When I'm on a call the screen is dead to the touch. I cant end a call or change to speaker phone nothing works. Any ideas?
Thanks
do you have a custom rom or a stock rom?
& have you tried to reflash that rom or flash a new rom? It might just be a bug within the Rom you are running.
Are you using the stock WinMo dialer, or the HTC?
You might have something stuck on/a hell of a smear over your proximity sensor. Try cleaning it up a bit.
If you are using BSB Tweaks and you have Tap Time enabled that can cause issues. Try turning that off.
speoples20 said:
If you are using BSB Tweaks and you have Tap Time enabled that can cause issues. Try turning that off.
Click to expand...
Click to collapse
+1...most common solution for those symptoms.
It worked
speoples20 said:
If you are using BSB Tweaks and you have Tap Time enabled that can cause issues. Try turning that off.
Click to expand...
Click to collapse
oo thx for that tip
speoples20 said:
If you are using BSB Tweaks and you have Tap Time enabled that can cause issues. Try turning that off.
Click to expand...
Click to collapse
thanks, did not know what the feature was set for when I was looking at BSB Tweaks.
i had the same issue....it was tap time as well
Fixed it guys Thanks
Related
I don t know if this topis is here but i would like to know if it is possible to make somehow turn off display when i call someone, and after I hang up Leo will wake up. It would work on gyroscope, it exists? Thanks for answers
Tweak?
spasitelko said:
I don t know if this topis is here but i would like to know if it is possible to make somehow turn off display when i call someone, and after I hang up Leo will wake up. It would work on gyroscope, it exists? Thanks for answers
Click to expand...
Click to collapse
I believe you should try searching in tweaks and hacks...
There is one i have been using for few days its: Display Switch
Just by clicking it, the display screen goes off.
Hope that helps...
your answer is here: http://forum.xda-developers.com/showpost.php?p=5858246&postcount=1485
spasitelko said:
I don t know if this topis is here but i would like to know if it is possible to make somehow turn off display when i call someone, and after I hang up Leo will wake up. It would work on gyroscope, it exists? Thanks for answers
Click to expand...
Click to collapse
supermaster said:
I believe you should try searching in tweaks and hacks...
There is one i have been using for few days its: Display Switch
Just by clicking it, the display screen goes off.
Hope that helps...
Click to expand...
Click to collapse
Any chance you could turn the Red and capital emphasis OFF?
When I see it in your posts I now immediately hit the back button and read someone elses!
When I'm on a call my phone screen is locked up. I can't do anything. I cant conference a new call our even end a call. the keypad option does not work either. I need to press the power button to end a call. the only thing that works are the physical buttons.
I'm currently running stock rom with cookie and s2u2.
Btw, I love the swype input method.
Thanks in advanced.
Do you have BsB Tweaks installed by any chance? The increase tap time option on there will do that to the phone, you have to disable it.
xeebot said:
Do you have BsB Tweaks installed by any chance? The increase tap time option on there will do that to the phone, you have to disable it.
Click to expand...
Click to collapse
Or if you have anyone apps that changes the screen from portrait to landscape will make your phone screen lock, at least on my phone it does.
I do haveu BsB tweaks installed and I activated increase tap time. I disabled it and reboot and now it works again.
thanks xeebot and dukins for the help.
done!
This should be locked since it has been solved. or give it a solved tag
xeebot said:
Do you have BsB Tweaks installed by any chance? The increase tap time option on there will do that to the phone, you have to disable it.
Click to expand...
Click to collapse
I was having the same problem; your suggestion worked for me, too.
Thanks,
Angelo
Anyone know how to disable the vibrate feature every time you tap a button? I don't seem to have that option in my T-mo HD2...Tj
TrekkerJmm said:
Anyone know how to disable the vibrate feature every time you tap a button? I don't seem to have that option in my T-mo HD2...Tj
Click to expand...
Click to collapse
Settigns tab - personalize - vibration (and I only know because I stumbled across it last night )
sirphunkee said:
Settigns tab - personalize - vibration (and I only know because I stumbled across it last night )
Click to expand...
Click to collapse
Hmm My T-mo doesn't have that option ...anyone else know a reg edit? or send me the .exe so I can put it on the phone?...Tj
TrekkerJmm said:
Hmm My T-mo doesn't have that option ...anyone else know a reg edit? or send me the .exe so I can put it on the phone?...Tj
Click to expand...
