X2 problems continue - XPERIA X2 General

i just plug out my xperia from charger and it wont start.
When i press button for start only red light on upper side blinks nothing else happens.
I've tried to manually reset phone it doesn't work also red blinks.
What happened? What to do?
tnx

This means that the battery is fully discharged

Are you charging from PC USB-port?
Try using the wall charger, not all USB-ports are able to supply enough power. The phone may indicate charging while it is not due to lack of proper voltage.

Thanks guys it workssssssssssssssss

despot032 said:
i just plug out my xperia from charger and it wont start.
When i press button for start only red light on upper side blinks nothing else happens.
I've tried to manually reset phone it doesn't work also red blinks.
What happened? What to do?
tnx
Click to expand...
Click to collapse
Make sure your wall out let charge is at least 1.A,if below than 1.A it will not good charge for your battery , I have one .750A come in with my X2 it doesn't good charge,I have go to Electronic store buy a 1.A charge ,you can try that.

Related

Notification LED red.....MDA dead

Help....seems that my Magician is dead....making a long phone call (1 h) after call end, display switch off and Notification led become fix Blue (bluethoot was off) and then i try to hard reset. Led switch off and no results. I try then to put the power supply cable and the led become RED.... !!! (neve seen red.....) pda is not switching on anymore...any details on the reason of this RED light ???....please.....
thanks in advance
Red LED means the battery isn't connected or the device can't charge.
Try taking the battery out for a few hours and try to switch the device on again.
My brother in-law had the red LED issue too, we solved it by 'kick starting' the battery with two wires and a 9v battery. (At your own risk of course).
Good luck!
helterskelter said:
Red LED means the battery isn't connected or the device can't charge.
Try taking the battery out for a few hours and try to switch the device on again.
My brother in-law had the red LED issue too, we solved it by 'kick starting' the battery with two wires and a 9v battery. (At your own risk of course).
Good luck!
Click to expand...
Click to collapse
Red Led doesn't mean that the battery is not connect with the device. It simply means the cover is not properly intact. Try taking out the battery off the device, put it back in the slot. Place the cover carefully and completely. And then connect the device to AC power supply. It would definitely come *alive*
still dead....grrrr
so cover is ok...it seems to be properly fixed, even the smal swithch that create some unwanted crash few months ago is now working properly...
i made a 1 h long phone call with battery and charger (usb from pc) and after line felt down, bluetooth led blue on (was off) and screen with phone but no changement by touching it. so switch off by power off and ...dead...now without battery but with charger (or usb from PC) RED led on. With batttery AND charger RED on, and with battery all dead. i cannot reset anyhow with or without battery /charger....need it...sh*t.....(ops...sorry)
thanks a lot anyway....
omino_ribelle said:
so cover is ok...it seems to be properly fixed, even the smal swithch that create some unwanted crash few months ago is now working properly...
i made a 1 h long phone call with battery and charger (usb from pc) and after line felt down, bluetooth led blue on (was off) and screen with phone but no changement by touching it. so switch off by power off and ...dead...now without battery but with charger (or usb from PC) RED led on. With batttery AND charger RED on, and with battery all dead. i cannot reset anyhow with or without battery /charger....need it...sh*t.....(ops...sorry)
thanks a lot anyway....
Click to expand...
Click to collapse
what I will suggest is, you should get a new battery instead!!
Got the same problem now!
Both my wife and me got a Magician. Hers is dead now - same symptoms.
First guess was dead battery as well. But I exchanged it with mine fully loaded. No difference!
Usually when you plug the powercord into the device orange flashes up and device boots. Here nothing happens.
I'll have some electrician have a look at both. Maybe he can find the fault by comparison. But I don't expect a lucky outcome.
on back side of ur device when u remove the battery cover, u see a small black switch on the right side just next to the battery.
put the device on charge..with cover off---it will show red light contunuously on.
now manually press gently that black switch and see if ur device starts to charge.
if u see a yellow light any point of time doing this u may have to get this little switch repaired or do a temporary work urself by kepping it at place manually bu something.
try and tell
Now it works!
I think we all knew about that little switch. But thanks for your thoughts.
Anyway, hers is running again!
Two days ago I took it fully apart. No obvious fault noticeable. I left it the way it was now to prepare it for shipping. Today my wife asked me I should try it just once again. So I held the battery on the connector and plugged the USB cable and then: it booted!
But the internal battery doesn't seem to recover. It stays at 0% (1h "charging" since then).
I have to correct myself: Even the internal battery is charging (but it takes its time).
my magician is also dead and just the red LED is burning when i put it in the USB! Can anybody help me?
Still ned solution!
Can some one who was having the same problem help?
your device battery detector switch(little switch) is broken or logged-out of Main Board.
when it broken,the red LED is on at all.
it is the greatest weakness of magician...
z_qz54 said:
your device battery detector switch(little switch) is broken or logged-out of Main Board.
when it broken,the red LED is on at all.
it is the greatest weakness of magician...
Click to expand...
Click to collapse
i am opening my jam case,bring the switch out and conecting sides of switch by a piece of wire.now a day there no problem with openning the battery case or.. but my WM cant recognize the battery level.it's alway 0%.and even the charger is connected no orange led i can see.but the charger charge the battery and battery works for more than one day!!!!!!!!
any one with the same problem!????
or any one having solution!
REGARDS
I'm gettingn red led light too when charging from wall outlet. Charging from usb is fine. a weird thing is when my battery came down to 50%, imate jam will shut down and won't successfully reboot. some people from this form mentioned it's an indicator that the battery is dying.

