Database Users

Does flashing change anything about my vodafone contract/package?

noob here...
Haven't got a response yet.
I am thinking about flashing my HD2, but I am little afraid. I have superflat rate, unlimited emails and free calls in 3 different networks and stuff like that.
Will I loose something else except the warranty?
kind regards
vito

Im no expert, i wouldnt think it would!! You could always revert back to stock so it wouldnt affect your warranty.
Maybe some1 else could shed some light on this?

contract is on your sim card... you can do whatever u want with phone...

Lake292 said:
contract is on your sim card... you can do whatever u want with phone...
Click to expand...
Click to collapse
u also at vodafone?
could u help me out a little bit?
Which ROM and radio etc did u install?

vitolamanna said:
u also at vodafone?
could u help me out a little bit?
Which ROM and radio etc did u install?
Click to expand...
Click to collapse
Hey - im with Vodafone in the UK.
It doesnt matter what ROM you flash - it wont change your package.
Like above the minutes, texts and net usage is on your SIM card not phone.
My Sig shows what im currently using

cd78 said:
Hey - im with Vodafone in the UK.
It doesnt matter what ROM you flash - it wont change your package.
Like above the minutes, texts and net usage is on your SIM card not phone.
My Sig shows what im currently using
Click to expand...
Click to collapse
how different is ur ROM from the default one?

vitolamanna said:
how different is ur ROM from the default one?
Click to expand...
Click to collapse
How different is chalk from cheese LOL

vitolamanna said:
how different is ur ROM from the default one?
Click to expand...
Click to collapse
Mate - once you flash, you wont look back at the stock rom.
Its a breath of fresh air - faster, smoother, prettier -much better!
Read the Noob guide to flashing ROM's at the top of this forum.
Any questions PM me

cd78 said:
Mate - once you flash, you wont look back at the stock rom.
Its a breath of fresh air - faster, smoother, prettier -much better!
Read the Noob guide to flashing ROM's at the top of this forum.
Any questions PM me
Click to expand...
Click to collapse
thank you!!
i love cheese..and ok...I will try to flash the same ROm you guys have.. Energy?
I was gonna install HSPL first..but my SPL version is not 1.42...

1) To install this HSPL there must be SPL 1.42.0000 on your device.
Otherwise the installation will fail!
To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version.
I think you can install hspl 2. Try that - it will just give you an error message if incompatible. What SPL do you have on your phone?

vitolamanna said:
thank you!!
i love cheese..and ok...I will try to flash the same ROm you guys have.. Energy?
I was gonna install HSPL first..but my SPL version is not 1.42...
Click to expand...
Click to collapse
Use HSPL2 instead then it much more versatile in any case.
Link to the NRG thread is in my signature.

cd78 said:
1) To install this HSPL there must be SPL 1.42.0000 on your device.
Otherwise the installation will fail!
To check your SPL version, hold the Volume Down button and do a reset.
It is possible to downgrade to this SPL, by just flashing to an Official ROM
with this SPL version.
I think you can install hspl 2. Try that - it will just give you an error message if incompatible. What SPL do you have on your phone?
Click to expand...
Click to collapse
yeah..I did HSPL2..worked fine

ClydeB1 said:
Use HSPL2 instead then it much more versatile in any case.
Link to the NRG thread is in my signature.
Click to expand...
Click to collapse
WAIT...your Rom is only for T-mobile phones???

vitolamanna said:
WAIT...your Rom is only for T-mobile phones???
Click to expand...
Click to collapse
No, it says it is ALSO compatible with the TMo US device, but works on all. As you can see I'm not on TMobile

ClydeB1 said:
No, it says it is ALSO compatible with the TMo US device, but works on all. As you can see I'm not on TMobile
Click to expand...
Click to collapse
it freezes at 0% while doing the radio update..what should i do???
Just unplug the USB??

vitolamanna said:
it freezes at 0% while doing the radio update..what should i do???
Just unplug the USB??
Click to expand...
Click to collapse
What hspl version do you have - check in bootloader mode - it should end in x.xx.HSPL and not in x.xx.0000.

