The(mega) problem with the phone dialer - Touch2 General

After the phone conversation does not turn off the dialer(DialPad).
Does not respond to button Back.Disabling the dialer only possible by X.After a soft reset everything back to normal in the first made the call.How to fix it?
Greetings

When soft reset does not work try a hard reset.....but back-up your phone first......

Thanks, it solved but the reason is a problem with the Back button, which will describe in another thread:Back Button problem

Related

navigation buttons up/left/enter stopped working

Hi,
I've a Qtek S110. Last saturday it did a hard reset, while it was in my pocket.
Now the up, left and enter (middle) buttons of the navigation stopped working. down and right work as usual.
I tried..
- install the latest usable roms (1.12.00 WWE / R1.13.00 / E1.12.550WWE).
- searching the register
It may be a hardware issue, but further its working as usual.
Is there a way to solve this? should i try to open it and clean the button contacts (if there are any?)
It could be that during the hard reset those buttons were pushed, since it was in my pocket. Than it is a software issue right?
Anybody any light on this issue?
A ROM update is followed by a hard reset which should clear out anything software related.
I only had the back cover removed so I dunno whether further opening the front would help. :?:
Well it could be a software issue.
There are also problems with hard resetting and sound, if the earphone is plugged in (search for no sound).
Then the device 'remembers' the status of the earphone not correct. So maybe the buttons were pressed during hard reset, and the device remebers the button status?? just guessing...

Keyboard backlight off too quick

Hi guys,
I'm very new to pda's/smartphones 'n stuff, so be gentle.
I have a Touch Dual since few days, and the one thing that irritates me is the keyboard backlight. When typing an sms the lights go off just after 8 seconds or so... That's too fast for me, I still have to get used to having a qwerty keypad on my phone.
to be clear: I don't mean the backlight on the display itself, buy the light beneath the keypad when open.
Is there a registry setting, or a tweak/application that could correct this for me?
Thnx in advance,
Lukas
same problem here...
You could try the most excellent KaiserTweak, I've found most of its tweaks to be compatible with my Nike, haven't tried the backlight though -> http://www.jongma.org/KaiserTweak/
yes try the kaiserTweak. it's under option Keyboard->backlight. The default value is 10 sec. you can up the time to more in the tweak.
Downloaded the tweak app, changed the keyboard setting and a bunch of other interesting settings (because I'm a curious idiot in case someone asks) and now the device kind of hangs on the password screen... I can't unlock anymore.
The device reacts to taps and both screen and keypad input. Also, if I type the wrong password I get the obvious error message. If I type the correct passcode, and tap 'unlock' then nothing happens and after a minute or so the * disappear and I can start over again..
Is this a known bug?
What do I do now? Hard reset? That will wipe out all my settings and files right?
Thnx
Lukas
please help... Hard reset did not help. Device is still unresponsive...
This are the numbers I get when the device is booting:
M 04
B 04
R 1.58.16.27
G 25.61.30.03H
D 1.31
just want to make sure you did your hard reset correctly. how did you do it exactly? the button by the battery after you remove the back cover?
I took this from the manual because from what you described. doesn't sound like you did it correctly. a hard reset should put it back to its factory setting.
Hard reset
You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings -‑ the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain.
To perform a hard reset
1. Press and hold the TALK and END buttons, and at the same time, use the stylus to press the RESET button at the left side of your device.
2. Release the stylus, but continue pressing the TALK and END buttons until you see the following message on the screen:
This operation will delete all your personal data, and reset all settings to the manufacturer default settings. Press ENTER to restore manufacturer defaults, or press any other button to cancel.
3. Release the TALK and END buttons, and then press ENTER on your device.
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
Hi Fatlove...
Indeed you're right. And I did read my manual. And I did it EXACTLY like stated in the manual.
This is what I posted in the General forum:
Ok,
This is going to be stupid, but I'll admit to it anyway...
I've read in the manual on how to perform a hard rest. It states to push the send and end buttons, keep the pushed in, and then press the soft reset button until a text appears on the screen. That text states to press "Enter" to continue, and any other key to cancel.
Well, the 'Enter' key to me is the 'enter' key on that qwerty keypad, not the shiny silver button between the Send and End buttons.
To the writer of the manual the enter key on the keypad does not exist.
So that's why a hard reset did not help. Because I did not perform one.
My bad. Anyways, my phone is ok again, sorry for the doublepost.
Grtz
Lukas
Anyways, thnx for the reply, and for the record: the keypad backlight still doesn't work after har reset and re-applying the keiser tweak. Still lit only 8 seconds or so. Does it matter that I copied the Keiser executable to my storage card? It doesn't have to be on the device itself now, does it?
Thnx again.
Lukas
Nope.. kaisertweak is not working for this property (Keyboard backlight)
Anyone
I tried several Registry settings but nothing worked so far.
Anyone else had succes?
Still no solution for this problem?
It's pretty annoying
I tried changing values in the registry as well, but nothing worked. So I'm also interested in a possible solution...
Damn, I hate that light turning off that quick. There must be a solution
I also have been trying a lot of registry settings without solutions
Anybody knows?
I tried this kaiser tweak on my dual and it had no effect. Had to remove it.
kaiser tweak had no effect on my dual either..
qwerty key board
hello i have the htc touch pro and my external keyboard light go's off in about 3 sec does anybody now how to get the time longer
I've the same problem, keyboard backlight stops after about 8 seconds
I tried some register settins and also with Advanced Configuration Tool (Julien Schapman), but no result.
Hope somebody can fix this

Serious problem... cant answer incoming calls!