My Hermes does not power on :(

SITUATION
My Cingular 8500 does not power on. I have tried connecting it to wall charger as well as USB cable. The red or the orange light also does not come on. I tried all resets also but nothing worked.
BACKGROUND
a. My phone suddenly went off when I was opening the sliding keyboard. It had a decent (60%) charge at that time. After this it refuses to come on.
b. Only addition to the phone in the last 3 months has been a 2GB MicroSd Card. I inserted this card 4 days back and it was working fine.
c. The device is around 6 months old (but its unlocked, running WM6 and does not have any warranty)
d. I have been using the original wall charger to charge this phone regularly.
HELP REQUIRED
1. Is there a way to check if the problem is with the battery or with the phone? I do not have a spare battery.
2. Should any light come on if I connect the phone to charger without the battery inserted in it?
Thanks!
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
i have the same situation going on ... except with mine the screen faded out...it came back on once...and faded out again and will not turn back on.. when i put it on the charger it was a red light.. and will not turn on or soft reset, or enter bootloader or hard reset. .. in addition i tried the method above and nothing has worked.... any other suggestions...my phone was working fine when this happened out of nowhere... i dont have insurance either i bought the phone from someone off of craigslist..help is greatly appreciated
I am having the exact same problem, I had about 30% charge, then it just shut off, and now will not come back on under its own power or via USB nor charger. I tried connecting the charger then inserting the battery, but I do not get any indicator lights at all.
I was running WM6, and the most recent thing installed was the pointUI home screen replacement app.
has anyone experienced this before?
theconcon said:
SITUATION
My Cingular 8500 does not power on. I have tried connecting it to wall charger as well as USB cable. The red or the orange light also does not come on. I tried all resets also but nothing worked.
BACKGROUND
a. My phone suddenly went off when I was opening the sliding keyboard. It had a decent (60%) charge at that time. After this it refuses to come on.
b. Only addition to the phone in the last 3 months has been a 2GB MicroSd Card. I inserted this card 4 days back and it was working fine.
c. The device is around 6 months old (but its unlocked, running WM6 and does not have any warranty)
d. I have been using the original wall charger to charge this phone regularly.
HELP REQUIRED
1. Is there a way to check if the problem is with the battery or with the phone? I do not have a spare battery.
2. Should any light come on if I connect the phone to charger without the battery inserted in it?
Thanks!
Click to expand...
Click to collapse
The Power LED should light up "red" other than that your wont get any juice. And read my second reply, try radioshack
Eamonn said:
I am having the exact same problem, I had about 30% charge, then it just shut off, and now will not come back on under its own power or via USB nor charger. I tried connecting the charger then inserting the battery, but I do not get any indicator lights at all.
I was running WM6, and the most recent thing installed was the pointUI home screen replacement app.
has anyone experienced this before?
Click to expand...
Click to collapse
It wont power on threw charger without a "good" battery plugged in.
Sounds like u might have a bad battery. Happend to a friend of mine "different phone" just go to a local Radioshack If they have your type of battery and have one in stock they will most likely let you try one on your phone. If not just go to ATT wireless store and see if they have one you can try and buy.
demo23019 said:
The Power LED should light up "red" other than that your wont get any juice. And read my second reply, try radioshack
Sounds like u might have a bad battery. Happend to a friend of mine "different phone" just go to a local Radioshack If they have your type of battery and have one in stock they will most likely let you try one on your phone.
It wont power on threw charger without a "good" battery plugged in.
Click to expand...
Click to collapse
I really hope thats the problem because it's an easy solution, otherwise I fear it might be toast. thanks for your advise
No light when connected to charger
Thanks all for your responses!
markafreeman said:
Try this:
1.) Remove battery
2.) Connect Hermes to charger or USB
3.) Insert the battery while Hermes is connected to charger
4.) Red light should turn Amber
5.) Soft Reset
Click to expand...
Click to collapse
Dear Markafreeman, I tried the entire routine above but no help.
demo23019 said:
