I wanna know the normal frequency when G1 stay idle.
Thanks
i think mine idles at 245 MHz
thats stock and i havnt changed any setting with the setcpu app
Conservative governor
125000/77/16/0/20
Min 768 mhz
Max 844.8 mhz
Sent from my T-Mobile myTouch 3G Slide using XDA App
you have a larger copy of the attached pic? how long have you been running it and how stable has it been? which ROM are you running it on?
Armyjon88 said:
Conservative governor
125000/77/16/0/20
Min 768 mhz
Max 844.8 mhz
Sent from my T-Mobile myTouch 3G Slide using XDA App
Click to expand...
Click to collapse
Kind of a pointless new thread. What is your score? Picture is too small.
I use the tester at 844mhz min and 844mhz max screen on and 245mhz screen off and get 11.592
mmmark111 said:
Kind of a pointless new thread. What is your score? Picture is too small.
I use the tester at 844mhz min and 844mhz max screen on and 245mhz screen off and get 11.592
Click to expand...
Click to collapse
did you change any of the other settings like he did? do ya have "set on boot" checked or unchecked? how stable is it? I can only be mildly adventurous due to my phone being the only way I can get online when I'm in my 18-wheeler
Some other forum members seem to have reboot and lockup issues with 844mhz but I don't. For a long trip I would keep it at 806mhz if you're unsure and it's untested. Not every phone is the same.
I use the Overclock Widget and set it to:
Auto Start on boot - No
Screen on Min, Max 844
Screen off Min, Max 245
Differ Freq Screen Off - Yes
I was wondering what would be considered optimal settings for SetCpu. I amn running BaconBits and am not sure how I should do the settings.
Any help would be appreciated!
Thanks.
i have mine set at:
Profile 1 : 806 MHz max, 245MHz min, On Demand, priority 50
Profile 2 : 245 MHz max , 245MHz min, On Demand, for when the screen is off, priority 50
if i change the MHz, i change it higher on profile 1 for whatever i need it for then i just scale it back down to 806 when i am done...
Mines pretty much the same as the one above save for max clock speed being 1500Mhz.
Sent from my HTC Vision using XDA App
I have my scaling set ondemand, have setcpu set at boot, with 1497 max and 245 min, with profiles for various states of the phone.
My profiles:
Screen off: 245 max, 245 min - Priority=100
Battery temp >104: 806 max, 245 min - Priority=90
Battery <10: 245 max, 245 min - Priority=80
Battery <20: 368 max, 245 min - Priority=70
Battery <30: 768 max, 245 min - Priority=60
Charging/Full: 1497 max, 245 min - Priority=50
I get well over a day of use, even with moderate-heavy usage, even with my overclocking on Evil's Sense ROM.
If you search google for an "overclocking 101" thread you should find a rather large ongoing break down of setcpu and the most efficient way to use it. I believe its on one of the droid forums, awesome info.
tazz9690 said:
I have my scaling set ondemand, have setcpu set at boot, with 1497 max and 245 min, with profiles for various states of the phone.
My profiles:
Screen off: 245 max, 245 min - Priority=100
Battery temp >104: 806 max, 245 min - Priority=90
Battery <10: 245 max, 245 min - Priority=80
Battery <20: 368 max, 245 min - Priority=70
Battery <30: 768 max, 245 min - Priority=60
Charging/Full: 1497 max, 245 min - Priority=50
I get well over a day of use, even with moderate-heavy usage, even with my overclocking on Evil's Sense ROM.
Click to expand...
Click to collapse
I just stole the rest of your settings, hope you dont mind!
WarBird87 said:
I just stole the rest of your settings, hope you dont mind!
Click to expand...
Click to collapse
By all means, have at it!
Main profile: 245 - 1017 on demand
Charging/Full: 1017 - 1017 performance 90 priority
Screen Off: 245 - 245 performance; mainly as this mode will bypass the need to poll/sample for CPU speeds, thus reduces some CPU load. 100 priority
Battery < 20%: 245 - 768 on demand 75 priority
i decided to put the SetCPU widget on my homescreen last night so i could see if the profiles were actually changing as my battery ran lower... and my phone got reaaaalllly sluggish to the point where i would have to wait a few seconds for it to flip back and forth between screens... i deleted the widget thinking that might have caused it, but it was still laggy... so i unclicked on the profiles for battery and got it back to 806MHz and it was fine again...
im guessing that it supposed to slow down the phone when the CPU drops below 806MHz but i didnt think it would be that bad... anyone else experiance this?
