how to keep it locked when making a BT call? - Imagio General

When my Imagio (stock Verizon ROM) is locked, and a call comes in, it stays locked. This is great because I can answer it with my car's BlueTooth unit and never take the phone out of my pocket and no buttons get accidentally pressed. But, if I initiate a call from the car's BT unit, I notice that the phone app comes up on the phone and while it does go back to the locked state *after* the call is over, during the call the screen is responsive to presses even though it was locked. This is no good because I've had stuff changed accidentally by my jacket's contact with the screen while it's in a pocket during a BT call.
Does anyone have any idea how to keep it in the locked (screen unresponsive) state when initiating calls by BT?

I'm having the same problem. I have noticed that the phone acts differently in different cars. Although the phone is locked after the call in one of my cars, that's only effective if my holster hasn't started pushing buttons, which keeps it from locking.
My previous (Motorola Q) phone did not unlock during bluetooth calls.
Verizon was no help when I reported this problem to Tech Support.
Thanks.
John

Related

Help needed: Keeping directional key "locked" whil

Hi everybody!
I got a typhoon (Movistar TSM 520) cause my i-mate Jam took months to be delivered by Expansys. When the JAM arrived, I passed mi 520 to my wife :twisted:
She is about to quit talking to me... :wink: at least by phone...
I configured her phone to be locked by default, and selected "not to answer with any key". However, the directional (joystick) key, even if slighty pressed, picks up the call. What ends up is that many times, just touching the phone with the hand when the incoming call begans to vibrate, does pick up the call, thus preventing the phone from ringing, thinking there were no incoming call, (easy if you carry the phone on your belt) and leaving an open call on the other side, (it's usually me) until tired of hearing noise and the usual people chat, I hang-up.
It obviously happens not just with my calls, but is annoying my wife and everyone else, and is expensive too....
¿Is there a way for preventing this key from picking the calls?
Thanks.

Answering calls when open and Speakerphone mic volume

Hi,
Is there anything that can be done to improve the mic volume when on speaker phone - I have had complaints when more than a foot or so away that people can't hear me.
I have the phone open on my desk most of the time and am just trying to work out the best way to deal with calls as they come in. At the moment unplugging the USB and then flipping the screen and then trying to answer the call seems a bit ham fisted and I keep on loosing calls
I personally never use my MDA Pro as a conventional phone. I find it too bulky. My own method is to always use a bluetooth headset.
If I was in your situation, I would have the Universal open on my desk, with the bluetooth headset lying beside it. When the phone rings, simply put on the bluetooth headset,press the call receive button on it, and away you go.
You don't really need to flip the screen, just close it and then use the green button to answer the call. Will work fine with the USB connected if you don't mind people looking at you strangely.
Hi Guys,
Thanks for the responses.
I don't have a headset so haven't gone down that route yet. Will they work with Skype and VOIP software etc on the phone?
As for closing and then picking up, I'm wondering if the phone has a problem because I have tried this a couple of times and have lost the calls although I am generally unplugging the USB, closing the phone and then answering - have only had the phone a couple of days so still getting the hang of it.
Hmmm....can it be used when in pda mode to answer and make calls... I have tried this, but I think either my machine's mic & speakers dont work on the inside (screen side) of the clamshell, the other person on the line can't hear, and I hear their voice (distantly), which means it is coming out of the back of the screen, not the front. Its either that or the device just isnt designed to work in this orientation.
Has anyone else tried recieving or making calls with the screen facing out in portrait mode?
Re the Bluetooth headset answering method, great idea, I do this, but I have found that sometimes my o2 blue headset loses the pairing when I press the answer call button, so I lose the call anyway.
Can anyone tell us how it should work, will the recent rom upgrade fix this, is there even a mic and speaker on the inside lid?
Can anyone tell us how it should work, will the recent rom upgrade fix this, is there even a mic and speaker on the inside lid?
Click to expand...
Click to collapse
The Mic is right next to the power button, so it is as close to your mouth when in PDA mode or closed. Also There are two speakers on the hinged lid, in PDA mode it's the slightly recessed oval shape 10mm from the top dead centre.
I've never discovered a software method of disabling this speaker. Possibly a hardware fault? Might be worth discussing with your handset provider

Loosing sounds?

