HTC Magic: G-Sensor problem [Solved] - myTouch 3G, Magic General

Hi all,
First sorry for my English.
Since I upgrade my phone to new radio, and use Sense UI, G-Sensor don't work more. I have flashed some ROMs: Offcial ROM with Sense UI for Magic (Singapore, Euro), custom ROMs such as: 3pei_hero_2.1, CursorSense32A-1.2.6.1, and the current ROM is Smoki 0.6.1. But they get the same problem: G-Sensor do not work.
I have tried clear rotato setting using recovery, and then calibrate G-Sensor, but the result is "Calibration aborted".
It have worked when I use old radio, with a HiAPK ROM. So, I think may be new radio make G-Sensor disable. The current my radio is 6.35.08.29.
Does anyone have a solution for my problem?
Thank you very much.

try to wipe g-sensor data in recovery. it helped me once....

Thank you for your fast anwser.
I have tried to wipe "rotato setting" in recovery (I use recovery-RA-hero-v1.6.2), then calibrate G-Sensor (in Settings -> Sound & Display), but it don't solve my problem.
If my way can't wipe G-sensor data, can you show me how to wipe G-sensor data?

hm - then it's bad, wipe rotate settings is exactly what i meant
did you already try to (re) wipe everything else, reflash the rom etc.?

I have tried this method: http://forum.xda-developers.com/showpost.php?p=6519036&postcount=48, but it isn't effect for my problem.
As I say, I have flashed 3 custom ROMs, before flashing a ROM I have wiped: data/factory reset, Dalvik-cache, and rotate settings too.
Once, I have tried to reset all by turning phone off, then press Home + Back + Power, and reset phone, but it is not effect too.

You could try what i said in step #1
http://forum.xda-developers.com/showpost.php?p=6319621&postcount=1
Try to dig up your old akmd files (if you have a nandroid backup). If that fails you can try with mine attached to the post.

Hi, I think you method can help me, but with other akmd file.
My phone have no any akmd file. When I move phone, rotate phone, the Bubble don't move.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When I copy your akmd files to /data/misc, it change a little, but calibrate still aborted.
I see someone talk about rild* files, Do I need these files?

[Problem have solved]
Wow, I have found a solution for my problem.
I have tried to replace akmd with an older version, and it really work for me.
Many thanks to padde0711 and all people have tried to help me. I play Teeter now

Mod. edit: not dev related, moved to general

Related

need help i900 problem!!!

hello sir
i have big problem
my i900 power on but no network, always show cross to tower
[i think not detect sim].
and if i want to see imei it show "the phone is currently off.would you like to turn on the phone?"
then option yes/no but if i press yes not happean any thing.
if i try to reset phone by setting>system>hard reset> there is 2 memory
1>main memory ( reset tap is enable)
2>my storage (not enable reset tap)
if i try main memory reset it need password 1234 i enter 1234 then it show this error "when phone is turned off,you cannot hard reset.turn phone on,and try again"
key combined hard reset not work. soft reset work but same.
please ! please !! please !!! need help.
how to revive this phone normolly???
Did you mess around with radio rom (phone.bin)?
Try to reflash it with COMPLETE (phone,pda and csc) new ROM, official
if possible.
You said:
"key combined hard reset not work."
That part of device function (battery charging also) is controlled by phone
part of ROM (phone.bin), so, it seems that problem is caused by faulty phone.bin.
Reflash it!
rtomakov said:
Did you mess around with radio rom (phone.bin)?
Try to reflash it with COMPLETE (phone,pda and csc) new ROM, official
if possible.
You said:
"key combined hard reset not work."
That part of device function (battery charging also) is controlled by phone
part of ROM (phone.bin), so, it seems that problem is caused by faulty phone.bin.
Reflash it!
Click to expand...
Click to collapse
thank you for reply but i am new about this.
can you give me COMPLETE (phone,pda and csc) new ROM, official ???
and how to ???
thanks.
Look here fore official ROMS:
http://www.samsungmobile.com/support/omnia/index.jsp
Manuals about flashing omnia (good ones) you should search on modaco
web site. They have very good omnia support.
Short version: install activesync, all drivers for omnia and run .exe of firmware update from PC.
install active sync 4-5,
install modem driver.
restart pc
but it hang on this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
i use on xp[32 bit]
how to solved??

i5800 G-sensor calibration. Please help!

