ive downloaded 2 original ruu's when trying to flash it i get a error can someone please help me the guide on theunlocker.com says i must put my gold card on the phone what does this mean? must i just put the goldcard image on the sd card?
nvm figured out i must first go into fast boot the unlockers guide was useless
Can you post a guide?
SAuRoN92 said:
nvm figured out i must first go into fast boot the unlockers guide was useless
Click to expand...
Click to collapse
yes when you root the tattoo you do a proceduer on ur sd card whith that hxd program? just do that switch ur phone off hold volume down and power button then go into fast boot and plug ur usb cable in then run the ruu application on ur pc
Mod. edit: not dev related, moved to genral
sounds solved, if so, pls change thread title accordingly
Related
Hi guys,
This is my first post over here >>> Actully i have a problem with the athena i tried to unlouck it using X7500 Unlocker but i faced a really difficult problem. i am getting a black screen only no boot , no hard reset and no USB connection. I tried my best to breing it back up but i couldn't. Plz i need your help to solve this problem.
Thanks in advance,
Waiting ???
omanidev said:
Waiting ???
Click to expand...
Click to collapse
have you tried reading the wiki which has a page on this very topic?
No I haven't >> i9 will try now
I tried all the wiki instruction but actully i am not getting the boot screen at all only black screen no more at all
omanidev said:
I tried all the wiki instruction but actully i am not getting the boot screen at all only black screen no more at all
Click to expand...
Click to collapse
Same happened to one of our units here.
Needed a trip to the service. ALWAYS take out SIM card and miniSD card out when flashing, they're known to cause random f***ups.
jpiskorski said:
Same happened to one of our units here.
Needed a trip to the service. ALWAYS take out SIM card and miniSD card out when flashing, they're known to cause random f***ups.
Click to expand...
Click to collapse
sorry about my english i have the same problem when i press camera key +power +rest i dont have any action and i try the camera +slid volum key down and i try camera + voice key and i try all key but i dont hav any action all this whitout sim and minisd just black sacreen help me plz plz plz
I have interest problem. After step 2 of unlocking i get the black screen. After I have followed of instructions. When I try to flash the ROM, i see: "Error [302]: Update error"
I have no SIM or card inside. I tried with 3 different ROM flash my f***ed device. Nothing helps. May be anyone of u can help me?
Hi there.
Follow the instructions here *word for word*:
http://wiki.xda-developers.com/inde...e Athena Unlocker - the Black Screen of Death
miha_conan said:
I have interest problem. After step 2 of unlocking i get the black screen. After I have followed of instructions. When I try to flash the ROM, i see: "Error [302]: Update error"
I have no SIM or card inside. I tried with 3 different ROM flash my f***ed device. Nothing helps. May be anyone of u can help me?
Click to expand...
Click to collapse
What state is your Athena in ? Bootloader accessible, black screen, what exactly ?
miha_conan said:
I have interest problem. After step 2 of unlocking i get the black screen. After I have followed of instructions. When I try to flash the ROM, i see: "Error [302]: Update error"
I have no SIM or card inside. I tried with 3 different ROM flash my f***ed device. Nothing helps. May be anyone of u can help me?
Click to expand...
Click to collapse
hi
i had similar problem but before any one can help you u have to tell us in what state exactly your device is and try to get it in to bootloader before we can help first thing is you want to check in bootloader is that if your device is hard spl (if yes then you can flash it with any rom)
the eiset way to do it is Rename the .NBH file to ATHEIMG.nbh and copy it to your miniSD card. Press camera+com manager+soft reset to bootloader and wait for reading ATHEIMG.nbh from SD. Remember, the miniSD card must be formatted with a FAT32 filesystem before copying the file ATHEIMG.nbh to your miniSD.
u can use any (athena rom ) as long as it is hard spl other wise if not sure or any doubt use your ship rom (nbh file)
hope this helps
need experts guidence
hi @all
i also got one 7500 for repair, client told me while CID unlocking communications breaks and AMEO is DEAD.