Hi, can anyone advise as to why I lose the all sounds on an Orange Branded M3100 phone, other that Microsoft voice command 1.6 no other software has been installed! The details of the ROM are as follows
Operator Version: 14.123.1.614
ROM Version: 1.23.61.4
ROM Date: 07/13/06
Radio Version: 1.06.00.00
Protocol Version: 32.37.7010.01H
Here what happens no sound on the phone, reset the phone sound is now back, after a while, don’t know how long but the sound disappears, you get no ringing sound, menu click sounds nothing, reset the phone again and all is back, so it would suggest that it’s not a hardware failure but a software failure, how can I stop the orange branding installing itself after a cold reset in case something there is causing the problem, has anyone else came across this problem?
This is a brand new phone only received it Friday, does it need to go back?
Kind Regards
Dogo
I've recently noticed on my 8525 too, after a while it seems to just go on silent but the setting isn't changed it still set to on and no sound comes out of the phone no matter what program is used.
Phew, I thought it was just me..
I have noticed it may be something to do with the Bluetooth ear piece, although it always seems to happen when I have left the phone a while. and never when I try to check for the problem
To isolate whether this is hard or software you could try doing a full backup. Do a hard reset and let the device run for as long as it would normally take to show the problem, without any additional software. But do run wifi and power intensive applications to warm up the device - as this can cause internal connector problems.
If the problem is gone, this will tend towards a software problem although not an absolute guarantee. There are some issues that are related to both soft and hardware!! For example the screen fading to white issue can be caused by running (power intense) software that makes the device warm and that in turn causes pressure to be put on the screen.
A final thought, the speaker connection block is next to the stylus tip. There have been cases of the inserting and removing of the stylus causing the connector to become loose. This can cause intermittent sound or no sound at all. The warranty voiding fix is easy. Remove back and check connection is tight. No further dismantling needed. Ensure camera toggle arm is engaged before putting screws back in. (Rear Speaker)
The front speaker can also have issues. has spring contacts that can become slack - poor contact with m/board. There is a thread on checking this.
Mike
No Sound, not a Stylus issue
8525, ms voice dial 1.6,
HTweakC 2.0,
SBP Mobile Shell 1.0.0 build 2632.
ROM 1.34.502.1
radio 1.16.00.00
This has been happening about a week, nothing new installed. On Saturday I missed 12 calls because it was "auto-muted" nothing was on mute, just no ring sounds or anything else. I thought it might be some setting, I suspected that it didn't come back after I had set on vibrate for a meeting, so I went through everything, looks good. had to soft reset for audio to come back. Happened again Yesterday morning after being on charger, had to soft reset, happened again this morning after being on charger, had to soft reset. I'm suspicious of the charge ciruits, the phone was placed on a night-stand and I checked to make sure sound was working AFTER i plugged the charger in (i am an on-call engineer for hospitals) when I got up this AM the first thing I checked was the sound, no sound. Had to do a soft reset and sound is fine.
THIS IS VERY, VERY, VERY troubling.
i cant say that my sound has been "loose"
thefunkygibbon said:
i cant say that my sound has been "loose"
Click to expand...
Click to collapse
yep, I agree. My keyboard slider might be loose, but never had problems with the sound.
No sound - possible solutions
I too have had the no sound problem, but I also have a solution (well it seems to work for me and a few other people I know)
I have found that if I have more than about 800 sms messages on the phone (combined count across inbox, sent items, deleted etc...) my phone will decide sometimes to stop making any sounds.