Click to collapse
Really, in a stock ROM That's what I'm running...
Is there no personalize option on your settings tab, or no vibration option in the personalize screen...?
sirphunkee said:
Really, in a stock ROM That's what I'm running...
Is there no personalize option on your settings tab, or no vibration option in the personalize screen...?
Click to expand...
Click to collapse
Nope..Not at all...Tj
TrekkerJmm said:
Nope..Not at all...Tj
Click to expand...
Click to collapse
Ok this one is gonna drive me batty until I figure it out
(Pardon the questions, just want to be sure)...Are we talking about the same thing, the "Settings" tab in Sense, not the "all settings" screen (the WM settings group that looks like the start menu)..?
And, when you're on the settings tab, are you sure you're scrolled all the way to the top of that list?
How in the world does my stock ROM have it there, and yours doesn't??
MINE DOES
sirphunkee said:
Ok this one is gonna drive me batty until I figure it out
(Pardon the questions, just want to be sure)...Are we talking about the same thing, the "Settings" tab in Sense, not the "all settings" screen (the WM settings group that looks like the start menu)..?
And, when you're on the settings tab, are you sure you're scrolled all the way to the top of that list?
How in the world does my stock ROM have it there, and yours doesn't??
Click to expand...
Click to collapse
I am running the Stock ROM as well and it is exactly as you stated sirphunkee! These guys must be a little confused. That is the first thing I stopped. It saved a lot on battery life.
HERE IT IS AGAIN. START/SETTINGS/PERSONALIZE/VIBRATION!
If I knew how to track registry changes in real-time, I'd just change the setting and see what change gets made as a result. But, I don't
sirphunkee said:
Ok this one is gonna drive me batty until I figure it out
(Pardon the questions, just want to be sure)...Are we talking about the same thing, the "Settings" tab in Sense, not the "all settings" screen (the WM settings group that looks like the start menu)..?
And, when you're on the settings tab, are you sure you're scrolled all the way to the top of that list?
How in the world does my stock ROM have it there, and yours doesn't??
Click to expand...
Click to collapse
OK I looked again and found it, boy do I feel dumb I didnt even realize I could scroll up lol...thank you very much...Tj
TrekkerJmm said:
OK I looked again and found it, boy do I feel dumb I didnt even realize I could scroll up lol...thank you very much...Tj
Click to expand...
Click to collapse
*whew* I'm glad we got it figured out!
Don't feel bad...we all have an "oh, duh" moment on here now and then
Can anyone help me out in turning off the vibrate on the keyboard aswell? I don't have an HD2 it's for a friend.
Just have you friend follow the instructions above:
Settings>Personalize>Vibration
p_synthesis said:
Just have you friend follow the instructions above:
Settings>Personalize>Vibration
Click to expand...
Click to collapse
this only takes the vibration out of the htc keyboard but not swype under the 2.13 updated tmous rom.
any one know how to disable vibration from Swype?
ryan562 said:
this only takes the vibration out of the htc keyboard but not swype under the 2.13 updated tmous rom.
any one know how to disable vibration from Swype?
Click to expand...
Click to collapse
Yeah Swype keeps right on shakin.
ryan562 said:
this only takes the vibration out of the htc keyboard but not swype under the 2.13 updated tmous rom.
any one know how to disable vibration from Swype?
Click to expand...
Click to collapse
Yeah I can fix that! Here you go!
Hit the keyboard so swype comes up.... Hit the "SYM" Key, then hit the shift key/the arrow pointing up/then hit OPT then you will see it listed and uncheck! BINGO!
Thanks
toreone said:
Yeah I can fix that! Here you go!
Hit the keyboard so swype comes up.... Hit the "SYM" Key, then hit the shift key/the arrow pointing up/then hit OPT then you will see it listed and uncheck! BINGO!
Thanks
Click to expand...
Click to collapse
Thanks that worked!
avalst said:
Thanks that worked!
Click to expand...
Click to collapse
ditto! haha
Sir Phunk have you seen anything on the boards about disabling or turning off vibration during call waiting? I'm running Core Cell V3 ROM and when you are in a call and get another the handset vibrates which 1.) Isn't pleasant to your ear, 2.) Whoever you are talking to can hear it really loud. Figured you might now, thanks ahead of time...
