At the top were you see signal strength I nebver seem to have 3G enabled and internet seems to be slugish I sometimes have the Letters G,H,U I don't know what these mean is there a way I can have 3G all the time?
Thanks. Stock Rom!
as far as i know h and u stand for 3g not sure tho
djteotancolis said:
as far as i know h and u stand for 3g not sure tho
Click to expand...
Click to collapse
I don't think it does its so slow. I want to know how to enable 3G permanently.
were you getting faster 3g on other phones? and i think there is a cab but u may have to search for that
As far as I know (In my area) H is for HSDPA, which is an enhanced form of 3G. So it seems that you are getting 3G data... While G stands for GPRS, which is 2G.
No idea what the U would stand for though.
Also, if you have 3G enabled to auto-connect (I presume it is, if it's switching between the connections,) then your phone should just pick up a 3G signal whenever it can find it. If 3G is patchy in your area, you won't be able to get it all the time.
theblake said:
As far as I know (In my area) H is for HSDPA, which is an enhanced form of 3G. So it seems that you are getting 3G data... While G stands for GPRS, which is 2G.
No idea what the U would stand for though.
Also, if you have 3G enabled to auto-connect (I presume it is, if it's switching between the connections,) then your phone should just pick up a 3G signal whenever it can find it. If 3G is patchy in your area, you won't be able to get it all the time.
Click to expand...
Click to collapse
Right I see when I'm on HSDPA it is still very sluggish until I seem to hit 3G and its like wi-fi, so my 3G is already connected just needs a place with good signal when I'm on way to college on the bus I seem so find a good area with 3G. Thanks for your help.
H = 3G
G = 1G (G is much much slower than E=Edge=2G)
If you want to have 3G only enabled go to Settings>Wireless Controlls>Phone>Band>WCDMA (Note that if you're in an area with no 3g, you will have zero signal and the phone will not switch to edge or gprs).
In the right order:
G=1G: 'Global System for Mobile communication', or GSM, basic mobile network.. can be used only for SMS and Phone calls
E=2G: EDGE (or 'Enhanced Data Rates for GSM Evolution'), basicly GSM and GPRS (data transfer) combines..it allowes for speeds over the mobile network up to 9 600 bit/s
U=3G: 'Universal Mobile Telecommunications System', or 'UMTS' up to 2 Mbit/s data transfer on stationary devices and up to 384 kbit/s on mobile devices. About 40 times faster than GSM. This enables you to transfer data, such as images and be able to transfer data during a phonecall.. like sending a MMS or using Video Calls.
H=3G: 'High Speed Downlink Packet Access', or HSDPA, it allows for speeds up to 14,4 Mb/s though it is normally (at least in scandinavia) offered commercially in lower speeds, up to 7,2 Mb/s
Note: Because the most operators use high frequency to transmit '3G' signals, wich can cause your signal to be lower if you're inside (house or whatever, not outside), some operators though, transmit on a lower frequency, though then it's called CMDA, wich is also a form of '3G'
Had the same problem with a Telstra HD2 on Optus. Here's what you need to do. Settings -> Wireless controls -> phone -> Band -> Select auto for both. That should do it.
Related
Not trying to start any problems with my first posting but, The 3G icon on my touch hd has change a few times during since I purchased it, Does anyone know if this has been caused by any changes with EDGE.
What do you mean by has changed a few times? You never got 3G in New York did you?
The 850mhz bandwidth was converted from 2G to 3G. http://wmpoweruser.com/?p=2195
"AT&T is apparently changing the 2G and EDGE band, from its current 850Mhz to the weaker 1900Mhz. What that means, is that devices without 3G capabilities, like the original iPhone, will have to cope with the reduced coverage that the new 1900Mhz band has. In the other hand, devices supporting 3G networks like the AT&T Fuze, Tilt, Epix etc, will only benefit from this upgrade, as the 850Mhz band provides much better coverage, especially indoors."
Are you really getting a 3G signal in NYC? If that's the case I'm buying one
My Edge (E)icon has turned to G on about 20 occasions since purchase two week ago.Its not a steady G but will last about two minutes and then goes back to E
Interesting that you posted this. I am using my THD in NYC and NJ areas with T-Mobile USA. I have also noticed that the "E" icon on my THD had changed to "G" at some areas in NYC. But I have not noticed any difference in the data speed.
I just thought that my phone is able to acknowledge the T-Mobile 3G signal, but does not have to facility to access it. I do not know the technicalities behind it.
