Related
So, I have PocketShield installed and it's set to slide or light unlock and answer. Quite often when I get a call it takes so long to unlock and answer, the person is gone...
There are maybe a few options -
1) I've installed and uninstalled so much stuff, maybe I need to start fresh? I have noticed the HD is a little 'laggy' now. Should I hard reset and install things back on slowely, testing it's responsiveness as I go?
2) Maybe I should switch to S2U2? I used this for a long time on my Kaiser, but have been concerned by everyone saying it drains battery power.
3) Do I need a screen lock program? The device only wakes up on a phone call and now you have a slide to answer/ignore anyway. Do the hardware keys do anything at this point? Am I safe to carry it round in my case without a screen lock?
Does anyone else suffer from this, or just me?
Thanks for any help/advice in advance.
Having the same issue. Sometimes my slide option simply doesn't work first few attempts. My solution is to use the "answer call" key beneath the main screen until this gets resolved.
S2U2 works like a charm on the HD and it doesn't draw additional battery as far as I have seen over the past few days.
When u have a call, u don't need to slide so you unlock the device then accept/reject the call.
Depends on what you have set, you can either have the original accepting/rejecting HTC screen poping up to take/reject your calls,
or you can set it so u have a new slider appearing on the wallpaper of S2U2 to accept/reject the calls
Try it, you won't regret it guys.
Well, yesterday I hard reset my HD and installed just the stuff I wanted. I've gone back to S2U2 and everything seems much much better so far. The only annoying thing is sometimes the phone wakes in landscape mode still, even though it's set to not rotate in Gyrator (and doesn't when it's woken, it stays in whatever it is in.)
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Its a very well presented Screen Lock, that's why. The question is just how to go from that to answering a call...
Id I have S2U2 installed, and a call comes in on my HD, what happens? does s2u2 take over from the default "slide to answer" system?
Yes it does. I think the problem I had was it wasn't doing that properly before hand. They were obviously conflicting with each other and I was struggling to answer calls.
gt112 said:
Whats the difference between S2U2 and the phones default slide to answer phone ?
In other words, why install S2U2?
Click to expand...
Click to collapse
Well S2U2 will lock your phone screen and buttons so you do not start by mistake an application or a phone call when the device is in your pocket.
Even if by mistake u click on the power on button, ur device is still locked until u unlock it using a slider like on the i-phone.
It allows u to display a wallpaper of your choice, different then the one on your today screen or in TF3D. It allows u to display clock date, network signal, tasks, missed calls, SMS, etc ...
Try it, it's free and very nicely designed
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
vangrieg said:
I tried to use S2U2 and found that just like every other locker it is behaving wrongly after a call - it leaves the device unlocked! So if I listen to music and get a phone call I'll have to pull it out of the pocket to lock again. There is a silly option to lock after each call of course, but this is just stupid - I just want the device to stay locked until I unlock it - how difficult is this?
Funnily, the only locker behaving properly is the stock Windows one, but it has a backlight bug and switches the device to Home screen.
It's just amazing how nobody can do such a basic function right.
Click to expand...
Click to collapse
Just tried it few seconds before posting, called myself from the office phone, answered the call using the slider is S2U2, the screen turned off, I ended the call by pressing on the end call button on my HTC touch HD, and the S2U2 screen lock was there, the device was still locked.
It works perfectly with the touch HD.
Hi All
On all my previous HTC devices when I was switchin the device off with power button none of other buttons were active. So pressing them did nothing. Only way to wake the device up was to press power button.
On Leo that is not the case. Now I remember that option was somewhere in windows but it appears to not be there anymore. When I have phone in pocket volume still works so it goes up and down. It also today somehow managed to unlocked it self when in poclet of my motorbike leathers including sliding the screen to unlock. Then it started calling hte wrong person while I was on m-way. Not a good thing.
Any idea where that option is?!
Only way i have found around this is to install S2U2 and set slide to answer as only way to answer phone. This disables buttons when there is a call. There is also a cab file you can install to set s2u2 as the default unlock screen.
ruscik said:
Hi All
On all my previous HTC devices when I was switchin the device off with power button none of other buttons were active. So pressing them did nothing. Only way to wake the device up was to press power button.