Does not go into BOOT-LOADER mode,
Computer not detects it,
No responce to charger, no ring
Battery is charged with 3.77vDC
Red ring comes for a sec only try to RESET the device with Charger connected
Red ring also visible as long as Battery is not in the Phone and Charger is connected.
IS THERE ANY HOPE TO REVIVE IT
TIA
with Regards
hobbiest_2k3
Hi, I just got my Tytn from ebay, and I can't unlock it.
I unlocked my friends fine. but for me, It keeps hanging at 0%.
what's going on?
any help will be great!
also, when I try to just flash it. the phone won't go into bootloader mode.
Try doing it from the flash card.
I searched the forums and people said reflash it. But it won't work...
how do it do it from the flash card?
Thanks
sorry double posted. I press back by accident.
edit::
in tri color screen it says.
HERM100
IPL-1.01
HERM100
SPL-1.40.Olipro
None of the flashes people mentioned works! i searched. it keeps saying my phone is not connect to active sync.
Thanks
Edit:
Asfarizal said:
Manage to solve the problem ...thanks WIKI !!
Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus
Then Flash to any ROM you want !!
Click to expand...
Click to collapse
Does not work, none of the roms detect my phone
ultramag69 said:
1. Search for "mr vanxs guide" so you have an idea on what you're doing.
2. OK, as Asfarizal said "Go to Bootloader mode: Hold side OK and POWER buttons together and reset with stylus". If you cant work out what the buttons are, go to the manual. it will tell you.
3. type in "hard SPL" in search on the forum & download the .zip or .rar file. this should have 2 files inside when opened,
a). RUUWrapper.exe and
b). RUU_signed.nbh
sync Hermes and double click .exe file. follow prompts.
4. find a rom that you want (would suggest TNT SE as a fairly good rom for noobs... good and stable, no problems...) Again download, then (and this is personel preference) format an sd card fat 32 and copy RUU_signed.nbh into root directory. Rename it Hermimg.nbh. Put into Phone and put into bootloader(make sure the battery is more than 50%) follow prompts. This should get you out of trouble. You can also sync your Phone and double click on the RUUWrapper.exe HOWEVER, if you should reset your computer, pull out the usb cable or have anything else happen to the computer that interrupts the flashm, you could end up with a worse brick than you have now. try to read up on flashing (search for "mr vanxs guide") and this should help you a lot if you have other questions. Good luck and happy flashing......
Click to expand...
Click to collapse
does not work either.
Edit:
MTTY, doesn't work either, I don't see USB option.
Ray_jai said:
I searched the forums and people said reflash it. But it won't work...
how do it do it from the flash card?
Click to expand...
Click to collapse
It's in the wiki under "Upgrading & cooking" (I know this for a fact, I just added the link under that section).
for usb option got to "port" and then use the scroll bar to go down below com 8 you should see com 9 then com 10 then usb...
Hi my friends!
Can enyone help me? please?
I have tattoo on factory 1.6., SD card 2 GB kingston!
Then I root him with maverixx root, and then I use custom ROT 1.7 on there http://forum.xda-developers.com/showthread.php?t=723255
Everything gonna great until I want to partition my SD card on ROM manager!
When I think I was partition, phone restart and try to get in recovery mode! But then he only wibrate once a time and frozen first, TATTOO picture on himself!
When I tried to start him normarly, he starting!
But every time I try to get in recovery mode, he do the same thing (restart, vibrate once and frozen TATTOO text on display)!
I tried with adb reboot recovery but its the same thing!
I have nandroid on my sd card!
I also can entry on SD card via USB and also I can conected my phone to my com in deb. mode.
But I cant get my recovery mode!
Can someone please help me? Please! But step by step, my English isnt too good and my knowledge about this, too!
Thanx and best regards from Serbia!
wrong forum
rista77 said:
Hi my friends!
Can enyone help me? please?
I have tattoo on factory 1.6., SD card 2 GB kingston!