Other symptoms include thew screen not going back to the background when problems are "closed" (well press the X button), sometimes not changing from portrait to landscape.
Hitting the reset key temporarily fixes the problem, but it strike again at any time...
I have seen this on both the official UK orange firmwares
As a side note, more than about 1000 sms messages and 5 unread sms messages and the phone will lock up about 10 seconds after the phone boots up. You have to be quick when the phone boots to go in to the sms inbox and delete 1 message before the phone locks up. This can be a bit tricky but i have done it a few times
from readingmany related threads, it looks like there are several causes for this issue. for me, it was definitely microsoft voice command 1.5 and 1.6. I turned off any notifications from voice command and my problem went away. no calendar voice announcements, no callerid, no bluetooth routing announcements, etc. voice command simply doesn't give up control of the audio sometimes, and it appears to occur most when it wakes up and announces something.
All I use voice command for now is voicedial. try that a while and see if you are fixed.
1.5 was worse, but 1.6 does it too.
good luck!
wes
saga continues
It did it again, twice in one day. Picked up the phone, (it had been resting on the table for several hours). No sound, I tested by placing a call and turning speaker on.. this works! So the speaker (rear) is fine as well as the front (ear).
After I heard the speaker on speaker phone I tried hearing the dial tones or other sounds, none. No incoming ring.
Device and phone volume on FULL
Turn volume off, vibrate, on, off on, and from phone screen turn to vibrate then back to sound
Vibrate still works for inbound calls
Turn voice command off and on
Go to phone (in settings and play the ring I've chosen) and suddenly it’s working again?
I'll try the turning all but phone options in voice command to no-notify. But to tell you straight, this is silly, one more day of this and it's probably (unfortuately) crackberry city for me. I simply can't have a phone that doesn't ring. I guess some ittertation of an O2 would do.. but I'm not too keen on plopping down another 5bills....
any ideas?
labrati said:
It did it again, twice in one day. Picked up the phone, (it had been resting on the table for several hours). No sound, I tested by placing a call and turning speaker on.. this works! So the speaker (rear) is fine as well as the front (ear).
After I heard the speaker on speaker phone I tried hearing the dial tones or other sounds, none. No incoming ring.
Device and phone volume on FULL
Turn volume off, vibrate, on, off on, and from phone screen turn to vibrate then back to sound
Vibrate still works for inbound calls
Turn voice command off and on
Go to phone (in settings and play the ring I've chosen) and suddenly it’s working again?
I'll try the turning all but phone options in voice command to no-notify. But to tell you straight, this is silly, one more day of this and it's probably (unfortuately) crackberry city for me. I simply can't have a phone that doesn't ring. I guess some ittertation of an O2 would do.. but I'm not too keen on plopping down another 5bills....
any ideas?
Click to expand...
Click to collapse
I have just read your last two posts. I am wondering whether you are saying you have a sound/ringer problem OR whether you mean the phone sometimes crashes and therefore does not ring (i.e. you then need a soft reset) and sometimes you discover you've missed a call but never heard it ring.
If the above is true then I think you need to look for the solutions for avoiding hangs/freezing. I can guide you to these or a search will show them. It certainly does not appear that you have any physical problem with the speaker/earpieces.
Mike
dogo said:
Phew , I thought it was just me..
I have noticed it may be something to do with the Bluetooth ear piece, although it always seems to happen when I have left the phone a while. and never when I try to check for the problem
Click to expand...
Click to collapse
