Related
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Doesn't pressing the "End call" button for 2-3 seconds also lock the phone?
Regards!
I do understand what you're saying. I figured out something really basic just the other day, that is if your phone is locked or in sleep mode just pull out your stylus and it'll unlock and wake up.
Just 1 movement.
Sorry if this is really common knowledge and you already know this but sometimes we overlook the more basic functions on such a complex device!!
Cheers
DB
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
jon- said:
Power button into standby is a fine lock for me. Nearly impossible to accidently knock the power button to turn it back on.
Click to expand...
Click to collapse
Yep i do this too.
Press the power button mate, and it will lock the phone
I like how the phone unlocks when you take the stylus out but i didnt like how it locks the phone when you put the stylus back in, so i removed that function using the options in gyrator
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
matou25 said:
I have got TOUCH HD since 1week.
I haven't problem with touch hd like touch diamond.
it is in my pocket but the new phone canvas and the sensitive key prenve nt missing call.
for me no need s2u2 or pocket shield like diamond.
Click to expand...
Click to collapse
why my HD no "Phone Canvas"?
Jezwick said:
is there a registry option for disabling the unlock when the stylus is removed/falls out ????
Click to expand...
Click to collapse
I searched a long time for this, but I didn´t find a solution
Standby locking
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
surfaczer said:
I also "lock" my phone by sending it to standby with the power button. This seems to work realy good for me. The only problem is that the HD wakes up if someone is calling. So i often answer a call by accident. Does anyone know a way to deactivate the automatic wake up?
I tried the registry hack with autolocking but this doesn't work for calls either.
Click to expand...
Click to collapse
Have you tried HDTweak?
ScarySquirrel said:
Have you tried HDTweak?
Click to expand...
Click to collapse
Please explain
device lock
gt112 said:
Hi folks
I'm back again with some more dumb questions (bear with me - I'm Irish).
On my old Nokia, I could lock the phone by pressing 2 keys and hey presto, phone now safe!
With the HD, things seem a bit complex. Firstly, there's power managenent that controls how long the back light stays on for and how long the phone stays on for before going into stand by.
Q1. Is standby not another form of locking ? If so why not just press th epower button whenever you want to lock the phone and be done with it ?
Then there is the built in locking software that comes with the app.
Q2. Whats the problem with this? (i.e. long pressing the end key and choosing 'Lock the device'; Why do we even need S2U2 ?
Then there's S2U2 itself. The settings page is long and complex.
Q3. Is there a S2U2 manual anywhere ? (to explain some of those ambiguous settings)
Finally, and here is my most important question...
Q4. Can I use my HD like I used to use my Noika - i.e. press a key or 2 to lock the goddam phone an just be done with it ?
As it is, when I want to use my phone, I have to press the power button to take it out of standby, and then I have to slide the S2U2 unlock switch. Its a lot of hassle just to make a phone call.
Is it me? Am I that stupid? What am I doing wrong ? What am I missing ?
Click to expand...
Click to collapse
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
JPW said:
Hi try this small cab - cant remember where I got it from but it works!!
just install to device and then add into programs launch or start menu.
regards
jon
Click to expand...
Click to collapse
You're Irish too, I presume?
The other option is you attached a very small cab.
OOOPS forgot cab
have edited post now
Jon
Should the device lock when I put the stylus in? I get the impression from this thread that it should but mine doesn't?
Hi all,
I have decided to uninstall S2U2 and I don't want any other locking applications. However, is there is a way I can have the standard device lock activated with a short press of the power button?
Currently I am having to hold the 'End call' button until it locks, then turn the screen off with the power button.
Thanks
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
If you push the hang off button for more than 10seconds, it will be locked
No...
FetchBLN said:
If you push the hang off button for more than 10seconds, it will be locked
Click to expand...
Click to collapse
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Good tip: works for me!
By the way: you can configure what happens when you pres the "disconnect" button too.
Guys
Thanks for this thread. I am very confused when it comes to locking the phone. Can anyone tell me...
Does the built in device lock work well? Will it keep the phone locked when a call comes in ?