On Leo that is not the case. Now I remember that option was somewhere in windows but it appears to not be there anymore. When I have phone in pocket volume still works so it goes up and down. It also today somehow managed to unlocked it self when in poclet of my motorbike leathers including sliding the screen to unlock. Then it started calling hte wrong person while I was on m-way. Not a good thing.
Any idea where that option is?!
Click to expand...
Click to collapse
If you are unlocking the lock screen, by sliding the slider all the way to one side, whilst it is in your pocket, then I suggest you get a priest to exorcise your pocket. This simply is not possible without your intervention.
I would suggest that you have come across the common (and very documented on this forum) problem of the lock screen not actually locking your device fully.
This is a known problem, with a 100% effective solution. Before you start a journey (which is obviously where this is most problematic for you) click start and then lock (the bottom left soft key). This re-enables the hardware lock. After that, it will work.
lindsaydr said:
Only way i have found around this is to install S2U2 and set slide to answer as only way to answer phone. This disables buttons when there is a call. There is also a cab file you can install to set s2u2 as the default unlock screen.
Click to expand...
Click to collapse
Will try s2u2 then
johncmolyneux said:
If you are unlocking the lock screen, by sliding the slider all the way to one side, whilst it is in your pocket, then I suggest you get a priest to exorcise your pocket. This simply is not possible without your intervention.
I would suggest that you have come across the common (and very documented on this forum) problem of the lock screen not actually locking your device fully.
This is a known problem, with a 100% effective solution. Before you start a journey (which is obviously where this is most problematic for you) click start and then lock (the bottom left soft key). This re-enables the hardware lock. After that, it will work.
Click to expand...
Click to collapse
My pocket is ghost free, as it is made of leather and in rain can get a bit moist it does work a bit on the screen.
Also if I select start and click lock all buttons still work.
ruscik said:
if I select start and click lock all buttons still work.
Click to expand...
Click to collapse
Yes, but you need to slide to unlock if the lock screen is working correctly. This will not happen by accident, in your pocket.
You can only unlock your phone with the hardware buttons if the known issue of the lock screen rears it's ugly head.
Doing what I said, before each journey, will make sure that you cannot unlock the screen with a simple button-press.
Since installing S2U2 a few days ago I've had even worse problems with ghost unlocks than before.
Previously the only issue was accidentally cutting calls off, but with S2U2 I had a text from a friend on Friday asking if I was drunk. Somehow, whilst locked in my pocket it unlocked and sent a gibberish sms!
Then today, it also somehow unlocked in my pocket and dialled my mum!
I'm just glad I wasn't playing Call of Duty when it happened or she would have just heard "Sh1t!!! You cheating f***!!! WTF??? You..... FFS!!!!" etc
But seriously - I love S2U2 from previous winmo phones but it's made my HD2 worse so I've uninstalled it tonight sadly.
Cret said:
I'm just glad I wasn't playing Call of Duty when it happened or she would have just heard "Sh1t!!! You cheating f***!!! WTF??? You..... FFS!!!!" etc
Click to expand...
Click to collapse
You're not as bad as me when I play COD/MW2 then, or you would have made several references to "the C word" lol
Cret said:
Since installing S2U2 a few days ago I've had even worse problems with ghost unlocks than before.
Previously the only issue was accidentally cutting calls off, but with S2U2 I had a text from a friend on Friday asking if I was drunk. Somehow, whilst locked in my pocket it unlocked and sent a gibberish sms!
Then today, it also somehow unlocked in my pocket and dialled my mum!
I'm just glad I wasn't playing Call of Duty when it happened or she would have just heard "Sh1t!!! You cheating f***!!! WTF??? You..... FFS!!!!" etc
But seriously - I love S2U2 from previous winmo phones but it's made my HD2 worse so I've uninstalled it tonight sadly.
Click to expand...
Click to collapse
Well it took me all but 45 min to realise my problem is still there with s2u2 but other things are even worse so back to stock lock.