ClydeB1 said:
What hspl version do you have - check in bootloader mode - it should end in x.xx.HSPL and not in x.xx.0000.
Click to expand...
Click to collapse
thank you so much!

vitolamanna said:
thank you so much!
Click to expand...
Click to collapse
Pleasure m8, enjoy your new phone.

ClydeB1 said:
Pleasure m8, enjoy your new phone.
Click to expand...
Click to collapse
one more question!
will there be a language conflict? since its a german phone...
With the new ROm it will change to english, right?

vitolamanna said:
one more question!
will there be a language conflict? since its a german phone...
With the new ROm it will change to english, right?
Click to expand...
Click to collapse
It'll now be an English phone . You can change the Sense language if you wish.

Help with hspl

I downloaded and installed HSPL 2.08 for installing Android on HTC HD2. Do I need HSPL 1.42? If so, please help on how to get it!!
Thanks

sledbiz said:
I downloaded and installed HSPL 2.08 for installing Android on HTC HD2. Do I need HSPL 1.42? If so, please help on how to get it!!
Thanks
Click to expand...
Click to collapse
read it carefully You will get it good luck thats how many ppl make mistakes and brick their phones they dont read it and do what ever. Read it over and over again untill you get it and thats when your ready to mod. Everything comes with a price....

Have a Q about HSPL, please help

My dad wants me to install WP7 on his tmo us HD2. How do i go about doing that? i also need to know how to downgrade to spl 1.42, im at 1.10 or something now. Please help
thx brah

roguly said:
My dad wants me to install WP7 on his tmo us HD2. How do i go about doing that? i also need to know how to downgrade to spl 1.42, im at 1.10 or something now. Please help
thx brah
Click to expand...
Click to collapse
Use and install HSPL3

kurt-willems said:
Use and install HSPL3
Click to expand...
Click to collapse
yeah but i thought i had to be on spl 1.42 to use hcpl3, and i dont know hwo ti get that radio

Just go there: http://forum.xda-developers.com/forumdisplay.php?f=977
If needed read the posts regarding MAGLDR
If needed read the posts regarding HSPL (may find it the WM6.5 dpvt for HD2)
There's lot of guide and video tuto
Have a good reading...

[Q] please help i want android installed on nand!!!

hello
i want to put android on nand on my hd2 i read that i first need hspl3 to do that i need
SPL 1.42.0000
SPL 1.62.0000
SPL 1.66.0000
SPL 2.07.0000
SPL 2.08.0000
SPL 2.10.0000
but i have spl 3.03.000 ...can some one please tell me how i can downrade my spl to any one above please help? any other step by step guides would be much apreciated ..

hspl4 choose 2.08.hspl only, NOT 2.08.0000

samsamuel said:
hspl4 choose 2.08.hspl only, NOT 2.08.0000
Click to expand...
Click to collapse
i dint even know about hspl4 anyways thankyou verrryy much
and one more thing why 2.08.hspl and not 2.08.000
and can i run magldr with hspl4 is it comatible??

siddharth singh said:
i dint even know about hspl4 anyways thankyou verrryy much
and one more thing why 2.08.hspl and not 2.08.000
and can i run magldr with hspl4 is it comatible??
Click to expand...
Click to collapse
Because MAGLDR only supports HSPL 2.08 right now is why you have to have 2.08. Also here are the two best guides I have seen here on XDA for installing a NAND Android ROM on your HD2. I highly recommend you take a goodds look at both of them.
Senior Member MSkip's Guide:http://forum.xda-developers.com/showthread.php?t=893948
Member Gunjaman's Guide:http://forum.xda-developers.com/showthread.php?t=939682
Here is a link to HSPL 4:http://forum.xda-developers.com/showpost.php?p=5279236&postcount=4
Here is a link to MAGLDR 1.13:http://forum.xda-developers.com/showthread.php?p=10197474#post10197474
Here is a link to Clock Work Mod (CWM):http://forum.xda-developers.com/showthread.php?t=898913
HSPL is the same if it is HSPL 2, HSPL 3or HSPL 4. They just include and support the most recent versions of SPL and provides the corisponding HSPL. When you flash HSPL it allows you to choose wich version of HSPL or SPL you want to flash. I think this is what you are looking for, happy flashing.