Nevermind, found it on the boards
I have another question related to vibration on the HD2. This has been asked before, in another thread, but has anybody found a solution to the stuck vibration issue? I usually get it from time to time through e-mail notification vibration. It will vibrate in pulses 3 times. On the third time it will hang until I press a hard button. This is very annoying, and I have disabled the notification vibrate for now.
thuddome said:
Sir Phunk have you seen anything on the boards about disabling or turning off vibration during call waiting? I'm running Core Cell V3 ROM and when you are in a call and get another the handset vibrates which 1.) Isn't pleasant to your ear, 2.) Whoever you are talking to can hear it really loud. Figured you might now, thanks ahead of time...
Nevermind, found it on the boards
Click to expand...
Click to collapse
Honestly, no, I don't know off the top of my head where that setting is, I might have guessed in the notifications settings? I'm curious to hear what you found out...
So I've searched through the threads and there doesn't really seem to be an answer for this other than to use something like widgetlocker, which I don't really want to do because I would like to still be able to use the music player controls from the lock screen. I'm just so annoyed by the haptic feedback every time I want to unlock the phone!
Does anyone know of any way to disable this?
btw Running Azure 1.0.1
Same here. But sometimes, if there is no answer in search means the problem can be solved easily... But I'm still finding the answer too
Go to: Menu - Settings - Security, then uncheck the "Use tactile feedback" option. Hope this is what you need.
@Rapier - yeah, I tried that but unfortunately all it does is disable all haptic feedback except for when unlocking the phone :S
Anyone have any ideas?
have been looking for this too a while ago and i have found this in the hero forums:
http://forum.xda-developers.com/showpost.php?p=6521199&postcount=174
I haven't had the time back then to test it out myself so i don't know if it will work
el.dizzee said:
@Rapier - yeah, I tried that but unfortunately all it does is disable all haptic feedback except for when unlocking the phone :S
Click to expand...
Click to collapse
Strange. For me it works exactly as it should. Is disabling the feedback only for the unlock pattern, on the other keyboards, dialer and so on, haptic feedback is still present.
Are you using stock or custom ROM? I recall you've said something about Azzure. Maybe this is the issue. I'm using stock ROM and have no problems disabling through the way I told you.
Rapier said:
Strange. For me it works exactly as it should. Is disabling the feedback only for the unlock pattern, on the other keyboards, dialer and so on, haptic feedback is still present.
Are you using stock or custom ROM? I recall you've said something about Azzure. Maybe this is the issue. I'm using stock ROM and have no problems disabling through the way I told you.
Click to expand...
Click to collapse
Ohhh ok yeah I guess that's the problem there. I'm running Azure 1.0.1 and unfortunately there does not seem to be any option on my ROM to disable the haptic feedback for the lockscreen as it uses the vanilla lockscreen, for which I believe there was no option to remove haptic feedback. But yes, I do recall being able to turn it off when I was running a stock ROM.
Well, that's a bummer, but thanks anyway!
matn013 said:
have been looking for this too a while ago and i have found this in the hero forums:
http://forum.xda-developers.com/showpost.php?p=6521199&postcount=174
I haven't had the time back then to test it out myself so i don't know if it will work
Click to expand...
Click to collapse
Hey thanks! This looks like just what I need! I read through the thread and it doesn't seem like it's all too stable but I suppose it's worth giving a shot
I installed the froyo beta, and ever since then, my phone won't auto rotate anymore. Ive already ODINed back to stock, it still wont work Any ideas or help?
-Edit-
I downloaded Accelerometer Test to make sure that the accelerometer wasn't busted. It's working fine. The phone just will not rotate.
Only two things I can think of:
1: Go to settings > Sound and Display > Make sure Orientation is checked.
2: (If using Launcher Pro). Menu button while on homescreen > Preferences > Behavior Settings > make sure Enable Auto-rotation is checked.
Other than that, no idea :\
SemiGamer said:
Only two things I can think of:
1: Go to settings > Sound and Display > Make sure Orientation is checked.
2: (If using Launcher Pro). Menu button while on homescreen > Preferences > Behavior Settings > make sure Enable Auto-rotation is checked.
Other than that, no idea :\
Click to expand...