I am quite certain that option must still be in there. It was a tick box that stated lock all buttons except power button.
johncmolyneux said:
You're not as bad as me when I play COD/MW2 then, or you would have made several references to "the C word" lol
Click to expand...
Click to collapse
No - I'm the same exactly. I just was trying to be polite so I didn't get told off here!
Hi,
I love my new HD2, but i've got the following problem:
The proximity sensor works doesn't work 10% of the time and because the touchscreen is so sensitive, i end up pressing random buttons with my ear or face. I've been manually locking the screen during calls which:
- is really annoying
- doesn't really solve the problem, screen lock during calls does not require slider to unlock, just a regular button and also has a hang up button on it, so it's pretty much back to the original problem.
I know that there's many custom apps out there that can circumvent this issue but i like the stock lock screen (with slider), i don't need another one.
What i need is an app that automatically locks my screen using htc's "slide to unlock" screen after i accept incoming call or after my outgoing call is connected.
If anyone can help me with this i would apreciate it.
why not try s2u2
it has ability to lock after call is connected
do u have something in way of proximity sensor? case or screen protector? i had similar problem but after making bigger hole in screen protector it works 100%
@brkix: i would like a solution that uses the stock lock screen if possible
@lake: i have nothing of the sort, but i confirmed in several forums including this one that the proximity sensor is not 100% reliable
I exactly have the same problem. in my case I want to place a call then want to put the phone in its case while training or running whatsoever and I would really appreciate of being able to lock the keys in order to avoid accidental touching.
schlox said:
I exactly have the same problem. in my case I want to place a call then want to put the phone in its case while training or running whatsoever and I would really appreciate of being able to lock the keys in order to avoid accidental touching.
Click to expand...
Click to collapse
man said everything
+1
SmartLock, offers incall and outcall lock. This may be your best option.
This CAB will lock the hardware buttons when you are in a call if that helps
http://www.cabcache.com/cabs.asp?cab=29
Do you have hair covering your ear?
Without wearing any head wear my sensor works 100% perfect.
Per advice in the second post, I've yesterday installed s2u2. Mates, this program works really good and answers my necessities. All I had to do was to put a short cut of the application to my main screen. Then, I just lock the device by tapping the lock button during a call.
There's even an option existing to lock the phone automatically when the backlight is off and/or during a call directly.
wingm4n said:
Hi,
... I've been manually locking the screen during calls ...
Click to expand...
Click to collapse
Oh well! Please, tell me how you do it!
I'd pleased if at least I could manually deactivate the screen in order to avoid touching button with my cheek!
I've been trying to find an option to lock screen during a call without succeed.
Thanks,
Cheers!
I have the same problem. This part fails.
Sorry, but I insist... wingm4n: how do you lock the screen during calls?
I still haven't been able to find such option
Cheers,
Up....
Hit start then lock(at bottom left side of screen) after dialing or answering a call.
i have same issue...not with keylocks but with the screen!!!almost every time i make or receive a call with my phone in my pocket or by ear hd2 make itself an other call or push lots of function..and this is very annoying!!!i don't like s2u2...really doesn't any solution exist for solve this problem???
thank you!
Cheers!!
Smartlock
Take a look at this:
http://forum.xda-developers.com/showthread.php?t=505032
It locks the screen during calls, and has some other settings as well. I've been using it for a while and it seems to work just fine. And best of all, its free.
in s2u2 settings, just set: "lock on talk" and deselect "lock device". in this way...lock screen will work only in a call. that's it
I used to have such problem during my first uses with the HD2, I would realize because all of a sudden I heard keypad tones (and so did the other person ) while hitting the dialer with my cheek.
After that, I started noticing IF the proximity sensor triggered or not.
It's not really "idle", it's just very "picky", you actually need your ear to cover it, and not just your head being in its way... I took te habit of checking the phone display with the back of my eye to see if it's on while I answer a call, and if it is all I need to do is to move it on my ear so I touch the area with the proximity sensor the display turns off again. Works for me practically 100% of the times now.