Isn't the "G" icon for a slower connection than EDGE? i.e. GPRS
yes!!!! now we have firm confirmation that touch hd is capable of 1G and 2G (EDGE)
buggybug0 said:
yes!!!! now we have firm confirmation that touch hd is capable of 1G and 2G (EDGE)
Click to expand...
Click to collapse
That is fricken HILARIOUS...!!!
bugsykoosh said:
The 850mhz bandwidth was converted from 2G to 3G. http://wmpoweruser.com/?p=2195
"AT&T is apparently changing the 2G and EDGE band, from its current 850Mhz to the weaker 1900Mhz. What that means, is that devices without 3G capabilities, like the original iPhone, will have to cope with the reduced coverage that the new 1900Mhz band has. In the other hand, devices supporting 3G networks like the AT&T Fuze, Tilt, Epix etc, will only benefit from this upgrade, as the 850Mhz band provides much better coverage, especially indoors."
Are you really getting a 3G signal in NYC? If that's the case I'm buying one
Click to expand...
Click to collapse
What this means is that us in the usa better hope that we can enable 3G on the HD soon.
ya. even if tmobile does require both bands, one for down and one for up, it'd be nice if only 1 workded (down) and we were able to at least be able to DL quickly or something. any speed boost is better than none
Just to throw it out there:
Don't know if it is 3G but my "E" changed to "G" on few occasions, for few minutes here in LA, CA (T-mobile). I didn't sample the connection speed, however; thus, wasn't able to tell any difference with the download speed. Edge is good enough for my usage, tbh.
--cheers
aabye said:
Just to throw it out there:
Don't know if it is 3G but my "E" changed to "G" on few occasions, for few minutes here in LA, CA (T-mobile). I didn't sample the connection speed, however; thus, wasn't able to tell any difference with the download speed. Edge is good enough for my usage, tbh.--cheers
Click to expand...
Click to collapse
G = gprs 1G which is not 3G and it's slower than Edge 2G....
When I look at the G settings
Its says GPRS,3G
aabye said:
Just to throw it out there:
Don't know if it is 3G but my "E" changed to "G" on few occasions, for few minutes here in LA, CA (T-mobile). I didn't sample the connection speed, however; thus, wasn't able to tell any difference with the download speed. Edge is good enough for my usage, tbh.
--cheers
Click to expand...
Click to collapse
You guys...these are the icons you'd expect to see on your HD for GSM coverage in order of speed:
G - Normal GPRS data
E - Enhanced Edge data
3G - 3G coverage
H - HSDPA, 3G turns to HSDPA on some networks while downloading data then switches back to 3G a few seconds after data use.
If you are seeing a G on the top bar, it means the HD is in the slowest GPRS data rate mode.
Thanks for the clarification, guys; I thought so. Oh well, no need for wishful thinking, then. 2G or not 2G...blah, curse you Hamlet!
--'night
Matterhorn said:
You guys...these are the icons you'd expect to see on your HD for GSM coverage in order of speed:
G - Normal GPRS data
E - Enhanced Edge data
3G - 3G coverage
H - HSDPA, 3G turns to HSDPA on some networks while downloading data then switches back to 3G a few seconds after data use.
If you are seeing a G on the top bar, it means the HD is in the slowest GPRS data rate mode.
Click to expand...
Click to collapse
max speed technically...(at least in Germany)
GSM:
G --> 56kps (0,05MBit/s)
E --> 256kps (0,25Mbit/s)
UMTS:
3G --> 384kps (0,38Mbit/s)
HSDPA --> 3,6; 7,2; 14.4 Mbit!!! (depending on operator) --> sometimes called 3.5G
LTE (long term evolution) --> 4G (Generation)
coming in 2010 from 25Mbit onwards
using opera, just for surfing, i think EDGE is enough. (without using flash in opera)
regards
irm
p.s. @galaxys: the old analog network is to be considered as the 1st generation; GSM (incl. EDGE) is the 2nd generation. EDGE is some sort of speed upgrade like HSDPA for UMTS.
-
Blacqsmith said:
Its says GPRS,3G
Click to expand...
Click to collapse
Your saying that it said 3G on the top of your screen not just G? If so can you post what rom/radio you are using?
You can find this in settings/system/device information
Blacqsmith said:
Its says GPRS,3G
Click to expand...
Click to collapse
Is this on the top bar or is it the popup network setting bubble? Take a pic for us...
There is a setting, probably hidden and changable via Advance Config and/or HD Tweak where if a network has 3G capability then it shows "<network> - 3G" (I disabled it via one of them)
This is regardless of whether your phone itself can handle the 3G network, which in the case of Touch HD it cannot as the device does not support the frequency of US 3G bands
Mine shows "O2 UK - 3G" for this reason regardless of whether it says G, E, 3G or H at the top of the screen.