Then I root him with maverixx root, and then I use custom ROT 1.7 on there http://forum.xda-developers.com/showthread.php?t=723255
Everything gonna great until I want to partition my SD card on ROM manager!
When I think I was partition, phone restart and try to get in recovery mode! But then he only wibrate once a time and frozen first, TATTOO picture on himself!
When I tried to start him normarly, he starting!
But every time I try to get in recovery mode, he do the same thing (restart, vibrate once and frozen TATTOO text on display)!
I tried with adb reboot recovery but its the same thing!
I have nandroid on my sd card!
I also can entry on SD card via USB and also I can conected my phone to my com in deb. mode.
But I cant get my recovery mode!
Can someone please help me? Please! But step by step, my English isnt too good and my knowledge about this, too!
Thanx and best regards from Serbia!
Click to expand...
Click to collapse
Hello
I think you are best of trying in the HTC Tattoo forum, but i could be wrong
Thanx for that, I really didnt see!
Please let any moderator to delete this topic, I allready put it on right please!
My phone refuses to boot winmo, it just gets stuck at a white screen (Its worked fine for 6 months, and decided to die today -_-)
So, I want it fixed!
But....
It will boot to the tricolour whatsit so it clearly shows 'coutullaHSPL'
But everytime I try to restore the stock Radio, or ROM is fails.
With the words :
"LEOIMG.nbh - FAIL" and "update terminate UPDATE FAIL"
In red writing.
Which is something, after over a year of doing this stuff on my HD2 alone I have never had happen to me.
So I cant take the phone back to stock, so no warranty!
So what can I do from here? Put her in the microwave so she wont turn on at all?
try removing microsd card, this happens when u have a corrupt img file either on ur pc or microsd...
doctorcete said:
try removing microsd card, this happens when u have a corrupt img file either on ur pc or microsd...
Click to expand...
Click to collapse
Tried it, and nothing! I've tried 3 different official roms now
When you are in Bootloader mode and your USB cable is plugged in what does the screen say at the bottom line ? Serial or USB ?
If you can see USB its all right. So take HSPL2 and run it, after that perform task29. Then try to flash customROM.
This is how it worked for me.
RayDag said:
When you are in Bootloader mode and your USB cable is plugged in what does the screen say at the bottom line ? Serial or USB ?
If you can see USB its all right. So take HSPL2 and run it, after that perform task29. Then try to flash customROM.
This is how it worked for me.
Click to expand...
Click to collapse
Serial
Sometimes it says neither!
actually had the same problem, its the problem with the sd card, what you can do is reformat it then redownload the rom and try again, should work.
Luckych
did you try copy leoimg to your sd card then boot the phone ?
u use T-Mobile stock rom?
Serial
Sometimes it says neither!
Click to expand...
Click to collapse
What´s your operating system ?
I´m using Windows 7 so i dont´t have the trouble to install the right USB driver´s...
If your device says "serial" there must be a porblem with the drivers... It has to show you "USB". Only then you will be able to flash it directly over your USB cable and CustomRUU...
@OP.
If this thread turns into another of your "how can I brick my phone" threads, it will be closed too.
Fix the phone, or return it legitimately. Stop asking for help to commit warranty fraud.
pulser_g2 said:
@OP.
If this thread turns into another of your "how can I brick my phone" threads, it will be closed too.
Fix the phone, or return it legitimately. Stop asking for help to commit warranty fraud.
Click to expand...
Click to collapse
It was news to me it was illegal, considering the amount of people (including staff!) who tell you to smash up your laptop to get a new one lol.
I explained that to another mod.
Sorry about that.
Well if anyone has any help on a fix, i'd be grateful!
lonelykatana said:
It was news to me it was illegal, considering the amount of people (including staff!) who tell you to smash up your laptop to get a new one lol.
I explained that to another mod.
Sorry about that.
Well if anyone has any help on a fix, i'd be grateful!
Click to expand...