The Power LED should light up "red" other than that your wont get any juice. And read my second reply, try radioshack
It wont power on threw charger without a "good" battery plugged in.
Sounds like u might have a bad battery. Happend to a friend of mine "different phone" just go to a local Radioshack If they have your type of battery and have one in stock they will most likely let you try one on your phone. If not just go to ATT wireless store and see if they have one you can try and buy.
Click to expand...
Click to collapse
Dear demo23019, I am not sure if I understand the above correctly. Should the Power LED light up "red" when battery is not inserted?
Once I connect the phone to charger (wall or USB), without the battery inserted in it, no red light comes on.
Does this mean that there is some problem with the phone hardware?
theconcon said:
Dear demo23019, I am not sure if I understand the above correctly. Should the Power LED light up "red" when battery is not inserted?
Once I connect the phone to charger (wall or USB), without the battery inserted in it, no red light comes on.
Does this mean that there is some problem with the phone hardware?
Click to expand...
Click to collapse
Yea the power LED should light up red with out a battery plugged in. Check the usb plug on the bottom of your phone, make sure the middle piece inside is still there and didnt break off.
demo23019 said:
Yea the power LED should light up red with out a battery plugged in. Check the usb plug on the bottom of your phone, make sure the middle piece inside is still there and didnt break off.
Click to expand...
Click to collapse
Oops. My phone's power LED does not light up when I connect it to the charger without the battery inserted in it.
I have checked the following :
a. usb plug is fine (I checked it by plugging it into the Y cable for the USB charger. The LED on the Y cable lights up when I connect the USB plug into it
b. The middle piece inside the socket at the bottom of the phone is still there and shows no signs of damage.
c. The wall charger is also working fine.
Does this conclude that the phone has a hardware fault and this is not linked to the battery being dead?
Similar Problems
I just had the same problem. I had it happen to my Att Tilt and then to my cingular 8525. You should check out this thread and maybe post your info there too, it would be nice to see everybody post in the same thread so we can figure out what's going on.
http://forum.xda-developers.com/showthread.php?p=1783005&posted=1#post1783005
yh
yh i got the same problem, i touched the power button so it wld go into standby, and it then refused to turn back on, even when i soft resetted it. Plugged it into the wall charger without the battery and there is no red power light coming on.
I've got a MDA Vario II and though im gettin a replacement, it kinda sucks as it seems im gna lose all my data
can we try to determine in more detail what people installed before they experienced this?
I just pulled it apart, and cleaned the inside to no avail, nothing seems to be awry, atleast not to my untrained eye, however it did get me thinking.
I listen to music on my tytn all the time, and over time the usb connector has become quite loose, frequently losing connections over activesync and music comes and goes from both lef and right. if the USB connector is shot, then when I plug it in it won't register that there is power, nor will it have the power to light up the red light indicating there is no battery. also, if the usb link is shot, then the phone wasn't charging so my battery is likely dead.
now to test this out I need to have a verified 100% charged battery.
I currently have the same problem. It will not charge via wall/usb. It flashes red once and that's it. Without the battery and plugged in, I get a solid red light. I tried plugging it into the wall charger without a battery and then putting my battery back in. The red light just turns off. That's it. I can get an active sync connection with a dim white screen, but I do not have enough juice to try flashing a new rom. If anyone has issues like these, are you also able to get an activesync connection?
TIA
EDIT: Is it possible to bypass the low battery protection when flashing a rom? My battery is somewhere around 40% so it would be safe.
Update:
Okay, I purchased a new oem battery and a battery charging dock. This way I can charge the battery without the phone before I attempt to flash a new rom.
I still would appreciate it if anyone who has seen these symptoms (white screen BUT with lots of vibrating / no charging / no bootloader) could give me a few pointers. I've exhausted the Wiki and so far it seems my only option to save the phone is to flash a new rom. Thanks in advance to anyone willing to give me some advice.