Additionally, the "generation" things are as follows:
- - GSM - 1G
G - GPRS - 2G
E - EDGE - 2.5G
3G - UMTS - 3G (surprise surprise)
H - HSDPA - 3.5G
Hi.
I have an HTC Touch HD on the UK 3 Network.
It works fine with texts and calls n 3g but whenever I need data for an app etc it ignores a great 3g signal and tries to connect on HSDPA instead.
now this might not seem like a problem but it often switches from full 3G bars to one bar on HSDPA to check my email. this can take 5 to 10 seconds when it could have just done it on 3G.
what gives? am i using the right settings?
start/settings/phone/band
Network Type "Auto"
GSM/UMTS band "Auto"
when i was on Vodafone it would stay on the best choice ie HSDPA instead of all this swapping about.
I hope this is the right place to ask. not a major problem just a frustration.
thanks
don
In common with many (all?) of the five networks, 3UK has recently switched their handsets from staying on HDSPA to "only" 3g, but automatically changing to HSDPA when data traffic occurs.
HSDPA demands extra bandwidth to the cell. There might be a second or so delay while the handset re-negotiates the extra protocol, but it's done to give extra capacity on the cell, allowing more space for 3G voice calls, while ensuting your data speeds aren't affected by push-email or similar low-bandwidth devices using an always-on HSDPA protocol.
In short, it's completly normal and pretty standard nowadays. Keep your phone on Auto/3G, you can't force it to HSDPA only.
Just got the G2...awesome so far...only one annoyance. The tmo HSPA+ network has been available to me almost everywhere (in houston) but it seems to switch to the Edge (3G) network whenever it wants? Is there a way to force or to stay on the 4G network? Thanks!
GPRS (G) AND EDGE (E) are both 2G technologies (EDGE is on top of GPRS). 3G is UMTS, and HSDPA is again on top of UMTS. You can find a setting for 2G only in Android options, but there is nothing to force 3G speeds. The reason is that phone uses HSDPA all the time unless there is no HSDPA signal, then it drops to EDGE, or GPRS.
So you cannot force it, it's defined by what can the mobile network provide at that specific spot. If there is no 3G/HSDPA coverage, you have no 3G speeds. It is as simple as that. It's like if you would like to use WiFi even at places with no WiFi coverage - you cannot, because it's not there.
Ok, but lets say for instance sitting at my desk at work i'll be connected HSPA+ for 10 minutes and then it drops down to Edge? Whats the reason for that?
You were at the the borderline of what is and what is not a acceptable level of signal from the network tower. For 10 minutes it was above the limit, then it dropped and it was not more usable, so the phone dropped to lower speed.
thanks for the explanation man!
Wrong forum though. This this about having separate G2 and DZ forums is bound to lead to lots of this, I guess.
I have
latest radio of 2.14.50.04 and WM - ChuckyDroid
SkinoEVO rom for android.
When it shows 3G I dont get network at all. It only works when it shows H or sometimes when it show E.
I dont know whats the difference. 3G should work right coz i am subscribed to it. I might sound dumb but I just dont get it?
while playing youtube H would change to 3G and then youtube will stop throwing error..no network connection.
Any suggestions please. and i dont know if this would help. I am located in Houston Texas -USA
it could be that have a short outage when the mode changes ...
i never see E ... only H , or G , very rarely 3G ... and in my experience , transition is smooth , even to/from wifi
nadeemhannan said:
I have
latest radio of 2.14.50.04 and WM - ChuckyDroid
SkinoEVO rom for android.
When it shows 3G I dont get network at all. It only works when it shows H or sometimes when it show E.
I dont know whats the difference. 3G should work right coz i am subscribed to it. I might sound dumb but I just dont get it?
while playing youtube H would change to 3G and then youtube will stop throwing error..no network connection.
Any suggestions please. and i dont know if this would help. I am located in Houston Texas -USA
Click to expand...
Click to collapse
H is hedge, 3g is...3g E is edge. This symbole are used in france for exemple. But i don't know if it's same in usa.
l_endormi said:
H is hedge, 3g is...3g E is edge. This symbole are used in france for exemple. But i don't know if it's same in usa.
Click to expand...
Click to collapse
Correction..
H is HSPDA which is faster than 3G and it's not hedge => More info
3G is 3rd Generation Network which is faster than Edge => More info
E is Edge also known as Enhanced GPRS => More info
G is GPRS => More info
There are more... but those are generally the most known..
Correct me if i'm wrong.
