i have an problem with my device: when i do an soft reset, he automatically connects to the wireless provider(KPN). I can telephone for a few minutes and then the connection is lost but the xda sais he has still connection.
when i want to phone somebody, there comes no noise out the speaker(there is no dialing), also people who wants to phone me will get an woman-computer-voice that sais "the phone is not on the network now, please try again later".
When i set the xda to connect manually to KPN, there are no problem what so ever. But when i do an soft reset, he wont make contact, i need to set it back to auto, then do again an soft reset, and then set it back to manual and connect to KPN.
i think that an radio update maybe will work, btw i have tried all windows from romkitchen but all have the same problem. i have windows 2003 se now installed.
Romversion:3.04.00 ENG 06/12/02
bootloader v5.15
Radio version: 4.06
Protocol: (g32s54 at start up screen) 32S54 in device info
I have an PW10A1 but windows 2003 se sais PW10B1
Mobile: O2 xda PW10A1
current sim provider: "Telfort" on the "KPN" network
I live in the netherlands.
Related
Hi,
I am using an XDAIIi, with an UK-Orange sim (I unlocked my XDAIIi from O2), and my device info are
ROM Version: 1.10.00 WWE
Rom date: 12/24/04
Radio version: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.10.124 WWE
After having set up my GPRS and MMS settings succesfully thanks to:
http://forum.xda-developers.com/viewtopic.php?t=13498&highlight=gprs
I installed the "GPRS monitor" on my XDAIIi. The result was that my settings were no longer working, and I tried to re-apply the executable from the above link to reset my settings properly.
After a few unsuccessful attempts, I deleted all the settings and tried to input them manually as instructed in the following link:
http://forum.xda-developers.com/viewtopic.php?t=7306
Having deleted all settings, I cannot see the "manage existing connections" links. So I try to create a new connection, and get a suprising message telling me that "A connection already exists with this name" when I try to create the "Orange GPRS" connection (interesting because I had deleted it and cannot see it anymore).
I was wondering whether anyone had a fix for this? If I need to hard reset my device, would anyone have the proper Orange (UK) GPRS and MMS settings for the XDAIIi (and are they compatible with the "GPRS Monitor")?
Any help would be greatly appreciated.
Many thanks,
Behnouche
Orange payg settings
does this work for the pay as you go sim on orange as well. Id love to find out...
Cheers
No ideas mate. I finally hard reset my device, input all Orange settings again from scratch, and things finally were sorted out. No clues as to whether it would work on a pay as you go scheme.
Cheers,
Re: GPRS Settings
For updated cab installs for all UK Carriers please go to link below.
http://forum.xda-developers.com/viewtopic.php?t=26463
I have a wallaby with the XDA special edition ROM, and I'm using it with the Telefonica operator in Chile.
I just made the connections settings for the internet settings as the Telefonica company told me:
Cellular Line (GPRS)
APN: web.tmovil.cl
and in the dialing locations tab, under dialing patterns I set up the phone number to be dialed: *99***1# in the "For International calls, dial". (this is the only place where I can set the dialing number)
the user is "web" an password "web"
I believe all is ok, but when I try to make a connection, the phone shows the following message:
Phone:
UNKNOWN APPLICATION ..... Is this message ok?
and after that, it shows a Trouble Connecting message:
"The answering modem has disconnected. Verify the phone number and then try again. To change your... "
Any help?
Thanks a lot
i got that message when i didnt select the GPRS line...but you've done that :?
I'm thinking tha may be the radio version. My device have the 6.18.0 version.
Any ideas????
Unknown Application solved
Finally I solved the problem changing the ROM version in my XDA.
I installed the A.30.09 ENG T-mobile version, with the same settings for Telefonica in Chile and every thing connected OK.
Dear friends of XDA-developers, what do you think about this?
I has to be something with the different systems between Europe and America???
I thought that that was impossible to cross network settings accross other carriers ie o2 over orange internet too but igotta thinking theoretics again an thought back to basics an realized a description change "ityhere" an there "an sum proppa details umite jus be able to piggy back it altho as previously stated iaint rooted an am unable atmo indespite phone comp sayin iusd 170gb data last month neityeedless say my endless searches for knowledge wud continue aslong as i new there is always a way for me to help others or improve possible security loops
I am having all kinds of problems with my GPRS Connection. I have input the settings for Centennial Wireless, my carrier, and everytime I connect this is the message i get
dialed:
private.centennialwireless.com
Cannot connect for unkown reason. To check your connection settings and chem them if needed, tap settings. If teh problem continues, reset your mobile device according to your manufacturer's documentation and try again.