If so, then why do people use S2U2 or other third party apps? Also some people say that S2U2 drains the battery. Is this true? How does it drain the battery?
The HD tweak had the disadvantage that when the screen turns in 'shaded' state the device is also locked.
Then when unlocking the device the screen stays 'shaded'.
avimak said:
I don't know about your device...
On my HD you can press the end button and count until 3, and the device is locked
Click to expand...
Click to collapse
Maybe it takes you 10 seconds to count to 3.
I've finally got there with locking my HD... I had a S710 before the HD, and I liked the fact that on that I could hold down the "end call" button, and that it would lock the phone and turn the backlight off. The screen would then turn off completely after whatever time I had entered (2 mins I think). And on unlocking the device the backlight would turn on.
On my HD I have now disabled the device password, but enabled my PIN request, so that it secures the phone if it has been turned off completely. This means that I can now hold down the "end call" button for 3 seconds or so and it locks the device (requiring a 2-tap process to unlock, like the S710). I have also used the standard windows mobile settings (power) to have the backlight automatically turnoff after 30 seconds, and have used HD Tweak (setting 4.1) to autolock the device when the backlight turnsoff. The only problem is that when AutoLock happens using HDTweak, when I unlock it the backlight fails to turn back on, even once I have started using the screen. Any ideas on how to fix this?
Dave
chaosdefinesorder said:
I can't remember whether it's in HD Tweak or Advanced Config, but there's an option to automatically lock the keypad on screen turning off (both timed out or power button press I assume, but not tested) so you could try that?
Edit: instead of being lazy I actually looked it up - it's in HD Tweak, option 4.1; Lock -> AutoLock
Just tried it and it works, turn backlight off by short power press and it's locked a well as screen turning off!
Click to expand...
Click to collapse
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
james00000007 said:
I have a pin setup and use the short press of the power button to put the phone into powersave 0 whixh then outs the phone into pin lock after a short while
Click to expand...
Click to collapse
Hi,
Is this similar to an application my friend had on his iphone. Basically, when he needs to use the phone, he needs to put in a pin to unlock. I think the Nokia E61 has a similar feature.
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
Can u let us know how to u set it?
nikki-m said:
How about using Gyrator to lock the device? I have set it to lock the device and switch off the screen on inserting the stylus. Also, I have it set to unlock and switch the PDA on when the stylus in removed.
Simple. Works for me, anyway!
Click to expand...
Click to collapse
i hav a qns, at the locked screen, when u rotate ur device, does the screen rotate as well???
i had tis problem whn using gyrator to lock, whn its lock at home screen, the screen wil rotate if i rotate my device. how to disable that???
davehodgkinson said:
Just to confirm my above question regarding this specific feature of HD Tweak... I have got this working on my HD now too, but when it autolocks, and I unlock it, the backlight doesn't turn back on, and the only way to make it turn back on is to hardbutton off and on the device (not power-off, just press the button the top of the phone and press it again).
This is stopping me from using the HD Tweak autolock now, which is annoying because it does precisely what I need! Can anyone offer any advice?
I've just realised that it actually says within HD Tweak itself (on 4.1 option selector) that this is a known issue... any idea on if and when it will get fixed?
Click to expand...
Click to collapse
Mhh, I also think it's very annoying. I first used the auto lock feature by setting
HKey_CURRENT_USER/ControlPanel/BackLight/AutoDeviceLockEnable = 1, but I also have the backlight-issue, which is really annoying.
I also installed S2U2, but after installing that program the battery-life was inacceptable. By now I'm using the manual method, pressing hang-up for 3 seconds. It works, but I often forget it, and it then happens easily that I press the hard-button which awakes the phone from standby and I make pocket-calls.
The auto-lock feature is also exactly the thing I need, except the fact that I get the backlight issue then. Does anybody know how to fix the backlight issue? Maybe by editing another key in the registry?
Regards,
Tobi
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
stm2008 said:
I use S2U2 at first, but it drains power too much, so I uninstall it after 2 days.
Then I use your method - hold the end call button to lock the device.
Now, I change the right softkey to invoke a small application that will turn off the machine (just like press power button). When I take out the stylus, the machine will on again.