[Q] Please help Droid X won't turn on when pressing power buttom

I turned my DX off for a few minutes and now I am unable to turn it back on. I hold the power button and the screen remains black, no M logo no boot, no green LED light, no activity of any kind, just a black screen.
Battery was at 100% when I turned it off ( 20 minutes ago)
GB leak rooted working fine
Tried: Pulling battery, holding power and home buttons then the camera, volume down and power buttons with no response of any kind.
Please help.
Hold down both volume keys power and home key until you see a brief flash, then let go, can you get the bootloader screen to show up? Have you pulled the battery?
It did not work.
I pulled the battery and left out for a few minutes with no results.
I also remember that before this thing happened when I pulled the battery and plug in the wall charger the screen would show a battery icon with a question mark, now I got nothing but the black screen.
The only response that I have noticed when trying your tip is that without the battery when i plug in the charger the green led blinks once.
I am starting to feel that this is hardware related.
Keep the battery out. Plug in the WALL charger, not through USB. (yes, I know it's a USB cable that goes into a converter to use an electrical outlet; the point is, hook it up to an actual electrical outlet)
If you don't get the big battery indicator for charging coming on the screen, hit power once. Still not, hold power down a solid 5 seconds. If still no go, then you have a hardware problem. Also, try using a different USB cable just in case if this doesn't work.
Roland Deschain said:
Keep the battery out. Plug in the WALL charger, not through USB. (yes, I know it's a USB cable that goes into a converter to use an electrical outlet; the point is, hook it up to an actual electrical outlet)
If you don't get the big battery indicator for charging coming on the screen, hit power once. Still not, hold power down a solid 5 seconds. If still no go, then you have a hardware problem. Also, try using a different USB cable just in case if this doesn't work.
Click to expand...
Click to collapse
I just tried your instructions by the letter and on top of that I also used a straight (non USB) charger. No response.
I have a dead fish that is going back to the store.
thanks for your help