Hi, I never had a sound issue untill I started usin my HT820's, but have noticed a few times lately that my device sounds arent working, (I dont mean always through to the bluetooth headset) and I just power off/on the device, I dont get that many calls, so I havent missed any, and wasnt sure if it was rom or bluetooth related for sure, but I do usually leave my bluetooth on, just not always the headsets, it also doesnt happen a whole lot.
Loose connector
I'm not sure if this will help anyone, but i was losing sound on my 8525. I had dropped my phone twice and the rear speaker connection had gotten loose so i opened it up following the directions at http://www.howardforums.com/showthread.php?t=1152710&page=1&pp=15
and now i have sound again.
Continued Issues
Mike, thanks, the issue isn't with the phone locking up at all, it's been very stable, I think I've soft-reset probably 3 times in two months.
The phone literally will stop emitting any sounds. I can still hear if I place a call and if I place that call on speaker phone it's fine. However if you call the phone, try to play an audio file, etc there is no sound that emits from the device.
It did it AGAIN today, I tested, was able to place a call and put it on speaker and called it with my other phone, the pop up screen announcing the inbound call came up and everything else on the phone worked as it should (except no ring). I then went to settings phone and hit ok (top right of screen). BAM.. sound was working on the device again, inbound calls ring, able to play audio etc.
I did note one other possible anomaly, I have my PTT mapped to initiate voice command, when trying to use this I was unable to initiate voice command. After going to phone and pressing OK, voice command started working again. W/O voice command I'm sunk, I have 500+ contacts.
I placed a call to AT&T and I'm back on the "chronic retention" list.. ughhh.. I went through 8 treo's last time. I don't want another basket of refurbs to deal with, I like WM so much better than previous interfaces.. any ideas are very, very, very welcome.
-mike
More information
This morning, the sound was gone again, but I went into settings and started playing to see what else might induce it to work again, I tried voice command again, disabled and re-enabled, that didn't work.
I then went into sounds and that didn't work, went into Today, and Buttons neither of those worked, but when I went into input (didn't do anything, just opened it and closed it) sound started working again.
Hopefully, none of you guys have a newer ROM with the loud startup animation and attempted to turn down that volume via the registry as outlined in the wiki. Unfortunately, doing that also lowers the speaker volume so I just disabled the animation instead. Phone and bluetooth sounds fine but mp3 and everything else were also lowered to a whatever level depending on the startupanimation volume you set.
update
It did it to me again yesterday, this time only going to settings phone and pressing OK would make sound come back.
Today, the phone refused to dial or emit any sound. Would not come back after soft reset (would not dial, no sound) had to do a hard-reset (removed battery). After first soft reset a windows came up to advise that mobile voice command couldn't start...
For a darn near $500.00 phone this is pretty sad. Love the phone but gee whiz...
Daily occurance
Well, it does it every single day at least once a day, and I've noticed the phone has slowed a lot, sometimes during SMS or email the cursor goes away or I have to wait 20-30 seconds for words to complete typing after I've finished. I guess I'll get my refurb next week. Perhaps go back to palm.. dunno...
possible fix?
I turned OFF the SMS message sounds and it seems to be working w/o losing sounds again! I'll let it run for a couple of days and see if this is the deal, but I now have no audio announcement for ActiveSync, POP email, SMS, or MMS. I do have audio/vib for missed calls. Anyway, it's been up and running fine all day. Good Grief.
no fix in sight
On hold with ATT right now for another phone. It did it again today at about 10AM. Strange, it may be time sequential, but it didn't do it at all yesterday.. it was great to have the phone ring.