Hehe, 12 months ago that's more like the answer I would have given,,, now I'm old and jaded i can only manage 1 - 2 - 3

samsamuel said:
Hehe, 12 months ago that's more like the answer I would have given,,, now I'm old and jaded i can only manage 1 - 2 - 3
Click to expand...
Click to collapse
Ha what can I say I try to be a nice guy. But I do totally know where you are coming from Samsamuel, I also see why people get so upset when people start threads or post with questions that have threads with the answer they are looking for all over XDA. Heck when I first found XDA via watching YouTube videos I was totally scared to even post so I searched thread by thread and post by post until I figured out how to safely flash a custom ROM and run Andriod from SD. I even set up all night three nights in a row just searching for APN settings to get my Android build on SD card to get a data signal. So even though I do get tired sometimes of just handing the same information out over and over and over again. I can not help but remember how lost I was and felt trying to learn all of this on my own, so I try to do my part. Plus I am like you Samsamuel I beleive in carma too. Plus you have done your share of helping people here out, beleive my I know, I have read sooooooo many of your post. Hats of to you my friend.
Ok done with my rambling now lol

Lol thanku guys u all r the best ;-)
Sent from my HTC HD2 using XDA App

once i install magldr will i be able to access my current windows mobile rom??

siddharth singh said:
once i install magldr will i be able to access my current windows mobile rom??
Click to expand...
Click to collapse
once you have magldr, you no longer have windows mobile. so no, you cannot access it.
you can flash back to WM, but you will lose your nand android rom.

jsmccabe78 said:
once you have magldr, you no longer have windows mobile. so no, you cannot access it.
you can flash back to WM, but you will lose your nand android rom.
Click to expand...
Click to collapse
is it necesary to download CRW 1.3 or i can flash android through magldr too ??
if it is compulsory then whic one should i download i will be us the cyanogen mod 7 ones generaly and is 400 mb partition one be used with all android roms

siddharth singh said:
is it necesary to download CRW 1.3 or i can flash android through magldr too ??
if it is compulsory then whic one should i download i will be us the cyanogen mod 7 ones generaly and is 400 mb partition one be used with all android roms
Click to expand...
Click to collapse
yes, you can flash via magldr or CWM so no you don't technically need CMW- your desired rom will tell you which.

I need help please

Hallo all, anyone want to post here two diferent htc hd2 SPL, one from original stock rom, and one dumped HSPL from memory, I need to see diference between spl and hspl needed for development for htc hd mini, thank you! Sorry if it is allready posted but I searched without success

If you download hspl4 everythingng should be inside because you can also install original spl with it. I do not think that the sources are public. You would have to contact cotulla for it.
Sent from my HTC HD2

rauschkugl said:
If you download hspl4 everythingng should be inside because you can also install original spl with it. I do not think that the sources are public. You would have to contact cotulla for it.
Sent from my HTC HD2
Click to expand...
Click to collapse
Hi, thanks, but I could not install it becouse I have htc hd mini! Also I could not extract hspl from becouse is packed and obfuscated! So I need one hspl dump from memorry if is possible, thanks!

i don't think it's possible. at least i can't imagine how. you should try to contact cotulla. maybe he will help you.

rauschkugl said:
i don't think it's possible. at least i can't imagine how. you should try to contact cotulla. maybe he will help you.
Click to expand...
Click to collapse
It's simple with haret.exe with command:
pwf /mnt/sdcard/hspl.dump 0x0 0x200000
Or adding one line to statup.txt:
pwf /mnt/sdcard/hspl.dump 0x0 0x200000