I think its a software bug... Its really annoying if someone calls me and I cant accept the call My ringtone just keeps ringing and I just can stupidly look on the screen without answering :S I push the green "answer" button but the call doesnt accept. I neither can use the red "ignore" button. This problem gets solved with a reset but happends again after a short time.
Is there any solution for this´? Is there any possibility to accept the call trough the touchscreen?
Please help me I am really desperate!!!
Thanks in advanche.
Uhhmm.....i guess you know that you have to 'slide' the button to the green field if you wanna answer...not 'push' the green spot.
Anyways...you can also use the (physical) buttons of the phone to answer or disconnect.
I think you missunderstood me. I actually mean the physical buttons! They arent working anykind. Normally if I press the green "dial/answer" button the dialer application appears right? But it dont! After software resetting it does again somehow for short time. And if I get a call then I press the physical button but the call doesnt accept. It just keeps ringing further. There is no chance to accept the call. And there is no option to accept the call trough the touchscreen.
Indeed, i misunderstood..sorry!!
If the buttons didn't work at all, i would be thinking of a hardware problem, but since you can solve it for a short while with a soft reset.....i'm not so sure of that.
You still have the option of a hard reset, you could give it a shot, just to be sure(Remember to back up your stuff ).
Otherwise send it in for warranty...presuming you still have it.
Thanks for the reply!
I dont think its a hardware problem because the buttons are working again somehow after a software reset. But the problem happens again some time later
Sending it to warranty is no choice since I always got trouble with my warranty!
My old touch had an software problem and couldnt boot so i send it to the warranty and they just send it me back with no repairs claiming that the warranty gets lost if I connect my device with a computer :S
Anyway i hope there is a solution without hardware resetting
Just a thought....
Did you install any locking software which locks the device fully? It may be the one preventing you from answering calls...
HTH...
No I didnt install anything kinda like that. Is there a dialer replacement I could use instead?
I have also noticed this bug on my Jade running the official 2.32 update from HTC:
When a cal is received, the phone rings but it doesn't display who is calling (the device keeps showing the home screen). This is not happening at every call, but I can't find what is causing this behaviour (it happens even after hard reset, so no additional programs running in the background).
Any ideas how to overcome this?

The mistery of the vanishing numeric keypad

I wish to know if other users may have encountered this minor problem ...
It happens from time to time that after pressing the left "telephone" button or soft-key, the numeric telephone keypad DOES NOT appear (i.e. it is impossible to compose new telephone numbers). The middle softkey does not work in these cases. A soft reset has sofar always fixed the problem. I have tried many possible solutions, but this problem always come back, usually 1-2 times a day.
Any help or advice?
Thank you very much
Paolo
Chickinox said:
I wish to know if other users may have encountered this minor problem ...
It happens from time to time that after pressing the left "telephone" button or soft-key, the numeric telephone keypad DOES NOT appear (i.e. it is impossible to compose new telephone numbers). The middle softkey does not work in these cases. A soft reset has sofar always fixed the problem. I have tried many possible solutions, but this problem always come back, usually 1-2 times a day.
Any help or advice?
Thank you very much
Paolo
Click to expand...
Click to collapse
it happens with windows build 6.5.x and it is the problem of htc dialer with windows mobile new builds, as far as i know there isn't any solution for it yet just soft reset ... correct me please if i'm wrong!
i use temporary solution which helps to recover dialer go on home... rotate landscape... rotate portrait and press call button and its there
Or you can just set the Phone App to auto rotate using something like BsBTweaks. That way it the phonepad messes up, you just tilt the phone one way and then back again and hey presto. Keypad back and working again.

when on a phone call screen lock

hello ive searched everywhere is there an app or tweak for hd2 im annoyed that when on a call i keep pressing the on screen buttons is there anything i can do to stop this thanks..
The light sensor on the HD2 should turn the screen off automatically so that you don't press anything. That being said maybe you have a problem with your sensor so make sure it works, if it doesn't then try flashing another rom or call HTC.
Hope this helps.
master reset
rugersrob said:
hello ive searched everywhere is there an app or tweak for hd2 im annoyed that when on a call i keep pressing the on screen buttons is there anything i can do to stop this thanks..
Click to expand...
Click to collapse
you try a master reset befor you anything bigger in your phone, sometimes is always very easy but since you can't find it just do a master reset.
start,-settings-security-factory reset hope this work
same problem here, hard reset didn't change anything.
maybe you want to try this (stops working after soft reset, until i re-install) or this (also doesn't work right for me).
maybe one of theses two works for you.
the last option would be to go to \Windows\Lockscreen and rename the "LS_PhoneCallScene_480x800.cpr" (brings back the default wm 6.5 lockscreen) and then lock the device (windows button --> lock) on each call.
This app can help you.
http://forum.xda-developers.com/showthread.php?p=52931285

Resources