I get
G
2G
3G -- rarely
H
white-energy said:
Correction..
H is HSPDA which is faster than 3G and it's not hedge => More info
3G is 3rd Generation Network which is faster than Edge => More info
E is Edge also known as Enhanced GPRS => More info
G is GPRS => More info
There are more... but those are generally the most known..
Correct me if i'm wrong.
Click to expand...
Click to collapse
Really sorry And i think you're right ^^
i cant get any of those just the bars with no letters no internet connection but i can get 3g on windows someone please help
nadeemhannan said:
I have
latest radio of 2.14.50.04 and WM - ChuckyDroid
SkinoEVO rom for android.
When it shows 3G I dont get network at all. It only works when it shows H or sometimes when it show E.
I dont know whats the difference. 3G should work right coz i am subscribed to it. I might sound dumb but I just dont get it?
while playing youtube H would change to 3G and then youtube will stop throwing error..no network connection.
Any suggestions please. and i dont know if this would help. I am located in Houston Texas -USA
Click to expand...
Click to collapse
A local friend of mine has this problem also.
No data connectivity when 3G is shown, only on EDGE or H. This is with a PPP build.
I switch him to an RMNET build, and his data works beautifully. But no auto backlight, g-sensor, or any of the other stuff that works in the evo kernel but not the nexus.
Here is the weird part - the software on our phones is IDENTICAL. Same Radio, same WM ROM, same android build, I even copied my android data stores to his phone, and it still does it.
Any clue, other than defective phone?
Mine does the same. Randomly drops the data connection and only way to get it back on is to go into settings/networks and disable and reenable the Mobile network connection. Starting to look at other builds as when you call someone it randomly crashes the phone app and you cant make any calls, only solution is to reboot...oh and the flash flashes before the camera actually takes a photo lol
H = HSPDA = 3.75G DATA -> Usually 7.2mbps (This is fastest normal data connection, sometimes along with voice)
3G = 3G UMTS DATA (old) -> Usually 384kbps (You will very rarely get this)
E = Edge = 2G DATA -> Usually 230.8kbps (You will get this when 3g signal is low)
G = GPRS (old) Usually 80kbps (You will get this when you are talking on 2g network)
Data rates are typical for HD2
You will sometimes get simultaneous 3G voice and data and sometimes not, depending on operator and location. (If your current location can't support simultaneous voice and data, you will see G icon when you are talking on the phone or have just hang up) You won't get simultaneous voice and data on 2G network. When on H, you "may" get HSUPA (high speed upload) but it won't have notification.
I think its the hardware rather than ROMs
I think its the phone not the software. RMNET and PPP thing is correct. I did tried one build with RMNET and dataconnection was fast but had lot of drops. So i took on PPP.
I tried almost all ROMS, Darkstone, Nexus, Hyperdriod, Dexters, MdeeJay's and dont remember others.. All of them gave same issue..when it shows 3G its always "No network".
So, i guess i have to deal with it.
But it would be good to find out how many different Tmobile HD2 models are in USA (hardware perspective). I heard the earlier one's have different antenna which received radio(AM/FM) compare to newer models. And even some change of LCD / OLED..something which i couldnt understand at all.
Well, Thanks guys for sharing your thoughts.
memin1857 said:
H = HSPDA = 3.75G DATA -> Usually 7.2mbps (This is fastest normal data connection, sometimes along with voice)
3G = 3G UMTS DATA (old) -> Usually 384kbps (You will very rarely get this)
E = Edge = 2G DATA -> Usually 230.8kbps (You will get this when 3g signal is low)
G = GPRS (old) Usually 80kbps (You will get this when you are talking on 2g network)
Data rates are typical for HD2
You will sometimes get simultaneous 3G voice and data and sometimes not, depending on operator and location. (If your current location can't support simultaneous voice and data, you will see G icon when you are talking on the phone or have just hang up) You won't get simultaneous voice and data on 2G network. When on H, you "may" get HSUPA (high speed upload) but it won't have notification.
Click to expand...
Click to collapse
Your response, while informative, has no bearing on this thread.
We are not asking what each letter stands for, as so many keep so helpfully responding to inform of us.
We need to know why, when connected to a 3G network, we get NO data connectivity, but do get it when connected to EDGE or HSPDA.
Also, your line about rarely getting UMTS is wrong, in the vast majority of the continental US, it is still the predominant wireless signal.
HI all!
Right now I am using [Build][10.12.2010][NexusHD2-FRG83D V1.8 PPP+RMNET][Kernel: hastarin r8.5.3_oldcam] and that is quite ok for me.