How to turn this off
I have a HD2 running the energy rom and when a call is connected it locks the screen. But I use google voice and need to be able to enter my pin. Anyone know how to get the screen not to lock during a call.
Hi, I'm having trouble whilst in a call on my HTC HD2. I'm using a set of headphones with my handset, so when I answer a call my phone stays in my pocket. What I dont understand is when you go to unlock the phone you have to slide it, great. But when your in a call you only have to press unlock??? Which happends quite a lot if it's still in your pocket. It's really getting to me now after a few weeks of use. I've even tried going to the start menu and locking it from there and you get the same scenario... PLEASE HELP.. there must be a way round it ? APPS?
Thanks in advance
Scott
I'll take it as theres no replys that its just a **** part of the phone...
Solved
Just thought id let people know that I found an app for the problem I had.. and it was free. Its called Curtain Call.
hi, threads are washed away fast here. another option is to use S2U2, its a screenlock program also free. it can lock the screen when you pickup a call.
mad
I use S2U2 to lock the screen whilst in a call...it works like a charm
So after having phone for 10 days now i find that it likes to unlock him self in my pocket, and if i go near my pocket with my fingers, or if its faced down so it touches my body, screen reacts , unlocks and does stupid stuff on phone.
My question now is: Is it possible to make some applicaiton, that would disable unlock on hard Menu button, and any on screen unlock patterns, but just phone can be unlocked by pressing optical trackball down(which is nearly impossible to press in pocket because of its nice positioning)
And please dont suggest me unlock patterns or pins, because i just dont like them.
I agree, i experience the same problems,
and I would suggest to this idea, that if it would be possible to implement ability remapping of the on/off key ( at least the time needed to push the key ) to turn screen on. because i experience turning the phone on in my pocket by selfpushing the on-off.
and to be honest, i like to use the screen with my fingers, not using the optical trackball at all an sometimes when i scroll with fingers, it interferes when my finger slips, or rests.
so my suggestion. to increase the time needed to push the on/off button to make screen active if possible
to make the optical trackball push make unlock the screen.
and an ability to disable optical trackball scroling ( not pushing, just disabled scrolling )
I had same problem , way i got around it,
put a lock pattern on your screen, but also add a widget to set the lock pattern on/off, that way when your going out with the phone in your pocket you set the lock to on and it wont do anything. when your at home,turn it off to get easy access.
Yeah, that works, but is not smooth.
hate the lock pattern.
the ideal case would be by on home page to disable on off button and.
with long push optical trackball to lock/unlock screen.
i dont understand how does it happen for you guys, do you never use power button to put it on sleep? i had this phone for pretty much a month now and it hever happened to me even when was wearin fairly tight jeans.
btw try lockpro app from the market it is paid though unfortunately
cez10 said:
i dont understand how does it happen for you guys, do you never use power button to put it on sleep? i had this phone for pretty much a month now and it hever happened to me even when was wearin fairly tight jeans.
btw try lockpro app from the market it is paid though unfortunately
Click to expand...
Click to collapse
+1, never happened to me too, i guess you guys set the screen to not turn off? lol.....
even if the phone is ringing, i can still take it out of my pocket without it being answered....well i must say it's in a pouch too....maybe thats a solution to your problem....
I think it depends on how tight your trousers are maybe? if the button is pressed, and you pull it out the slider slides down??
Just a guess
Lol yea and if your pocket is actually your underpants, since my phone won't react to any touch with fabric between my skin and the screen.
My suggestion is that you grow some hair on your legs (or stop shaving), then you will have no problems.
And yea I have never had this problem in the 2 weeks or so of ownership. Although I do put them in my pocket where it is surrounded by a layer of cotton being the lining of the pocket, so that it is impossible for my skin to touch the screen. Not sure how your pockets work?
Use the unlock pattern.
Menu/settings/security/
this way it cannot unlock itself unless you draw the pattern, plus it helps if anyone picks up your desire wthout you knowing.
P.s I have never had an issue with the screen unlocking in my pocket, holder or anything else.
As i wrote on end of my strating post. I DO NOT LIKE unlock patterns. It doesnt prevent phone to turn on, and + its damn ugly.