Problem with charge battery

Hiho,
go to the problem:
I changed the original rom to CyanogenMod (NIGHTLY EUROSKANK [21/12/12]). used one month, until one day I was playing, and the battery was low, so I left him there, went to sleep. I woke up, and he was discharged and placed in wall charger, and went to watch. some hours later, I tried to turn on, and nothing happened, I thought I plugged the charger in the wrong way, I put to charge again, and noticed that out instead of white LED appears, was the red led. Loading left for some hours, I turn on and nothing happened .. (@! #! @ # $) And then plugged in the USB, and lit the white LED, and could not access it.
I did the MacGyver method, to bootloader battery, and did SBF flash:
" JDGC_U6_2.12.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANGCCORE_P013_A033_HWp3_Service1FF.sbf ", was all right for some time, when I put it to charge and lit the red light again, and then pulled the plug, and he hung up. and is now well. and no more MacGyver mode solves the bootloader
Please help
Sorry for the horrible english, I'm using google translate.:silly:
And also the huge text (I would explain how it happened)
can someone help?
cosaki said:
Hiho,
go to the problem:
I changed the original rom to CyanogenMod (NIGHTLY EUROSKANK [21/12/12]). used one month, until one day I was playing, and the battery was low, so I left him there, went to sleep. I woke up, and he was discharged and placed in wall charger, and went to watch. some hours later, I tried to turn on, and nothing happened, I thought I plugged the charger in the wrong way, I put to charge again, and noticed that out instead of white LED appears, was the red led. Loading left for some hours, I turn on and nothing happened .. (@! #! @ # $) And then plugged in the USB, and lit the white LED, and could not access it.
I did the MacGyver method, to bootloader battery, and did SBF flash:
" JDGC_U6_2.12.0_SIGNED_USAJRDNPRCB1B50AA039.0R_JORDANGCCORE_P013_A033_HWp3_Service1FF.sbf ", was all right for some time, when I put it to charge and lit the red light again, and then pulled the plug, and he hung up. and is now well. and no more MacGyver mode solves the bootloader
Please help
Sorry for the horrible english, I'm using google translate.:silly:
And also the huge text (I would explain how it happened)
Click to expand...
Click to collapse
Hi,
Sorry but in case you don't know, when the phone is discharged (under 7 or 10%) and when we plug it, it's normal to have red led. But you must have the "battery charging animation" with percentage when it charges... When it's charged enough (above 7 or 10 %) you can turn on the phone (power button long press).
Your battery could be dead, yes... But :
How old is your battery ?
Have you checked your wall charger ?
Is your USB cable charges your battery ?
Is your battery charges well with your original SBF (without CM) ?
If you know someone else who owns a Defy, you could test with his battery and his wall charger....
Your USB connector could be damaged....
Need some more informations to help you....
@fpriot said:
Hi,
Sorry but in case you don't know, when the phone is discharged (under 7 or 10%) and when we plug it, it's normal to have red led. But you must have the "battery charging animation" with percentage when it charges... When it's charged enough (above 7 or 10 %) you can turn on the phone (power button long press).
Your battery could be dead, yes... But :
How old is your battery ?
Have you checked your wall charger ?
Is your USB cable charges your battery ?
Is your battery charges well with your original SBF (without CM) ?
If you know someone else who owns a Defy, you could test with his battery and his wall charger....
Your USB connector could be damaged....
Need some more informations to help you....
Click to expand...
Click to collapse
the cell completed one year this month (January / 13). I know that when the led is red because it is very low on battery. But let Loading 4 hours +. and when I connect to the computer it does not charge. it only illuminates the white LED, and can not connect or power on. anyway, the exchange led to suppose that shows the usb part is okay. I've used various chargers.
I can not run the SBF, why he does not recognize.
The phone is not turning on. apparently only led.
Re: Defy Battery dead?!