I did a Hard Reset and put the settings in again with the same problem. Any help will be greatly appreciate.
HTC Tytn
ROM: 1.18.255.3
ROM date: 07/22/06
Radio Version: 1.03.03.10
Protocol Version: 32.34.7010.01h
ExtRom Version: 1.18.255.106
Did you activate the hsdpa protocol ?
No I have not. Can you send a thread or tell me how to open that protocol? Is this done by the provider or on the handset itself?
Also how will this help if I can not even connect to GPRS/EDGE?
I have resolved planning in setting->connection->gprs setting
CHAP Autentication...
I am hoping that you can help me out with a little situation that I may have created on my HTC Tytn.
I was using the original ROM that Shipped with my Tytn and I was experiencing a "slow" device with some audio problems while in calls. Yesterday, I decided to upgrade. I installed SPL-2.10.01ipro. as per the warnings on the page (thankful that I have not bricked my phone) Worked perfectly for allowing myself to upgrade to what I think on the downloads page was the most current "stable" rom. Currently my Tytn is running the download listed below.
Upgraded HTC English Qtek_001
Rom 2.11.255.1 03/07/07
Exp Rom 2.11.215.102
Radio 1.38.00.10
Protocol 32.71.7020.12H
OS Build 15673.3.3.1
AKU 3.3.1
SPL 1.11
HTC BOOT 108
I have to admit, the unit runs great. Problem though, on the old OS, I was able to, under phone "band" select "2G". The reason for this is the Blackberry Connect software that I need to run for my work. (Or else I get assimilated into the world of Blackberry handhelds) will not connect as 3G. I have currently set the unit to "auto" for network type ("GSM ,WCDMA) and "auto" for GSM/UMTS Band. Any time I try to change this to anything else the unit comes back with a "Warning" that it can't complete the change. The unit still will not connect and says "Not Connected" under the bb_connect ver 4 status page. I have tried to install the older Rom back to;
HTC English
CID Q-TEK_001
ROM 1.18.255.3 7/22/06
ExtRom 1.18.255.106
Radio 1.03.03.10
Protocol 32.34.7010.01H
OS Build 14955.2.3.0
AKU 2.3
SPL 1.11
HTC_BOOT 1.04
I'm not sure if I can keep the upgraded radio and Rom versions and simply change the OS version but when I try to change to the complete rom above I get an error (260): UPDATE ERROR
"The Update Utility cannot connect to your PDA Phone. Please Check your USB Cradle/Cable is connected properly between the PC and your PDA phone"
The connection is good as I have been using active sync to install things like the blackberry software.
I am spinning my wheels here. I thank you in advance for any assistance that you can provide.
I've successfully upgraded my Qtek 9090 to WM6 Pro (5.2.16.20)
-
ROM version: 5.60.00 WWE
ROM date: 03/02/05
Radio version: 1.12.00
Protocol version: 1337.42
All works great, but still I can't connect to ActiveSync 4.5
When I put the Qtek 9090 on cradle it ask to install Activesync 4.5 or newer ... but I've installed (and reinstalled) this tool, downloaded directly from MS site.
I've also Updated all the components on PC (SO, Office, etc ..) with Microsoft Update. But still I've this problem.
Please, could you give me any help ?
Thanks in advance.
Beppe
-
i got the same problem!
my 9090 says:
cannot open the connection usb, this connection is no longer valid ore exist, plz select a diffrent
it worked until now
Sorry, my English is bad. But I try to help because I had the same problem.
Which firewall is installed?
With the change of WM2003 on WM6 new rules must be allocated for ActiveSync.
Several ports (999, 5678 etc.) must be switched free or turn the firewall off for testing!
Simply turning off the network monitor at the Comodo Firewall.
Good luck!
Mathias
My Qtek 9090 ask for Activesync 4.5 or newer while connecting.
I have just tried with another PC with XP on board and a fresh copy of Activesync 4.5 - Same problem (ask for 4.5 or newer)
I'm quite sure the problem is on PDA.
I hope in some suggestion.
Thanks to all.
Beppe
-
do search on the forum.. you'll find what you need..
cheers
evo
check\uncheck in USB to PC - Enable advanced network funkcionality try which one of them will work with your pc
RESOLVED !!! (Yeahhh)
The problem was on network properties of Qtek, when connected.
Right-click (in control-panel/network-connection) the Qtek entry / Then properties
- check only tcp/ip protocol and MS network services
- I've disabled bindings for VPN and packet-trace utility
Activesync 4.5 WORKS GREAT NOW
Have a nice WM6 upgrade.
Beppe
-