and works fine as an HID device.
That's interesting! But could you detail, what were the steps of this successful installing? I also have an old bt keyboard, which I'm unable to use with the hero... Thank's if you can explain any more...
Mostly we used the instructions from http:##www|villainrom.co.uk/vBwiki/index.php/Installing_Custom_ROMs , though with a change for flashing the rom as the binary wasn't available on his phone.
More specifically - use the Froydvillain download mirrors at http:##www|villainrom.co.uk/forum/showthread.php?3698 and the wiki page above, and download:
Froydvillain 1.7.0
Froydvillain 1.7.1 upgrade
Froydvillain 1.7.2 upgrade
Universal Androot
AmonRA Recovery image
Stick everything onto the SD card - either using a USB cable and your phone, or we just used a USB card reader.
Install Universal Androot. We used HTC sync and just double-clicked on the .apk but you could also use a file manager (the wiki recommends Astro).
Install Android Terminal Emulator from the market.
Root the phone using Androot (he was running the latest 2.1 so we used the 2.0-2.2 root button).
The next bit is where we differed from the wiki instructions. They tell you to type:
Code:
su
flash_image recovery /sdcard/[I]<name of recovery image file>[/I]
reboot recovery
We found that there was no flash_image binary on my brother's phone (the error read 'flash_image: not found' so downloaded one - there's a copy at http:##cyanogen-files.carneeki.net/flash_image.zip ; I can't remember exactly where we got the one we used.
The instructions we found with the binary suggested something complicated involving remounting the system partition (it's normally read-only so you can't copy the binary there). Equally, you can't run it directly from the sd card without remounting as it's set not to allow executables. We just ran it from the data partition:
Copy the flash_image file to the sd card and use:
Code:
su
cp /sdcard/flash_image /data/flash_image
chmod 700 /data/flash_image
/data/flash_image recovery /sdcard/[i]<name of recovery image file>[/i]
sync
Then just power off the phone and turn it back on with the 'Home' button pressed. You should find yourself in recovery mode using your new recovery image.
We then used Backup/Restore > Nand backup to backup the current ROM to the SD card. Then from the Wipe menu we ran through each option in turn to ensure a fully fresh setup (I gather this isn't essential, but is advised). Lastly we used Flash zip and sequentially flashed 1.7.0, 1.7.1, then 1.7.2.
Then we rebooted, and waited... and waited... and waited... The VillainROM logo with the scary red-eyed android pulsated for about 30 minutes before I gave up and removed the battery. I took out the SD card and turned the phone back on; this time it was only a few minutes before we found ourselves with a fully functional (and factory-fresh) phone.
We put the sd card back in and set up the phone as normal; then turned on bluetooth and paired the phone with the keyboard (with ours it was a matter of typing a PIN on the keyboard and pressing enter, and duplicating the number on the phone) - it was instantly recognised as an HID device and worked perfectly!
Hope that's of some use - as I mentioned before it's essentially the same as the standard instructions except for the step involving the missing flash_image binary.
[edit: sorry, I'm not allowed to post links it seems! You'll have to cut and paste, and replace the '##' with '//', and the '|' with '.']
Thank you, you were very kind! But it seems basically only a normal fv installation on a rooted phone... Only I become a bit confused with all the /data/system operations... I can try installing fv 1.72, but at the moment I don't want to give back my floyo 1.20, which is more responsive (in my phone), but gives no sinal of accepting to connect the paired bt...
Yes - it was just a new ROM install which did the job - only the lack of flash_image and the lengthy bootup before we removed the sd card confused us so hopefully it's useful to someone trying the same.
I've not heard of Floyo - but the reason I decided to try FroydVillain was that it was CyanogenMod-based rather than HTC sense based as I heard that HTC don't include bluetooth HID support in their ROMs.
The CyanogenMod changelog http:##wiki.cyanogenmod.com/index.php?title=Changelog suggests that HID support has been included since 6.0.0 so I'd expect anything based on CyanogenMod since that should be fine. I chose FroydVillain simply because my brother's not very techy and I wanted a fairly mainstream ROM for him...
Not so simple...! Out of curiosity, I went to install froyd villain, but as I imagined the result was the same! "Paired but not connected"... It seems that when you rooted the hero, something remained in /system, no idea what was it! If a developer could read this, perhaps he could understand what happened... Floyo is simply another rom based on cm... the difference is all in the rooting process, seemingly...
Not for me
Hi Guys,
as I have been running Froyd Villain 1.7.2 for a rather long time now I thought I might give it a try. As there is an Apple Bluetooth keyboard dusting around here I had quite high hopes.
