Everyone,
Just for the record if your on screen rotation is not working please check if your HERO has a cover on it !!!
May sound silly I know, but I (and many others) have now found that if you have a clip over phone pouch (The type that has a magnet in) then when you put the HERO into its case the screen rotation does not work !! Take it out again and VOILA !! it works.
The magnet seems to interfere with the HERO phones rotation.
I have now solved the issue by taking out the magnets and replacing with round sticky velcro pads.
Thought you should all know just in case anyone out there is having the same mind blowing issues I had for 2 weeks !!!.
Regards
Ray
Just saved me resetting my Hero to factory default.... to try and fix a problem which it would appear wasn't real in the first place....
Cheers
Phil-w
Related
Hi,
I've got the 9100 for a month now.
and everytime when the phone rings, the screen go automaticly to landscape mode, and the send button is not responding.
i can anser only frem the "answer" button on the screen which is now on the top left corner.
it doesnt happend all the time, but its very annoing.
any help?
thanks
Have you tried a hard reset ?
Hahaha... I know where this is coming from...
You are using the TERRIBLE useless case that comes in the box right? Its magnets cause the screen to flip around... your unit is A-OK.
By the way, you store your unit screen facing out or facing your body? Try changing directions if you insist on using this stupid case (I am using it also but I am looking for a better one).
Has anyone found a better case for the KJAM/QTEK 9100?
I had the problem with the case, too...
But it doesn't explain the send button not working - that's happened to me also, which is damn annoying when you're trying to answer the phone!
oh, and I'll be writing a review of the PDAir case as soon as it arrives... Fingers are crossed!
ooh
It really make sense, the magnet thing.
i don't usually put the device on specified side.
but i will try to notice it from now.
in that case, what about the car holders that uses magnet to hold the device?
Give it a try, use the cases magnets to find the spot on the KJAM that flips the screen. It seems that the sliding keyboard uses a magnet to let the device know it is open and to flip the screen.
The included case is such a useless case. I am sure that NO ONE at HTC actually tested the usability of the case WITH the KJAM inside in an everyday usage pattern...
Also, I am not sure if the magnets don't harm the device..
Many many thanks you very clever and helpful people!!!
I was on the verge of getting on to eBay and letting the top bidder have my XDA Mini, because of this switching lark, but I've tried what has been posted here and sure enough, it is the magnets.
So I'll get a better case and keep the device which I think is excellent.
Thanks again!!
:lol:
yea
it helped
please give us a recommendation for a good case
thanks
Yeah.. would like to hear about a good case...
I was thinking about one of these:
http://www.proporta.com/F02/PPF02P05.php?t_id=302&t_mode=cat
Anybody uses them?
I am an ex Blue Angel owner, and i have had the Wizard for about 7 months now, and the phone is perfect (size, battery, keyboard), however there is one problem that has been bugging me.
I use the standard case, as i like the format. however when i recieve a phone call and i remove it from the case, the screen 8 times out of 10 turns to landscape then back to portrait, and this prevents me answering the phone for 30 seconds or so until the screen turns back, as the hardware buttons dont respond. However i never figured what cused this, until i read through an unrelated post that it was caused my the magnets in the case. and testing this by waving the case over the surface of the phone reproduces this problem.
now i am stunned that they bundled this case with the phone, and i am in the market of looking for another without the magnets i.e snap button.
does anyone know of an an alternative case that is horizontal that has the same belt clip?
i have seen the Krussel Horizontal Case http://www.addonsworld.co.uk/product.php/21636/3384/, but i dont like the detachable belt clip. as i envisage the phone coming off it unlike a vertical case that has gravity and a low pivot point keeping it steady.
has anyone got any suggestions?
I've got the same probleme with my qtek 9100.
Hi Fuzzy [EDIT: and Alex],
some weeks ago I did a search for HTC Wizard on Froogle, and I found a lot of accessories: aluminium hard-cases, new styluses, loudspeaker mountings, modfied desktop stands...
Case-specific search:
http://froogle.google.com/froogle?q=htc+wizard+case&btnG=Search+Froogle
I am sure there is a case that fits your needs.
Greetz
Raubi
unfortunately i have looked through all the 8 pages of hits and there is not a case that is suitable. the nearest to what i want is a case made by sena http://www.senacases.com/cart/home.php?cat=413 however it itself has a magnetic clasp, so will most likely result in the same problem
I want a case like the original with same type of belt clip and without a magnetic clasp. Does anyone have or use such a case, or can confirm that the sena cases arent afflicted with the same problem.
Turn your phone over!!!
When you put the phone in the OEM case, have the screen facing your body (away from the magnetic clasp). This will accomplish 2 things:
1. Prevents the magnet from activating Landscape Mode.
2. Provide extra protection from direct impact for your screen.
I have always done this and never experienced the Landscape issue.
For me that doesnt work, infact it makes it worse i've just removed the phone like that from the case a few times and it change orientation every time. the magnet is contained in the flap and it triggers the screen change every time weather it brishes past the back or the front of the phone.
I have just bought the Krussell case from my first post after not succeeding finding an alternative, i think that with a belt clip it will be unsafe and will stick out much further than the original case, however it does have loops to loop belts through, so that may be the tradeoff i need.
I will let you know how i get on when i recieve the case next week.
what i am most surprised at is either HTC or the mobile carriers not picking up on the problem and selecting a different case.
but the one thing i have figured is that if the magnet is contained purely on the pouch and not the flap (i.e. the flap has metal in it) then this problem would not happen. and if i twisted the phone away from the case when removing it... and ...and ...and..... there would probably be lots of ways to get around it not happening, but in the real world in everyday use when i remove the phone it does happen and it causes me to miss lots of phone calls...