cosaki said:
the cell completed one year this month (January / 13). I know that when the led is red because it is very low on battery. But let Loading 4 hours +. and when I connect to the computer it does not charge. it only illuminates the white LED, and can not connect or power on. anyway, the exchange led to suppose that shows the usb part is okay. I've used various chargers.
I can not run the SBF, why he does not recognize.
The phone is not turning on. apparently only led.
Click to expand...
Click to collapse
Try another battery... Your system could be corrupted, I mean, it seems your phone can't charge in 0-7 % step, so it will never boot... Dunno why, it could be an issue even if I don't really think so... But, to save your phone it's the better thing you can do. Couldn't you borrow someone's Defy battery ? A friend ? A shop ? Then you could test !
Sent from my Defy MB525 green lens
@fpriot said:
Try another battery... Your system could be corrupted, I mean, it seems your phone can't charge in 0-7 % step, so it will never boot... Dunno why, it could be an issue even if I don't really think so... But, to save your phone it's the better thing you can do. Couldn't you borrow someone's Defy battery ? A friend ? A shop ? Then you could test !
Sent from my Defy MB525 green lens
Click to expand...
Click to collapse
I got a battery from a friend, who possesses defy red lens, same as mine.
nothing. still does not power on.
cosaki said:
I got a battery from a friend, who possesses defy red lens, same as mine.
nothing. still does not power on.
Click to expand...
Click to collapse
OK
Did you try to unbrick your phone with this thread ?
@fpriot said:
OK
Did you try to unbrick your phone with this thread ?
Click to expand...
Click to collapse
I can not because the phone only comes in the boot when it is plugged into the wall charger. when I connect usb, it only illuminates the white LED. and I can not get into the boot or do anything.
cosaki said:
I can not because the phone only comes in the boot when it is plugged into the wall charger. when I connect usb, it only illuminates the white LED. and I can not get into the boot or do anything.
Click to expand...
Click to collapse
Are you sure you can't do any of these two steps (3 or 4) of the "bricked defy Step by Step Walkthrough" thread ??
Even the 4th ?
[...
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
...]
If not, even with a charged battery, I 'm afraid your defy has a hardware issue...
Is your power button still alive ?
@fpriot said:
Are you sure you can't do any of these two steps (3 or 4) of the "bricked defy Step by Step Walkthrough" thread ??
Even the 4th ?
[...
3.First shutdown your phone, hold the Vol down and boot the phone up keeping the volume down pressed. you should come up to a triangle android logo, press the vol up and down key and then tap the screen ( this is a touch screen gui), choose the wipe data/cache and press ok, this should take up to 5 minutes.
4. Now, shut down the phone (pull the battery out and return it back in), Hold the Vol Up button and power up your phone.
you will enter the Bootloader (or BL as its called in the forums) and you should see the phone stating that (usually 9.10 version)
...]
If not, even with a charged battery, I 'm afraid your defy has a hardware issue...
Is your power button still alive ?
Click to expand...
Click to collapse
Power it on, when connected to wall charger. sometimes starts, sometimes they're showing is charging (the battery symbol with percentage in the middle). but I just pull it off. ie power on it, just in wall charger.
if a hardware problem it would not mind at all. (I think)
cosaki said:
Power it on, when connected to wall charger. sometimes starts, sometimes they're showing is charging (the battery symbol with percentage in the middle). but I just pull it off. ie power on it, just in wall charger.
if a hardware problem it would not mind at all. (I think)
Click to expand...
Click to collapse
Sorry but I can't help you anymore. Don't have more ideas...
Hope you will find the culprit...
See you
@fpriot said:
Sorry but I can't help you anymore. Don't have more ideas...
Hope you will find the culprit...
See you
Click to expand...
Click to collapse
Thank you for your attention. I hope someone can help me!
thks a lot
anyone who can help me?