The pairing process worked well and it shows an Icon with the BT Symbol encased in Black and two arrows. In the BT settings it tells me that I am connected to a BT device, never the less, no matter what input field I choose, I cannot type on the BT keyboard. There is no other Input method I could choose from either so it's still not working for me.
Damn.
What keyboard where you using?
Good morning all!
I've tried to search both on this forum and on google in general, but I'm having trouble finding a good answare to my question.
I recently changed from a SD ROM to Pongsters great NAND build. Had to use DFT, due to problems with the CWM. I'm now on Gingerbread - excellent!
Unfortunately I live in this weird country called Norway and we use an alphabet with three more letters (Æ, Ø and Å). Is there anyway I could get these three letters into my gingerbread keyboard, any language pack?
I found this link by searching, but I'm not sure how to install it. It seems like i need CWM.
My temporary solution was to download a 2.3 modification of the "Scandinavian keyboard". It works, but I'm loosing the famous gingerbread keyboard.
A dictionary would too, almost be overkill, awesome.
All help would be greatly appreciated.
Hi mate, maybe this package can help you:
http://forum.xda-developers.com/showthread.php?t=875202
the above is an add on keyboard, you will need to switch to it through keyboard selection.
Otherwise you can push the content of your CMW zip with adb (i suggest to pull the original files before).
adb remount
(optional, gets the original file from your phone) adb pull /system/app/LatinIME.apk "local Location" (ex. c: or /home/user/desktop)
adb push "replacement APK file location" /system/app/
(optional, gets the original file from your phone) adb pull /system/lib/libjni_latinime.so "HDD Location" (ex. c: or /home/user/desktop)
adb push "replacement lib file location" /system/lib/
then reboot and you will use the new KB.
Cheers.
The keyboard looks nice, but as far as I can see there are no Norwegian (NO) alternate.
Anyhow, the ADB-way seems interesting. Never tried, or even heard, about ADB before, but that's why we have tutorials and forums, right?
Downloading the SDK at this very moment.
bluescan said:
The keyboard looks nice, but as far as I can see there are no Norwegian (NO) alternate.
Anyhow, the ADB-way seems interesting. Never tried, or even heard, about ADB before, but that's why we have tutorials and forums, right?
Downloading the SDK at this very moment.
Click to expand...
Click to collapse
Once you go ADB you won't back.
It's not that difficult, if you have some nerd past it will be very easy, otherwise it's plenty of tutorials, just follow them and you won't do it wrong.
Just a small hint,
with CWM always backup before.
w/out CWM always titanum backup.
Cheers.
Maybe a long shot, but have u tried SwiftKey? It supports the Norwegian language, u can set it to two language packages so it shows suggestions in both languages and no need to switch anymore.
I use it German/English and it is IMO just awesome. In particular after a few days using it it is predicting almost whole sentences by it's own.
Just a suggestion without messing with pushing commands ect. ;-)
Sent from my Nexus One using Tapatalk
Cyanogen has released the 7.2 version OS for HTC Hero GSM. I've seen a lot of people talk over the CDMA version, but none on the GSM one. Has anyone tried it out? I wanna hear the bad and good remarks that you have to say about it , by "you" I mean those who have tried it.
To be sure, this is the tipe of HTC Hero I'm referring to: spinei.hotnews.ro/wp-uploads/2009/10/htc_hero.jpg
I runned it for a week or two. As for stability it's the same as CM7, CM7.2 just has some ICS backports, nothing bad
What do you mean by ruining it?
People who own the CDMA version claim that on their phone it's a performance improvement from 7.0 to 7.2.
I have 2.1 official version on it. It's stable and somewhat ok in terms of flow in the menus. Will 7.2 be an improvement over the the official 2.1 version on my phone?
P.S. I didn't test any other version of Android, it never used anything except the stock version.
cata3092 said:
What do you mean by ruining it?
People who own the CDMA version claim that on their phone it's a performance improvement from 7.0 to 7.2.
I have 2.1 official version on it. It's stable and somewhat ok in terms of flow in the menus. Will 7.2 be an improvement over the the official 2.1 version on my phone?
P.S. I didn't test any other version of Android, it never used anything except the stock version.
Click to expand...
Click to collapse
It;'s not ruined, I had it on my device for a week or two. I thing it will beat your 2.1 official. It will not have HTC Sense. You get 2.3 version of android some ICS goodies. I didnt run official 2.1 on hero so i dont know how it is
What does HTC Sense has and cyanogen 7.2 doesn't have as equivallent?
From what I saw in youtube videos, cyanogen pretty much has something almost equal to HTC Sense as GUI. Are you referring to the HTC specific apps and widgets?
P.S. I misread "runned" for "ruined" )
Yup that fancy weather widget and all that stuff, but you wont miss it trust me, that raw android look is way better
One more question.