Click to collapse
I would do the following to get your device up and running again legitimately:
1. Take SD card out of device, insert into Card reader and then PC.
2. Download from HTC's offical website Stock ROM 1.66 (or even 1.43) with your S/N
3. Extract this RUU.....exe file to your desktop with 7-zip or Powerarchiver.
4. Rename custom.nbh to leoimg.nbh
5. Check if your SD card is not corrupt or damaged
6. If not, then copy leoimg.nbh to the root of your SD card
7. Remove SD card from PC and reinsert in the powered off device, which is not connected to your PC.
8. Press and hold vol down button and then shortly press on/off button. You should then enter bootloader screen and 1.66 will be automatically installed on your device.
9. At the end of the procedure there should be a message: installation succesfully. If yes, press the little red button beneath the battery to perform a soft reset or remove battery, wait 10-15 secs and reinsert battery and push the on/off button.
10. When the phone has booted up correctly after the SR, perform for extra security a hard reset.
When all goes as it should, you will have the the official 1.66 HTC ROM on your device.
Good luck and regards, Kuzibri
i break my usb so I take phone to shop for fix after a week I got the phone back. and now when connected to any pc 'usb not recognized' I try update drivers bat nothing hapen .....anybody can help????
take it back to the shop and complain. maybe they cross soldered some usb pins, so the cable only charges, not carries data.
I gave him a fix again and after a week he called me that he can not fix... can I instal new rom without connecting with pc??? thanks
Flash from sd card.
trengy said:
I gave him a fix again and after a week he called me that he can not fix... can I instal new rom without connecting with pc??? thanks
Click to expand...
Click to collapse
You can flash via your sd card. Go to here to read up on how to do this and all the REQUIRED STEPS to do so.
wild
does it still charge from the usb port
I'm using android nand rom
how I can instal nand rom without connect with computer ?????
please help (((
I would try another USB cable or even simply another USB plug on my PC.
Or, to make sure it´s not my PC, try it with another PC.
trengy said:
how I can instal nand rom without connect with computer ?????
please help (((
Click to expand...
Click to collapse
You cant unless you..
a) Want WM6.5
b) Have CWR already flashed (For Android)
If your USB is broken you will need to get it fixed or get a new HD2.
usb is broken and nobody cant fix does not make sense to replace the usb cabel or tried another computer
I have installed MDJs_CyanogenMod7 nand rom.... so is no change to instal rom from sd without CWRecovery???
trengy said:
I have installed MDJs_CyanogenMod7 nand rom.... so is no change to instal rom from sd without CWRecovery???
Click to expand...
Click to collapse
No, not unless you want to put WM6.5 back on.
so how I can put wm 6.5 ???
trengy said:
so how I can put wm 6.5 ???
Click to expand...
Click to collapse
Go into bootloader (turn of the phone, press the vol down button and press the power on button at the same time, wait until four color screen appear and see at the white color part the text "Serial". Plug in to your PC and wait until the "Serial" changes to "USB". Now you can flash it with winmo
Goodluck
Thanks for your answer but I knew how to flash rom with computer without you help .... you should read the other coments...
I have broken usb
You will need to place leo.image onto microsim assuming you have card reader which you will need since your usb is dead.
Then hold volume up and down whilst briefly pressing power on button. Then boot up from microsim which has leo image on it.
Do a search here on xda forums. Lots of posts on this form of rebooting..
Good luck..
xlr8me said:
You will need to place leo.image onto microsim assuming you have card reader which you will need since your usb is dead.
Then hold volume up and down whilst briefly pressing power on button. Then boot up from microsim which has leo image on it.
Do a search here on xda forums. Lots of posts on this form of rebooting..
Good luck..
Click to expand...
Click to collapse
What the hell are you talking about??
a) its leoimg.nbh not "leo.image"
b) Its MicroSD not "microsim"
c) You dont hold volume up "and" down, you JUST hold volume "down".
d) You dont boot "from" the image you flash using it.
People like you just confuse n00bs more.