Click to collapse
Its on, and i even toggled it. And no launcher pro. Just flashed stock
spitefulrain said:
Its on, and i even toggled it. And no launcher pro. Just flashed stock
Click to expand...
Click to collapse
On stock, the homescreens wont rotate unless the keyboard is slid out.
Is it rotating on the browser and on pictures?
SemiGamer said:
On stock, the homescreens wont rotate unless the keyboard is slid out.
Is it rotating on the browser and on pictures?
Click to expand...
Click to collapse
No. And if i slide the keyboard out, it rotates. But then it gets stuck in landscape unless i go to something that forces portrait mode, such as the home screen.
spitefulrain said:
No. And if i slide the keyboard out, it rotates. But then it gets stuck in landscape unless i go to something that forces portrait mode, such as the home screen.
Click to expand...
Click to collapse
Ah if its even getting stuck in landscape mode than its got to be something framework or .apk related.
Beats me, sorry man :\ Hope someone is able to help you more so than I could.
SemiGamer said:
Ah if its even getting stuck in landscape mode than its got to be something framework or .apk related.
Beats me, sorry man :\ Hope someone is able to help you more so than I could.
Click to expand...
Click to collapse
Im downloading a new copy of the DI18 for ODIN, hope it helps. Thanks anyway. If not i guess its time for my first replacement ever.
spitefulrain said:
Im downloading a new copy of the DI18 for ODIN, hope it helps. Thanks anyway. If not i guess its time for my first replacement ever.
Click to expand...
Click to collapse
please let me know if you find a solution. i have the exact same issue, caused the exact same way...
Wipe /data.
go to horizontal calibration in display settings on the froyo rom lay your phone on a level surface horizontally calibrate it and should work it did for me!!!!!!!!!!!!!!!!!!!!!!!!!!!
wcheek226 said:
go to horizontal calibration in display settings on the froyo rom lay your phone on a level surface horizontally calibrate it and should work it did for me!!!!!!!!!!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
on which rom did you do this?
also, firon, wipe/odin, nothing works
found a solution:
"Originally Posted by tmspyder
I was able to recalibrate my g sensors as follows ..
This worked for me but I'll take no responsibility if it mucks something else up
1. Download a terminal app from the market
2. Enter one line at a time.
su
/system/bin/sensorcalibutil_yamaha
3. Follow the onscreen directions, while making sure you device is flat.
pay attention to the bump at bottom on back.
I hung said bump off the edge of table
I preformed this AFTER flashing to stock and then flashing my former ROM.
So it was not done in 2.2"
THANK YOU TO: tmspyder
Blush
THANK YOU TO: tmspyder
Click to expand...
Click to collapse
Your Welcome
Original source of the solution
smartanuj.com/samsung-galaxy-s-troubleshooting-and-optimizing-guide
Im not yet allowed to post links sorry
deleted post please ignore this inkspot
THANK YOU! I had the same problem and this fixed it. Of course, i had to root my shizzle again. By chance did anyone with this problem run the Froyo 2.2 built-in calibration before this came about?
Oh wow, thank you so much!! The fix using the terminal emulator totally worked for me too, I thought I was going to have to go back to stock to see if it would fix itself! After running the lines in the terminal, it still wouldn't automatically detect orientation, so went to the display settings, unchecked orientation, and checked it again, and now works perfectly! The lack of orientation was so frustrating, especially after using the keyboard and the only way to fix it was turning off the screen... thanks again!
Does this increase the speed of rotating in froyo beta cuz i noticed the rotating is really slow
Sent from my SPH-D700 using XDA App
deano0714 said:
Does this increase the speed of rotating in froyo beta cuz i noticed the rotating is really slow
Sent from my SPH-D700 using XDA App
Click to expand...
Click to collapse
This helped for me. I was having the slow rotation problem as well. This fixed it. I didn't see results right away though. Took a few minutes and a restart to work
Sent from my SPH-D700 using Tapatalk
Just wanted to bump this. I had issues with auto rotation broken after going to DK28 and downgrading back to DI18.
I didn't test if it fixed it or not, however it did remove the annoying lag on DK28 when the screen rotates. Only reason I was downgrading
What terminal app did you use?
It says "su" is not found
Sent from my SPH-D700 using XDA App