How functional are these:
- WIFI
- Bluetooth
- Camera
- basic phone functions(calling, messages)
- sound
? Did you have any problems with these in terms of errors or functionality(loss or low of signal, automuted, etc.)? And did you had any random restarts issues?
Nope they all work awsome, it's a stable release, those releases dont have problems with that. And you shouldnt be too scared to flash your device. So far I had 4-5 android devices that are rooted and flashed a million times without any losses, you may encounter a soft brick sometimes but you can fix that easily. You cant know how good is a ROM until you test it. So stop being a girl and flash it . No offence If you dont like it, there is a lot more ROM's on this forum, you dont have to choose CM7.2....
First time to install Cyanogenmod was not entirely easy
Hey all,
I just created an account to be able to post my experience with CGM 7.2 on the HTC Hero GSM. Everything I checked so far works fine, however there's a slight jaggedness in scrolling.
For me as a complete newbie it took about 6 hours to get it to run, mainly because I had to get straight what I actually have to do. There is no paucity of TO-DOs, just no individual one worked for me - I got it sorted out only by combining all kinds of posts from everywhere. That's why I want to share my viewpoint on this - without all kinds of different people airing their piece of the puzzle I would surely have given up!
The specs were as follows; starting with the "fastboot-info":
HERO CVT SHIP S-ON
HBOOT-1.76.0007 (HERO10000)
MICROP-010f
TOUCH PANEL-SYN0104
RADIO-6.35.15.11
Aug 4 2009,19:43:30
And software-information:
Firmware-Version 2.1-update1
Baseband-Version 63.18.55.06PU_6.35.15.11
Kernel-Version 2.6.29-7527f009 [email protected] #1
Build-Nummer 3.36.405.1 CL199109 release-keys
Software-Nummer 3.36.405.1
Browser-Version WebKit 3.1
So here's what I did:
0) I wrongly assumed that I need to unlock my bootloader directly, i.e. using the software from HTCDev. As I am using Ubuntu Linux, this meant quite a hassle in itself, and I did not manage it after all. The reason was due to an error when trying to get the Identifier Token needed by HTC to send you some clearance-file to unlock the bootloader:
Code:
fastboot oem get_identifier_token
...
(bootloader) [ERR] Command error !!!
OKAY [ 0.007s]
finished. total time: 0.007s
I found no solution to this problem, but tried to up- or downgrade my HBOOT-version. Luckily that wasn't necessary after all. A side-effect of it was that I installed adb and fastboot, which I happened to use later on (but are not necessary either).
Let me assure you: Unlocking the bootloader directly (in the HTC-way) is NOT necessary!
1) Getting root access:
I used UniversalAndroot-1.6.2-beta5.apk to do that, and conveniently installed it using
Code:
adb push, adb install
though if you don't want to install this nice utility, you can just install a File Browser and then install the package.
Now here's a quirk that cost me about an hour: Using the default settings, UniversalAndroot only claimed to successfully get root-access, but left everything unchanged! Only after finding a comment on some website did I try to check both check-boxes (log and temporary install) - this time it worked (it installs yet another app called SuperUser)! (I then ran it again without the temporary setting enabled, which at least did not revoke the SuperUser-Account). Anyways, adb is handy in this case again because you can just log in with
Code:
adb shell
and check if
Code:
su
gives you root access or says "Permission denied".
2) Deleting /system/etc/install-recovery.sh I got that idea from androidforums.com, and will probably never know whether it was really necessary. That just shows how desperate I became after 3 hours of poking around in the dark.
3) Installing ROM Manager from Google Market There's probably a quicker way to install recovery images, which does not involve a damn Google account! Or maybe it is not even neccesary.
4) Downloading and installing ClockWorkMod Recovery I did this using the ROM Manager. Again, there might be a more direct way. In any case, I was paranoid enough to install it twice, as it was recommended that way somewhere.
5) Downloading cm-7.2.0-hero.zip and putting it on /sdcard/ Again, I just used
Code:
adb push cm-7.2.0-hero.zip /sdcard/
to accomplish this, but my guess is you can just as well do it via USB.
6) Format cache, /data/factory, /boot and /system By that, I mean do this in ClockWorkMod (you get there by booting up with HOME+POWER). The last two locations to reformat are "hidden" in the menu partitions. This step is very important because without it, Cyanogenmod did only loop infinitely (for more than 10min) in its loading screen! I got this idea from the more detailed description at droidforums.
7) Install Cyanogenmod using ClockWorkMod That's straight forward; just select the image from sdcard and you're done!
Hope I didn't forget a vital step, and maybe it is helpful to somebody; at the very least my future ME will maybe find it useful again .