Nexus 4 Died Fix

Hi,
I need help:
my nexus 4 was in charging overnight, hen i came up this morning, he was still fully functional.
aftr an hour, i came to use it again, it i saw that it was dead.
i have tried the fixes for the problem (to hold vol down and power byttons, an after 15 seconds to insert Cable and all this stuff, didn't worked).
i dont know what else to do!
im freaking out!
thanks for help
Can you turn your device on? If you plug in the charging cable, did it charge? And what about bootloader mode?
CCody said:
Can you turn your device on? If you plug in the charging cable, did it charge? And what about bootloader mode?
Click to expand...
Click to collapse
Nothing :/
the device wont turn on, the device wont charge (i have tried different socket/desktops, and also different chargers), and i cant boot into bootloader / recovey mode.
Note: when i performed the steps on the internet, when i plugged in the cable, the Red LED light in turning on for about 15-20 seconds, and then turning off.
what can i do except for going to a lab?
xph11 said:
Nothing :/
the device wont turn on, the device wont charge (i have tried different socket/desktops, and also different chargers), and i cant boot into bootloader / recovey mode.
Note: when i performed the steps on the internet, when i plugged in the cable, the Red LED light in turning on for about 15-20 seconds, and then turning off.
what can i do except for going to a lab?
Click to expand...
Click to collapse
You can try this, if you didn't have already:
- Plug your phone to the charger while holding down the volume down button. Your device should boot into bootloader mode.
- If the above doesn't work, then let your phone charge for half an hour and try it again.
CCody said:
You can try this, if you didn't have already:
- Plug your phone to the charger while holding down the volume down button. Your device should boot into bootloader mode.
- If the above doesn't work, then let your phone charge for half an hour and try it again.
Click to expand...
Click to collapse
i have tried it and it didn't worked.
i will try in half and hour again like you said. (but i dont think that the phone is charging at all)
also, when i tried you steps, the Red LED blinked a few times when i inserted the cable in, and then its turned off.
xph11 said:
i have tried it and it didn't worked.
i will try in half and hour again like you said. (but i dont think that the phone is charging at all)
also, when i tried you steps, the Red LED blinked a few times when i inserted the cable in, and then its turned off.
Click to expand...
Click to collapse
When you plug the cable in, you must press down the volume down button simultaneously. Not just only plug the cable in.
CCody said:
When you plug the cable in, you must press down the volume down button simultaneously. Not just only plug the cable in.
Click to expand...
Click to collapse
i know that what i did.
i pressed and hold the volume down + power buttons, and while holding them, i inserted the cable.
xph11 said:
i know that what i did.
i pressed and hold the volume down + power buttons, and while holding them, i inserted the cable.
Click to expand...
Click to collapse
Alright :good:
CCody said:
Alright :good:
Click to expand...
Click to collapse
ok, i tried again now, and the Red LED is now on, and its not turning off.
its mean that the device is charging now?
im not touching it, im afraid to mess up something hahaha
xph11 said:
ok, i tried again now, and the Red LED is now on, and its not turning off.
its mean that the device is charging now?
im not touching it, im afraid to mess up something hahaha
Click to expand...
Click to collapse
Is the LED always on or only when you plug in the charging cable. I may have a slightly presumption...
CCody said:
Is the LED always on or only when you plug in the charging cable. I may have a slightly presumption...
Click to expand...
Click to collapse
since the LED truned on i didn't disconnected the cable from the device, and the LED didn't turned off.
i dont know if to remove the cable right now, because if it is finally charging, i dont want to stop it and mess it up again.
so what now?
edit: i didn't disconnected the cable yet. but the Red LED turned off.
xph11 said:
since the LED truned on i didn't disconnected the cable from the device, and the LED didn't turned off.
i dont know if to remove the cable right now, because if it is finally charging, i dont want to stop it and mess it up again.
so what now?
Click to expand...
Click to collapse
You are charging from the electrical outlet, are you?
Just let it charge for at least two hours, it is a good sign that the LED went on.
Furthermore this red LED also known as 'red light of death' is a common issue of Nexus devices. It's an indicator for the batterie not to charge or because there was a thermal shutdown cause by too much heat and you only can solve this by screw off your device.
I hope you dont must go this far. Just be patient and wait what happens after the charging period.
CCody said:
You are charging from the electrical outlet, are you?
Just let it charge for at least two hours, it is a good sign that the LED went on.
Furthermore this red LED also known as 'red light of death' is a common issue of Nexus devices. It's an indicator for the batterie not to charge or because there was a thermal shutdown cause by too much heat and you only can solve this by screw off your device.
I hope you dont must go this far. Just be patient and wait what happens after the charging period.
Click to expand...
Click to collapse
did you saw my edit?
xph11 said:
did you saw my edit?
Click to expand...
Click to collapse
Ya, I did. As I said, be patient, let it charge.
CCody said:
Ya, I did. As I said, be patient, let it charge.
Click to expand...
Click to collapse
i have just noticed that the phonr is not charging at all.
its like before the Red LED turned on for a few minutes..
Did you also try to charge it with another cable? Try again to press down volume down key and plug in the cable.
By 'not charging at all' do you mean, there isnt this batterie logo when charging?
Edit: Try this volume-down-plug-in-cable a couple of time. It may not work the first time you do it.
CCody said:
Did you also try to charge it with another cable? Try again to press down volume down key and plug in the cable.
By 'not charging at all' do you mean, there isnt this batterie logo when charging?
Edit: Try this volume-down-plug-in-cable a couple of time. It may not work the first time you do it.
Click to expand...
Click to collapse
tried, not working.
when the phone i connected to charger, there is no LED light or somethinh on the screen.
xph11 said:
tried, not working.
when the phone i connected to charger, there is no LED light or somethinh on the screen.
Click to expand...
Click to collapse
I am sorry. I don't know what to do else. You may send your device to LG or Google...
Thank you anyway
Anyone else knows what to do???
xph11 said:
Thank you anyway
Anyone else knows what to do???
Click to expand...
Click to collapse
search "red light of death".
leaving it on the charger might fix it. taking off the back cover, disconnecting the battery, then reconnecting the battery is an almost 100% fix.

Categories

Resources