Disable wakeup in case of call via bluetooth

I have a small problem. I have my phone paired with my car via bluetooth. Is there a way to disable the screen from turning on when a call comes through and the phone is paired with the car (or a headset for that matter).
A more favorable solution would be so that the buttons (except power) would be disabled, since the root of the problem is that when I get a call, and Im talking via the car, as Im driving, the bumps in the road cause the phone to rock around the place where I put it, and it presses all the different hardware buttons (like hang up).

standby when ending call via BT-headset

Hello there,
has anyone an idea how to realize this:
blackstone is in standby - bluetooth is activated - bluetooth headset is on - both connected - call comes in - I take the call with the bt-headset - talk - I end the call with the bt-headset - blackstone remains on until the adjusted time for standby is reached
but I would like the blackstone switch into standby mode immediately after ending the call
is this possible ?
greetz
smuggs
This needs addressed - sleep after a call during headset mode
In headset mode the phone does not go into sleep mode or power off automatically after a call. This is a major issue for those of us who leave the phone in the pocket in the car or when using bluetooth headsets. I have finished calls recently and then 5 or 10 mins later my phone would connect to someone random in the phonebook whilst driving which is quite embarrassing "I didnt call you" - "yes you did"!!
In the meantime I am using constant device lock but this is a clumsy solution for what surely MUST be a common problem. Can anyone else not help us out and try to get the device to sleep after a call during headset mode? I would be so grateful for a useful solution that doesnt involve a constant device lock that I dont really need!
Cheers
I'm having the same problem also....
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
the_flyer said:
The list grows - surely there must be others out there with the same problem. We should try and get out heads together to crack this one!
Click to expand...
Click to collapse
ooch aye the noo ...
obviously NOT ... which makes me wonder ... as for me this is a main issue
pimpin' seems to be more important than functionality ... huh?
i guess i will write to htc and see what they r saying
will post answers here
greetz
smuggs
Sounds good man, keep up posted. Its a major issue for me too!
ok folks .. here is the very annoying answer i got from htc support
You recently wrote us about an issue that you have encountered with your HTC Touch HD. There is only one way to instantly set the device into standby mode: please press quickly the power on/off.
what shall i say ... THAT'S CRAP !!!
and i'm still thinking that there must be a workaround ... redefining the buttons or something like that ... any ideas from the specialists in here ?
c'mon guys - help us out here
greetz
smuggs
that's really strange...just tested it.
connection htc/jabra bluetooth.
htc device lock ON.
an incoming call arrives, pick up the call via bt-headset. end the call via bt-headset. phone is immediately locked again (htc own device lock), display is on. after 1 minute also the display turns off.
or do you mean something completely different?
Same here and it feels retarted.
Ooe of the major purposes of a bluetooth headset is to avoid contact with the device. So having to take out the phone or handle it (in a car/office whatever) after a BT call is rediculous.
BT headset drops call
I am not sure if I should pose my questions here but my Jabra BT headset is connected to my Blackstone on standby mode via BT. However, when an incoming call comes, the BT headset does not get the call but is transfered to the HTC handset instead. I have no problems making outgoing calls on the Jabra headset. It's frustrating when I am driving... could anyone tell me how to remedy this?
Thanks in advance.
end call via BT into standby works with LockMeLite
hello there,
with LockMeLite http://forum.xda-developers.com/showthread.php?t=478606 and my samsung wep250 bt-headset
it works
this headset is non-a2dp-capable
dunno if an a2dp capable headset will work, but will test is (next week)
greetz
smuggs
I have tried flashing newer fancy roms and tried various lockers but no applications are intuitive enough to fix this simple fault. When making a call in 'headset mode' the fast sleep mode prevents accidental presses during a call. Unfortunately when the call is ended via handsfree/car kit/recipient, the phone wakes back up to life.
Any locker I have used is active indiscriminantly when pressing the power on button to wake the device from sleep. I have tried lockmelite, hd tweak for inbuilt MS lock, pocketshield and another locker however none have the function to only lock the device whilst in headset mode and after a call has ended. This is a request to developers, expert cooks and modifiers please can anyone help us out?
Thanks a million
Check this, it can do the trick...
h..p://www.pocketshield.net/default.htm
S2u2 V2.04 workes fineas you needs, even look during a call (gives black screen)
I'll do a try
As I have the same request/problem I'll try the following with the help of AGEProfile.
- I create a profile actived when the headphone is connected, when this profile is activated it launches a program named MySuspend so my phone is suspended.
- I create another profile activated when the headphone is connected and there is a call in progress, this profile does nothing but it exists (only)
So when my phone goes connected with the headset (BT) it goes suspended.
When I receive a call it wakeup as normal and the profile is switched to the second one (but does nothing)
When the call finishes, the first profile is activated again and the phone goes suspended.
That's all (and it should work, I just made the setup for that).
Regards,
P.S. sorry for my english because it's not my language.
I also have this same question. After ending the call the screen stays unlocked and will inadvertently call a number sometimes.
I tried
Yes I made a try yesterday evening in real conditions and it work very well
So I'm very happy
I forgot to mention that I also use the Inesoft to have the screen locked when one call come in.
Hope this will be useful for you too
Regards,

Categories

Resources