Hi All,
I have updated to the latest AKU3 ROMs and also a few months ago I replaced the housing...However, I've noticed that the screen does not automatically rotate when the screen is swivelled??
Now is this because I did something during re-assembly of the housing OR is there something in the ROM's that disables the hardware somehow??
Cheers
ODY
Unlikely to be the rom, since it's part of the system HTC provided.
If it's been disassembled it's more likely that.
V
vijay555 said:
Unlikely to be the rom, since it's part of the system HTC provided.
If it's been disassembled it's more likely that.
V
Click to expand...
Click to collapse
hey VJ, sorry to bother but do you know what jumper/cable/connector/switch to jump/disconnect/tape inside the Universal to keep it from switching?
I'm sure I saw someone mention that the screen rotation is done by a magnet and switch? It's possible that maybe a small magnet fell out during disassembly? But I have looked throught the Universal repair manual and I can't find any reference to such a magnet??
I'd be nice to know exactly where it is so one would be able to take it out, if it were easy. I don't know if I wanna disasemble mine yet...
EDIT found it!! If you use a very, very light metal chain, as I did, with a keyring @ end, you can hover it around the Universal and see the tension of the chain when it's near the magnet. the keyring sticks too!
it's on the lid, behind the video-call video camera. I'm going to check the lid part of the manual.
Well taking the screen section apart is easy! You don't have to disassemble the whole unit. Looks like my magnet fell out then! Trouble is I want to sell mine so I'll just have to declare the auto screen rotate doesn't work (I've made sure that there is the rotate screen icon on the task bar though!!)
Cheers
Ody
odyseus said:
Well taking the screen section apart is easy! You don't have to disassemble the whole unit. Looks like my magnet fell out then! Trouble is I want to sell mine so I'll just have to declare the auto screen rotate doesn't work (I've made sure that there is the rotate screen icon on the task bar though!!)
Cheers
Ody
Click to expand...
Click to collapse
it works!! I tested it with the very small and highly magnetic point in the bezel of my tablet PC (to hold the pen) and it did change orientation.
thing is that it seems to be stuck beside the sound-holes (when the unit is closed).
I wonder how could I disassemble the lid only? are none of those screws @ the bottom connected to the back part of the lid? if so, that would be awesome!
Hi, on the xda's ftp, you'll find the maintenance manual for Universal...may help you to disassemble yours
thanx for the link!
however, it seems rather risky to try to pry the bezel open while still on the unit. Anyways I'm doing it right know. I'll get back to you.
I did pry it out and took the magnet off... painless(*) procedure and flea-sized magnet! don't loose!
I took a couple of pictures detailing the magnet position and the lid disassembled while still on the unit.
if you want to do this procedure do not loose the tiny screws and...
(*) be careful with the outer speaker (the one that lets you hear a call while the screen is facing the keyboard when closed), it isn't hard wired, it's just two small and fine contacts that might get distorted when putting the lid cover back... I had to take mine out again to correct this problem.
also, be careful with the screw driver and digitizer, as you'll be working in very akward positions to avoid disassembling the whole unit, and take off the battery of course.
Thanks for the photos - looks like my magnet feel out so I bought some 1/8 inch square magnets from ebay. It took a couple to find the sweet spot where the screen rotated but at least it works fibe now!
Cheers
Ody
odyseus said:
Thanks for the photos - looks like my magnet feel out so I bought some 1/8 inch square magnets from ebay. It took a couple to find the sweet spot where the screen rotated but at least it works fibe now!
Cheers
Ody
Click to expand...
Click to collapse
no problem. I'm also going to put the magnet back, now the unit doesn't now when it's closed, and therefore the outer speaker does not work. the screen also does not turn off when closed, only when the system timer tells it too... oh well.
you can turn the screen off by pressing the power button briefly.
no ext speaker though! maybe there's a way in software to disable just the rotation; i think the guys trying to get linux comfortable on the universal have some experience with it, maybe they can help.
hey i was just wondering if someone could help me out here, ive searched around with no luck. I replaced my wing's housing because my old one was all scratched everything works fine but i have one problem when i slide out the keyboard the screen doesnt go to landscape mode and i have no idea whats broke checked all the cables and stuff and its all pluged in, the keyboard works just wont rotate the screen thanks
You can try a hard reset, which should cure any software problems.... but if you were messing with the phone and taking it apart in order to replace the housing ... it sounds like a hardware issue.
its defenitely hardware related just not sure what it could be not sure where the thing that operates the screen and turns it when the slide is open would even be
I had the same problem. Their is a little round magnet in the front housing that you forgot to swap from the old case. Its hard to notice but its in one of the corners in the screen side housing. its under the OK button, under the circuit board. on the actual sliding plastic housing. you'll see a small round recces thats where the magnet goes.
the wing has a Prossesser Of 200Mhz, so what that means is its pretty slow.. just uninstall unused programs and End programs that your not using. Its also possible that your firmware might not Support Sliding.
hi guys,
i just replaced the casing on my dopod 838 pro. though i seem to have two problems. first is that my keyboard won't light up anymore and 2nd when i open my keyboard, the screen won't rotate to the portrait view.
can anyone help me???
First check that all connections are made inside the housing.
Maybe you just forgot some plug.
greetz
playdo
Yes and you forgot to move the screen orientation magnet from the old case to the new one!!
See here:
http://forum.xda-developers.com/showpost.php?p=1449001&postcount=6
Mike
.... so let's hope he didn't throw away the old case!!