Hello! I'm writing about a problem I have with my i5800. I'm on Froyo 2.2 XWJPM. On the phone of course there isn't a calibration tool. I cannot for the life of me calibrate the g-sensor of the phone, which is a little off in the pitch parameter. I have tried almost everything:
1) Play and change settings in the akmd_set.txt file in data/misc. Also tried deleting the file. The g-sensor just ignores the settings in the file
2) /system/bin/sensorcalibutil_yamaha wont run. Not even after deleting /data/system/ms3c_yamaha.cfg. Also tried editing the file. Nothing. (I am root of course)
3) Tried with other firmware (e.g. XXJPM) again nothing.
Note: Calibration seems to work fine in utilities like GPS Status. However I need a way to calibrate the phone globally, and not just one app.
Thank you!
icyblade said:
Hello! I'm writing about a problem I have with my i5800. I'm on Froyo 2.2 XWJPM. On the phone of course there isn't a calibration tool. I cannot for the life of me calibrate the g-sensor of the phone, which is a little off in the pitch parameter. I have tried almost everything:
1) Play and change settings in the akmd_set.txt file in data/misc. Also tried deleting the file. The g-sensor just ignores the settings in the file
2) /system/bin/sensorcalibutil_yamaha wont run. Not even after deleting /data/system/ms3c_yamaha.cfg. Also tried editing the file. Nothing. (I am root of course)
3) Tried with other firmware (e.g. XXJPM) again nothing.
Note: Calibration seems to work fine in utilities like GPS Status. However I need a way to calibrate the phone globally, and not just one app.
Thank you!
Click to expand...
Click to collapse
I found this app called sensor tester!! havent used it but you can try!!
All the best
here is the QR Code.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
neo1691 said:
I found this app called sensor tester!! havent used it but you can try!!
All the best
Click to expand...
Click to collapse
I need something to calibrate the g-sensor not only to view the sensor data (which already can be done with *#0*#). But thanks anyway
icyblade said:
I need something to calibrate the g-sensor not only to view the sensor data (which already can be done with *#0*#). But thanks anyway
Click to expand...
Click to collapse
Bad luck
Acid lestitious 2.0. Fugumod 2.2

[ROM] Huawei u8650 GGR Next Gen

So here is the New Rom for your Huawei U8650.
The Rom was tested for 3 weeks and so far has no bugs, the rom is fast and stable, it's based on 2.3.5 Huawei rom, with OC kernel up to 780MHz, it also have app2sd.
I has 360 launcher added so thanks to the original uploader
I assume that everybody knows how to root and custom recovery the U8650 if not just search my other post.
Note: YOU FLASH AT YOUR OWN RISK. I'M NOT RESPONSABLE FOR ANY DAMAGE TO YOUR DEVICE.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To Install:
1) Boot in recovery
2) Wipe data/cache/dalvik
3) Partition SD 128 Ext and 64 Swap (Partitioning SD erase data on SD, so BACKUP)
LINK:
http://www.mediafire.com/?texsqsoa9pa4vp2
If you like my work buy me a beer
Not for me
Unfortunately when I try this on my U8650, I get
Code:
E:signature verification failed.
What am I doing wrong ?
qong said:
Unfortunately when I try this on my U8650, I get
Code:
E:signature verification failed.
What am I doing wrong ?
Click to expand...
Click to collapse
What recovery do you use???
Thanks for your response.
I'm a complete newbie.
I'm not sure, how do I find out ?
All I did was install the standard ROM by downloading it, copy it to the sd card and restarting whilst pressing Vol+, Vol- & the power button on my U8650.
Then I rooted it by restarting whilst holding down Vol+ & Power and then selecting the root.zip.
After that I tried the same with your zip !!
That's all I've done since I've had the phone.
OK, not so much of a newbie anymore.
Managed to install a CWM and then your ROM
Seems a bit slower. But it's beautiful.
Xiexie ni
Volume
how increase volume like cyanogenMod
Weather widget
How can I change the weather widget to a european city ?
When I try to change the location, it only seems to recognize chinese.
Problem with mobile networking
Hello i have encountered only 1 problem with your rom (or is it my mistake?) and it's about mobile internet.I can't get it to function ... It can find all available and says it has registered on the one I want but then there's no internet...some1 pls help
Hi,
I had a similar problem.
Eventually, I figured out that I had to manually add the APN.
This is done in
Setting - Wireless & Networks - Mobile networks - Access Point Names
Hope this helps.
damn i knew it was about that..but idk how to set up an APN i'm kinda new to all this(tele2 croatia)
nvm i did it ty ery much

