Today I probably flashed my phone with a wrong (32A) SPL. I can't access fastboot, recovery mode or anything, including access from PC (either Linux or Window$). But it's stuck on splash - if it was totally bricked, would it still load a splash screen? Is there any hope?
try a tecnique used by one of our members.
remove battery of your phone. Connect to your computer by usb.
2) input command fastboot boot recovery.img
3) input the battery
phone will turn on, and if SPL is breaked problably he'll boot in recovery mode.
But one question. You flashed the SPL, now you dont have any ROM . So... Have you entered in fastboot (Back+Power) , Checked if was Sig Off and flashed directly from there a recovery img?
Please provide info wich is on fastboot mode. The first 5 lines. Thank you
I can't access anything else than splash screen, fastboot and recovery included. The method with replacing the battery also doesn't work.
Code:
SAPPHIRE UNKNOWN 32B SHIP S-ON G
HBOOT-1.33.0007 (SAPP10000)
CPLD-10
RADIO-2.22.19.26I
Jul 31 2009,15:49:25
Related
I tried to install a rom, and it is stuck at the green splash screen. I can still boot in HBOOT, but when I try to with my SAPPIMG.NBH, fastboot will not read it. I had to use a different memory card other than SDHC, is this why? If not someone please help.
SAPPHIRE PVT 32B SHIP S-ON G
HBOOT-1.33.0006 SAPP30000
CPLD-10
RADIO-2.22.19.26I or 1
MAY 27 2009 19 06 41
Originally running 1.5
Sounds familiar. I had the same problem a week ago. Install recovery again through the ADB in fastboot ..
no problem
no deal
ADB only works if it has an operating system to communicate with. Fastboot does not load the OS.
I'm having the same problem, check out my post:
http://forum.xda-developers.com/showthread.php?t=614023
if you're lucky, you can use fastboot to load a recovery image. check this out http://forum.xda-developers.com/showthread.php?t=530492 and scroll to method "via fastboot -> Requires engineerings SPL!".
if your SPL is good you're good, if not the solution is much more complex (goldcard, change spl, ... )
Well I fixed it. I had originally used the wrong rom (for 32A). So I am a complete noob. But somehow eventually HBOOT eventually read my img. I have to be more careful next time.
I have a rooted unlocked Magic 32b and have flashed many roms on it but it has suudenly stopped booting into recovery.
If i hold power and home it now just hangs on vodafone splash screen.
any ideas?
if you have an engineering SPL installed on the phone, you can use fastboot from the SDK to flash a new recovery image (assuming you can still get into fastboot mode on the phone)
Or you can go to Android Market and download ROM Manager & flash recovery through that application (both ClockWorkMod & Amon_RA supported). If the first flash fails don't worry just reflash the same recovery (2nd flash works every time)
Thanks for the help, I reflashed AMon-Ra recovery via fastboot and all is well.
I'm having exactly the same problem.
Think I flashed the 32a instead of 32b onto the magic uk vodafone device:
sapphire pvt 32A eng s-off h
hboot-1.76.2007 (sapp10000)
cpld-10
radio-6.35.10.18
aug 21 2009,18:19:15
Could you link to the recovery you managed to flash your phone using please? I've tried loads of versions via adb/flashboot and none work sadly.
Hoping I don't have to buy another phone
I have similar issue to original poster, I've flashed many roms over the last year and all have been fine until now
VOLDN+POWER, HOME+POWER, BACK+POWER are all no go.. all stuck on bootloader splash. Can someone confirm I've finally bricked my 32B?
Last SPL i put on was 1.76.2007 i think (cant confirm no fastboot..) radio was 2.22.19.26I
Hi all,
Hopefully someone knows the answer to this one. I am completely screwed here and need some help.
I rooted my MyTouch 3G 3.5mm (32a) with no problems and tried several ROMS. So, I was going to try a ROM with a required radio and tried following this http://forum.xda-developers.com/showthread.php?t=605239 to do so.
It seemed ok, but then all heck broke loose.
Now I am stuck with the following:
HBOOT-1.33.2010
CPLD-13
RADIO-3.22.20.17
And nothing else.
I tried to unroot it and everything I could think of. That was probably a mistake (#2) because that replaced the recovery. So, now I can FASTBOOT and that's it.
If I try to replace the SPL or recovery or anything, I get a "Signature Verify Fail" from ADB and if I try using the SD card, it loads the img, checks it, and then does nothing.
Any ideas?
Your SPL is perfected so you cannot fastboot. Do you have a recovery that you can boot into?
As far as your fast boot problem goes look at this :
http://forum.xda-developers.com/showthread.php?t=548218
Click to expand...
Click to collapse
Does that translate into "I am screwed"?
can you enter any kind of boot, try volume + power, home + power, if you can, then use droid explorer to reflash the system
Do you a recovery you can boot into?
No recovery. :-(
I can get into the system via down vol+Power and Back+Power, but that's it.
I'll see if Droid Explorer can see anything.
From what I see, Droid Explorer requires the system be booted.
TheForgotten said:
Your SPL is perfected so you cannot fastboot. Do you have a recovery that you can boot into?
As far as your fast boot problem goes look at this :
Click to expand...
Click to collapse
Will I tried that to see if it would work. It actually gives me the option to start the flash.
The first section to flash is SYSTEM. It starts unzipping and stops right there and hangs.
Oh, I am not sure if this changes things, but the entire top data when at FASTBOOT is:
SAPPHIRE UNKNOWN 32A ENG S-ON H
HBOOT-1.33.2010 (SAPP31000)
CPLD-13
RADIO-3.22.20.17
Jun 2 2009, 17:27:03
Any ideas or advice?
Have you tried entering recovery through AndroidSDK?
If you mean
"fastboot boot recovery.img", yeah. Is there a good recovery img I should use?
It doesn't seem to do anything when I try it. No error. It appears to work, but the phone does nothing.
Armon_Ra's recovery Heres a link: http://forum.xda-developers.com/showthread.php?t=530492. You have a 3.22 version radio so dont use the Hero recovery like he tells you even though you have a 32a (hero version is meant for 6.35 RaDIO)
Hi,
Something went wrong while flashing a new recovery image now i am unable to enter the recovery the phone just stays in the splash screen. When i try a normal boot its the same problem just the splash screen..
I can enter fastboot but i dont have an engineering SPL on it, what are my options ?
Details:
PVT 32B S-ON
HBOOT-1.33.0004 (SAPP10000)
RADIO-2.22.19.261
When i try to fastboot a new recovery image it says "permission denied" i think that this is because of the non engineering SPL ?
ps. Phone is rooted a long time ago, never had any problem flashing.
SOLVED
I booted amons recovery true fastboot and overwrite the wrong recovery image, then i flashed a good rom..so the phone is alive again.
Topic closed
Currently I am using:
saphire pvt 32a eng s-off n
hboot-1.76.2007
cpld-12
radio-6.35.10.18
Aug 21 2009,18:19:15
Suddenly my device stop of work, it doesnt load the operating system and it just said "HTC MAGIC" in boot screen.
In fastboot mode, the comand "adb devices" doesnt detect the phone so I can reload the recovery.
PD: Also I can't start the phone in recovery mode... the phone just doesnt do nothing.
Can anyone help me to recover the phone?, any Idea of what is causing this problem? why adb doest detect the phone in fastboot mode?
Thanks!!!