However I havent found anywhere on that build an option to disable HDSPA speed.
What I would like is accept 3G but disable HSPDA. Now I only have a change to disable 3G totally and only get 2G. Basicly area where I live is keeping me a situation that phone is very often trying to connect HSPDA but then changes is 3G speed. It causes me time&battery drain.
I have found a solution to force phone only use 3G but that is what I wanted. 2G and 3G are ok but I want to disable HSPDA.
Anybody could help me?
Up, Up... anybody have same kind of need?
i also need same help regarding this, reason is my data plan only use 3g (umts) and not 3.5g (hsdpa)... but my android always switch 3g to hsdpa back and forth and drain battery much faster
is there any tweak/program/widget/application that can enable 3g (umts) only?
windows doenst have this problem cause in winmo i can switch the option easily (enable/disable hspa)... but android dont have this kind of thing
I have the same problem. I don't even have HSPDA where I live, yet it tries to connect, fails, and then connects to 3G. It's a very time consuming processor to wait for the phone to do this when I am just trying to load a website.
Yes.. maybe it will not drain much memory but.. who wouldn't want a fast internet..
Afaik Hsdpa uses the same radio towers (or whatever the name is) as Umts... just different software. so there should be no battery drain caused by this.
This mite help you
1. Go to your dialer
2. Dial *#*#INFO#*#*
3. Click 'Phone information'
4. Scroll down to the first dropdown selection and set according to your preference below...
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best. (Maybe the Samsung Galaxy S will take advantage of this???)
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
Click to expand...
Click to collapse
Source http://www.google.ie/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
domenukk said:
Afaik Hsdpa uses the same radio towers (or whatever the name is) as Umts... just different software. so there should be no battery drain caused by this.
Click to expand...
Click to collapse
uhh... maybe you dont catch what us mean....
when umts change to hspda (icon change from 3g to H) then it use battery power.. in my case i use 3g (umts and not 3.5g or hspda )data plan only... but android keep searching hspda signal and THIS is when battery used the most (the process) and EVEN when my area have 3.5g covered but because i use 3g only data plan... then the back and forth process (3g<->H) will kep coming and rdrain my battery fast
so... we look for any kind of workaround so our android keep stay in 3g (umts) and not drain any unnecessary battery power searching for hspda
btw sorry for my english
agarp said:
This mite help you
1. Go to your dialer
2. Dial *#*#INFO#*#*
3. Click 'Phone information'
4. Scroll down to the first dropdown selection and set according to your preference below...
Source http://www.google.ie/support/forum/p/android/thread?tid=6a327a95211ac789&hl=en
Click to expand...
Click to collapse
i use this thing before and no luck
i use "wcdma only" as the option and android still process 3g and 3.5 back and forth, maybe android "thinks" 3g/umts and 3.5/hspda as the same?? android categorize umts and hspda as one big fat 3G network
i wonder why newer os like android doesnt have this kind of feature in winmo there is an option :
disable hspa = so hspda disabled.. AKA 2G or UMTS only
enable hspa = enabled hspda, hspa, hsupa etc.. AKA 2G, UMTS and HSPDA
try this settings
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
agarp said:
try this settings
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
Click to expand...
Click to collapse
isnt cdma auto (prl) used exclusively for cdma phones? (those phones with evdo and wimax thing) and not used for our hd2 (GSM)???
C'mon how this is impossible with newer phone software??
This feature has been in WinMo and Symbian in many years!!
It is really frustrating that almost every time my phone is trying to make HSPDA connect and then decide 3G is enough and possible. It causes some delay and sometimes also timed out errors.
agreed
my android keep going back and forth between umts 3G and hspda 3.5G like some clueless kid while 2 experienced guy (symbian & winmo) laugh at him
i know this is a old topic
i have still this issue
my phone is switching to hsdpa an back to 3g after a few seconds
when the phone is connected to my slow wifi connection everything works fine and i can use it for 3 day's
when it is connected to hsdpa my battery is empty after 15 hours and the voip connection is not working properly (i need to start a ping to some server first to keep the connection alive so i can call with voip)
I just came upon this thread, but I don't have this problem, so I can't really test it out this theory. But my thought was, what if you just went into the build.prop file and edited the ro.ril.hsxpa.category settting from ro.ril.hsxpa.category=2 to ro.ril.hsxpa.category=0. I just tested it out and it never jumped from 3g to H. My only concern is that you wouln't get the fastest speed you could be getting. Test it out and let me know though.
at this moment it is not posible to root my phone (SE Xperia pro with latest firmware)
so i am afraid we need to wait to test this
but thanks for the hint