WarBird87 said:
i decided to put the SetCPU widget on my homescreen last night so i could see if the profiles were actually changing as my battery ran lower... and my phone got reaaaalllly sluggish to the point where i would have to wait a few seconds for it to flip back and forth between screens... i deleted the widget thinking that might have caused it, but it was still laggy... so i unclicked on the profiles for battery and got it back to 806MHz and it was fine again...
im guessing that it supposed to slow down the phone when the CPU drops below 806MHz but i didnt think it would be that bad... anyone else experiance this?
Click to expand...
Click to collapse
What are the profiles you are using? The ones you copied shouldn't have run into any conflicts... except when you're under 20% battery where the CPU is throttled under 368.
What is your powersave bias?
Speaking of powersave bias, could anyone tell me some optimal settings for the setCPU advanced tab? Don't mean to derail this thread, I've just never used that tab.
Sent from my T-Mobile G2 using XDA App
SeReaction said:
What are the profiles you are using? The ones you copied shouldn't have run into any conflicts... except when you're under 20% battery where the CPU is throttled under 368.
What is your powersave bias?
Click to expand...
Click to collapse
I believe i was right at 20% batt or right below,so that could have been the issue... I havent messed with anything on the advanced tab as i dont know much about it, the powersave bias is still set to 0
I have HTC heroc 200 alltel running fresh 2.40 rom firerat mtd 160 10. what should I set CPU to
Sent from my HERO200 using XDA App
does anyone else feel that their battery lasts longer without using setcpu at all? I mean I love what setcpu can do but in terms of power efficiency, even without overclocking, for some reason I feel like my battery last longer without it.... or am I just crazy?
j.books said:
does anyone else feel that their battery lasts longer without using setcpu at all? I mean I love what setcpu can do but in terms of power efficiency, even without overclocking, for some reason I feel like my battery last longer without it.... or am I just crazy?
Click to expand...
Click to collapse
I used to get about a whole day without setcpu. With setcpu, same amount of usage, I get well over a day and a half before having to charge it up.
Does SetCPU work on the Mytouch 4G right now? Or does it need a custom kernel?
I use it fine to set profiles and all...but you can't go any higher than stock speed yet
Would de-clocking it improve battery live at all? The MT4G is uber fast right out of the box, and I could probably live without a couple hundred MHz.
OK I can say now, SetCPU not completely working on my MT4G
Scale doesn't work. If I set min at 768 and max 1024, it will still bounce between 245 Mhz and 1024.
If I de-clock to 768 as max, it still goes to 1024 Mhz
I was wondering why my ScreenOff max 245Mhz profile is not improving my battery life....well, that't why.
You might have already figured out that HD2 can be overclocked as high as 1.5 GHz on its powerful Qualcomm SnapDragon Processor. Many people run their devices on default clock speed, but there are few of us who overclock their devices to get max out of it. So i have started this thread to know what your max clock speed is and what governer are you using. Post replies below. Also, don't forget to mention your Phone's Temperature if available.
Mine: 1.2 GHz On SmartAss Governer , Temperature Usually Around 95F
Click to expand...
Click to collapse
1305MHz using interactive, temp alway @ 28°C even when phone get hot?? tho alway careful to let it cool down when it feels too hot.
I have underclocked ... to 720Mhz (interactive)
Performance is okay and saves battery live
Temperature is about 28 celcius.
1267, 768 when battery less than 30%, 422 when screen is off
On-demand w/screen on, conservative when <30% and screen off
Not great on battery, but good performance an no wake lag
CPU Load jump or whatever it is, set to 30%
Sent from my HTC HD2 using XDA App
Sticks with no overclock
using a rom which is fast enough and saves battery life, Dont see a point that needed to overclock CPU
Undervolted to 576mhz, for better battery life.
Runs smooth enough for all apps, including navigation and games
No overclock for me, don't need it, phone is fast enough as it is.
Clock speed: 998mhz (default), governor: ondemand, temp: n/a
Good enough for me sweet onough on may battery.
P.s. there seems to be no difference(performance wise) between rafpigna kernel oc'd @1.5ghz and tytung kernel oc'd @1.2ghz, when testing on linpack and/or other smarbench tools