[Q] Camcorder not working on Epsy CM9

This is from one of my posts on the CM9 thread here.
I'm still having problems with video recording.
I tried making a 2:10 video just now, after a full phone wipe (factory reset) then installing this.
The camera FCd and in the gallery it says - "This Video cannot be played"
It's really annoying because I actually use my video camera, when I can..
It's not the camera app because I've used different applications and they say "Cannot access camera" after around 40s.
Defy Red Lens running latest build.
--------
Does anyone know why this happens? Or have any solution to it.
I have enabled full HWA (in the most recent update).
Process when installing the ROM:
Wipe data/factory reset
Wipe cache/dalvik
Install the rom (5 july from here)
Install Proximity Sensor Disable (this disables screen turning off when a call is made, for one thing).
Install Pottkopp's AIO Aroma installer for CM9 (Apex + rest don't change)
Wipe cache/dalvik
Reboot
Just incase I'm doing anything I shouldn't
Anyone know anything?
Try going to Apps and find Camera app.
Select Clear data from there.
Has helped me sometimes.
AROMA-Installer could also be the problem.
When installing new rom just:
Wipe cache partition or when big changes or everything goes wrong Wipe data/factory reset
Wipe Davik Cache
Install Rom
Reboot
There are just some options in Settings to disable screen rotating.
MTurn said:
Try going to Apps and find Camera app.
Select Clear data from there.
Has helped me sometimes.
AROMA-Installer could also be the problem.
When installing new rom just:
Wipe cache partition or when big changes or everything goes wrong Wipe data/factory reset
Wipe Davik Cache
Install Rom
Reboot
There are just some options in Settings to disable screen rotating.
Click to expand...
Click to collapse
Edit: Sober now.. fixing this up lol.
OK, I'll try skipping the AROMA installer next time I install.
Thank you! It must have been the Aroma.. I just tried a minute video and it worked!
I'll try a 5 minute one just in case, and see if that saves
Diamonds for you *minecraft forum reference
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit: longer videos aren't working :/
Still not working btw :|

[Q] Seems like phone is hanging while ROM installation

Hi,
I followed carefully all instructions for ROM installation from this thread:
http://forum.xda-developers.com/showthread.php?t=2059651
All went fine until ROM installation. I have chosen rom (zip) file and pressed install.
You can see what happends here:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
when I turn on some more logging I get this message:
e: opening /res/keys: no such file
Click to expand...
Click to collapse
I re-dowloaned this rom again and it did not help.
I tried 3 more roms and always there is same situation.
PC says that Phone drivers are upto date.
There were NO errors in the meantime.
I have re-installed CWM but it did not help either.
Someone has any ideas about it?
regards
katwit
Sorry, but what do you mean by this? not installing? not booting? or what ROM you used?
Hi IPlasm
iPlasm said:
Sorry, but what do you mean by this? not installing? not booting? or what ROM you used?
Click to expand...
Click to collapse
If you see the photo with rom installation screen - it hangs on that screen. So i think it is not installing what also causes not booting
I tried first 3 from
http://forum.xda-developers.com/showthread.php?t=2043917
Regards
katwit
katwit said:
Hi IPlasm
If you see the photo with rom installation screen - it hangs on that screen. So i think it is not installing what also causes not booting
I tried first 3 from
http://forum.xda-developers.com/showthread.php?t=2043917
Regards
katwit
Click to expand...
Click to collapse
So you have tried the latest ROMs,
after "opening package" written, you should be able to see "Installing..." with Title "Phonerty" on my ROMs. and at least it just takes 5 minutes.
If not shown, then the Zip must be corrupted while downloading or your SDCard can be unclean or damaged microSD, try to format your SDcard FAT32. or you can even Partition that will format your SDCard in the Recovery on your Phone!, go Advanced and partition, after completing that, you can copy your ROM zip files via USB at recovery Mount options.
after installing, you must Installation completed... then Manually restart your phone.
Have a nice try
Worked!
Dear iPlasm!
Many thanks - it works fine. Many thanks again!
regards
katwit

Categories

Resources