To repeat ones more. I would like a way to disable screen ON using main power button, and set it so it only turns on by optical trackball click(not unlock directly, just to turn ON screen).
I'm using nice leather case for phone, but lots of times i push it in i turn on the screen. + with other in pocket random stuff which i explained..
OnlinePredator said:
Lol yea and if your pocket is actually your underpants, since my phone won't react to any touch with fabric between my skin and the screen.
My suggestion is that you grow some hair on your legs (or stop shaving), then you will have no problems.
And yea I have never had this problem in the 2 weeks or so of ownership. Although I do put them in my pocket where it is surrounded by a layer of cotton being the lining of the pocket, so that it is impossible for my skin to touch the screen. Not sure how your pockets work?
Click to expand...
Click to collapse
Well it happens to me sometimes. If I press the lock button and then slide the phone up from my pocket while the screen is turned towards my leg, it unlocks.
The desire touch screen actually works trough thin fabric (like the one they make pants pockets from). Try putting your shirt between your finger and the screen. You'll see it'll work.
unlock bug?
ivicask said:
As i wrote on end of my strating post. I DO NOT LIKE unlock patterns. It doesnt prevent phone to turn on, and + its damn ugly.
To repeat ones more. I would like a way to disable screen ON using main power button, and set it so it only turns on by optical trackball click(not unlock directly, just to turn ON screen).
I'm using nice leather case for phone, but lots of times i push it in i turn on the screen. + with other in pocket random stuff which i explained..
Click to expand...
Click to collapse
plus isn't there still a bug in 2.1 where if you put the unlock pattern in wrong 5 times you can't unlock your phone and it doesn't accept your google account password?
ivicask said:
As i wrote on end of my strating post. I DO NOT LIKE unlock patterns. It doesnt prevent phone to turn on, and + its damn ugly.
To repeat ones more. I would like a way to disable screen ON using main power button, and set it so it only turns on by optical trackball click(not unlock directly, just to turn ON screen).
I'm using nice leather case for phone, but lots of times i push it in i turn on the screen. + with other in pocket random stuff which i explained..
Click to expand...
Click to collapse
It is not possible. There was a big thread about this in the HTC Hero section. It needs the source code to be modified.
Not sure what you mean OP, my phone is in my pocket everyday and also inside a pouch, basically when i want to lock my phone i hit the power button and it will go into lock mode with the screen off, when i want to start it again, i press the power button and this displays a screen which is locked, i then have to move the slider down in order to unlock it, based on what you are saying i am finding it hard to imagine how it is unlocking in your pocket so can you confirm that your phone acts in the same manner as mine does and please explain more on how this is unlocking please.
haggisuk99 said:
Not sure what you mean OP, my phone is in my pocket everyday and also inside a pouch, basically when i want to lock my phone i hit the power button and it will go into lock mode with the screen off, when i want to start it again, i press the power button and this displays a screen which is locked, i then have to move the slider down in order to unlock it, based on what you are saying i am finding it hard to imagine how it is unlocking in your pocket so can you confirm that your phone acts in the same manner as mine does and please explain more on how this is unlocking please.
Click to expand...
Click to collapse
Well i do know what OP means. I had my Desire one day and accidentally denied 4 out of 5 calls by taking the desire out of my pants. I make a habit of putting my phone up side down, screen facing inwards inside my pocket. So, on an incoming call the Desire shows the vertical slider, which is slided upwards by taking the phone out of your pocket, thus denying the call.
It's the most stupid design for a lock screen i've ever seen, and it could have been avoided if only one HTC engineer had made a few test calls to anothers Desire in his pants.
I installed Lock 2.0 which gives a horizontal slider on the lock screen, and which brings back the default accept and deny on-screen buttons. Still not perfect, but much better than the vertical slider.
+1 for the previous post. thx for the lock 2.0 app tip. I will download and try asap.
it does a lot of unwanted stuff in my pants...incl. self unlocking, call denying. etc..
shame that the unlock cant be easily recoded to the optical button.
Optical click unlock is already in the Cyanogen rom for desire.