Thus, I don't need to press any button, and I feel it is better......personally.......
Click to expand...
Click to collapse
which application are you using now to turn off the screen? sounds interesting.
Tyrion84 said:
As I said in the hint topic, in order to lock my device I just press the power off button (this activate the stand by), simple and fast
Click to expand...
Click to collapse
Yes, but when I activate standby and put the phone into my pocket, I often accidently hit the button again, which reactivates the phone. hit_one_button_to_unlock ist not tobi-proof
Hi there,
How can i get the lock screen by just pressing the power button? For example, I'm using the mobile and then i press the power button to turn off the light of the screen, and then when i press the power button again to turn it on, the lock screen appears, like iphone. I couldn't find it on the windows configuration.
Thanks
There is alot of applications which can do this, but most of it has serious bugs and issues.
Hope that someone is able to firm this issue out ASAP.
But, for now, no solution is available.
The lock screen that i'm talking about is the one of the Windows Mobile 6.5 not the ones that we get from programs of internet. The new lock screen of wmb 6.5
the lookscreen is activated by end key, may be you can remap it to the power key, but then how are you go to turn off the device?
Hi, Im using the Smartlock (v1.7c) and it works fine form me. Just use the suspend lock option (I only use that one). Then every time u turn the screen on it will be locked with the wm6.5 lock screen.
http://forum.xda-developers.com/showthread.php?t=505032
harfuch said:
Hi, Im using the Smartlock (v1.7c) and it works fine form me. Just use the suspend lock option (I only use that one). Then every time u turn the screen on it will be locked with the wm6.5 lock screen.
http://forum.xda-developers.com/showthread.php?t=505032
Click to expand...
Click to collapse
WOW
That's the one, thanks!!
Does anyone have a small example how this has been developed? I guess with a notification and a keypress?
Much appriciated
How to lock all buttons except Power button on HD2 ? (When the screen is off)
I have tried the suggestions from here but it just doesnt work...
Does anyone know a solution for this ?
Key Lock Cab Does not Work on HD2
Would also like to know if anyone found a solution on how to lock all keys on the HD2 except for the Power (end) Key.
Thank you
Key lock; any key power on
Me three. No one else seems too bothered
Alternative
Not got my HD2 yet so not had a chance to play around, Coming tomorrow at
last.
Anyone tried this: S2U2 (Slide 2 Unlock 2) http://www.ac-s2.com
I have been using it on my Gsmart T600 and I love it, Great little lock app
and one app I will be trying out on the HD2 tomorrow.
George
Or PocketShield, for that matter - keeps screen from coming on when buttons are accidentally touched: http://forums.jdbp.mobi/download.htm
Last time I looked it was $7.00 US or there abouts.
I have the same problem of locking and unlocking
use a headset to answer a call completely unlocks the screen, and conversations are interrupted, it is unacceptable .... Managing lock unlock the screen to review by HTC. For information, the HD1 does not have all these problems!
And whats the solution now? (exept using pocketshield).
I must say it is a shame that HTC is not including a full working lock-app for such a device with recessed hardwarekeys before selling it. This is the first thing a designer should think off !! If such keys could be accidently pressed it is a must to provide a softwaresolution.
Is it a bug or a feature?
Can proximity sensor use to solve this problem. When HD2 in my pocket proximity sensor prevent to accidental unlock, like phone conversation.
Hi
I am wondering if is it possible to have a application to turn on the screen without have to press the HD2 hard buttons. Like turn on the screen if you touch the screen for 5 seconds. Is there any application to do that, or is it possible to any developer do this ?
This is to save the HD2 hard buttons.
Thanks
no. if they did that then the phone would unlock in your pocket. touch screen is disabled when screen is off.
Sent from my HD2 using XDA Premium App
searched for another method to unlock the phone: Shake to unlock.
But found no app, that can do somthing like that with the stock lockscreen.
with Lockbot, which replaces your stock lockscreen there is a functionality that unlocks your phone, if you shake it.
Didn't tried it myself...
Thanks for the tips.
I will try the Lockbot, I put the results here.